D6 is a type of residual fuel, mainly used in power plants and larger ships. The fuel requires to be preheated before it can be used. It is not possible to use it in smaller engines or vessels/vehicles where it is not possible to pre-heat it. D6 is its name in the USA. In other parts of the world it has other names. Residual means the material remaining after the more valuable cuts of crude oil have boiled off. The residue may contain various undesirable impurities including 2 percent water and one-half percent mineral soil. D6 fuel is also known as residual fuel oil (RFO), by the Navy specification of Bunker C, or by the Pacific Specification of PS-400. Recent changes in fuel quality regulation now require further refining of the D6 in order to remove the sulfur, which leads to a higher cost. Despite this recent change, D6 is still less useful because of its viscosity as well as that it needs to be pre-heated before it can be used and contains high amounts of pollutants, such as sulfur. Since it requires pre-heating, it cannot be used in small ships or boats or cars. However large ships and power plants can use the residual fuel oil.
EN590 was introduced to coincide with the development of new emissions standards across the European Union. The overall goal has been to reduce the sulphur content of diesel fuel. Sulphur had been used as a lubricant in the fuel. Its role is taken by special additives in ULSD. Since 2007, diesel that conforms to EN590 has been referred to as Ultra Low Sulphur Diesel (ULSD) in the European Union. The phrase Ultra Low Sulphur Diesel is governed by different standards in other parts of the world. EN590 describes the physical properties that all automotive diesel fuel must meet if it is to be sold in the European Union, Croatia, Iceland, Norway and Switzerland. The EN 590 had been introduced along with the European emission standards. With each of its revisions the EN 590 had been adapted to lower the sulphur content of diesel fuel since 2007 this is called ultra low sulphur diesel as the former function of sulphur as a lubricant is absent (and needs to be replaced by additives). The quality of European diesel fuels is specified by the EN 590 standard. While these specifications not are mandatory, they are observed by all fuel suppliers in Europe. Automobile diesel en 590 is intended for application in diesel engines. Diesel motor fuel quality meets the requirements of European Standard EN 590. For operation in the conditions of a temperate climate following marks of fuel diesel automobile EN 590 are offered: Grade C limiting filterability temperature -5 C; Grade D limiting filterability temperature -10 C; Grade E limiting filterability temperature 15 C; Grade F limiting filterability temperature -20 C. The entire volume of produced diesel fuel quality meets the requirements for fuels for vehicles of Euro 4 and Euro 5. Low sulfur content in diesel EN 590 reduces emissions of sulfur oxides into the atmosphere, which is especially important for for inhabitants of big cities.
EN 590 Gas Oil is a 10 ppm (parts per million) sulphur content gas oil. It has a higher cetane number than A2 Class Gas Oil (another 10ppm sulphur content class of red diesel), making it better suited to internal combustion engines in off-road vehicles.
Description: Automotive Gas Oil (AGO), commonly referred to as diesel fuel, is a vital component in the automotive industry, powering a wide range of vehicles, from cars and trucks to buses and heavy-duty machinery. Renowned for its efficiency, reliability, and versatility, AGO is the fuel of choice for millions of drivers worldwide. Key Features: High Energy Density: AGO boasts a high energy density, providing exceptional fuel efficiency and optimal engine performance, whether cruising on the highway or hauling heavy loads. Clean Combustion: Engineered for clean combustion, AGO minimizes emissions of harmful pollutants such as sulfur oxides (SOx), nitrogen oxides (NOx), and particulate matter (PM), ensuring compliance with environmental regulations and reducing environmental impact. Cold Weather Performance: Formulated with additives to enhance cold flow properties, AGO remains fluid even in frigid temperatures, facilitating reliable engine starting and smooth operation in cold climates. Engine Compatibility: Compatible with a wide range of diesel engines, including modern high-pressure common rail (HPCR) systems, AGO delivers consistent performance and reliability across various vehicle types and models. Long-Term Stability: Engineered for long-term stability and storage, AGO maintains its integrity and performance characteristics over time, minimizing fuel degradation and ensuring reliable operation even during prolonged storage periods. Target Audience: Private Vehicle Owners: Ideal for owners of diesel-powered cars, SUVs, and pickup trucks, AGO provides reliable fueling solutions for daily commuting, road trips, and recreational activities. Commercial Fleets: Trusted by businesses operating delivery vans, trucks, and buses, AGO offers cost-effective fueling options for fleet management, logistics, and transportation services. Construction and Agriculture: Essential for heavy equipment and machinery used in construction, agriculture, and mining, AGO powers tractors, excavators, and other diesel-powered vehicles with exceptional performance and reliability. Experience the Power and Efficiency of Automotive Gas Oil (AGO) for Your Driving Needs!
Description: D6 Virgin Fuel Oil is a premium-grade fuel renowned for its exceptional purity and performance. Produced through a stringent refining process, D6 Virgin Fuel Oil meets the highest industry standards and is widely recognized for its reliability and versatility across various applications. Key Features: Virgin Quality: D6 Virgin Fuel Oil is derived from virgin crude oil feedstock, ensuring superior quality and consistency in every batch. Low Sulfur Content: With a low sulfur content, D6 Virgin Fuel Oil complies with environmental regulations, reducing emissions and minimizing environmental impact. High Energy Density: Boasting a high energy density, D6 Virgin Fuel Oil delivers optimal fuel efficiency and maximum power output, making it an ideal choice for demanding industrial and commercial operations. Excellent Stability: Engineered for long-term stability and performance, D6 Virgin Fuel Oil maintains its integrity even under extreme conditions, providing reliable fueling solutions for critical applications. Wide Range of Applications: From power generation and industrial heating to marine propulsion and aviation, D6 Virgin Fuel Oil offers versatile fueling options for diverse industries and applications. Benefits: Reliability: Backed by stringent quality control measures and rigorous testing, D6 Virgin Fuel Oil offers unmatched reliability and consistency, ensuring uninterrupted operation and minimal downtime. Environmental Compliance: With its low sulfur content and adherence to regulatory standards, D6 Virgin Fuel Oil helps organizations meet environmental compliance requirements and reduce their carbon footprint. Cost Efficiency: By maximizing fuel efficiency and minimizing waste, D6 Virgin Fuel Oil helps organizations optimize their operational costs and enhance overall profitability. Versatility: Suitable for a wide range of industrial and commercial applications, D6 Virgin Fuel Oil provides flexible fueling solutions tailored to the unique needs of each customer. Target Audience: Power Generation Industry: Ideal for power plants and utilities, D6 Virgin Fuel Oil offers reliable and cost-effective fueling options for electricity generation and grid stability. Industrial Sector: From manufacturing facilities to industrial boilers, D6 Virgin Fuel Oil provides efficient and sustainable fueling solutions for various industrial processes and heating applications. Marine and Aviation: Trusted by shipping companies, cruise liners, and airlines, D6 Virgin Fuel Oil powers marine vessels and aircraft with exceptional performance and reliability. Experience the Power of Pure Performance with D6 Virgin Fuel Oil!
Diesel Gasoil EN-590 10PPM is a premium-grade diesel fuel that meets the stringent European Union standards for quality and environmental performance. With a maximum sulfur content of 10 parts per million (PPM), this ultra-low sulfur diesel (ULSD) offers exceptional cleanliness and efficiency, making it an ideal choice for modern diesel engines. Key Features: Ultra-Low Sulfur Content: Contains only 10 parts per million of sulfur, ensuring reduced emissions and enhanced environmental sustainability. High Energy Density: Provides superior energy density, resulting in improved fuel efficiency and engine performance. Engine Compatibility: Compatible with a wide range of diesel engines, including modern high-pressure common rail (HPCR) systems, ensuring optimal performance and reliability. Enhanced Lubricity: Formulated with additives to enhance lubricity, protecting critical engine components and prolonging engine life. Cold Weather Performance: Engineered to perform well even in cold weather conditions, with excellent cold flow properties for reliable starting and smooth operation in sub-zero temperatures. Benefits: Environmental Sustainability: By significantly reducing sulfur emissions, Diesel Gasoil EN-590 10PPM helps mitigate air pollution and minimize environmental impact, contributing to a cleaner and healthier environment. Improved Engine Performance: With its clean-burning properties and high energy density, this diesel fuel ensures optimal combustion, resulting in increased power output, reduced fuel consumption, and lower maintenance costs. Compliance with Regulations: Meets the strict quality standards set forth by the European Union for diesel fuel, ensuring compliance with regulatory requirements and avoiding costly penalties. Versatility: Suitable for a wide range of applications, including transportation, industrial, agricultural, and commercial use, providing versatility and reliability across various industries. Target Audience: Transportation Companies: Ideal for trucking companies, logistics providers, and fleet operators seeking to optimize fuel efficiency and minimize emissions in their diesel-powered vehicles. Industrial Users: Suitable for use in generators, machinery, and equipment in various industrial settings, offering reliable performance and compliance with environmental regulations. Commercial Businesses: Suitable for use in commercial vehicles, construction equipment, and agricultural machinery, providing dependable fueling solutions for daily operations. Make the Switch to Diesel Gasoil EN-590 10PPM and Experience Cleaner, More Efficient Diesel Power!
As Per Seller Procedure only Dip and pay CIF FOB
As Per Seller Procedure only. Dip and pay CIF FOB
As Per Seller Procedure only. Dip and pay CIF FOB
We are supplier and exporter of Diesel. We have various types of Diesel. Petroalliance diesel fuel is the second distillate of crude oil. Ultra-low sulfur grades of D2, such as GOST 305-82, with a reduce sulfur content to a maximum of 0.02 percent and reduce sulfur pollution emissions. Diesel fuel is often used in diesel engines. Diesel engines or compression ignition engines, rely on the temperature increase of compression, rather than on spark plugs, to achieve reliable ignition timing and combustion efficiency.
CIF EN-590 10ppm Diesel -12 Month Contract Production Procedures: Please Note: I'm direct to the seller of a billion dollar global trading company who specializes in gas and grains trading. We have impeccable due diligence and a successful 40 year track record. (We have our own refinery in Kazakhstan) Product: EN590 Diesel 10ppm Origin: Kazakhstan - (Our own refinery) Delivery: CIF to any safe world port MOQ: 25mt Quantity & Fixed Pricing: 25mt= $640 50mt= $635 100mt=$630 Commission: $5 per MT starts with you. (sell side closed) CIF Transaction Procedures: 1. Buyer issues LOI/ICPO. 2. Seller issues Draft Sales Purchase Agreement Contract and for Buyer's review and signing. 3. Buyer and Seller sign Sales Purchase Agreement Contract and the Buyer will send Draft Banking instrument verbiage for review. 4. Seller sends partial POP to Buyer via email: (a) Statement of Availability of Product (b) Seller's Irrevocable Commitment to Supply (c) Product Passport (d) Certificate of Product Origin (e) ATSC (Authorization to Sell and Collect) 5. Buyer sends the Final Draft of LC/SBLC for Sellerâ??s approval. 6. Buyer's Bank Swift the irrevocable, operative, transferable, divisible, confirmed and fully Funded Documentary Letter of Credit IRDLC to the Seller's bank. 7. Seller sends the full POP and 2% Performance Bond to Buyer's bank. 8. Shipment commences as scheduled in the contract and upon arrival of the cargo at the discharge port and after SGS/Q&Q, or equivalent inspection, immediately Buyer's Bank releases the Total Value of the Shipping to Seller's Bank within 48 hours (two banking days) by MT103 against shipping documents specified. 9. Seller pays all intermediaries involved in the transaction as per IMFPA within 48 hours. Notes: 1) Seller will allow transferable sblc/dlc and non-transferable sblc/dlc as a finance instrument. 2) Buyer must submit Loi/icpo to start engagement with our seller. 3) No brokers please. Only direct buyers or direct buyer reps.
EN590 Diesel Fuel EN590 DIESEL FUEL PRODUCT ORIGIN: KAZAKHSTAN DELIVERY: CIF, FOB, TTO INSPECTION: SGS PAYMENT METHOD: TT, MT103, TRC20USDT Quantity. 100, 000MT per month for 13 months. Shipping Terms. CIF is possible, yes. Destination Port. Jurong Singapore possible
EN590 10PPM 50PPM Origin Non-Sanction Country
Cetane Number 51 min Density at 15�°C 820-845 Kinematic Viscosity 2.0-4.5 at 40 C Sulfur Content 10 max Distillation, 90% Recovered at �°C 370 max Total Contamination 24 max Copper Strip Corrosion, 3 hrs at 50�°C Class 1 max Water Content 200 max Sediment Content 0.05 max Cloud Point -5 max Pour Point -15 max Ash Content 0.01 max
Looking for buyers. EN590 10ppm available in Singapore and Malaysia. >> No any upfront/deposit >> No LC >> Payment after Dip Test by MT103/TT >> TTO / TTV / TTT Dip and pay >> Origin: Kazakhstan >> Price: USD$465 PER MT(non negotiable) >> Quantity: At least 100,000 metric tons per month 12 consecutive months
I'm end seller. $480/MT CIF AWSP minimum 50,000MT/month for a year. Ship to your Tank. Shipping straight from refineries to any safe world port. No any upfront/deposit. 2% PB to buyer for guarantee of delivery. ~PRODUCT:DIESEL FUEL EN590-10PPM ~ORIGIN:Kazakhstan ~CURRENCY:USD ~Price: USD$480 PER MT ~QUANTITY: At least 50,000 metric tons per month 12 consecutive months ~DESTINATION: SHIP TO TANK xxx PORT /ASWP ~MODE OF PAYMENT: SBLC/DLC + MT103/TT(No any upfront/deposit) ~2% PB to buyer for guarantee of delivery Best Regards,
High quality Diesel EN590 10 ppm with origin from Central Asia - No Kazakhstan origin! Loading Ports: FOB Rotterdam, Houston, Fujairah, Jurong Agreement Payment: MT103 Wire Transfer or Telegraphic Transfer (TT) Min MOQ: 50,000 Metric Tons per Month Max MOQ: 300,000 Metric Tons per Month
Our 10PPM Diesel Fuel, compliant with GOST R 52368-2005 and EN590 standards, is a premium quality diesel fuel designed for high-performance and efficiency. This diesel fuel contains a maximum sulfur content of 10 parts per million (PPM), making it an environmentally friendly option that meets stringent European emission standards. Key Features: 1. Low Sulfur Content: With a maximum of 10 PPM sulfur, this diesel fuel significantly reduces harmful emissions, contributing to a cleaner environment. 2. High Efficiency: Engineered for optimal combustion, it ensures excellent engine performance and longevity. 3. Regulatory Compliance: Conforms to GOST R 52368-2005 and EN590 standards, ensuring reliability and quality. 4. Versatility: Suitable for use in a wide range of diesel engines, from passenger vehicles to heavy-duty industrial machinery. Benefits: 1. Environmental Protection: Lower sulfur content means reduced sulfur dioxide emissions, helping to combat air pollution. 2. Engine Protection: Enhances engine durability by reducing wear and deposits, leading to lower maintenance costs. 3. Fuel Economy: Improved combustion efficiency results in better fuel economy, saving costs in the long run. 4. Compliance Assurance: Meets international standards, ensuring compatibility and regulatory compliance across different regions. Choose our 10PPM Diesel Fuel for a cleaner, more efficient, and environmentally responsible fuel solution that does not compromise on performance.
Metal and energy
Metal and energy
