Suitable for either drilling downward or inclined blast holes in medium-hard or hard rock, or for second blasting operation. Centrally grouped control, nimble starting, stable running and easy maintenance.
Model Y6 Hand-held Rock Drill is a light-duty tool designed for quarrying and drilling operations. You may expect satisfactory results with the adoption of this drill either in making 20mm holes in rock and buildings or in the secondary blasting of rock, it is most suitable for drilling in marble and granite.
Y21LY Air leg rock drill/jack hammer is of high quality and low price, with very high cost performance.
Y22LY Air leg rock drill/jack hammer is of high quality and low prices, very high cost performance.
Yt27 air leg rock drill/jack hammer/rock drilling machine/pneumatic rock drill/hand-held rock drill/air hammer/ mining rock drill.
Machine Series Features • Drill depth of 1-20M • Rack and pinion drive • Precision ground hardened guideways • Cast iron bed • Geared headstocks for high torque applications • Modern, efficient design. Machine Configurations • Rotating workpiece, stationary tool • Rotating tool, counter-rotation workpiece • Rotating tool, stationary workpiece. Process • BTA/STS solid drilling • BTA/STS counter boring • Trepanning • Skiving and roller burnishing. Machine Accessories • Precision pressure heads • Vibration dampener carriages • Workholding chucks • Workpiece roller steady • Hinged belt chip conveyor • Coolant chiller or heat exchanger. Tooling Accessories • Drill tubes • Drill tube clamps • Drill bushing systems • Tube seal packing glands • Vibration dampener cartridges. Advanced Options • Fanuc or Siemens CNC • Lantern chuck for pull bore tooling • X-axis actuator for bottle boring. Customer Service • Factory training for machine & tooling • Foundation design & process planning • Installation and startup • Technical support via phone and internet machine connection. Techincal information of ts2180 cnc deep hole boring machine Drilling dia range : ö60-ö130mm Boring dia range : ö80-ö800mm Boring depth range : 1-16m depending on client requirement Trepanning hole dia : ö140- ö400mm Spindle center height : 1000mm Headstock spindle dia : ö100mm Front spindle taper hole : ö120mm, 1:20 Spindle speed range , steps : 1--200r/min three shift Mian motor : 55kw dc motor Feeding speed range : 5--500mm/min stepless speed adusting Dia range of workpiece : ö270--ö1000mm Spindle hole of drilling pole box : ö120mm Front taper hole of drilling pole box spindle : ö140mm, 1:20. Drilling bar box motor : 45kw Drilling pole box speed range and steps : 16--270r/min 12 steps Feeding motor : 7.5kw Cooling motor : 11kwx4 Hydraulic motor : 1.5kw, n=1440r/min Rated pressure of cooling system : 2.5mpa Cooling system rate : 200, 400, 600, 800l/min Machine bearing : 25t--35t. Wooden packing.
On the double flat guide way, it equipped the rolling linear guide way. So it has high move precision and high abrasion proof. The bed is also the cooling box, so it is strengthen the stability of bed and reduce the shake. It equipped the Germany SIEMENS 802D CNC system (or appoint by customer). It is AC motor for the headstock, tow grade and stepless. The bearing of spindle is high precision FAG bearing and it is strong in rigidity and high precision in rotating. The feeding box adopts AC servo motor, stepless, and it is equipped with high precision ball screw. It adopts the hydraulic elements which is stable in capability made in Taiwan (or appointed by customer). It adopt scraps discharging by spindle, it equipped automatic discharge scrap equipment and it is not leak. It can also equipped high efficiency automatic expand-draw back combined tools. It is an ideal machine for deephole processing with high precision and efficiency. Technical information of TS2110 deep hole boring machine boring Dia range: 20-100mm Drilling Dia range :20-40mm Max boring depth : 0.6,1m,1.5m,2m,2.5m,3m Headstock spindle hole Dia:100mm spindle rotation speed ,steps: 2-90r/min feeding speed 10-300mm/min AC servo stepless carriage rapid moving speed:2m/min clamping Dia of workpiece: 30-200mm rated pressure of cooling system:2.5Mpa volume of cooling system: 100,200,300l/min main motor: N=11kW feeding motor:3kw AC servo coolant pump motor:5.5KW x5(3groups) rated pressure of hydraulic system : 6.3MPa. Wooden packing.
CNC Deephole Drilling & Boring Machine is suitable for the drilling, boring and rolling processing of all kinds hydraulic oil cylinder, cylinder and other precision tube fittings, especially for the precision processing of step holes. The hole diameter accuracy of machined workpiece can be up to and over IT7~IT8, and the surface roughness reach Ra0.2~0.3 m. The bed adopts welding steel so that it is strong in rigidity. On the double flat guide way, it equipped the rolling linear guide way. So it has high move precision and high abrasion proof. The bed is also the cooling box, so it is strengthen the stability of bed and reduce the shake. It equipped the Germany SIEMENS 802D CNC system (or appoint by customer). It is AC motor for the headstock, tow grade and stepless. The bearing of spindle is high precision FAG bearing and it is strong in rigidity and high precision in rotating. The feeding box adopts AC servo motor, stepless, and it is equipped with high precision ball screw. It adopts the hydraulic elements which is stable in capability made in Taiwan (or appointed by customer). It adopt scraps discharging by spindle, it equipped automatic discharge scrap equipment and it is not leak. It can also equipped high efficiency automatic expand-draw back combined tools. It is an ideal machine for deephole processing with high precision and efficiency. Tsq 2180 CNC deep hole boring machine Range of drilling hole dia : 40- 100mm Range of boring hole dia : 40- 800mm Sleelve boring hole dia : 140- 400mm Max boring depth : 3-12m one sepcification every each one meter Center height from horizental rail to spindle center : 1000mm Headstock spindle hole dia : 100mm Front spindle taper hole : 120mm, 1:20 Spindle rotation speed , steps : 16-270r/min 12steps Main motor : 45kw Feeding speed : 5-500mm/min ac servo stepless Carriage rapid moving speed : 2m/min Clamping dia of workpiece : 120-800mm Drilling bar box spindle hole dia : 75mm Front spindle taper hole of drilling bar box : 85mm, 1:20. Drilling bar box motor : 30kw Spindle rotation speed , steps of drilling bar box : 82-490r/min 6steps Feeding motor : 7.5kw ac servo stepless Pulling plate fast motor : 5.5kw Cooling pump motor : 5.5kwx4 4groups Hydraulic pump motor : 1.5kw, n=1440r/min Rated pressure of cooling system : 2.5mpa Volume of cooling system : 100, 200, 300, 600, 900l/min. Wooden packing.
Drilling Advanced Drill Holding(SDH technology) Tapping Adapters Rigid type Adaptor (ME) Rigid type Adaptor with length adjustment (MEN) Safety Clutch Adaptor(MES) Safety Clutch Adaptor withlength adjustment (MESN) Tapping Chucks Rigid type chuck (MF) Axial floating chuck (MFLK) Radial floating chuck (MFP) Radial & Axial floating chuck (MFLP) Floating Holders Floating & reaming with extended length version (MGP) Floating & reaming with shorter length version (MGPK).
1. M42/m3 bi-metal construction for heavy duty cutting 2. Variable pitch teeth for faster, smoother cutting and less vibration 3.Cutting depth to 1-1/2"(38mm) and 1-7/8" (34-40mm) 4.Extra charge for the pilot and arbor. Packing with polly bag or packing according customer's request . With carton box and brand name.
Technical Specifications 1.Weight of the main machine: 27kg 2.Overall dimension: 746¡Á315¡Á 229mm 3.Type of engine:single cylinder,air cooled two strokes 4.Cylinder Diameter stroke of piston:5 8 ¡Á 70mm 5. Rotating speed of engine: ¡Ý2450r/min 6.Displacement of engine plston: 185cm3 7.Type of carburetor: hand needle valve,no floating type 8.Ignition system: Controllable silicon contactless system 9. Drilling speed:(mean value of five holes) ¡Ý 250mm /min 10. Max. drilling depth: ¡Ý 6m 11.Fuel consumption: 0.122 /m 12.Tank capacity:¡Ý 1.14L 13. Mixing ratio of gasoline and lubrication oil (in volumes):12:1 14. End of drill rod dimensions: hexagonal2 2 ¡Á 108mm 15. Rotating speed of drill rod:¡Ý200r/min 16. Clearance of Spark plug :0.5 -0.7mm.
Mechanical transmission Electricity clamping Mechanical speed Automatic take-off and landing Automatic feed. Specificationgs z3050f+16/ii Max.Drilling dia(mm) 50 Distance from spindle nose to table surface(mm) 260-1050 Distance between spindle axis and column surface(mm) 360-1600 Spindle travel (mm) 220 Spindle cone 5 Spinde speeds range(r.P.M) 78f= 135f=240f=350f=590f=1100 Spinde speed step 6 Spinde feeding range(r.P.M) 0.10-0.56 Spinde feeding step 3 Rocker rotary angle 360 Main motor power(kw) 4 Movements motor power(kw) 1.5 N.W/g.W(kg) 2800 Overall dimensions(mm) 2170f+950f+2450 .
Mechanical transmission Mechanical clamping Mechanical speed Automatic take-off and landing Automatic feed. Specificationgs z3732 8/9 Max.Drilling dia(mm) ¬8+31.5+ ¼S25 Distance from spindle nose to table surface(mm) 25-870 Distance between spindle axis and column surface(mm) 315-815/915 Spindle travel (mm) 130 Spindle cone 3 Spinde speeds range(r.P.M) 173f=425f=686f=960 Spinde speed step 4 Spinde feeding range(r.P.M) - Spinde feeding step 3 Rocker rotary angle 360 Main motor power(kw) 1.5 N.W/g.W(kg) 870 Overall dimensions(mm) 1800f+700f+2044 Mechanical transmission Mechanical clamping Mechanical speed Automatic take-off and Landing Automatic feed.
Mechanical transmission Mechanical clamping Mechanical speed Automatic take-off and landing Automatic feed SPECIFICATIONGS ZQ3050++-16 Max.drilling dia(mm) 50 Distance from spindle nose to table surface(mm) 260-1150 Distance between spindle axis and column surface(mm) 360-1600 Spindle travel (mm) 220 Spindle Cone 5 Spinde speeds range(r.p.m) 78++++ 135++++240++++350++++590++++1100 Spinde speed step 6 Spinde feeding range(r.p.m) 0.10-0.56 Spinde feeding step 6 Rocker rotary angle 360 Main motor power(KW) 4 Movements motor power(KW) 1.5 N.W/G.W(Kg) 2800 Overall dimensions(mm) 2170++-950++-2450.
Mechanical transmission Electricity clamping Mechanical speed Automatic take-off and landing Automatic feed. Specificationgs z3050f+14/ii Max.Drilling dia(mm) 50 Distance from spindle nose to table surface(mm) 260-1050 Distance between spindle axis and column surface(mm) 360-1400 Spindle travel (mm) 220 Spindle cone 5 Spinde speeds range(r.P.M) 78f= 135f=240f=350f=590f=1100 Spinde speed step 6 Spinde feeding range(r.P.M) 0.10-0.56 Spinde feeding step 3 Rocker rotary angle 360 Main motor power(kw) 4 Movements motor power(kw) 1.5 N.W/g.W(kg) 2400 Overall dimensions(mm) 1950f+810f+2450.
Specification: Deboom's hydraulic static pile driver has the advantage of high mechanization degree,comfortable operation, flexible. THE SPECIFICATION OF DEBOOM HYDRUALIC STAIC PILE DIRVER: Model Unit YZY680 Parameter Rated Piling Pressure (KN) 6800 Piling Speed Fast ( m/ min) 6.2 Low 1.1 Pilling stroke per time (m ) 1.8 Shift Longitudinal (m ) 3.6 Horizontal 0.7 Angle range ( ¡ã ) 11 Rise stroke (m ) 1.1 Max spun pile (mm ) 600 Side piling space (m) 0.8 Comer piling space (m) 1.7 Lift weight (T) 16 Lift moment (tf.m) 80 Power piling (kw) 119 Lift 30 Dimension Working Length (mm) 13500 Working Width 7900 Transportation Height 3100 Gross weight (T).
Ground drill model :60í-25í-80,80í-25í-80,100í-25í-80ú¼150í-28í-130ú¼200í-38í-180,250í-48í-230,300í-60í-280 Drill bit type :twist drill ,auger drill,wedge-shape prismatic drill . Installation of the spiral blade :single spiral blade ,double spiral blade ,half-duplex spiral blade . Production Application: The products are mainly used for root crops planting hole, tree fertilization holes, fences scaffolding staking hole,optical cable marking stake, pile of road marking, mark holes of boundary marking, buried hole of geological survey and geophysical detector, fish on winter ice by drilling holes, etc. With the paper bag and the wooden box
Hole size: 0.08mm--10mm Case size: 25x12mm, 28x11mm, 30x15mm, 25x10mm, 24x10mm, etc. Suitable for drawing platinum rhodium wire, gold wire, silver wire, copper, aluminum, molybdenum, nickel, tined, copper, tungsten, copper aluminum alloy and other nonferrous metal wire material. Tolerance: +/-0.005---+/-0.1 Nib:pcd nib from usa ge, japan sumitomo, etc. Products not listed maybe available by special order.We can also make according to customer's request size, drawing, etc. By plastic bags then by carton box.
Road milling machine spare parts road planing bit Sy980 Hard welding material and special weld-processing technique can make the joint point between the tool shank and the alloy much more firm. The 1.2mm thick snap ring, which is made of flexible steel of high quality, can bear the expansion force for a long time. The washer with a diameter of 44mm which is made of firm elastic steel plate can reduce the abrasion to the apron. This cutter is widely used for maintaining construction of top course including high-grade highway, municipal road, airport, public square and so on. The main construction object is asphalt mixture road surface, it is also used to the napping process of the cement concrete road surface. It applies to road renovation, pavement and repair, and also to mill the road and public square. It used to milling the ditch and dadoing the gutter.
Advanced type of taper drill bits when compared with taper chisel bits and taper cross bits. With carbide buttons hot pressed on bits bodies, it has good drilling performance and life time. Usually used for hard or very hard rock formation. Steel body, made by material 40Cr or 42CrMo, heat treatment with 40-44HRC hardness, has high toughness and wearable character. Tip is made from Low press Sintered, and Suitable Grade Selected according to the Target Projects, Which are to make sure the good performance during working. For Areas Using: Milling minerals Cutting routes Cutting in tunnels . For Machines: The products adapt to the machine with all the performance features such as a high feed rate, a long service life and short tool changing times. Together with the parts supply assurance, a high daily production volume, and above-average economy is guaranteed Specification+¬Such as C31HD, U765, U765HD, U85HD, U82 U84, U92, U94, U47, U47HD etc Package+¬in carton Supply ability:10000pcs/month Delivery time:30days Payment terms:T/T or L/C.
