Product Main Material: Steel, HDPE Quality Control: Inspection Standard: API Q1 Applications: Products are the required parts for oil drill pipes, drill collars or OCTG that can protect the thread of each side of pipe. Mainly thread protectors can prevent your connector threads and pipe end from danagig during handling, transportation and storage.
Jbdw-300c ultralow-temperature automatic impact testing machine is used to test metallic materials to resist the impact to determine the nature of the material under dynamic load performance. It?s a necessary testing machine, not only used in the metallurgy, machine manufacture etc areas, but also used for the science research. Jbdw-300c is computer controlled ultralow-temperature automatic impact testing machine, which adopts pc computer control, this machine can auto-complete the following actions: rising pendulum, hanging pendulum, sending specimen, positioning, impacting, temperature conditioning and computer measurement and calculation, which also can display the results and printed out with high efficiency and high accuracy. After impacting the specimen, the machine can raise pendulum with surplus energy automatically so as to be ready for the next test. Done in a continuous low-temperature impact testing laboratories and a large number of low-temperature impact tests in metallurgy, machinery manufacturing and other industries, this kind of process can reflect its better advantages. Pc machine can display material impact absorption power, impact toughness, pendulum raising angle and test average value, and can print the test data and the average value of the test.
China supplier high quality LAKE Square drive Roller Kelly bushing consists of lower body half, upper body half, roller, roller pin and etc. when the bushing is installed to square kelly or hex kelly, the square part of the lower body half can be fitted in the square of the master bushing. When operating, the rotary table drive master bushing and master bushing drive Roller Kelly bushing and Roller Kelly bushing drive square kelly or hex Kelly to rotate, such is the torque transporting. The lower body half is conically shaped to readily enter the bore of the master bushing and automatically center bushing and drill string within the bore of the master bushing. Inside rollers are journal bearings which are fitted to the roller pin, when kelly rotates and moves downward, the rollers rotates with Kelly, such change sliding friction to rolling friction and minimize the abrasion of the kelly. The bushing is equipped with mud-scrapper assembly to clean the mud. The Square Drive Roller Kelly Bushing provides the following advantages: 1.Pulling out or feeding off string can be done while rotating; 2.Because of its integral construction, it can not fly out and hurts you. 3.The bushing is easily installed into the master bushing, maintaining good alignment; 4.The contact between Kelly and roller is rolling contact, so friction is lower, and weight on bit is accurate; 5.The Kelly has lower wear and has long life.
Product Description 1.competitive price and high quality 2. delivery timly and in stock 3.power:380v 50hz 4.Max.working pressure:34.5MPa(5000Psi ) The control system for surface mounted bop stacks is an important equipment for the control of bop stacks.choke and kill valves in the drilling and workover drilling operations .it has already passed the certificate of spec 16D. Control System for Surface Mounted BOP Stack are from 2 to 14, being suitable for any difficult climate atmosphere. Technical parameter Main parameters as follows: 1.Environmental temperature:-13~40�°C 2, Power: 380v, 50Hz 3, Nominal pressure: 21MPa(3000Psi) 4.Max.working pressure:34.5MPa(5000Psi) 4, Pressure range: 0~14MPa(0~2000Psi) 5, Nitrogen charging pressure of accumulators: 7�±0.7MPa(1000±100Psi) 6, Air supply pressure: 0.65~0.8MPa(93~115Psi) 7, Pressure range of pressure valve: 17.5~21MPa(2500~3000Psi) 8, Hydro-pneumatic pressure switch: 19~21MPa(2700~3000Psi)
Fill and Circulate Tool (hereafter referred to as FAC Tool) is a surface tool used during the casing running operation. The FAC Tool is designed to both fill the casing with drilling fluid while running it in the hole and to enable quick circulation of the casing string at any time without installation of a casing swage. The FAC Tool has features with easy â??to- use , safe and reliable , no leakage and so on, which lightens labor intensity of workers greatly and improves operation environment of well. The FAC Tool is composed of ten parts (shown in figure) , whose main function of components are below: 1. Drill Pipe Connector: The FAC Tool built for top drive rigs connects to the drill pipe threads of the rigâ??s top drive unit via the Drill Pipe Connector. The threads of the Drill Pipe Connector are standard 4 1/2 IF, but crossovers are available for other drill pipe threads. 2. Extension: For applications where long elevator links are used, Extensions are placed between the Drill Pipe Connector and the Mandrel. On the Extension are two Pad Eyes that make it easy to manipulate the Tool around the Rig during rig up or rig down. Also, while the Tool is in use, a Safety Cable attaches to one of the Pad Eyes in the event the Tool should accidentally come loose from the top drive. In place of the Extensions, a Drill Pipe Pup can be used between the top drive connection and the Drill Pipe Connector instead of extension. 3. Mandrel: The Mandrel houses the specially designed Seal Assembly that is used to seal off the casing string. The Seal Assembly has three parts: the Seal Retainer, the Sealing Element, and the Gauge Ring. 4. Seal Retainer: Aluminum part that keeps (retains) the Sealing Element from being extruded upward while circulating. 5. Sealing Element: Elastomeric Seal that seals off the casing for circulation. It is hollow so circulation pressure can energize the seal it creates against the casing bore. 6. Gauge Ring: Tapered Aluminum piece that guides the Seal Assembly into the pipe and has holes to allow energizing pressure into the Sealing Element. 7. Retainer Sub: The Seal Assembly is held in place with the flexible hose. 8. Flexible Hose: The Retainer Sub is also used to connect a high pressure Flexible Hose. This Hose prevents any hard â??stack outâ?? between the FAC Tool and the casing and compensates for misalignment and casing movement during make up. 9. Mud Saver Valve: Below the Flexible Hose is the heart of the FAC Tool, the Mud Saver Valve. It is essentially a two-way check valve. This Valve opens with pressure when the mud pump is turned on and closes when the mud pump is turned off. It also permits flow in the upward direction for releasing pressure.
Specifications: API Spec 11B 5/8"(15.88), 3/4"(19.05), 7/8"(22.23) 1"(25.40) 1 1/8"(28.58) Grade C,D,H,K,KD. Both 25ft and 30ft Length The sucker rod is a steel rod that used to make up the mechanical assembly between the surface and downhole components of a rod pumping system.It is including main grade C and D.Grade H sucker rod made of high quality structural steel is the super strength and developed to suit for deep well, larger pumps and other heavy load.All sucker rods that our company provided standard with API specification 11B,quality class.
1. Standard: API 2. Pressure: 2000psi~20000psi 3. Sie: 3-1/8"~26-3/4" Spacer spool, in accordane with API 6A, have end connectors of the same size, rated working pressure and design. Spacer spool is wellhead sections which have no prevision for suspension of tubular members and which may have no prevision for sealing of tubular members. We manufacture the sapcer spool in all size and pressure ratings suitable for Well Head extension, BOP spacing, and Choke, Kill, and production Manifold applications. We can produce all kinds of API 6A double studded adapter for wellhead use. It is important for wellhead use. It is important device to connect the different flange for wellhead, so the material of the body and studs and nuts shall be conforms the related requirements. The size is in accordance with API flange certification.
Lake can provide the drill pipes for Vemeer and Ditch Witch Drilling rigs, with long life service and good price.
The Products can be supplied: 1. Mud Pump: 8P-80, 9P-100, 10P-130, 12P-160, F-500, F-800, F-1000, F-1300, F-1600, PZ-7, PZ-9, PAH, TEE, W-440, W-446, 3NB350, 3NB-500C, 3NB-800C, 3NB-1000C, 3NB-1300C, 3NB-1600 2.Plunger Pump: TWS600S, TWS2000, DOWILL300, HyT-400. 2. Skid- mounted & Pump Unit for each kinds of pump said above. 4. Spare Parts and Expendable parts: With the specialized & batched production liner, we can supply power end assembly, fluid end assembly and its spare parts, which can be easily matched & exchanged with some international famous mud pump brand.
Deadline anchors, Wireline anchors Anchor Type Weight Indicator System is compatible with various versions of drilling rigs and workover rigs. They indicate and record variation of hook load and weight on bit during drilling and well service for the driller judging the operation situation and obtain proper drilling parameters. Each set of weight indicating system consists of a deadline anchor, a weight indicator and a recorder. Can be used in drilling rig, workover drilling rig etc. Material is High strength steel, extended the service time. 1.5 times pressure and tensile test before leaving the factory, high precision, stability, etc. Two forms, horizontal and vertical. Model JZG18A Deadline Anchor -Max deadline load(Line pull capacity):180kN -With hydraulic load sensor. -Constructed with top-quality steel and proof-tested to 150% of rated capacity. -Accommodate wireline sizes 1'',1-1/8'' or specify. -Designed and tested for high strength, long life and exceptional accuracy. -Floor mount. -In accordance with API Standards, pass API8C Certificate, API ISO9001:2000
Product Description We can produce all types of drilling rods such as HDD drilling rods, oil drilling rods, geological drilling rods, anchoring drilling rods and other special drilling rods, and trenchless special drilling tools such as pilot guide bits, swivels, ream bits, reducer unions,pneumatic pipe-rammer Technical parameter OD of Machine(mm): 260/190 Length of Machine(mm): 1390 Weight(kg): 320 Air Consumption(M3/Min): 3~8 Pressure of Air(MPa): 0.4~0.7 Diameter of Pipe laying(mm): 273\325\426
International Standard: C-Q series: AQ, BQ, NQ, HQ, PQ, BQ3, NQ2, NQ3, HQ3, PQ3 T2 series: T2 76, T2 86, T2 101, others. Standard of China: Single tube series: 36, D46, D48, D56, D59, D60, D66, D75, D76, D77, D78, D91, D92, D93, D94, D95, D96, D98, D100, D110, D112, D130, D132,D152, D171, D173, D225, D245, D279, D325 Double tube series: P36, P46, P48, P56, P59, P60, P66, of P75, P76, P77, P91, P94, P110, P130, P150 Rope series: S56, S59, S60, S75, S76, S77, S78, S91, S95, S96, S98
1. Standard: API 2. Pressure: 2000psi~20000psi 3. Sie: 3-1/8"~26-3/4" Spacer spool, in accordane with API 6A, have end connectors of the same size, rated working pressure and design. Spacer spool is wellhead sections which have no prevision for suspension of tubular members and which may have no prevision for sealing of tubular members. We manufacture the sapcer spool in all size and pressure ratings suitable for Well Head extension, BOP spacing, and Choke, Kill, and production Manifold applications. We can produce all kinds of API 6A double studded adapter for wellhead use. It is important for wellhead use. It is important device to connect the different flange for wellhead, so the material of the body and studs and nuts shall be conforms the related requirements. The size is in accordance with API flange certification.
Product Description 1.competitive price and high quality 2. delivery timly and in stock 3.power:380v 50hz 4.Max.working pressure:34.5MPa(5000Psi ) The control system for surface mounted bop stacks is an important equipment for the control of bop stacks.choke and kill valves in the drilling and workover drilling operations .it has already passed the certificate of spec 16D. Control System for Surface Mounted BOP Stack are from 2 to 14, being suitable for any difficult climate atmosphere. Technical parameter Main parameters as follows: 1.Environmental temperature:-13~40�°C 2, Power: 380v, 50Hz 3, Nominal pressure: 21MPa(3000Psi) 4.Max.working pressure:34.5MPa(5000Psi) 4, Pressure range: 0~14MPa(0~2000Psi) 5, Nitrogen charging pressure of accumulators: 7�±0.7MPa(1000�±100Psi) 6, Air supply pressure: 0.65~0.8MPa(93~115Psi) 7, Pressure range of pressure valve: 17.5~21MPa(2500~3000Psi) 8, Hydro-pneumatic pressure switch: 19~21MPa(2700~3000Psi)
Mud-pulse MWD(Measurement While Driling) was designed to meet various needs of hole diameters,hole size from 6in to 12 1/4 in depending on different MWD sub, flow rates and other drilling requirements. Advantages: 1.Could be fishing 2.Save time , easy to assemble on wellsite 3.Low maintenance and using cost compare with similar products 4.More than 180hours downhoe working time(without gamma ray) This system can be utilized to reduce lost in hole risk. In the event the BHA becomes stuck during the drilling process, the retrievable MWD system can be wireline retrieved, saving the customer the cost of replacing the MWD system. LK-MWD tools can provide information about the conditions at the drill bit. This include: Inclination Azimuth Toolface Downhole Temperature DIP Magnetic field strength Gamma Ray(Optional)
Quick Details Condition: New Warranty: 1.5 years Applicable Industries: Energy & Mining Local Service Location: None Showroom Location: None Video outgoing-inspection: Provided Machinery Test Report: Provided Marketing Type: Hot Product 2019 Place of Origin: Shandong, China Brand Name: Lake Petro Type: Drill Collar Machine Type: Drilling Tool Certification: API Material: Stainless Steel Processing Type: Forging Use: Well Drilling Product name: Non Magnetic Drill Collar Application: Oil Field Usage: Hole Drilling Size: API Standard Size Standard: API 7-1 Thread: API 5B
Quick Details Condition: New Warranty: 1.5 years Applicable Industries: Energy & Mining Local Service Location: None Showroom Location: None Video outgoing-inspection: Provided Machinery Test Report: Provided Marketing Type: Hot Product 2019 Place of Origin: Shandong, China Brand Name: Lake Petro Type: Drill Collar Machine Type: Drilling Tool Certification: API Material: Stainless Steel Processing Type: Forging Use: Well Drilling Product name: Non Magnetic Drill Collar Application: Oil Field Usage: Hole Drilling Size: API Standard Size Standard: API 7-1 Thread: API 5B Length: 9450 Supply Ability Supply Ability: 500 Piece/Pieces per Month Packaging & Delivery Packaging Details Standard Export Package Port Qingdao Or Tianjin Picture Example: package-img Lead Time : Quantity(Pieces) 1 - 10 >10 Est. Time(days) 40 To be negotiated
Main Material Steel,steel-plastic:HDPE Quality Control Follow the API Q1 quality inspectionstandard. Base on the API 5CT Annex I when design the product. Applications Products are the required parts for oildrill pipes and drill color that can protect the thread of each side of pipe.Mainly Thread protectors can prevent your connector threads and pipe end fromdamaging during handling, transportation and storage.
Tool joints of our company are made of modified alloy steel, then fully heat treated. So the mechanical properties in accordance with API specifications, such as strength, hardness and impact strength are gaged to standard. All connections are gaged to API Spec. and phosphatized or copper plated for anti-galling treatment & resistance to corrosion. Specifications: 1.API standard with best price excllent quality 2.in stock or 30 days
Specification: 1. Drill Pipe Wiper 2. Drill Pipe Wipers are made of specially designed rubber compound having tremendous resistance to cutting, tearing and abrasion. They are available for water based and oil based drilling mud. Designed for application.They are available for 5", 3.1/2", 2.3/8" and 2.5/8" drill pipes / tubings. 3.Size for 27/8",31/2" 5" 51/2"drill pipe 4.wiper is designed to clean casing,tubing in oilwell . Advantages: 1. high strength- Resistance, wear- Resistance 2. Resistance to high temperature 3. Absorption oscillation resistance to high speed 4. Resistance to heavy load 5. Internationally advanced quality level, can be designed to meet the specific needs. Description: Material: Butyronitrile rubber is the basic material. The inner steel skeleton is to prevent deformation. Main application: prevent drilling fluid returning from the drilling. Clear drilling fluid on the drill pipe wall to prevent the corrosion of metal. Hardness: 8 to 95 �±5 shore A ,�±3 shore A tolerance specially Color: for rubber, usually black, for silicone, can be in any color as you want Machine type: 50 to 400 tons Mold/samples lead-time: For prototype mold, usually in 7days For mass production mold, usually in 2 weeks For some special molds, can be in 30 days, especially for some automotive rubber molds
