Maximum Drilling diameter: 125 to 150 mm Distance of spindle axis column: 570 to 4000 mm Spindle nose & working surface: 750 to 2500 mm Vertical travel of radial arm: 1250 mm Travel of spindle head along arm: 2580 to 3400 mm Column diameter: 700 to 800 mm Spindle diameter: 112 to 142 mm Spindle travel: 500 to 560 mm Spindle speed: 8 to 1000 RPM (22 step) Spindle feed: 0.06 to 3.2 mm/rotation (16 step) Size of work table: 800x1250 Motor power: 15 to 18.5 Kw Weight: 20000 to 28500 Kg
Maximum Drilling diameter: 75 to 100 mm Distance of spindle axis column: 450 to 2500 mm Spindle nose & working surface: 400 to 2000 mm Vertical travel of radial arm: 800 to 1000 mm Travel of spindle head along arm: 1550 to 2000 mm Column diameter: 450 to 550 mm Spindle diameter: 85 to 104 mm Spindle travel: 400 to 450 mm Spindle speed: 20 to 1250 RPM (16 step) Spindle feed: 0.04 to 3.2 mm/rotation (16 step) Size of work table: 630x800 to 800x1000 mm Motor power: 5.5 to 7.5 Kw Weight: 7000 to 11000 Kg
Maximum Drilling diameter: 40 to 65 mm Distance of spindle axis column: 320 to 1600 mm Spindle nose & working surface: 90 to 1220 mm Vertical travel of radial arm: 500 to 580 mm Travel of spindle head along arm: 500 to 1250 mm Column diameter: 300 to 350 mm Spindle diameter: 60 to 79 mm Spindle travel: 240 to 315 mm Spindle speed: 75 to 2000 RPM (6 to 16 step) Spindle feed: 0.1 to 3.2 mm/rotation (3 to 16 step) Size of work table: 400x350 to 500x630 mm Motor power: 1.5 to 3 Kw Weight: 1800 to 3500 Kg
We supply drilling spools that are in line with API specification 6A. Drilling spools allow the smooth circulation of mud during drilling operations and usually have the same nominal top and bottom end connections. Side outlet may differ from each other. Top, bottom and side end connections can be hub end or flanged. Specifications: Working Pressure: 2000 psi~20000 psi (14Mpa~140Mpa) Working Medium: crude oil, natural, mud Temperature Ratings: -46~121â??(LU) Material Class: AA~HH Product specification levels: PSL1~PSL4 Performance levels: PR1~PR2
We specializes in drill bits, drill pipe, Mud pump and stabilizers for water well, oil field, construction, geothermal, directional boring, and underground foundation work all over the world. Our purpose is to sell the best quality products at the lowest possible price. We are professional supplier of new and used(rebuilt) drill bits used for oil filed, water well. Including tricone bits,PDC bits and drill pipe. Various of model and dimension available. Good condition and reasonable price. Product Description: Steel teeth Bits 114-117, 127 Soft Formation Tooth Bits The 114-117 bits are used to drill low-compressive strength, soft formation. Long projection tooth lengths are used on high offset cones to provide the greatest penetration rates possible. Wear-resistant hard facing is used to control tooth wear. On the softest bits type this hard facing completely covers the bit teeth. 127 Medium-Hard Formation Tooth Bits The 127 bits are used to drill high-compressive strength, medium hard formations. Short projection teeth with reduced crest length are used in this series of bit designs. Durable hard facing is applied to reduce tooth wear. Medium hard with high compressive strength and hard streak (hard shale ,sandstone , limestone, etc.) 437 Soft Formation TCI Tricone Bits The 437 TCI bits are used to drill low compressive strength, very soft formations. TCI bits maximize the use of both conical and chisel tungsten carbide inserts of large diameters and high projection. This cutting structure design, combined with maximum cone offset, result in high bit penetration rates. The deep intermesh of cutter rows prevents bit bailing in sticky formations. 517 Medium Formation TCI Tricone Bits The 517 features aggressive chisel tungsten carbide insert on the heel rows and inter rows. This design provides a fast drilling rate and added cutting structure durability in medium-to-medium hard for-mationes. The HSN rubber O-ring provides adequate sealing for bearing durability. 637 Hard Formation TCI Tricone Bits The 637 bits can be used to drill hard and abrasive forma-tions. Wear-resistant tungsten carbide inserts are used in the outer rows to prevent loss of bit gauge. Maximum numbers of hemispherical-durability and long life. 617 Medium-Hard Formation TCI Tricone Bits The 617 feature robust chisel tungsten carbide inserts on the heel row and conical on the inner rows. This design provides a fest drilling rate and added cutting structure durability in medium to medium hard formations. The HSN rubber O-rin provides adequate sealing for bearing durability. Plywood case or according to the conform order.
Riprap, also known as rip rap, rip-rap, shot rock, rock armor, or rubble, is man-placed rock or other material used to armor shorelines, streambeds, bridge abutments, pilings and other shoreline structures against scour and water, wave, or ice erosion
Description: Mud Cleaner is the second stage and the third stage solids control equipment which is a combination of Desander, Desilter and underflow shaker shaker. Comparing with traditional separate Desander and Desilter, the mud cleaner has a higher cleaning function. The Underflow Screen equals another shaler shaker which receives the waste out from the cyclone nozzle for additional processing. So that mud cleaner could recover more valuable drilling mud. Mud cleaner is the ideal device of the second class and the third class solid control to treat the drilling mud.
Description: The Mud guns are meant to provide supplemental or primary mixing in mud tanks depending on the number being used and the pit size. They are best used in tank corners to keep solids from settling and a mud agitator is placed in the tank center.
Description: Mud Agitator, less than 5.5 kW drilling mud Agitator adopts the blender cycloid speed reducer, and it is applied to the drug liquids mixing tank. This mud agitator has the advantage of compact structure so it occupies small area.� 1.Compact design. Quiet, smooth, vibration free. 2.Durable, single reduction worm gear drive. 3.Fewer moving parts, less maintenance. 4.Compact design without coupling, IEC top brand gear box. 5.C-Face Explosion proof electrical motor direct connection with gear box. ATEX, IEC Ex, and Marine Model Motor (Kw) Speed (RPM) Impeller Size (mm) Impeller Qty (pcs) Ratio Weight (Kg) Dimension (mm) LKJBQ030D 3 60/72 (50HZ/60HZ) 650 1 25:1 154 717�?560�?471 LKJBQ055D 5.5 850 1 280 892�?700�?597 LKJBQ075D 7.5 950 1 287 980�?750�?608 LKJBQ075DD 800 2 297 LKJBQ110D 11 1050 1 402 1128�?840�?655 LKJBQ110DD 850 2 419 LKJBQ150D 15 1100 1 423 1158 840 655 LKJBQ150DD 950 2 441 LKJBQ185DD 18.5 1050 2 746 1270�?1000�?727 LKJBQ220DD 22 1100 2 820 1270�?1000�?727
SourcEEZ is a multi product Indian sourcing agency which handles END TO END sourcing operations. Right from vendor analysis and selection, to overseeing the course of production, and to finally warranting a smooth sail for your products, we ascertain that you have a stress-free grip on the procurement process as a whole.
The Manual tongs are necessary tools applied to make up and break out pipes. By changing the lug jaws and latch steps the manual tongs can hold different size of tongs.They are designed and manufactured according to API 7K for well drilling equipment. The B type manual tongs are includes B type, SB type, and DB type, SDD,LF, Type C, workover tongs, WWC, WWB,AAX, Casing tong, Extended casing tons.
1.Increased rate of penetration. 2.Better hole deviation control. 3.Reduction in drill string failure rate. 4.Reduction in wear and tear of the swivel, Kelly, and rotary drives. 5.Reduction in fuel cost, since compared to rotary drilling, less energy is required to power a downhole motor. 6.Big torque, high effective, wide flow rate range, running stable and long using time. 7.API Spec. Standard
1.API 7-1 Standard connection 2.Tricone bit is suitable for any rock formation. 3.Tricone bit is versatile and can handle changing formations. 4.PDC Main cutters are high performance PDC cutters to insure service life of the bit while improving ROP. 5.Hydraulic system of the bit is optimized using dynamic flow pattern simulation technology to enhance cleaning and cooling effects of the bit to effectively prevent bit from balling.
1. The drill rods comply with the provisions of API SPEC 5D & API SPEC7. 2. The grade of steel are determined according to the requirements of Group 1 & Group 3 of API SPEC 5D. 3. Drill pipe joints at the same level comply with the provisions under the Standard API SPEC 7. 4. Standard pipe size range: 2-3/8â??~6-5/8â?? 5. Hardbanding: The wear rate is less than 6% of that of bare tool joint, which can prolong 3 times of the tool joint service life. Good property of friction-reduction, which can reduce the casing wear to the least, and its wear to casing is less than 11% of that of bare tool joint. Reduce the torque of drilling string. 6. Widely used for oil, gas, water well and geothermal fields in Turkey, Poland, Japan, Singapore etc.
Kellys are manufactured with one of two drive configurations, square or hexagonal. Square kellys are furnished as forged or machined in the drive section. Hexagonal or fully machined square kellys are machined from full length quenched and tempered round bars. Square Kelly and hexagonal kellys are fabricated as per requirements of customers. The kellys are made of AISI 4142H-4145H forged or rolled alloy structural steel. Quenching plus tempering thermal treatment will be conducted over the whole length. Its Brinell hardness can reach 285-341 on the basis of such thermal treatment. Charpy impact energy: >or =54J. The formulated process can ensure that the misalignment of the hole reaches the standard wall thickness. Kelly bars are manufactured according to API-7-1 Spec.
1. Hardness range of 285 to 341 BHN and a charpy impact value of 40ft/lbs are guaranteed for evenly distributed 16 points in any cross sections at room temperature. 2. Connections as phosphate coated father machining to protect the threads from corrosive elements and to prevent galling upon initial make -up. Thread roots are cold rolled on API and H0-90 connections. 3. Pressed steel thread protectors are supplied to all drill collar that are equipped with standard connections. 4. Manufactured strictly according to API standard. 5. Widely used in oil, gas, HDD and geothermal field.
1.Made of 4145H alloy structural steel. 2.Production complies with the provisions under the Standard SY/T 5146-1997. Connector screws comply with the provisions of the Standard API SPEC 7-1. 3.The tube section has a larger diameter at mid length to protect the heavy weight drill pipe from wear. 4.Hardbanding and Internal Coating can be provided on customer request.
1.The product is used for the reaming of the oil, gas, petrochemical, sewage, power and fiber optic pipelines in the no-dig horizontal directional drilling. 2.Directional crossing operation is widely used in unexcavated project. 3.Small torque force can be applied to hole opening with drilling machine. 4.Hole opener includes body and the cutter. 4 different types of cutter can be assembled to the body in one size for opening the hole in 4 sizes. 5.Cutter can be divided into MT type used in soft formation and TCI type used in hard formation.
1.API standard drilling cross-over sub 2.BOX x BOX, BOX x PIN, PIN x PIN 3.Different API Standard connection type, e.g. NC, REG, FH, IF etc. 4.Apply to HDD, Geothermal, Gas, Oil and Water well drilling.
Model KD600 - Function: drilling - Number of pully: 2 units - Drill route: 50 mm - Distance from spindle nose to the table: 120 mm - Distance from center of spindle nose to column: 104.5 mm - Column diameter: �? 46.5 mm - Bit diameter: �?1.5 - �?13 - Motor: 1/4HP â?? 1 phase â?? 4P (220V/50Hz) Model KD800 - Function: Drilling - Number of pully: 2 units - Drill route: 58 mm - Distance from spindle nose to the table: 255 mm - Distance from center of spindle nose to column: 126.5 mm - Column diameter: �? 58.5 mm - Bit diameter: �?3 - �?13 - Motor: 1/2HP â?? 1 phase â?? 4P (220V/50Hz) Model KDC800 - Function: drilling and tapping - Number of pully: 3 units - Drill route: 58 mm - Distance from spindle nose to the table: 245 mm - Distance from center of spindle nose to column: 126.5 mm - Column diameter: �? 58.5 mm - Bit diameter: �?3 - �?13 - Motor: 1/2HP â?? 1 phase â?? 4P (220V/50Hz)
