The Lake Drilling MOTOR is a powerful and reliable positive displacement motor. The motor generates an optimum balance of rotational speed and high torque to drive a variety of drill bits at speeds that maximize tool life and performance. LAKE MOTORS offers a choice of flow rates, speeds, and torques to match a wide range of operational parameters. LAKE MOTORS are used in applications such as straight hole drilling, directional (steerable) drilling, horizontal drilling, hole opening, and re-entry(work over).
2.Description of downhole motor
1.The down-hole drill motor is a kind of downhole drill tool driven by mud.
2.As mud fluid from the mud pump enters the motor via the bypass valve, a certain pressure difference is formed at the inlet and outlet of the motor, pushing the rotor to rotate. Torque and rotate speed are transferred via the cardan shaft and the driving shaft to the bit.
3. Performance of the down-hole drill motor depends mainly on performance parameters of the screw motor.
4.This product uses the high and new technology of coating to avoid coating off of rotors resulted from the
traditional technology. Its strength and life are greatly improved.
5.It is applicable to directional drilling,horizontal drilling, composite drilling, cluster wells, sidetrack wells and well
workover etc.
3. Advantage of downhole motor
Increased rate of penetration.
Better hole deviation control.
Reduction in drill string failure rate.
Reduction in wear and tear of the swivel, Kelly, and rotary drives.
Reduction in fuel cost, since compared to rotary drilling, less energy is required to power a downhole motor.
Our company manufactures Wireline Drill Rods, BQ, NQ, HQ, PQ, PHD, Parallel Threaded Drill Rods, DCDMA Sizes AW, BW, NW, HW, and Metric sizes 42 mm, 50 mm, 60 mm to 90mm.
Note:
1. Thread oil should be used when screwing the drill rod and hammer knocking should be prohibited.
2. The drill rod stand should have buffer materials, like wood, rubber, and more. The contact between the threaded ends and iron tools should be forbidden.
3. During the relocation of drill rod, the thread protector should be screwed on the threaded parts so as to protect it from damages.
From WLA to WLP, Parallel Threaded Drill Rods, DCDMA sizes AW-HW, and Metric sizes 42mm to 90mm, tapered threaded drill rods, DCDMA sizes AWY to NWY, AWJ, BWJ and S75 drill rods.
Specification:
1. Our drill rods are of the highest quality ,are manufactured to exacting specifications using advancing maching technoogy.
2. They are manufactured from seamless steel tube by cold drawn.The material is XJY850/30CrMnSiA which meets the global standard.
3. Drill rods are made from quality heat treated materials which ensure superior strength, wear resistance and toughness in the most demanding applications.
4. Rods and casing are manufactured under stringent industry standards, and are field tested under a variety of conditions.
5. All rods are designed to be compatible with other rods manufactured to the standard DCDMA.
The mud pump piston assembly is one of the main parts of the hydraulic end system of the mud pump.The discharge pressure of the mud pump is generated by reciprocating linear motion of the piston assembly in the piston.Piston assembly by the piston core, rubber, spring, pressure plate, etc.
Our mud pump pistons are strictly manufactured according to API Standard, which with a high performance in various well drilling environment. The hub is forged from high quality steel, and the piston rubber is made from specially formulated compounds which are of heat, oil and water resistance. It is interchangeable with all other API standard designed pistons. And the valve rubber is easy to install.
DTH Drill Rods (Tubes/Pipes) and Sub Adaptors: Acedrills has DTH drill rods with several different thickness designs for each diameter, made from different grade steels for selection. So, in practice of field drilling, under different condition, there may be in need of different kinds of drill rods for particular application. For example, the thicker ones with general high quality grade steel for drilling hole of average depth, such as blasting holes; and the thinner ones with better grade steel for drilling hole of very deep, such as drilling for ground thermal. Moreover, Acedrills DTH drill rods are also well heat-treated, precision manufactured, and friction-welded.
5763 Drilling Machines Tools Suppliers
Short on time? Let Drilling Machines Tools sellers contact you.
DTH Drill Rods (Tubes/Pipes) and Sub Adaptors: Acedrills has DTH drill rods with several different thickness designs for each diameter, made from different grade steels for selection. So, in practice of field drilling, under different condition, there may be in need of different kinds of drill rods for particular application. For example, the thicker ones with general high quality grade steel for drilling hole of average depth, such as blasting holes; and the thinner ones with better grade steel for drilling hole of very deep, such as drilling for ground thermal. Moreover, Acedrills DTH drill rods are also well heat-treated, precision manufactured, and friction-welded.
product name: 24 inch steel body PDC bit
diameter: 24 inch
blade quantity: 6
nozzle quantity: 9
connection thread: 75/8" AP Reg pin
usage: water, oil, gas well drilling
application formation: hard rock formation
Company profile
Hebei Crossing Drill Bit Manufacture CO.,LTD is a professional supplier of drilling tools,including tricone bit,PDC tricone bit,Hole opener,single cone bit and so on.With years of study and refining of the introduced technology, we have succeeded in the field of product research with proprietary intellectual property rights.Also, we have made major breakthrough in the lines of analogue simulation in bottom-hole flow field,profile optimization,design of inserts arrangement and low torque,material and manufacturing techniques etc. As a result, our products own better characters of service and ranges of application.Mainly used for oil and gas,mining,geothermal,construction and so on.
The products of our company have achieved industrialization and serialization.Besides our company has always laying importance on the technical exchanges and cooperation with the counterparts both at home and abroad.Our products have been sold all over the world, including the United States, England,Canada,Brazil,Russia,Italy,Iran,Saudi Arabia,Korea, India, and Poland and so on.
The main products we can provide:
1.tricone bit(steel tooth and TCI tricone bit)
2.PDC bit(steel body and matrix body PDC bit)
3.rock hole opener for vertical and horizontal directional drilling, rock reamer
4.single tricone cutter
5.other drilling tools(drill rod, mud motor, drag bit, etc)
product name: tungsten carbide insert tricone rock bit
diameter: 135/8 inch
IADC: 537
bearing: rubber sealed bearing
connection thread: 65/8" API Reg pin
usage: water, oil, gas well drilling
application formation: medium soft rock formation
Company profile
Hebei Crossing Drill Bit Manufacture CO.,LTD is a professional supplier of drilling tools,including tricone bit,PDC tricone bit,Hole opener,single cone bit and so on.With years of study and refining of the introduced technology, we have succeeded in the field of product research with proprietary intellectual property rights.Also, we have made major breakthrough in the lines of analogue simulation in bottom-hole flow field,profile optimization,design of inserts arrangement and low torque,material and manufacturing techniques etc. As a result, our products own better characters of service and ranges of application.Mainly used for oil and gas,mining,geothermal,construction and so on.
The products of our company have achieved industrialization and serialization.Besides our company has always laying importance on the technical exchanges and cooperation with the counterparts both at home and abroad.Our products have been sold all over the world, including the United States, England,Canada,Brazil,Russia,Italy,Iran,Saudi Arabia,Korea, India, and Poland and so on.
The main products we can provide:
1.tricone bit(steel tooth and TCI tricone bit)
2.PDC bit(steel body and matrix body PDC bit)
3.rock hole opener for vertical and horizontal directional drilling, rock reamer
4.single tricone cutter
5.other drilling tools(drill rod, mud motor, drag bit, etc)
product name: milled tooth tricone bit
diameter: 15 inch
IADC: 114
bearing: rubber sealed bearing
usage: water well drilling
application formation: soft formation
Company profile
Hebei Crossing Drill Bit Manufacture CO.,LTD is a professional supplier of drilling tools,including tricone bit,PDC tricone bit,Hole opener,single cone bit and so on.With years of study and refining of the introduced technology, we have succeeded in the field of product research with proprietary intellectual property rights.Also, we have made major breakthrough in the lines of analogue simulation in bottom-hole flow field,profile optimization,design of inserts arrangement and low torque,material and manufacturing techniques etc. As a result, our products own better characters of service and ranges of application.Mainly used for oil and gas,mining,geothermal,construction and so on.
The products of our company have achieved industrialization and serialization.Besides our company has always laying importance on the technical exchanges and cooperation with the counterparts both at home and abroad.Our products have been sold all over the world, including the United States, England,Canada,Brazil,Russia,Italy,Iran,Saudi Arabia,Korea, India, and Poland and so on.
The main products we can provide:
1.tricone bit(steel tooth and TCI tricone bit)
2.PDC bit(steel body and matrix body PDC bit)
3.rock hole opener for vertical and horizontal directional drilling, rock reamer
4.single tricone cutter
5.other drilling tools(drill rod, mud motor, drag bit, etc)
Follow the API Q1 quality inspection standard. Base on the API 5CT Annex I when design the product.
Applications
Products are the required parts for oil drill pipes and drill color that can protect the thread of each side of pipe.Mainly Thread protectors can prevent your connector threads and pipe end fromdamaging during handling, transportation and storage.
A mud cleaner is a combination of desanders and/or desilters mounted over a shaker with a fine mesh screen. A mud is fed to the inlet of the hydrocyclone (desander and/or desilter) to separate particles and the underflow passes to the fine screen mesh where in particles larger than barite are discarded and thrown away. In most drilling operations, a mud cleaner is installed in its mud systems. It is usually located in a mud tank in the same location as with the desilters.
1.The Quick-operating Thread Protector is a manually-operated device for protecting external pin-end threads on casing. It is simple, tough and secure, The fast and easy operation of Quick-operating Thread Protectors saves casing screw time, saves rig time and saves your money.
2.The Quick-operating Thread Protector consists of a high strength spring-steel band molted inside strong, abrasion-resistant rubber. An adjustable cam-type latch assembly is incorporated for manual locking and unlocking of the protector. To operate the Quick-operating Thread Protector, place the protector on the pin-end threads of pipe, push the handle firmly toward the center of the pipe and the locking action securely closes it in place. Pull the handle out to release.
The Shear Relief Valve consists of stem, body, box, cut pin and shroud. The mud pressure acts on the lower end of the valve body, and the valve body is subjected to an upward thrust, which is cut by the stem to cut the cut. When the thrust is such that the shearing stress received by the shearing pin is greater than the shear strength limit of the shearing material, the shearing pin is cut. When the diameter of the piston is determined, different mud pressures can be controlled by the different diameters of the shearing pins. Therefore, in the construction, as long as the construction technology requirements, to determine the mud pressure, the different diameter of the shear pin can be inserted into the corresponding hole.
Main Parameters
1. Easy to open and close
2.Piston Presure bearing area is small
3.Simple to adjust
4.Suit for multifold mud pumps
5.Type: flange and thread
6. useage: Mud pump accessories
7. interchangeable with all brand (F series, 3NB series etc)
Casing and tubing coupling bucking unit is widely applicable for casing and tubing manufacturing, and oil field service. Among which the TJA series is the most representive casing and tubing making equipment with most mature technology and most advanced structure. The bucking unit follows API tubing thread connection requirements, especially suitable for screwin screwout of multiple kinds of coupling. Never-stick gripping mechanism and precise torque-control system provide whole computer moninor during screwing process. Manual, semi-automatic, fully automatic are available, and features large range, high torque, long service life and safe and reliable. The product has awarded national invention patent.
Made of AISI4145H alloy steel, drill collar mainly used between the dill pipe and drill head and connected by conversion connector so that they can provide the pressure and weighting to dill head ,in order to make the dill head to keep right trace .
If order of inquiry please offer: Non magnetic drill collar
·outer diameter of dill collar
·handling features
·length of drill collar
·stress relief features
·drill collar bore
·connection type
Drill Pipe Screens are an important part of the directional drilling tool string. They filter out large particles in the mud protecting the MWD tools below. The Drill Pipe Screens are made of 3/16 thick perforated stainless steel, with 17-4 hub and end cap heat treated to H900. This combination of materials has been field proven to outlast the competition in high wash environments. Our screens are available in every configuration to fit your specific requirements.
Specification of Drilling Pipe Screen:
a. Material: 304 & 316 stainless
b. Perforation: 3/16 hole on 5/16 stagger
c. Retrievable with standard overshot
d. Interchangeable ring flanges
e. 33% open area perforation
f. Internal wear distribution sleeve
g. Full length safety retaining rod
Product Description
API 16A BOP Annular BOP Packing element Spherical or Tapered Features:
1)Standard: API
2)Pressure: 2000~15000psi
3)Size: 7-1/16" to 21-1/4"
4)Annuar/Tapered type Available
5)Quick delivery.
6)Can interchange with shaffer hydril SK Rongsheng's packing element
Description of Integral drill rods
Integral drill rods(integral rods or integral drill steels) are used for small hole drilling. Equipped with small power rock drills, like air leg rock drills, hand held rock drills, etc. integral drill steels can be used for drilling bore hole diameter from 29mm to 41mm usually. Integral drill rods are usually hexagonal with chisel tips or cross tips, the diameter are usually 19mm and 22mm. According to different application, different lengths are available from 600mm to 9600mm usually. With the best hollow drill steels and tungsten carbides, sinodrills integral drill steels will show you very good performance.
More Product Feature
1, light weight (lighter than the old-fashioned drill pipe 45%)
2, footage soon, dust small vertical holes left after drilling cuttings, into a hole clear.
3, card beans quickly and easily connect and save banding material.
4, under separation of body and drilling may be the end, the use of life extended.
5, water-based wet good pass operation
1. Module is made from 4135 alloy steel with strict forging and heat treatment process, or Ceramic (Zirconia and Aluminium Oxide).
2. Mud pump fluid end parts offer full lines of Cylinder Head, Valve Lock Cover, Valve Assy, Cylinder Head Threaded Ring, Cylinder head Plug, Valve Cover Plug, Upper Valve Guide, Lower Valve Guide, Liner Threaded Ring, Liner Lock, Wear Plate and much more.
3. Three types of Liner: High chrome sleeve, single shell, zirconia ceremic liner.
4. Pony rod and piston rod is made of premium quality, heat treated alloy steel.
5. Valve and seat assembly are made of forged alloy steel with deep carburized wear surface. We offer a full range of valves and seats which include full open valve and seat, 3 web / 4 web design valve and seat .
5763 Drilling Machines Tools Suppliers
Short on time? Let Drilling Machines Tools sellers contact you.
