Product Feature: 1. Power can be equipped by electrical motor or diesel engine; 2. Hoist adopts Frictional clutch mechanism, using powder metallurgy friction plate,with good performance and long service life; 3. With large rotary torque, has different rotating speed grades; 4. Very Effective in Diamond drilling. 5. Can be mounted on wheel-trailer, crawler or truck. Product Application: 1. ST-200 drilling rig is a new-type, portable engineering drilling machine for multiple applications. 2. ST-200 applies to water wells, geological exploration&survey, mineral prospecting, blast hole, geothermal air-conditioner holes and so on. 3. ST-200 can drill all kinds of ground,such as soil, mud, sand,gravel,weathering rocks, hard rocks and so on.
Product Feature: 1. With a hydraulic feeding mechanism, the pump mechanism and the reverse function, improve drilling efficiency, reduce labor intensity. 2. The rig is equipped with a ball with a cassette holding mechanism of six-party initiative to drill, can implement non-stop down the pole, high efficiency, safety and reliability. 3. bottom hole pressure gauge with pressure, easy to grasp hole situation. 4. handle centralized, easy to operate. 5. Compact rig structure, small size, light weight, easy to disintegration and handling, for the plains or mountain areas. 6. vertical shaft to form structures Plus, vertical through-hole diameter increased by a larger diameter drill, better adapted to high torque transmission. 7. The electric start diesel engine, convenient and secure.
Product Feature: 1. The rig is equipped with latest MW525 car transmission assembly, it owns 10 forward gears and 2 reverse gears, the gear speed design is reasonable to meet the needs of different drilling technology . 2. The drilling rig with large output torque and bearing capacity easy to handle a variety of underground accidents. Mechanical transmission structure is compact, spindle diameter is 96mm, bearing distance is big, drilling rig rigidity is good. 3. Hydraulic system controls the feeding pressure and speed to meet the needs of all kinds of formation drilling. The machine is equipped with pressure indicator at the bottom of the hole, it is easy to grasp the situation inside the hole. 4. This drilling machine is small size, light weight, good disassembly, good layout, flexible and reliable operation, easy maintenance.
1. The Horizontal Glass Drilling Machine is suitable for drilling hole for different glass thickness and drilling different diameter hole by equipping with different drilling bits. The machine is good for batch processing. 2. Two drilling spindles, one at the lower side and another upper side. When the glass is put on the table, it is fixed pneumatically and the lower spindle will rise up automatically to drill from the bottom side while the upper bit is operated by manual. 3. The cooling water runs inside the core drill so that the cooling effect is directly acted onto the glass without any loss. Holes of different sizes can be achieved with bits of different diameters.
Main Features 1. Special for drilling of aluminum window, curtain wall profiles. It is suitable for long profile process and mass production 2. Max process cross section is 250*250mm, Max process length is 5000mm 3. Pneumatic-hydraulic damp feeding system 4. This machine is equipped standard with four heads and can come with additional heads if requested
Product Feature: 1.Engine : Feed by hydraulic cylinder,the drilling efficiency is higher and it can save labor. 2.Drill rod : 53x59 drilling rod adopted,high rigidity and strong delivery torque. 3.Spindle : Vertical spindle are fixed by four groups of bearing to ensure that the rotary machine is rigid enough for gravel layer and other complex geoloical conditions. 4.Mud pump : Equip mud pump with flow 160L/min,save cost and also make the structure compact. 5.Concentrated handle, small footprint,light weight, strong decomposition, easy to move.
Product Feature: 1. With the hydraulic feeding mechanism, improve the drilling efficiency, reducing the labor intensity of workers. 2. The rig is equipped with a ball on a cassette holding mechanism and a six side rod, the rod can be replaced without shutdown, high work efficiency convenient operation, safe and reliable. 3. Furnished with hole bottom pressure gauge pressure indicator, and easy to master the status inside the hole. 4. The handle centered, convenient operation. 5. The drilling machine has the advantages of compact structure, small volume, light weight, convenient move.
Product Feature: 1. Power can be electric motor or diesel engine as options. 2. Two or four wheels can be mounted on tractors, trailers or cars. Easy for outdoor and rugged place drilling. 3. Integrated mud pump, gearbox, hoist, etc. Not only saving land, but also easy to take and operate. 4. Different operation handles to control working. One person is able to operate it. 5. Easy to assemble and dissemble. One person is able to handle.
Product Feature: 1. Used for general investigation, geophysical exploration, high-way and building construction, and blast-hole drilling etc. 2. With hydro-automatic feeding device, and high drilling efficiency. 3. Designed with hydro-chucking unit instead of slips to ensure drilling from stop when changing pipes. 4. Close levers, convenient to operate, safe and reliable operations. 5. Compact in structure. All the drill, water pump and diesel engine installed on one base frame result in space-saving. 6. Light in weight, easy disassembling for transportation and applicable to working conditions in plain and mountain areas. Product Parameter: Drilling depth 100/180 m Initial hole dia. 150mm Final hole dia. 75/46mm Drill rod dia. 42/43mm Angle range 90°-75° Dimensions(LÃ?WÃ?H) 1620Ã?970Ã?1560(mm) Weight(without power unit) 620kg Migration distance 350mm Swivel Head Spindle speed(5-speed) 1010/790/470/295/140r/min Spindle stroke 450mm Upward displacement speed of idling vertical spindle 0.05m/s Downward displacement speed of idling vertical spindle 0.067m/s Spindle pull-down max 15KN Spindle lifting capacity max 25KN Hoist Max .lifting capacity(single rope) 15KN Lifting rotating speed 121/76/36r/min Hoisting drum linear velocity (two levels) 0.166/0.331/0.733/1.465m/s Drum dia. 140mm Wire rope dia. 9.3mm Wire rope capability 35m Brake dia. 252mm Brake belt width 50mm Oil Pump Model YBC-12/80 Rated pressure 8Mpa Displacement 8ml/r Rated speed 1500r/min Power (diesel engine or motor) Model (diesel engine) S1100A2 Rated speed 2200r/min Rated power 10.3KW Model (motor) Y160M-4 Rated power 11KW Rated speed 1460r/min
Product Introduction 1. Drills up to 100-200m deep, 75-500mm diameter. 2. Full hydraulic system and crawler mounted, easy to operate and move. 3. Drill on soil, sand, rock, quarry, marble and any hard ground. 4. Used to drill for water well, geological exploration, soil sample taking, SPT Test, etc. Main features 1. Hydraulic-control drill mast,can be raised and put down by hydraulic cylinders, which saves time and worker labor. 2. Rubber track, the weight is lighter and does not hurt urban road, suitable for projects in city. 3. Four hydraulic jacks, can lift the machine to mas height 1.3m, so that the machine can be loaded from truck compartment. Also they can be used for rig leveling and support at work. 4. 24V electric-start diesel engine reduces the operator's labor intensity. 5. Independent BW-160 mud pump , has bigger flow displacement and pressure, easy maintenance. 6. Optional installation of hydraulic twist tube machine(75-168mm)imporve work efficiency and reduce labor costs.
Drilling Rig Description: 1.Construction drilling of the projects e.g. prospection, geotechnical investigation, railway, road, port, bridge, water conservancy and hydropower, tunnel, well, industrial and civil construction; 2. Core drilling, mining exploration, Or exploration; 3. Small hole diameter water well drilling; 4. Geothermal pipe-installing for heat pump; 5. Small-diameter hole foundation piling drilling. Feature: ST-200 type drilling rig is a hydraulic feeding of low speed and high torque portable drilling rig. The railway, hydro power, traffic bridges foundation and other buildings in the engineering geological investigation. The geological core drilling, geophysical survey The small grout Confucians, blast hole drill The small water well drilling. The characteristics of drilling rig: 1. With the hydraulic feeding mechanism, improve the drilling efficiency, reducing the labor intensity of workers. 2. The rig is equipped with a ball on a cassette holding mechanism and a six side rod, the rod can be replaced without shutdown, high work efficiency convenient operation, safe and reliable. 3. Furnished with hole bottom pressure gauge pressure indicator, and easy to master the status inside the hole. 4. The handle centered, convenient operation. 5. The drilling machine has the advantages of compact structure, small volume, light weight, convenient move.
ST-200 portable water well drilling rig equipped with BW-160 mud pump and 22HP diesel engine, Max. drilling depth can be 230m with the opening diameter of 75-400mm, trailer, crawler, and tractor chassis for choice. a. the machine is equipped with crawler chassis device, easy to move with fast speed. b. hydraulic oil pressure feed device, improve drilling efficiency. c. pressure gauge display the condition of the bottom of the drill hole. d. drill mast controlled by hydraulic cylinder, improve the efficiency diesel engine adopt the electric starter, to reduce the labor intensity.
ST-100 Drilling Rig widely applied in bore well drilling, underground core drilling, large-scale water conservancy projects, etc. It can work in soft soil, sediments, gravel and hard rocks. It has been exported our drilling rig to more than 20 countries, mainly Kenya, Ghana, Togo, Chili, Tanzania, Mexico, France, Canada, Lesotho, etc. Features of ST-100 Water Well drilling machine, borehole drilling machine, soil drilling rig machine: 1. Power can be electric motor or diesel engine as options. 2. Two or four wheels can be mounted on tractors, trailers or cars. Easy for outdoor and rugged place drilling. 3. Integrated mud pump, gearbox, hoist, etc. Not only saving land, but also easy to take and operate. 4. Different operation handles to control working. One person is able to operate it. 5. Easy to assemble and dissemble. One person is able to handle.
Product Parameter: (1) Rated drilling depth:200m,The deepest shall not exceed 220m. Rated opening diameter:200mm. Maximum opening diameter : 300mm. Drilling depth and drilling diameter shall be determined according to the formation conditions. (2)The vertical speed (four steps):118,236,505,1010.r/rain (3)Max output torque:1500N. m (4)Maximum weight (a speed of single rope):17KN (5)drill pipe diameter:42mm (6)Borehole inclination:90~75° (7)Rig overall dimensions·(LÃ?BÃ?H)1433Ã?697Ã?1273mm (8)Rig weight:500kg(Transfer machines 620kg, transfer machine with pump 720kg) (9)Engine model:S1115
Product Description: 1.general investigation, geophysical exploration, high-way and building construction, and blast-hole drilling etc. 2.With hydro-automatic feeding device, and high drilling efficiency. 3.Designed with hydro-chucking unit instead of slips to ensure drilling from stop when changing pipes. 4.Close levers, convenient to operate, safe and reliable operations. 5.Compact in structure. All the drill, water pump and diesel engine installed on one base frame result in space-saving. 6.Light in weight, easy disassembling for transportation and applicable to working conditions in plain and mountain areas. Product Parameter: rated drill depth 200m open hole diameter 200mm, max. 300mm spindle rotation speed 118/236/505/1010 rpm max. output torque 1500 N.m max. lifting weight (single wire) 17 KN drill rod diameter 42/50 mm hole angle 90~75º size (L x W x H) 1433 x 697 x 1273mm weight 500 kg diesel model S1100
The Hot Sale Diesel Core Drilling Rig for Mining Exploration is widely used for geothermal drilling, farm irrigation, house yard, gardens and water well drilling, drilling diameter is 70-350mm, and drilling depth is 80m to 100m. It also can be used in small building piling, like farmhouse or factory, the drilling diameter can reach 500mm and depth can be more than 100 meter. Diesel water well drilling machine price 200m bore Main Features of folded Water Well Drilling Rig Machine: 1. Light weight & Compact design, convenient to carry and keep. 2. Patented product, unique design and simple drilling structure; 3. Easy to transport and can learn how to handle the machine in short time; 4. Can drill through hard stratum, unless thick rock layer; 5. One person operation, reduce the labor intensity; 6. High efficiency and work fast. 7. Assure easily operation and long life service life, free maintenance
Drilling depth 200m Maximum open hole caliber 400mm End hole caliber 75mm Diameter of drill rod 50mm Drilling angle 90~75 Weight(not include power) 760kg Dimension 2750*950*1600mm 2. Vertical shaft Rotating speed 71,142, ,310,,620r/min Feeding stroke 450mm 3.Hoist Max. single line hoisting capacity 2400Kg Diameter of wire rope 13mm Volume of winding drum 35m Hug floodgate caliber 230mm Hug floodgate belt width 70mm 4.Mud pump Type Horizontal single urn twin-action Rate of flow 180L/min MAX. pressure 1.5MPa Working pressure 0.7MPa Diameter of water inlet tube 50mm Diameter of water outlet tube 45mm 5.Power Diesel engine 22HP, 2200r/min
Product Applications: 1.Construction drilling of the projects e.g. prospection, railway, road, port, bridge, water conservancy and hydropower, tunnel, well, industrial and civil construction 2. Coal mining exploration, Ore exploration 3. Small hole diameter water well drilling 4. Geothermal pipe-installing for heat pump 5. Small-diameter hole foundation piling drilling;
A self propelled track/crawler drilling platform are introduced to make the transporting of the drilling rigs and accessories easy. Various model can be mounted to the track/crawler, such as ST-100, ST150 series, ST-200 series. Because ST-150H, ST-200-2A can slide on frame to give space to handle the drilling strings, this makes them very suitable model to be mounted on track/crawler. Also they are powerful rigs capable of drilling up to 150m/200m respectively. Mud pump also can be mounted. Drilling rods, core barrels and other tools can put on the platform, it is very convenient to move the whole system. The track/crawler can be sold alone, or together with the mounted rigs and mud pumps. Track Width 350mm Bearing Capacity 3000 kgs Track-Ground Contact Length 1800mm Tower Height 6700mm Min Ground Clearance 250mm Tower Hoisting Capacity 3000 kgs Gradeability 25° Dimension 3500*1900*2200mm Walk Speed 5-10 km/h Weight 2200 kgs
1. Engine: Feed by hydraulic cylinder,the drilling efficiency is higher and it can save labor. 2. Drill rod: 53x59 drilling rod adopted,high rigidity and strong delivery torque. 3. Spindle: Vertical spindle are fixed by four groups of bearing to ensure that the rotary machine is rigid enough for gravel layer and other complex geological conditions. 4. Mud pump:Equip mud pump with flow 160L/min,save cost and also make the structure compact. 5. Concentrated handle, small footprint,light weight, strong decomposition, easy to move.
