DRILLING (M.S) 50
DRILLING (C.I) 60
BORING 80
TAPPING (M.S) 25
TAPPING (C.I) 30
DRILLING HEAD
SPINDLE NOSE MT-5
SPINDLE NOS OUTSIDE DIA-METER 80
SPINDLE SLIVE DIA-METER 85
TRAVEL OF SPINDLE 240
NO SPINDLE SPEED â?? MIN/MAX 10
30-1500
NO POWER FEED 6
RANGE OF POWER FEEDS 0.08-0.6
POWER
DRILLING HEAD 5 - HP
MOTOR 1440 â?? 2800
RPM
ELEVATING MOTOR FOR ARM 2-HP
1440 â?? RPM
HYDRAULIC CLAMPING MOTOR --------
WORKING RANGE
COLUMN DIAMETER 300
DIST. FROM SPINDLE TO BASE MIN/MAX 300x1200
DIST FROM COLUMN TO CENTER MIN/MAX 450x1250
DRILLING HEAD TRAVELS 680
DRILLING RADIUS 400x1400
TRAVELS OF ARM 900
BASE PLATE
HEIGHT OF BASE PLATE 200
WORKING SURFACE 700x1100
NUMBER OF T-SLOT 3
WIDTH OF CAST SIDE 20 MM
OVER ALL DIMENSION (L*W*H) 1790x1000x2300
WEIGHT
APPROXIMATE 3000 KG.
CAPACITY 20
DRILLING (M.S.) 20
DRILLING (C.I.) 20
TAPPING CAP. 10
DRILLING HEAD
TAPPING SPINDLE M.T - 2
QUIL MOVEMENT 120
SPEEDS
NO.RANGE OF SPINDLE 8
SPINDLE SPEED MIN / MAX 80 TO 3500
FEEDS
NO.RANGE OF FEED MANUAL
WORKING RANGE
DIST.FROM SPINDLE CENTRE TO COLUMN FACE 200
MAX. DIST. FROM SPINDLE TO BASE PLATE 900
MAX. DIST. FROM SPINDLE TO WORK TABLE 650
WORKING TABLE
TABLE DIAMETER 250 X 250
BASE PLATE & COLUMN
COLUMN DIAMETER 74
BASE PLATE 480 X 310
NO. OF â??Tâ?? SLOTS 2
POWER
DRILLING MOTOR 0.5 KG , 1400 RPM
WEIGHT (KGS)
APPROXIMATE 110 KG.
V BELT
NO. A - 44
Maximum Drilling diameter: 125 to 150 mm
Distance of spindle axis column: 570 to 4000 mm
Spindle nose & working surface: 750 to 2500 mm
Vertical travel of radial arm: 1250 mm
Travel of spindle head along arm: 2580 to 3400 mm
Column diameter: 700 to 800 mm
Spindle diameter: 112 to 142 mm
Spindle travel: 500 to 560 mm
Spindle speed: 8 to 1000 RPM (22 step)
Spindle feed: 0.06 to 3.2 mm/rotation (16 step)
Size of work table: 800x1250
Motor power: 15 to 18.5 Kw
Weight: 20000 to 28500 Kg
Maximum Drilling diameter: 75 to 100 mm
Distance of spindle axis column: 450 to 2500 mm
Spindle nose & working surface: 400 to 2000 mm
Vertical travel of radial arm: 800 to 1000 mm
Travel of spindle head along arm: 1550 to 2000 mm
Column diameter: 450 to 550 mm
Spindle diameter: 85 to 104 mm
Spindle travel: 400 to 450 mm
Spindle speed: 20 to 1250 RPM (16 step)
Spindle feed: 0.04 to 3.2 mm/rotation (16 step)
Size of work table: 630x800 to 800x1000 mm
Motor power: 5.5 to 7.5 Kw
Weight: 7000 to 11000 Kg
5726 Drilling Machines Tools Suppliers
Short on time? Let Drilling Machines Tools sellers contact you.
Maximum Drilling diameter: 40 to 65 mm
Distance of spindle axis column: 320 to 1600 mm
Spindle nose & working surface: 90 to 1220 mm
Vertical travel of radial arm: 500 to 580 mm
Travel of spindle head along arm: 500 to 1250 mm
Column diameter: 300 to 350 mm
Spindle diameter: 60 to 79 mm
Spindle travel: 240 to 315 mm
Spindle speed: 75 to 2000 RPM (6 to 16 step)
Spindle feed: 0.1 to 3.2 mm/rotation (3 to 16 step)
Size of work table: 400x350 to 500x630 mm
Motor power: 1.5 to 3 Kw
Weight: 1800 to 3500 Kg
We supply drilling spools that are in line with API specification 6A. Drilling spools allow the smooth circulation of mud during drilling operations and usually have the same nominal top and bottom end connections. Side outlet may differ from each other. Top, bottom and side end connections can be hub end or flanged.
Specifications:
Working Pressure: 2000 psi~20000 psi (14Mpa~140Mpa)
Working Medium: crude oil, natural, mud
Temperature Ratings: -46~121â??(LU)
Material Class: AA~HH
Product specification levels: PSL1~PSL4
Performance levels: PR1~PR2
We specializes in drill bits, drill pipe, Mud pump and stabilizers for water well, oil field, construction, geothermal, directional boring, and underground foundation work all over the world. Our purpose is to sell the best quality products at the lowest possible price. We are professional supplier of new and used(rebuilt) drill bits used for oil filed, water well. Including tricone bits,PDC bits and drill pipe. Various of model and dimension available. Good condition and reasonable price. Product Description: Steel teeth Bits 114-117, 127 Soft Formation Tooth Bits The 114-117 bits are used to drill low-compressive strength, soft formation. Long projection tooth lengths are used on high offset cones to provide the greatest penetration rates possible. Wear-resistant hard facing is used to control tooth wear. On the softest bits type this hard facing completely covers the bit teeth. 127 Medium-Hard Formation Tooth Bits The 127 bits are used to drill high-compressive strength, medium hard formations. Short projection teeth with reduced crest length are used in this series of bit designs. Durable hard facing is applied to reduce tooth wear. Medium hard with high compressive strength and hard streak (hard shale ,sandstone , limestone, etc.) 437 Soft Formation TCI Tricone Bits The 437 TCI bits are used to drill low compressive strength, very soft formations. TCI bits maximize the use of both conical and chisel tungsten carbide inserts of large diameters and high projection. This cutting structure design, combined with maximum cone offset, result in high bit penetration rates. The deep intermesh of cutter rows prevents bit bailing in sticky formations. 517 Medium Formation TCI Tricone Bits The 517 features aggressive chisel tungsten carbide insert on the heel rows and inter rows. This design provides a fast drilling rate and added cutting structure durability in medium-to-medium hard for-mationes. The HSN rubber O-ring provides adequate sealing for bearing durability. 637 Hard Formation TCI Tricone Bits The 637 bits can be used to drill hard and abrasive forma-tions. Wear-resistant tungsten carbide inserts are used in the outer rows to prevent loss of bit gauge. Maximum numbers of hemispherical-durability and long life. 617 Medium-Hard Formation TCI Tricone Bits The 617 feature robust chisel tungsten carbide inserts on the heel row and conical on the inner rows. This design provides a fest drilling rate and added cutting structure durability in medium to medium hard formations. The HSN rubber O-rin provides adequate sealing for bearing durability. Plywood case or according to the conform order.
Riprap, also known as rip rap, rip-rap, shot rock, rock armor, or rubble, is man-placed rock or other material used to armor shorelines, streambeds, bridge abutments, pilings and other shoreline structures against scour and water, wave, or ice erosion
Description:
Mud Cleaner is the second stage and the third stage solids control equipment which is a combination of Desander, Desilter and underflow shaker shaker. Comparing with traditional separate Desander and Desilter, the mud cleaner has a higher cleaning function. The Underflow Screen equals another shaler shaker which receives the waste out from the cyclone nozzle for additional processing. So that mud cleaner could recover more valuable drilling mud. Mud cleaner is the ideal device of the second class and the third class solid control to treat the drilling mud.
Description:
The Mud guns are meant to provide supplemental or primary mixing in mud tanks depending on the number being used and the pit size. They are best used in tank corners to keep solids from settling and a mud agitator is placed in the tank center.
Description:
Mud Agitator, less than 5.5 kW drilling mud Agitator adopts the blender cycloid speed reducer, and it is applied to the drug liquids mixing tank. This mud agitator has the advantage of compact structure so it occupies small area.Ã?Â
SourcEEZ is a multi product Indian sourcing agency which handles END TO END sourcing operations. Right from vendor analysis and selection, to overseeing the course of production, and to finally warranting a smooth sail for your products, we ascertain that you have a stress-free grip on the procurement process as a whole.
The Manual tongs are necessary tools applied to make up and break out pipes. By changing the lug jaws and latch steps the manual tongs can hold different size of tongs.They are designed and manufactured according to API 7K for well drilling equipment.
The B type manual tongs are includes B type, SB type, and DB type, SDD,LF, Type C, workover tongs, WWC, WWB,AAX, Casing tong, Extended casing tons.
1.Increased rate of penetration.
2.Better hole deviation control.
3.Reduction in drill string failure rate.
4.Reduction in wear and tear of the swivel, Kelly, and rotary drives.
5.Reduction in fuel cost, since compared to rotary drilling, less energy is required to power a downhole motor.
6.Big torque, high effective, wide flow rate range, running stable and long using time.
7.API Spec. Standard
1.API 7-1 Standard connection
2.Tricone bit is suitable for any rock formation.
3.Tricone bit is versatile and can handle changing formations.
4.PDC Main cutters are high performance PDC cutters to insure service life of the bit while improving ROP.
5.Hydraulic system of the bit is optimized using dynamic flow pattern simulation technology to enhance cleaning and cooling effects of the bit to effectively prevent bit from balling.
1. The drill rods comply with the provisions of API SPEC 5D & API SPEC7.
2. The grade of steel are determined according to the requirements of Group 1 & Group 3 of API SPEC 5D.
3. Drill pipe joints at the same level comply with the provisions under the Standard API SPEC 7.
4. Standard pipe size range: 2-3/8â??~6-5/8â??
5. Hardbanding: The wear rate is less than 6% of that of bare tool joint, which can prolong 3 times of the tool joint service life. Good property of friction-reduction, which can reduce the casing wear to the least, and its wear to casing is less than 11% of that of bare tool joint. Reduce the torque of drilling string.
6. Widely used for oil, gas, water well and geothermal fields in Turkey, Poland, Japan, Singapore etc.
Kellys are manufactured with one of two drive configurations, square or hexagonal. Square kellys are furnished as forged or machined in the drive section. Hexagonal or fully machined square kellys are machined from full length quenched and tempered round bars.
Square Kelly and hexagonal kellys are fabricated as per requirements of customers. The kellys are made of AISI 4142H-4145H forged or rolled alloy structural steel. Quenching plus tempering thermal treatment will be conducted over the whole length. Its Brinell hardness can reach 285-341 on the basis of such thermal treatment. Charpy impact energy: >or =54J. The formulated process can ensure that the misalignment of the hole reaches the standard wall thickness. Kelly bars are manufactured according to API-7-1 Spec.
1. Hardness range of 285 to 341 BHN and a charpy impact value of 40ft/lbs are guaranteed for evenly distributed 16 points in any cross sections at room temperature.
2. Connections as phosphate coated father machining to protect the threads from corrosive elements and to prevent galling upon initial make -up. Thread roots are cold rolled on API and H0-90 connections.
3. Pressed steel thread protectors are supplied to all drill collar that are equipped with standard connections.
4. Manufactured strictly according to API standard.
5. Widely used in oil, gas, HDD and geothermal field.
1.Made of 4145H alloy structural steel.
2.Production complies with the provisions under the Standard SY/T 5146-1997. Connector screws comply with the provisions of the Standard API SPEC 7-1.
3.The tube section has a larger diameter at mid length to protect the heavy weight drill pipe from wear.
4.Hardbanding and Internal Coating can be provided on customer request.
5726 Drilling Machines Tools Suppliers
Short on time? Let Drilling Machines Tools sellers contact you.
