1.Zj40/2250db ac drilling rig is suitable for the exploration of petroleum and gas wells with a depth of 2000-3200m by 127mm drilling rod, or a depth of 2500-4000m by 114mm drilling rod. 2.Ac-dc-ac drive system. 3. Single shaft drawwork, drum notch. Hydraulic disc type brake is adopted as the main, while energy-losing brake or etn brake is adopted as the auxiliary. 4.The rotary table adopts independent drive. 5.Parallelogram seat realizes the low-level installation of table-board equipments and derrick, then rises them up by right of drawwork. 6.The main mechanical components of drilling rig follow the standard of api with marks According to customer's request
Zj30ct trailer-mounted drilling rig is fitted with reliable diesel engine and transmission, 125' (38m) hydraulic telescoping mast, double wheel four-axle semi-trailer. Several patent technical designs and configuration, such as double fast line, hydraulic tong type auxiliary brake, are optional. The rig has following features: reasonable layout, low cost for mobilization, easy site installation, reliable operation performance, and easy maintenance. The rig suits drilling operation of shallow well within 9, 840' (3000m). Driven by double diesel engine and hydraulic transmission. Allison hydraulic transmission. Special semi-trailer chassis with fast transportation and low transportation cost. Air-controlled water-cooling disk auxiliary brake for drawworks is optional. Main parameters Model Zj30/1800ct Drilling depth(4-1/2"dp) ft(m) 9840(3000) Workover depth(3-1/2"dp) ft(m) 21325(6500) Max.Hook load lb(kn) 404640(1800) Drill line dia., in.(mm)/lines ª)1.25(ª)32)/10 Max.Hook speed ft/s(m/s) 4.46(1.36) Overall dimensions in shipping status ft(m) 81.36íß10.83íß14.76(24.8íß3.3íß4.5) Weight lb(kg) 165340(75000) According to customer's request
Electric drill
Electric circular saw.
Name Drill Bit Grinder Feature Be convenient to grind all drill bits with two flutes, unlimited overall length Capability Dia 3 - 19mm Chisel Angle 118 - 140 Dimension 305 x 280 x 230 mm Gross Weight(kg) 11
Name graver grinder Feature Be convenient to grind all drill bits with two flutes, unlimited overall length Capability Dia Hold Max.: 18 mm Dimension 550 x 450 x 470 mm GW/NW(kg) 46 / 60
(Model) Specification ZX-13E Drilling capacity 13 mm Chuck size 13 mm Table travel(mm) 290 Table size 185 x 185 mm Spindle travel 60 mm Distance spindle axis to column(mm) 125 Spindle taper B16 Columm diameter 60 mm Spindle speed range(r.p.m) 540-3100 Spindle speed series 5 Motor power(HP) 1/3 Overall height 730 mm N.G./G.W.(kg) 35/37 Packing case dimension(mm) 680*440*255 In carton or wooden case
Model Z3032 x 7 Drilling capacityú¿mm) 32 Max.tapping dia.(mm) M16 Distance spindle axis to column generating line(mm) 300-700 Columm diameterú¿mmú¬ 150 Spindle taper MT3 Spindle travelú¿mm) 150 Spindle speed range(50Hz)(RíñPíñM) 100-1600 Spindle speed serier 8 Rotary angle of rocker in hirizontable plane(íp) 360 Distance between spindle nose to working(mm) spindle of base(mm) 275-680 Dimension of worktableú¿mmú¬ 250í-250í-250 Dimension of baseú¿mmú¬ 1050í-550í-120 Motor(kw) 0.75 or 1.1 N.G./G.W.(kg) 380/475 Packing dimension(cm) 122í-61í-138 In cartons or wooden cases The dimension is 122X61X138mm
(Model) Specifications ZX7550CW Max.drilling dia.ú¿mm) 50 Max.horizontal milling dia.(mm) 100 Max.vertical milling dia.(mm) 25 Max.boring dia.(mm) 120 Max.tapping dia.(mm) M16 Spindle taper MT4 Distance spindle to table surface(mm) 90-490 Spindle speeds range(r.p.m) Vertical Horizontal 115-1750 (8steps) 80-1300 (9steps) Spindle travel(mm) 120 Table sizeú¿mmú¬ 800í-240 Table travel(mm) 400í-230 Motor(KM) Vertical0.85/1.5 Horizontal1.1 N.W./G.W(kg) 850/1000 Packing dimensions(mm) 1280í-1100 í-2240 1280í-1220 í-2240 In wooden case,and the N.W./G.W. is 850/1000
Outdiamater: 79mm Length: 991 Back adapter thread: API 2 3/8" REG Structure stroke: 127mm Working air pressure: 1.3 MPa-2.5Mpa Mathched bits: COP34, IR3.5" Wooden cases
Technical specification:- -drilling in m.S.:25 -end milling in m.S.:20 -tapping in m.S.:20 -boring in m.S.:30 -spindle hole taper:mt-3 -spindle travel:150 -spindle speeds [rpm x steps]:1002650 x 8 -diameter of ram:72 -spindle autofeed ranges:fine feed -dist. spindle center to column:206 -work table:255 x 460 -longitudinal travel:350 -cross travel:206 -diameter of column:90 -drill-head motor:1 hp / 1440 rpm -head motor v-belt:b-46.
Technical specification:- -drilling in m.S.:25 -end milling in m.S.:20 -tapping in m.S.:20 -boring in m.S.:30 -spindle hole taper:mt-3 -spindle travel:150 -spindle speeds [rpm x steps]:1002650 x 8 -diameter of ram:72 -spindle autofeed ranges:fine feed -dist. spindle center to column:206 -work table:255 x 460 -longitudinal travel:350 -cross travel:206 -diameter of column:90 -drill-head motor:1 hp / 1440 rpm -head motor v-belt:b-46.
Pillar drilling machines 800 kgs 1250 x 700 Cap.12 mm to 65mm
Summary Advantages: Needless to replace the internals of the engine head, just handle the handle to operate it. Easy to operate. More time-saving and effortless. Drilling faster and more efficient. Have reached the tip-top level of the same field now, and allow to be replaced with the same kind of the domestic products. Applications: Available for drilling, splitting breaking, ramming, shoveling. And widely used in mining, road contruction, quarrying and national defense construction, etc. Wooden crate
The pneumatic pick is a tool with compressed air as its power. The compressed air is distributing alternatively through the tube-shaped distributing valve into either end of the cylinder, so that the hammer is reciprocating motion in it, which impacts the tail-end of the pick rod and drives the pick rod into the rock or strata of mine, thus causing them to split into pieces.
The pneumatic pick is a tool with compressed air as its power. The compressed air is distributing alternatively through the tube-shaped distributing valve into either end of the cylinder, so that the hammer is reciprocating motion in it, which impacts the tail-end of the pick rod and drives the pick rod into the rock or strata of mine, thus causing them to split into pieces.
Drill pipe, tricone bit, down the hole hammer s andbit, chain wrenches, drill bit,
Max. Drilling capacity 20 in steel Motor power (rpm) 1.1kw/1000 1.1kw/1400 1.1kw/2880 Spindle speed (rpm) 510, 1000, 1830 750, 1440, 2900 1500, 2880 Spindle travel 100mm Working stroke 80mm(variable) Working area 350mmx340mm Thrust load at 6bar 650kg Distance between spindle to table max. 450mm Distance between spindle center to column front 213mm Distance from table top to base 750mm Hydraulic power pack Motor power rpm 0.75kw/1400 Tank capacity 75lts Pump output 15.6 lpm Operating pressure 30.35 bar Machine size (mm) 1300l x 700w x 1900h
Useful to electricians, articians, fabricators, construction industry for drilling in steel, wood, concrete & stone. Qty.1
Maximum drilling diameter: Up to 4" (100mm) Maximum cutting depth: Up to 4" (100mm) Each cutter is packed in the individiual plastic tube. Special cutters are available as per the buyer's requirements or drawings/samples export cartons
