Pneumatic rock drill manufacturer and exporter from India
Features: 1.The product is used for the reaming of the oil, gas, petrochemical, sewage, power and fiber optic pipelines in the no-dig horizontal directional drilling. 2.Directional crossing operation is widely used in unexcavated project. 3.Small torque force can be applied to hole opening with drilling machine. 4.Hole opener includes body and the cutter. 4 different types of cutter can be assembled to the body in one size for opening the hole in 4 sizes. 5.Cutter can be divided into MT type used in soft formation and TCI type used in hard formation.
Features: 1.API 7-1 Standard connection 2.Tricone bit is suitable for any rock formation. 3.Tricone bit is versatile and can handle changing formations. 4.PDC Main cutters are high performance PDC cutters to insure service life of the bit while improving ROP. 5.Hydraulic system of the bit is optimized using dynamic flow pattern simulation technology to enhance cleaning and cooling effects of the bit to effectively prevent bit from balling.
Features: 1.Increased rate of penetration. 2.Better hole deviation control. 3.Reduction in drill string failure rate. 4.Reduction in wear and tear of the swivel, Kelly, and rotary drives. 5.Reduction in fuel cost, since compared to rotary drilling, less energy is required to power a downhole motor. 6.Big torque, high effective, wide flow rate range, running stable and long using time. 7.API Spec. Standard
Features: 1. Lake Petro offers both hinged and slip-on style of stop collars in all sizes. 2. The force of hinged stop collar can hold up to 15,000 lb. 3. The force of slip-on set-screw stop collar can hold up to 20,000 lb. 4. We can supply stop collar in all sizes. Specifications: Type: slip-on, hinged spiral nail, hinged bolted, hinged set screw Casing size O.D.: 4-1/2 ~ 20 in (114~ 508 mm) Stop collar size O.D.: 131 ~ 540 mm Stop collar height: 50 ~ 210 mm
BZ solids control is a solution provider of drilling waste management. Drilling waste management system is also called zero-discharge system. Key equipment includes high-G shaker, cutting dryer, decanter centrifuge, screw pump and srew conveyor. They can be used to treat WBM, OBM and SBM. Drilling cuttings after treatment are transfered for other use, recycled drilling fluid is pumping back to solids control system. BZ drilling waste management system has both environmental value and economic value.
Ready stock of OCTG pipes (Casing and Tubing) for oilfield wells as per the attached file with details as follows: Manufacturer name: Tenaris (Number one manufacturer in the world) Materials: All are premium connection brand new never used. Stock: The materials are ready ex-stock in Oman. Size, Qty, Specification: As per the attached excel file. Materials are brand new never used. Those pipes called Casing & Tubing mainly used for the Oil & Gas wells. it is a fast-moving commodity and can be sold to any oil & gas companies as well as all the contractors and exploration companies. All Materials are made by TENARIS company the biggest manufacturer in the world. Enclosed, please find the materials pictures and copy of the materials test certificate.
Pneumatic airleg for pneumatic rockdrill to be used for drilling horizontally in mines.
Pneumatic rock drill for drilling holes in hard and soft rocks.
Tricone Bits are designed for multiple drilling applications, such as Gas and Oil production, Mining and Mineral Exploration, Water Well production, and various other industrial uses. Tricone bits we supplied are made from high quality materials (steel forging, carbide, and others) as per API spec 7 or ISO9001 system, including S series elastomer sealed journal bearing bit, S series non-sealed journal bearing bit, SV series six-point position stabilization motor bit, SL series pilot hole-reaming core bit, SD series single cone bit, etc. Please provide IADC code when asking for quotation.
PRO DRILLING RODS ARC WELDED/ FRICTION WELDED Size : 3" OD (76.2mm)-8" OD (203.2mm) Length : 1.5 Meter(5FT) -6 meter ( 20ft) PRO BUTTON BITS Size : 3 22 OD : 76.0mm 560.0mm Shank Length : 165.0mm 530.0mm No. of Splines : 6 ? 12 Nos
DEWALT 20V MAX Cordless Drill Combo Kit, 10-Tool (DCK1020D2) We sell different brands of original products and they are all brand new and comes with 1-3 year international warranty and return policy. To Place Your Order WHAT-SAPP +1 (210) 668 - 2883 EMAIL: b2bonlinetradingstoreltd95( AT) aol( DOT) com Brand New, Original Authentic, Genuine Product; Never Used, Not Refurbished Sealed in its original Package We have different Model in stock at bulk rate. Come's with complete accessories (Original packaging box) Absolutely new (original manufacturer) We accept Ria Money Transfer, Money Gram , BTC Secure Payment. Bulk order available 100% Guaranteed Fast shipping 100% Guaranteed After-Sales support 100% Guaranteed Genuine/Authentic Product 100% Guaranteed Factory warranty (International) Bitcoin & MG Accepted TRADE ASSURANCE NOT ACCEPTED
Machine Capacity 38/300 Drilling Cap. 38 Face Mill 60mm End Mill 20mm Drilling Head Taper Spindle M.T. 4 Spindle Travel 240 Speeds No. Range of Spindle 8 Spindle Speed Min./Max. 70 to 2000 Feeds No. Range of Feed Manual Working Range Distance from Spindle Centre to Column Face 300 mm Max. Distance From Spindle to Work Table 500 mm Baste Plate & Column Column Diameter 108 Base Plate Diameter of Table 225*835 Base Area 520*755 No. of Slot 3 Power Drilling Motor 1.5 HP 1400 RPM Weight (kgs.) Approximate 475 kg. V-Belt No. B-58
Machine Capacity Drilling Cap. 8 mm Speeds No. Range of Spindle Speed 1000 to 2000 Feeds No. Range of Feed Manual Power Drilling Motor 0.5 HP 1440 RPM Weight (kgs.) Approximate 475 kg.
DRILLING (M.S) 50 DRILLING (C.I) 60 BORING 80 TAPPING (M.S) 25 TAPPING (C.I) 30 DRILLING HEAD SPINDLE NOSE MT-5 SPINDLE NOS OUTSIDE DIA-METER 80 SPINDLE SLIVE DIA-METER 85 TRAVEL OF SPINDLE 240 NO SPINDLE SPEED â?? MIN/MAX 10 30-1500 NO POWER FEED 6 RANGE OF POWER FEEDS 0.08-0.6 POWER DRILLING HEAD 5 - HP MOTOR 1440 â?? 2800 RPM ELEVATING MOTOR FOR ARM 2-HP 1440 â?? RPM HYDRAULIC CLAMPING MOTOR -------- WORKING RANGE COLUMN DIAMETER 300 DIST. FROM SPINDLE TO BASE MIN/MAX 300x1200 DIST FROM COLUMN TO CENTER MIN/MAX 450x1250 DRILLING HEAD TRAVELS 680 DRILLING RADIUS 400x1400 TRAVELS OF ARM 900 BASE PLATE HEIGHT OF BASE PLATE 200 WORKING SURFACE 700x1100 NUMBER OF T-SLOT 3 WIDTH OF CAST SIDE 20 MM OVER ALL DIMENSION (L*W*H) 1790x1000x2300 WEIGHT APPROXIMATE 3000 KG.
Machine Capacity 40/50mm 38 HD 38mm LD 25mm MD 25mm MD 25mm LD 20/200 DRILLING (C.I.) 45 38 38 38 25 25 20 DRILLING (M.S.) 40 38 38 35 25 25 20 TAPPING CAP 25 20 15 20 15 15 10 DRILLING HEAD TAPPER SPINDLE MT-4 MT-4 MT-4 MT-3 MT-3 MT-3 MT-2 Quil Movement 240 240 230 240 175 155 120 SPEEDS No. Range of Spindle 8 8 8 8 8 8 8 Spindle Speed Min. /Max. 45 to 1000 70 to 2000 70 to 2000 70 to 2000 130 to 2600 130 to 2600 80 to 3500 FEEDS No. Range of Feed Manual Manual Manual Manual Manual Manual Manual WORKING RANGE Dist. From Spindle Center to Column Face 350 300 280 250 250 230 200 Max. Dist. From Spindle to Base Plte 1030 1000 940 940 970 1050 900 Max. Dist. From Spindle to Work table 550 530 530 530 530 680 650 WORKING TABLE Table Diameter 485*485 422*422 380*380 370 Round 325*325 310*310 250*250 Baste Plate & Column Column Diameter 135 108 101 92 92 92 74 Base Plate 800*525 680*430 630*405 630*405 580*365 370*550 480*310 No. of â??tâ?? Slots 2 2 2 2 2 2 2 POWER Drilling Motor 2HP 960 RPM 1.5 HP 1400 RPM 1 HP 1400RPM 1 HP 1400RPM 1 HP 1400RPM 1 HP 1440RPM 0.5 HP 1400RPM WEIGHT( Kgs.) Approximate 550 kg 375 kg. 300 kg. 275 kg. 225 KG. 185 KG. 110 KG V-BELT No. B-71 B-59 B-56 B-52 B-52 B-49 A-44
CAPACITY 20 DRILLING (M.S.) 20 DRILLING (C.I.) 20 TAPPING CAP. 10 DRILLING HEAD TAPPING SPINDLE M.T - 2 QUIL MOVEMENT 120 SPEEDS NO.RANGE OF SPINDLE 8 SPINDLE SPEED MIN / MAX 80 TO 3500 FEEDS NO.RANGE OF FEED MANUAL WORKING RANGE DIST.FROM SPINDLE CENTRE TO COLUMN FACE 200 MAX. DIST. FROM SPINDLE TO BASE PLATE 900 MAX. DIST. FROM SPINDLE TO WORK TABLE 650 WORKING TABLE TABLE DIAMETER 250 X 250 BASE PLATE & COLUMN COLUMN DIAMETER 74 BASE PLATE 480 X 310 NO. OF â??Tâ?? SLOTS 2 POWER DRILLING MOTOR 0.5 KG , 1400 RPM WEIGHT (KGS) APPROXIMATE 110 KG. V BELT NO. A - 44
Maximum Drilling diameter: 125 to 150 mm Distance of spindle axis column: 570 to 4000 mm Spindle nose & working surface: 750 to 2500 mm Vertical travel of radial arm: 1250 mm Travel of spindle head along arm: 2580 to 3400 mm Column diameter: 700 to 800 mm Spindle diameter: 112 to 142 mm Spindle travel: 500 to 560 mm Spindle speed: 8 to 1000 RPM (22 step) Spindle feed: 0.06 to 3.2 mm/rotation (16 step) Size of work table: 800x1250 Motor power: 15 to 18.5 Kw Weight: 20000 to 28500 Kg
Maximum Drilling diameter: 75 to 100 mm Distance of spindle axis column: 450 to 2500 mm Spindle nose & working surface: 400 to 2000 mm Vertical travel of radial arm: 800 to 1000 mm Travel of spindle head along arm: 1550 to 2000 mm Column diameter: 450 to 550 mm Spindle diameter: 85 to 104 mm Spindle travel: 400 to 450 mm Spindle speed: 20 to 1250 RPM (16 step) Spindle feed: 0.04 to 3.2 mm/rotation (16 step) Size of work table: 630x800 to 800x1000 mm Motor power: 5.5 to 7.5 Kw Weight: 7000 to 11000 Kg
Maximum Drilling diameter: 40 to 65 mm Distance of spindle axis column: 320 to 1600 mm Spindle nose & working surface: 90 to 1220 mm Vertical travel of radial arm: 500 to 580 mm Travel of spindle head along arm: 500 to 1250 mm Column diameter: 300 to 350 mm Spindle diameter: 60 to 79 mm Spindle travel: 240 to 315 mm Spindle speed: 75 to 2000 RPM (6 to 16 step) Spindle feed: 0.1 to 3.2 mm/rotation (3 to 16 step) Size of work table: 400x350 to 500x630 mm Motor power: 1.5 to 3 Kw Weight: 1800 to 3500 Kg
