Lakeâ??s mono-metal liner has its inner bore quenched with the carburized layer thickness as 1.5 to 1.8mm to achieve hardness of 58 to 60 HRC. The liner features high hardness, great corrosion resistance, no deformation and high surface finish. It can be applied on Gardner Denver duplex pumps such as FY-FXD7-1/2X10 series, FC-FXX5X8 series, FD-FXX5X10 series and FG-FXG5X6 series, etc.
Bi-Metal Liner
The outer sleeve of Rundongâ??s bi-metal liner is made of forged carbon steel and features great wear resistance, while the inner sleeve is made of high-chromium alloy cast iron and features great resistance to wear and corrosion. Through thermal treatment, the inner sleeve reaches hardness of 61 to 64 HRC. In general, the service life of our bi-metal liner is 800 hours. The liner has won a great reputation among many oil fields.
Ceramic Liner
Our ceramic liner is made of toughening zirconium oxide with fracture toughness (K) ranging from 10 to 15 Mpa, which is about 10 times of that of traditional ceramics. In addition, the linerâ??s flexural strength(�?) is ranging from 600 to 800 Mpa, the Weibull modulus is 18m and the elasticity modulus (E) is 200Gpa. The ceramic liner features excellent resistance to wear and corrosion. Its average service life is longer than 3,000 hours, which significantly reduces the cost of well drilling.
Lakeâ??s mono-metal liner has its inner bore quenched with the carburized layer thickness as 1.5 to 1.8mm to achieve hardness of 58 to 60 HRC. The liner features high hardness, great corrosion resistance, no deformation and high surface finish. It can be applied on Gardner Denver duplex pumps such as FY-FXD7-1/2X10 series, FC-FXX5X8 series, FD-FXX5X10 series and FG-FXG5X6 series, etc.
Bi-Metal Liner
The outer sleeve of Rundongâ??s bi-metal liner is made of forged carbon steel and features great wear resistance, while the inner sleeve is made of high-chromium alloy cast iron and features great resistance to wear and corrosion. Through thermal treatment, the inner sleeve reaches hardness of 61 to 64 HRC. In general, the service life of our bi-metal liner is 800 hours. The liner has won a great reputation among many oil fields.
Our ceramic liner is made of toughening zirconium oxide with fracture toughness (K) ranging from 10 to 15 Mpa, which is about 10 times of that of traditional ceramics. In addition, the linerâ??s flexural strength(�?) is ranging from 600 to 800 Mpa, the Weibull modulus is 18m and the elasticity modulus (E) is 200Gpa. The ceramic liner features excellent resistance to wear and corrosion. Its average service life is longer than 3,000 hours, which significantly reduces the cost of well drilling.
Lakeâ??s mono-metal liner has its inner bore quenched with the carburized layer thickness as 1.5 to 1.8mm to achieve hardness of 58 to 60 HRC. The liner features high hardness, great corrosion resistance, no deformation and high surface finish. It can be applied on Gardner Denver duplex pumps such as FY-FXD7-1/2X10 series, FC-FXX5X8 series, FD-FXX5X10 series and FG-FXG5X6 series, etc.
Bi-Metal Liner
The outer sleeve of Rundongâ??s bi-metal liner is made of forged carbon steel and features great wear resistance, while the inner sleeve is made of high-chromium alloy cast iron and features great resistance to wear and corrosion. Through thermal treatment, the inner sleeve reaches hardness of 61 to 64 HRC. In general, the service life of our bi-metal liner is 800 hours. The liner has won a great reputation among many oil fields.
Ceramic Liner
Our ceramic liner is made of toughening zirconium oxide with fracture toughness (K) ranging from 10 to 15 Mpa, which is about 10 times of that of traditional ceramics. In addition, the linerâ??s flexural strength(�?) is ranging from 600 to 800 Mpa, the Weibull modulus is 18m and the elasticity modulus (E) is 200Gpa. The ceramic liner features excellent resistance to wear and corrosion. Its average service life is longer than 3,000 hours, which significantly reduces the cost of well drilling.
2. Skid- mounted & Pump Unit for each kinds of pump said above.
4. Spare Parts and Expendable parts: With the specialized & batched production liner, we can supply power end assembly, fluid end assembly and its spare parts, which can be easily matched & exchanged with some international famous mud pump brand.
1. Applicable to connection at locations when drill platform, semi-submersible drilling vessel or drill vessel moves relatively and the installation dimensions of the drill rig subsequently change, and to delivery of oil, gas, mud and other high pressure media(including mainly relief line, blowout control line and choke kill line.)
2. Applicable standard: API Spec 16C.
3. The product features resitance to high preesure, thermal insulation, anti-flaming and fire resistance as well as inner wall with high abrasion resistance.
Spacer spool, in accordane with API 6A, have end connectors of the same size, rated working pressure and design. Spacer spool is wellhead sections which have no prevision for suspension of tubular members and which may have no prevision for sealing of tubular members.
We manufacture the sapcer spool in all size and pressure ratings suitable for Well Head extension, BOP spacing, and Choke, Kill, and production Manifold applications.
We can produce all kinds of API 6A double studded adapter for wellhead use. It is important for wellhead use. It is important device to connect the different flange for wellhead, so the material of the body and studs and nuts shall be conforms the related requirements. The size is in accordance with API flange certification.
We manufacture drill rods are crafted from quality heat treated materials ensuring superior wear resistance, strength, and toughness in the most demanding applications.
Drill rods are available in DCDMA sizes AW, BW, NW and HW with tapered threaded tool joints in sizes AWY, BWY and NWY.
Drill rods are also available in Wireline sizes A, B,N, H, P and Metric sizes 42mm, 50mm, 60mm, 7Omm and 90mm.
We also manufacture Friction welded Drill Rods for other applications such as DTH Hammer rilling. Casing tubes are available in DCDMA sizes BW, NW, HW, PW and SW and Metric Sizes 46 -146 mm.
Specifications:
1.Whole heat treatment
2.Screw thread heat treatment.
3.Hard chromed on pin end
geological steel pipe-entire length thermal treatment, NC lathe with former cutters
Material:30CrMnSiA or 45MnMoB(A grade), XJY850 or BG850( B grade)
We manufacture drill rods are crafted from quality heat treated materials ensuring superior wear resistance, strength, and toughness in the most demanding applications.
Drill rods are available in DCDMA sizes AW, BW, NW and HW with tapered threaded tool joints in sizes AWY, BWY and NWY.
Drill rods are also available in Wireline sizes A, B,N, H, P and Metric sizes 42mm, 50mm, 60mm, 7Omm and 90mm.
We also manufacture Friction welded Drill Rods for other applications such as DTH Hammer rilling. Casing tubes are available in DCDMA sizes BW, NW, HW, PW and SW and Metric Sizes 46 -146 mm.
Specifications:
1.Whole heat treatment
2.Screw thread heat treatment.
3.Hard chromed on pin end
geological steel pipe-entire length thermal treatment, NC lathe with former cutters
Material:30CrMnSiA or 45MnMoB(A grade), XJY850 or BG850( B grade)
The impregnated diamond drill bits are the most commonly useful bits in the mineral exploration industry, as they have the widest range of application. The high grades of synthetic diamond are distributed in the bit's matrix.
Casing Shoe:
The casing shoe bit is mainly used in handling casing tube in the shallow earth surfaces, and we have casing shoes bit in different hardness to better fit various casing tube bits.
The casing shoe diamond bit is mainly made up of diamond single crystal steel body, tungsten carbide and polycrystalline diamond.
Main functions of casing shoe:
1): Protect casing ends from distortion.
2): Help casing pass through stratum to bed rock.
3): Carry mud to earth surface.
4): Help down-pass of casing when drill rod is in hole.
We manufacture drill rods are crafted from quality heat treated materials ensuring superior wear resistance, strength, and toughness in the most demanding applications.
Drill rods are available in DCDMA sizes AW, BW, NW and HW with tapered threaded tool joints in sizes AWY, BWY and NWY.
Drill rods are also available in Wireline sizes A, B,N, H, P and Metric sizes 42mm, 50mm, 60mm, 7Omm and 90mm.
We also manufacture Friction welded Drill Rods for other applications such as DTH Hammer rilling. Casing tubes are available in DCDMA sizes BW, NW, HW, PW and SW and Metric Sizes 46 -146 mm.
Specifications:
1.Whole heat treatment
2.Screw thread heat treatment.
3.Hard chromed on pin end
geological steel pipe-entire length thermal treatment, NC lathe with former cutters
Material:30CrMnSiA or 45MnMoB(A grade), XJY850 or BG850( B grade)
The impregnated diamond drill bits are the most commonly useful bits in the mineral exploration industry, as they have the widest range of application. The high grades of synthetic diamond are distributed in the bit's matrix.
Casing Shoe:
The casing shoe bit is mainly used in handling casing tube in the shallow earth surfaces, and we have casing shoes bit in different hardness to better fit various casing tube bits.
The casing shoe diamond bit is mainly made up of diamond single crystal steel body, tungsten carbide and polycrystalline diamond.
Main functions of casing shoe:
1): Protect casing ends from distortion.
2): Help casing pass through stratum to bed rock.
3): Carry mud to earth surface.
4): Help down-pass of casing when drill rod is in hole.
We manufacture drill rods are crafted from quality heat treated materials ensuring superior wear resistance, strength, and toughness in the most demanding applications.
Drill rods are available in DCDMA sizes AW, BW, NW and HW with tapered threaded tool joints in sizes AWY, BWY and NWY.
Drill rods are also available in Wireline sizes A, B,N, H, P and Metric sizes 42mm, 50mm, 60mm, 7Omm and 90mm.
We also manufacture Friction welded Drill Rods for other applications such as DTH Hammer rilling. Casing tubes are available in DCDMA sizes BW, NW, HW, PW and SW and Metric Sizes 46 -146 mm.
Specifications:
1.Whole heat treatment
2.Screw thread heat treatment.
3.Hard chromed on pin end
geological steel pipe-entire length thermal treatment, NC lathe with former cutters
Material:30CrMnSiA or 45MnMoB(A grade), XJY850 or BG850( B grade)
The impregnated diamond drill bits are the most commonly useful bits in the mineral exploration industry, as they have the widest range of application. The high grades of synthetic diamond are distributed in the bit's matrix.
Casing Shoe:
The casing shoe bit is mainly used in handling casing tube in the shallow earth surfaces, and we have casing shoes bit in different hardness to better fit various casing tube bits.
The casing shoe diamond bit is mainly made up of diamond single crystal steel body, tungsten carbide and polycrystalline diamond.
Main functions of casing shoe:
1): Protect casing ends from distortion.
2): Help casing pass through stratum to bed rock.
3): Carry mud to earth surface.
4): Help down-pass of casing when drill rod is in hole.
1,The tong head is the open structure position, and the integral tong head has good hardness and rigidity;
2,The three-jaw-plate clamping device is adopted in the master tong and back tongs. The front two jaw plates of the master tong are in the swing structure and the back jaw plate is the roller-climbing structure.
3,Four-gear rotation is adopted for large speed regulation range.
4,It has the braking mode with braking staple. The braking torque is large. The operation is simple. And it is convenient for repair and replacement;
5,With the open large gear supporting structure, hardness and rigidity of open large gear is enhanced considerably;
6,The shell is made of steel plate with high hardness.
7,Hydraulic torque indicator is provided. And installation interface of turning torque instrument is provided for computerized management.
API Drilling Chinese Downhole Drilling Mud Motor is a kind of downhole drilling tool powered by mud. The mud from mud pump enters motor by way of bypass valve, and a pressure drop between motor inlet and outlet created, such pressure drop will drive the motor rotator to rotate, and transmit the torque and rotary speed to bit by universal shaft and transmission shaft. The downhole motor property mainly depends upon its property parameters. This product uses the high and new technology of coating to avoid coating off of rotors resulted from the traditional technology. Its strength and life are greatly improved. It is applicable to directional drilling horizontal drilling, composite drilling, cluster wells, sidetrack wells and well workover etc
5828 Drilling Machines Tools Suppliers
Short on time? Let Drilling Machines Tools sellers contact you.
