Hss circular saw blade are made of m2/m35/m42. The heat treatment is adjusted using proven methods for each material so that the tools have excellent cutting properties.
Out diameter: 50-600mm, bore: 20-50mm thickness: 0.5-6mm Condition: annealed material: m2 /m35/d2 surface: polished or not Application : used for processing circular knives, circular saw blades,
TCI cone bit used in oil drilling, water well, coal field exploration and development of engineering applicationsï¼? apply to soft hard staggered formation, such as soft shale, clay, gypsum, limestone, gypsum, sandstone, conglomerate, dolomite, sandstone, etc .
Tci cone bit used in oil drilling, water well, coal field exploration and development of engineering applicationsï¼? apply to soft hard staggered formation, such as soft shale, clay, gypsum, limestone, gypsum, sandstone, conglomerate, dolomite, sandstone, etc .
TCI cone bit used in oil drilling, water well, coal field exploration and development of engineering applicationsï¼? apply to soft hard staggered formation, such as soft shale, clay, gypsum, limestone, gypsum, sandstone, conglomerate, dolomite, sandstone
TCI cone bit used in oil drilling, water well, coal field exploration and development of engineering applicationsï¼? apply to soft hard staggered formation, such as soft shale, clay, gypsum, limestone, gypsum, sandstone, conglomerate, dolomite, sandstone
1. Scope Model DYFZ-A mechanical stage tool is a special tool used to complete the cementing operation in two times. Mainly used in the following circumstances. 1.1. Excessive injection of cement at one shot. 1.2. The formation cannot bear the gigantic fluid pressure. 1.3. Packoff special strata. 1.4. Avoid the occurrence of annual air channeling after the cementing job. 1.5. The considerable temperature difference between the upper and lower section makes it rather difficult to adjust the slurry performance. 1.6. Two-stage cementing for deviated and horizontal wells 2. Structure Model DYFZ-A mechanical stage tool mainly consists of two-stage coupling (body), shut-off baffle, first-stage plug, Free-fall opening plug and closing plug 1. An anti-rotation device is specially developed to prevent the synchronous rotation of closing sleeve and bits. 2. A particular structure is developed to prevent the possible pre-shutoff of closing sleeve. 3. In the closing sleeve of closed circulation hole, close the locking mechanism to prevent closure put on the back, to achieve permanent closure. 4. All accessories, made from premium quality rubber or aluminum material, have very good anti-rotating mechanism that makes drillout easy. 5. Free-fall opening plug and pumping-down opening plug are available to realize mechanical opening. 6. The ID. of upper/lower sub should be the same as that of casing, but smaller than that of closing sleeve, which protects the clos Specifications(in),7" Opening Pressure(Mpa),7 Closing Pressure(Mpa),5.5 Sealing Capacity(Mpa),,25 Rated Load(t),180 Connection Thread,API 7" Max. OD. (mm),208 Drill-out ID. (mm),157 Overall Length (mm),990 Length of first-stage plug (mm),320 Length of closing plug (mm),280
Insoll Tools PCBN Inserts (Tipped CBN Inserts) are effectively applied in many industries, eg: automotive and bearing industry. 3 grades are supplied: ITS700, ITS750, ITS950. ITS700-for high speed machining grey cast iron. Roughing/semi-finishing light interrupted cutting. ITS750-for roughing and semi-finishing cast iron. ITS950-for continuous roughing and semi-finishing cutting high hard steel (HRC45-65). Because of its thoroughly brazed solid corner, Insoll Tools PCBN inserts series with many advantages: More flexible clamping methods; Higher machining precision; More cutting edges.
Full top PCBN inserts possess excellent hardness and thermal stability and bears 1300 degree of cutting temperature, which is mainly used for machining Hardened Steel with HRC50-60 hardness. For example: carbon tool steel, bearing steel, die steel and high speed steel and so on, gray cast iron, nodular cast iron, chilled cast iron and Ni-baseã?�Co-baseã?�Cr-baseã?�Fe-base high temperature alloy. Insoll Tools supply 3 grades PCBN inserts: ITC10-for high speed machining grey cast iron. Roughing/semi-finishing light interrupted cutting. ITC20-for roughing and semi-finishing cast iron. ITC30-for continuous roughing and semi-finishing cutting high hard steel (HRC 45-65).
Rich metal is a young but professional end mill vendor, focusing on improving and providing customized end mill, especially tungsten steel endmill. Rich metal insists the values of â??integrity, service, innovation and progressâ?�. Standing with these values, we commit ourselves to bringing the best products to our clients. We have won good reputation and strong trust from business partners in america and europe and at domestic market. 2013 we started rich metal brand in international trading. Material: tungsten carbide (yg, yt, yw) Hardness: 45-68hrc Unit price: negotiable Moq: 50pcs
Drilling Machine are one of those powerful instruments which are generally apparent due to its constant control and accessible as a powerful instrument. It is one the most talented or versatile hardware tool which is utilized in households, factories, workshops and industries. We can describe it as a small friend of carpenters, mechanics and your if you does it.
Power input 800 w Chuck capacity 1.5-13 mm Max torque 22 nm No load speed 0-3000 rpm Beats per minute 0-54000 bpm Max. Drilling capacity Wood 32 mm Steel 13 mm Masonry 16 mm Weight 2.4 kg
Redial drilling machine With 1900 mm length arm
The drill collar is used between the drill pipe and the bit in the drill stem. It is used to put weight on the bit so that the bit can drill. Materials: Drill collars are manufactured from AISI 4145H modified steel, and are supplied in the "as rolled" surface finish condition. Alternative surface finishes are available. Trepanning and Heat Treatment: Drill collars are trepanned and drifted to API Spec 7-1. Full-length heat-treatment processes ensure that mechanical properties meet or exceed API Spec 7-1 requirements. A hardness range of 285-341, Brinell hardness and Charpy "V" notch minimum impact strength of 40 ft-lb at 70 F are guaranteed one inch below the surface. Traceability: Drill collar material and process traceability are maintained from receipt of the mill's certified raw material to completion of manufacturing. Serial numbers are die stamped on bar bodies. Rigid Inspection Procedures: We inspect all our drill collars to ensure compliance with API SPEC 7-1 standards. These inspections include visual dimensional checks as well as ultrasonic inspections over the entire body of the drill collar. Rolling: Drill collar thread roots, as well as elevator recess upper radius, are cold-rolled. Cold rolling creates a compressive recess upper radius stress condition that increases fatigue life by minimizing crack initiation. Phosphate-coated or Copper Plating: All connections are phosphate-coated or copper plated to improve resistance to corrosion. Slip Groove, Elevator Groove and Size: Huanjie offers optional slip and elevator recesses to improve handling efficiency and safety. Unless otherwise specified, slip and elevator recesses are machined in compliance with API spec 7-1 guidelines. Thread Protectors: Our company offers steel, cast steel and plastic steel thread protectors for its drill stem products.
Description Drill pipe joint acts for conversion and connection of drill stem component in petroleum, natural gas and geology drilling work. It is used mainly for connecting of upper drill tools and lower drill tools during drilling operations. Cross-over sub is API standard Material is AISI 4145H chromium-molybdenum steel. We can offer Kelly cross-over sub, Drill pipe cross-over sub, Interim cross-over sub, Drill collar cross-over sub, Drill bit cross-over sub, Swivel cross-over sub, Fishing cross-over sub, etc. All connections are phosphatized, coated with lubricant and provided with thread protectors. All tool joints should be inspected at full length by fluorescence magnetic particle and ultrasonic method. Tool joints are for pipes from 2 3/8" to 6 5/8", grade is E 75, G 105 and S 135; upset style is EU, IEU or IU. Specification Material: AISI 4145H premium alloy steel Upset style: EU, IEU or IU Application: 2 3/8" ~ 6 5/8" dill pipes Tool joint connection DP nominal weight lb/ft Steel grade O.D.(in) I.D.(in) Pin tong space(in) Box tong space(in) Pin/Box bevel diameter(in) NC31 10.4 G105 4 1/8 2 7 9 3 61/64 S135 4 3/8 1 5/8 7 9 3 61/64 NC38 13.3 G105 5 2 7/16 8 10 1/2 4 37/64 S135 5 2 1/8 8 10 1/2 4 37/64 NC46 16.6 X95 6 1/4 3 7 10 5 23/32 G105 6 1/4 3 7 10 5 23/32 S135 6 1/4 2 3/4 7 10 5 23/32 NC50 19.5 X95 6 5/8 3 1/4 7 10 6 1/16 G105 6 5/8 3 1/4 7 10 6 1/16 S135 6 5/8 2 3/4 7 10 6 1/16
1.Mud pump liner type: bi-metal liner, ceramic liner 2.Mud pump liner standard: api 7k Mud pump liner description: 1. Our company could supply all spec premium liners and ceramic liners used in various brands of mud pumps. 2. Our premium liners are made of a forged steel outer shell and a high chromium iron inner sleeve. The out shell is centrifugally forged with high quality carbon steel, with tensile strength > 610mpa, yield strength > 450 mpa, elongation >17%, hardness hb -180-200; the inner sleeve is centrifugally forged with high chrome iron alloy, with hardness over hrc62 after heat treatment. Each liner is machined to close tolerances to assure ease of installation and long liner life with the inside diameter of these premium liners honed to a mirror-like finish for smooth even wear during the life of the liner. It could serve more than 800 hours. 3. Our ceramic liners are made of a forged steel outer shell and a ceramic inner sleeve. We can supply zirconia(zro3) sleeves as well as alumina(al2o3) sleeves. The ceramic liners are mainly used for well drilling and geological explorations especially widely used in harsh oil mining environment, offshore well&gas exploration etc. It serves a 5 to 10 times longer life than metal products, and will cut down the mining cost of more than 50%. -
Cement basket is an effective aid in retaining and supporting the cement where weak formations and stage cementing is encountered. It is designed with flexible bow springs, heat-treated under controlled conditions for maximum strength and uniformity, are welded to slip-on collars and overlapping metal fins for flexibility and strength to support long columns of cement during primary cementing operation -
1.Cutting structure this type TCI tricone bits: The durability of premium tungsten carbide insert is improved with new formulas and new techniques for insert bit. 2.Gauge structure this type TCI tricone bits: Multiple gauge protection with gauge trimmers on the heel of cone, tungsten carbide inserts and hardfacing on the shirttail increases gauge holding capability and bearing life. 3.Bearing structure of this type TCI tricone bits: High precision bearing with two thrust faces. Ball lock the cone. Hardfaced head bearing surface. Cone bearing inlaid with friction-reducing alloy and then silver-plated. Abrasion resistance and seizure resistance of the bearing are improved. 4.Seal and Lubrication of this type TCI tricone bits: Premium O-ring, optimal seal compression and curved seal structure can enhance the seal performance. The pressure compensator system and advanced grease can greatly increase the lubricating reliability . 5.Product Application this type TCI tricone bits: It can receive high WOB in the conventional drilling. It is suitable for various formations by matching cutting structure with different tooth shape, tooth density and tooth exposure height. -
(1)standard: api 5ct (2)size: 2 3/8"-13 3/8" (3)grade: j55, k55, l80, n80.P110 (4type:stc, ltc, btc, eue, nue surface treatment:coating. Protection of thread:thread protector packing: in bundle, by wooden pallet or by steel strip or by the requirements of customer. Pup joints are used to adjust the height of full length tubing or casing strings. They are also used to adjust the depth of downhole tools. Pup joint sets are available in: integral premium thread box-by-pin pin-by-pin with couplings boxed separately pin-by-pin with couplings hand tight pin-by-coupling box flush joint connections Quality is our main competitive advantage the requirements and expectations of our customers must be satisfied quality management is integrated into all our business processes management is responsible and accountable for quality performance quality performance must be assured throughout the supply chain system excellence in quality management is necessary for successful business -
Performance range: Nominal pressure pn: 1.6-25.0mpa(150-1500lb) Nominal diameter dn: 50-700mm(2-28inch) The pigging valve produced in our company is a new device used to clean oil, natural gas, chemicals, water and other fluid transportation pipeline (patent number: zl 97 2 39827.9). It deals with the launching and receiving of the pig, mainly used for pigging in transportation pipeline to ensure the cleanliness in the pipeline and delivery volume, prolong service life of pipeline and separately deliver different products. It has found its wide application in oil and gas field, oil-gas gathering and transportation, warehouse for oil land gas storage and transportation, chemical port, chemical combination storage and offshore platform. For larger diameter pigging valve, the original is not easy to operate for larger opening force on bayonet type fast-opening door, our company has developed a new fast-opening door structure which adopts elastic automatic wedge-caulking locking steel belt and horseshoe double-eccentric center lock mechanism and pressure-relief lock and locking mechanism, to realize easy and flexible opening of quick-opening door of large diameter pigging valve and ensure its safety and reliability. -
