Top & bottom drilling spindles of GHD-H-130AL works automatically
Just one button, bottom spindle starts then top spindle after
Laser device helps glass holes registration
Drilled glass core automatically ejected & pushed to a collector bin
Drill hole centre to "C" stands up to 1000 mm
Proper speed with adequate control ensures drill holes free of burr
Core drill center water cooling
Top & bottom drilling spindles of GHD-H-130AL works automatically
Just one button, bottom spindle starts then top spindle after
Laser device helps glass holes registration
Drilled glass core automatically ejected & pushed to a collector bin
Drill hole centre to "C" stands up to 1000 mm
Proper speed with adequate control ensures drill holes free of burr
Core drill center water cooling
Model:DT405
Voltage:220v
Working frequency:15kHz-20kHz
Power:1800W
Carving size: 12CM/ 18CM
Function:the ultrasonic gem machine operate easily for drilling. Featured as high drilling speed and low fault rate. Apply auto track frequency protection, the overload protection minimize the machine fault rate. The drilling head is changeable for gem carving. The drilling force is auto adjusted according to load condition.The available type as:1200W,1800W,4800W,etc.
The 1800w ultrasonic drilling machine with stable performance, its punching speed operation is simple with low failure rate, is a professional gem punching equipment with good processing effect.
Sollant has advanced production technology and an excellent design team. The water well drilling rig and equipment are designed to be durable, and highly efficient, which are widely used in most difficult environments. The Mainly ranges of Sollant: Crawler type pneumatic water well drilling rig, multifunctional hydraulic water well drilling rig, vehicle-mounted water well drilling rigâ?¦
The maximum drilling depth can reach 800m. The drilling rig adopts new hydraulic technology, it has fast rotation speed and extremely high drilling efficiency. And can adapt to various harsh rock and soil environments. The reasonable overall layout, using crawler chassis, strong off-road performance, can also be installed on a tractor for transportation.
Our manufacturing plant is located in Shandong, also has a strategic office in Shanghai, China. We have expanded our offices abroad to support our partners in the Philippines, Mexico, and Russia. This year we will expand to ten countries and by 2023 - 2024 our goal is to expand over thirty countries around the world.
In addition, I'd like to let you know, we are the manufacturer of different categories of Air compressors, Centrifugal compressors, Generators, Well Drilling Rigs, and Forklift trucks. We also provide customized manufacturing facilities as per customer requirements.
Main parameters: voltage:380v/220v power:4kw/3kw Rotation speed:1450r/min Max. load cutting disc size:24inch(600mm) Dimension:1200*680*1080mm Weight:95kg Function:after improved,route rail being added to simplify the forward and backward process when cutting the gem materials.The fixed point cutting is supported, and also allow forward and back move for better cutting speed and cutting route distance. The stone fixed plate is added for more stable and safe production. It is suitable for cutting the stones within 50cm.
Main Parameter: Model:DT405 Voltage:220v Working frequency:15kHz-20kHz Power:1800W Carving size:12CM/18CM Function:the ultrasonic gem machine operate easily for drilling. Featured as high drilling speed and low fault rate. Apply auto track frequency protection, the overload protection minimize the machine fault rate. The drilling head is changeable for gem carving. The drilling force is auto adjusted according to load condition.The available type as:1200W,1800W,4800W,etc. The 1800w ultrasonic drilling machine with stable performance, its punching speed operation is simple with low failure rate, is a professional gem punching equipment with good processing effect.
Tungsten carbide gripper jaws are tools used to clamp and hang the casing string during the drilling process. They are used to clamp or place between the casing of the drill pipe. They are used to tighten and hang the casing string and oil string in the well to prevent them from falling into the well.
Note: Other specification can be made upon customer's requirements.
i) Top performance when drilling and chiselling thanks to 1500 watt motor and 12.5 joules of single impact energy
ii) Low vibration of only 7 m/s² when chiselling and 8 m/s² when drilling due to intelligent triple vibration damping system
iii) Turbo Power function for extra performance in chiselling mode due to additional use of the energy used for rotation in drilling mode
1.The brief introductions of KQZ-200D pneumatic water well drilling rig
KQZ-200D pneumatic water well drilling rig is suitable for drilling and geothermal drilling. It has many advantages, such as large diameter, deep drilling, fast footage, flexible movement and wide application area.
2.The specifications of KQZ-200D pneumatic water well drilling rig
KQZ-200D pneumatic water well drilling rig
Borehole diameter mm 100-254
Borehole depth m 200
Drilling angle ° 45-90
One-time feed stroke mm 1500
Motor power kw 11
Diesel engine power hp 8.5
Rotating speed of drilling tools rpm 52
Air pressure mpa 1.45-2.5
Air consumption l/min 15-27
Total weight kg 650
One Salvage cup usually pick up on the drill bit or milling tool, with its collection of cups will circulate in borehole couldn't recovered heavier small falling objects.It can also be used for casing scraper above, make the casing scraper operation is fast and clean.
TwoSalvage cup salvage fragments falling object is mainly used in drilling process, such as cemented carbide teeth, bit bearing, etc.It is to keep the bottom clean, improve the service life of drill bit, drill bit to reduce and prevent accidental damage plays an important role.
Structure
Salvage cup is mainly composed of spindle, wiper block, outer tube, the joint and so on, as shown.Because the manufacturer is different, although its structure is similar, but not exactly the same, can be selected according to downhole conditions.
Product introduction: use, function, etc
The following configuration is a product diagram + table configuration product specific parameters
NAME
PARAMETER
Engine Model
6BTA5.9-C150
Commins6BTA5.9-C150
Engine cylinder number
6
Engine displacement
5.9L
Engine power
112(kW)
Engine speed
2200(r/min)
Maximum pull back force
200kN
Maximum thrust force
200kN
Forward and backward speed of power unit
0- 143mm/0-429mm
low speed 0-143mm/ high speed 0-429mm/
Maximum torque
6500Nm
Spindle speed
0-140(r/min)
Incident angle
10°-22°
Forward speed
slow speed 1.4Km/h high speed 2.35Km/h
Capacity of fuel tank
245L
Capacity of hydraulic tank
250L
Departure angle
20°
Grade ability
25°
oversize of machine
5912mmX2303mmX2166mm
Weight of machine with drill rods
9t
Maximum pressure of mud pump
9 Mpa
Maximum flow rate of mud pump
240L/min
You can find a variety of tool holders and boring bars here, they are especially hardened, high precision and with a replaceable head system.
Specification
While specializing in the production of super hard material (PCD/PCBN) tools and other products,
we can produce non-standard complete sets of composite tools, tool holders, non-standard tooling fixtures and other products according to the different use of various machining manufacturers.
For rough and finishing camshaft holes, the PCD material is not only used as the cutting edge, but also as the material of the guide strip, making full use of the low friction coefficient of PCD.
The high-precision fine-tuning mechanism design can quickly and simply adjust the tool size to the required state.
The high-rigidity locking plate provides strong pressing force and higher process safety.
Coupled with the special design of the water outlet hole, not only the tolerance, roundness and coaxiality of the camshaft hole can be guaranteed in the processing of deep and long holes, but also good surface roughness can be obtained.
Price: $28.50/ft
122 Jts / 3,937 ft (1200 Meters) (32.3 ft-avg/jt)
3-1/2 15.50# S135 R2 NC38, 4-7/8 TJ OD x 2-7/16 TJ ID, 10 x 12-1/2Tongs, M&B, No HB or IPC
Delivery: Ex-Stock: Subject to Prior sale
Mfgr: RDT (Made in USA)
Brief description
The RS-UV3C series UV laser marking machine is catering to the demand for marking and surface treatment of various glass, TFT, LCD screen, plasma screen, textile, thin ceramic, single-crystal silicon wafer, IC crystal, sapphire, polymer film, and other materials. The machine has stable performance, small size, low power consumption, high positioning accuracy, high operating efficiency, and modular design for easy installation and maintenance.
Advantage:
High beam quality, very small light spot, capable of ultra-fine marking
The heat-affected area is very small, there will be no thermal effects, the material is not deformed or burnt, the marking effect is fine and repeatable, and the high-precision and high-precision light spot guarantees the marking result. The marking process is non-contact and the marking effect is permanent.
Optional two-dimensional automatic worktable to achieve continuous multi-station marking or large-format marking, which can be coordinated with the production line, automatically loading and unloading, and automatic feeding and discharging.
The flexible and convenient operating system, humanized operation process, the special control software can realize automatic arrangement and modification of seat symbols, graphic images, bar codes, two-dimensional codes, serial numbers, etc .; support PLT, PCX, DXF, BMP, JPG and other File formats, can use TTF font directly, CCD automatically recognizes and tracks.
The marking lines are very thin, which is suitable for occasions with high marking requirements. It is mainly used for fine marking on the surface of LCD screens, lenses, ICs, and other products.
Typical application
Marking for 3C industry
Industrial micromachining
LED scribbling
Laser rapid prototyping
Silicon wafer processing
Electronic Components Engraving
PCB drilling or cutting
FPC cutting
Film etch
Glass marking
Wafer saw
Main transmission adopts srd or servo system, wide range of step-less speed change of table's movement satisfies the requirements of planning/milling/grinding at different speed, independent spindle feeding box enables more balanced feeding to process plane/inclined plane/t slot/combined guide-way/rack, etc.
1. More stable table movement.
2.To get enough lubrication of table at any speed with independent lubrication system.
Heavy & light plano miller
Core technique originates from taiwan, scientific & logical design of the structure and adoption of the advanced function unit can realize strong cutting function, high working efficiency, safe & reliable movement and long working life.
1. Heat-treatment techniques & mechanical lubrication are adopted on the guide-way of the machine body to reduce friction & prolong working life of the machine.
2. Step-less table speed change.
3. Rectangular guide-ways, rigid machine bed/beam/column ensure stability of the machine in strong cutting.
6 speed choice (Different from old single speed tool)
Suitable for HSS & TCT drill
Work with Steel & Aluminum alloy plate
1. ONE for all: with the speed switching structure, AO080AGP can achieve both high torque/low speed and low torque/high speed, which typically required at least two different types of electric and pneumatic tools.
2. The user can set up AO080AGP to 6 different levels of free speeds, started from 460 RPM to 2400 RPM. With our filed test, AO080AGP can work on 1.3mm SS 304 steel, 5mm brass plate, 6mm black iron, 11mm aluminum, and 5mm steel plate with a 25mm hole cutter.
3. Ergonomic clamp design helps the user to increase the precision of drilling. During the operation, the user does not have to give pressure on the target object by simply holding the tool and the clamp. Also, the user can adjust the clamp distance between the drill and the target object to make sure the depth of drilling in order to prevent the drill from hurting the original panel/skin.
Using as a alternative spare part for relevant machine.
As Razor Spare Parts, we provide our business partners and buyers in the best way by offering many back services besides production.
Our products can used easily for relevant machines and easy to operate. High guality production and with using life, Razor Spare Parts products separate other firm and companies.
With the first-class productions of our target products in the spare part area, we offer services with the highest quality products as well as our competitors for atlas copco, furukawa and ingersoll rand spare parts
We have services for part and the whole product. We are taking strong steps to strengthen our position in the industry and to be in the international market by offering service and solution suggestions to our customers and business partners for many products, especially atlas coppo, in hydraulic breakers and rock drilling equipment.
