1.Made of 4145H alloy structural steel. 2.Production complies with the provisions under the Standard SY/T 5146-1997. Connector screws comply with the provisions of the Standard API SPEC 7-1. 3.The tube section has a larger diameter at mid length to protect the heavy weight drill pipe from wear. 4.Hardbanding and Internal Coating can be provided on customer request.
1.The product is used for the reaming of the oil, gas, petrochemical, sewage, power and fiber optic pipelines in the no-dig horizontal directional drilling. 2.Directional crossing operation is widely used in unexcavated project. 3.Small torque force can be applied to hole opening with drilling machine. 4.Hole opener includes body and the cutter. 4 different types of cutter can be assembled to the body in one size for opening the hole in 4 sizes. 5.Cutter can be divided into MT type used in soft formation and TCI type used in hard formation.
1.API standard drilling cross-over sub 2.BOX x BOX, BOX x PIN, PIN x PIN 3.Different API Standard connection type, e.g. NC, REG, FH, IF etc. 4.Apply to HDD, Geothermal, Gas, Oil and Water well drilling.
Model KD600 - Function: drilling - Number of pully: 2 units - Drill route: 50 mm - Distance from spindle nose to the table: 120 mm - Distance from center of spindle nose to column: 104.5 mm - Column diameter: �? 46.5 mm - Bit diameter: �?1.5 - �?13 - Motor: 1/4HP â?? 1 phase â?? 4P (220V/50Hz) Model KD800 - Function: Drilling - Number of pully: 2 units - Drill route: 58 mm - Distance from spindle nose to the table: 255 mm - Distance from center of spindle nose to column: 126.5 mm - Column diameter: �? 58.5 mm - Bit diameter: �?3 - �?13 - Motor: 1/2HP â?? 1 phase â?? 4P (220V/50Hz) Model KDC800 - Function: drilling and tapping - Number of pully: 3 units - Drill route: 58 mm - Distance from spindle nose to the table: 245 mm - Distance from center of spindle nose to column: 126.5 mm - Column diameter: �? 58.5 mm - Bit diameter: �?3 - �?13 - Motor: 1/2HP â?? 1 phase â?? 4P (220V/50Hz)
NFPA 130 Standard for fixed guideway transit and passenger rail systems Standard Introduction This standard shall cover fire protection requirements for underground, surface, and elevated fixed guideway transit and passenger rail systems, including trainways, vehicles, and vehicle maintenance and storage areas, and for life safety from fire in fixed guideway transit and passenger rail system stations, trainways, vehicles, and outdoor vehicle maintenance and storage areas. Test Method Surface Material : ASTM E162 Surface Flammability & ASTM E662 Smoke Density Elastomers : ASTM C 1166 & ASTM E 662 Fabrics : 14 CFR 25 & ASTM E 662 Cushioning : ASTM D 3675 & STM E 662 Small Compoment : ASTM E 1354 Heat Release Reference Standards ASTM E 162 Surface Flammability of Materials Using a Radiant Heat Energy Source ASTM E 662 Specific Optical Densityof Smoke Generated by Solid Materials ASTM C 1166 Flame Propagation of Dense and Cellular Elastometric Gaskets ASTM D 3675 Surface Flammability of Flexible Cellular Materials ASTM E 1354 Test Method for Heat and Visible Smoke Release Rates Bombardier SMP800-C Toxic Gas Generation Test We also can provide the following service of fire test to Railway EN45545-2 Fire protection of railway vehicles: Requirement for fire behaviors of materials EN45545-3 Fire resistance requirements for fire barriers NFPA 130 Standard for fixed guideway transit and passenger rail systems DIN5510-2 Fire behaviour of materials and parts, classification, requirement and test methods BS6853 Code of practice for fire precautions in the design and construction of passenger carrying trains NF F16-101 Railway Rolling Stock Fire Behavior Choice of Material
Brand : Cock Brand and Sea Horse Brand Diameter : From 1.5mm to 120 mm Number of strands : 3,4,8 Core : No Main material : Polypropylene Composition : PP, PE, Masterbatch, UV Color : Light brown, Yellow, Yellowish Orange, Grey, White, Blueâ?¦ Diverse colors with more than 20 durable colors prevent the productâ??s color from fading away as being used Length : Standard roll of 200m and as ordered by customers Quality standard: According to TCCS no.01-2013/Siam Brothers VN, dated 04/09/2013. Characteristics : - Durable and highly adhesive - High anti-corrosion ability - High tensile strength ( 50% higher than other types of rope) - Light weight, float on water - High ultraviolet ray resistance - High temperature bearing capacity, no decaying, no oil penetration or dissolving in any chemical. Application: Mooring rope, tail rope, main rope of net, trawl rope, sport, maritime transportation, industry and agriculture, etc. â?¦ Cautions: - Use less than 80% of standard tensile strength - Avoid contacting with heat, fire, chemical, sharp objects. - Avoid sunlight if products are not used in a long time Produced by: Siam Brothers Viet Nam Joint Stock Company.
Description: Drilling hose(rotary hose)made according to API 7K spec, applies for flexible hose connection between the top of oil drilling stand pipe and vertical moved swivel joint in well drilling, well cementing, work-over and down-hole servicing operation. drilling hose is also used to adjust the installation mistake between drilling pipe line and stand pipe to avoid shake, sometimes to transfer high pressure oil and water base mud with the lowest aniline point of 60�°C from the swivel pipe in high pressure, and down-hole operation high medium such as water, oil etc, drilling rotary hose can be used for prefect work too.
Description: A� rotary table is a mechanical device on a drilling rig that provides clockwise (as viewed from above) rotational force to the� drill string� to facilitate the process of drilling a� borehole.
Drill subs are an important integral part of everyday drilling. Not having the right thread adapter can make your life miserable. We have a large inventory of common and not so common sizes. Custom sizes are always available. Rotary subs have two primary applications. They can be used to cross over from one connection size to another, or as the disposable component used to extend the connection life of a more expensive drill stem member. Installing a float sub (with check valve) is always a good idea when drilling in wet situations.
Drill Collars are integral heavy-wall joints that are manufactured from a solid bar of modified alloy steel. The solid bars are quenched and tempered to obtain the required mechanical properties, then trepanned, drifted and threaded. All drill collars are heat-treated with hardness within 285 to 341 BHN, which are guaranteed one inch below the surface of the pipe. Lake Petroleum could supply slick type drill collar, spiral drill collar and Non-magnetic drill collar (NMDC).
Downhole motor is a kind of downhole power frilling tools by mud. The mud output by the mud pump, will enter the motor through the bypass valve, and a certain pressure difference will be formed at the inlet and outlet of motor, to push the rotor of motor to rotate, and to transfer the torque and the RPM to the drill bit via the universal shaft and the driving shaft. Drilling downhole motors offer a wide range of configurations to meet different needs. These motors have the power, torque, and speed to drill with the PDC bits for specific downhole conditions or well designs. Using the latest available technology and materials, the motors can be used in an extensive range of drilling applications, such as: Vertical, directional, and horizontal wells High temperature Synthetic-, oil-, and water-based mud systems Performance drilling Extended-reach wells
Lake Petroleum could supply a huge quantity of new drill pipe for sale, available in all standard sizes and weights, to quickly meet the drilling equipment needs of companies in the oil, gas and Geothermal industry.
Description: Stop Collar is also called limit ring, stop ring, brake ring and so on. Used to limit the sliding of the centralizer or cement umbrella on the inner casing. There are slip-on stop collar, hinged spiral nail stop collar, hinged bolted stop collar and hinged set screw stop collar and so on.
Tap Oil-coolent The Tapping Thick Oil Which Makes Any Difficult Tapping Make More Easy. It Is Being Successfully Used On Bottleneck Tapping Operation. Extreme Pressure Additives Incorporated In �??tapping Oilâ??.
The tapping thick oil which makes any difficult tapping make more easy. it is being successfully used on bottleneck tapping operation. extreme pressure additives incorporated in tapping oil.
. consumption instruction Drilling foam is used in various air drilling operations. These foamers allow air or gas to penetrate into water-resistant compounds. This product is compatible with all types of natural, salty and heavy waters. Known name: Drilling Foamer Features and benefits of oil drilling foam product: · Environmentally friendly, biodegradable and non-toxic · Very useful in producing high quality foam and high durability · Compatible with all types of water, including natural, saline and heavy water · Amount of cleaning and penetration holes increases
One of the requirements of the drilling industry is undoubtedly the drilling mud. The drilling mud circulation system contributes greatly to the success of drilling operations. In general, each drilling fluid has two main phases: continuous phase and discontinuous phase Drilling flowers are divided into the following groups based on their continuous phase: · Blue base flower · Oil base · Gas base To change and improve the characteristics of the drilling mud, they add materials called drilling mud additives . As you know, oil and water do not dissolve and they are incompatible. If we shake the oil and water mixture vigorously, the two liquids will spread together, forming an emulsion. When an emulsion stays in place for a while, the oil droplets begin to separate from the water. An emulsifier is used to stop this process. The emulsifier actually prevents the emulsion from breaking
This polymer is a molecule of the same long, heavy chains composed of identical, water-soluble fragments. This polymer dissolves in the form of long fiber-like fibers in water and is one of the newest additives for drilling fluid. This material encloses the wells drilled in the well wall in the form of cages and covers them in accumulations, preventing them from dissolving and overheating in the drilling fluid. This material is more for the stability of active shales in the fluids. The blue base used is PHPA, part of a recycled acrylamide polymer that is used to stabilize shale formations in wells or to disperse bentonite in light fluids. The benefits of PHPA produced by Nano Baspar Aitek are as follows: Carrying out the stumps and preventing them from spreading Provide stable conditions for well wall shales Optimizing the action of repelling unwanted solids in the pure water system and increasing the power of carriers in the Bakf drilling system The presence of this substance in liquid form causes ease and speed in mixing The low drop point of this material and the possibility of using it in cold regions Possibility of using this material as granulose in light fluids without solids
Truck Mounted Well Drilling Rig Features JKCS300 truck mounted versatile well drilling rig is a new, efficient and multifunctional hydraulic rig, mainly applicable to all kinds of drilling process of wells, monitor boreholes, geothermal boreholes, and grouting holes of cofferdam, dam and reinforced base, as well as drilling of open pit mining, anchor reinforcement project and defense project. The rig equips with powerful hydraulic motor, heavy hydraulic drilling arm and high pressure DTH percussive hammer, and its drilling speed is faster than other type of rigs. Truck Mounted Drilling Rig parameters Specifications of JKCS300 Versatile Well Drilling Rig Borehole Diameter Ï?105-350mm Borehole Drilling Depth 300m Working Air Pressure 1.05-3.05MPa Air Consumption 16-35m³/min Rod Diameter Ï?89mm, Ï?102mm, Ï?114mm Rod Length 3m / 4.5m Grade Ability 15° Winch System ( standard main winch & optional tooling winch) Lifting Force 15t Lifting Height 8m Feed System Axial Pressure ±6t Rotation Torque 4500N.m 8500N.m Rotation Rate 0-80rpm 0-160rpm Weight 8t (excluding vehicle) Dimension (L x W x H) 10500mm x 2480mm x 3050mm (transport) Working Size (L x W x H) 11000mm x 2480mm x 7147mm If you are finding Truck Mounted Drilling Rig Factory, we will be your best choose! We are dedicated to providing our customers with high quality and hightech products.
Crawler Mounted Versatile Well Drilling Rig Truck Mounted Well Drilling Rig Its smaller size can be adapted to various construction sites. Rated Drilling Depth 300m Application JKS300B Crawler Mounted Versatile Well Drilling Rig is applicable to the drilling process of water wells, monitor wells and geothermal wells, etc. Product Features JKS300B Crawler Mounted Versatile Well Drilling Rig is a new type of efficient and versatile hydraulic rig. It is mainly applicable to the drilling process of water wells, monitor wells, and geothermal wells. When drilling in the rock layer, the rig adopts DTH hammer for penetration and compressed air for cleaning, with a penetration speed being dozens of times quicker than conventional rotation rigs. In loose rock, the rig employs a cutting bit or cone bit and uses mud to clean the dirt, its versatility suiting for all kinds of complex geological conditions. Winch can lift stuff upwards of 6m, facilitating installing pipes. Hydraulic supporters facilitate the rig erection on site without crane. Smaller size makes it adaptable to various kinds of construction sites. We also provide Truck Mounted Well Drilling Rig ,Airman Air Compressor,Hydraulic Crawler Drills and soon Rated Drilling Depth 300m Borehole Diameter 105-350mm Engine Power 92kW Maximum Lifting Force 15T Small Winch Lifting Force 1.5T Rotation Torque 8500N.m Rotation Rate 0-40/80rpm
