Diesel Suppliers and Manufacturers

We sell Oil and Gas Products Wholesale Ultra -low sulphur diesel ( EN590) Liquified natural gas Liquified petroleum gas Ultra -low sulphur diesel ( EN590) Light cycle oil Petroleum coke Eastern Siberia-pacific ocean oil ( espo) Jet fuel A1 Mazut Aviation fuel A-1 & Jp54 Bitumen Base oil Diammonium phosphate Naphtha Ultra Low Sulfur Diesel EN590,DIESEL D2,DIESEL VIRGIN OIL D6

We sell Oil and Gas Products Wholesale Diesel gas d2 gost 305-82 Liquified natural gas Liquified petroleum gas Ultra -low sulphur diesel ( EN590) Light cycle oil Petroleum coke Eastern Siberia-pacific ocean oil ( espo) Jet fuel A1 Mazut Aviation fuel A-1 & Jp54 Bitumen Base oil Diammonium phosphate Naphtha Ultra Low Sulfur Diesel EN590,DIESEL D2,DIESEL VIRGIN OIL D6 We are an oil and gas company Agents, Facilitators and Mandate; we source crude oil for Refineries and large volume buyers, and other petrochemicals like AGO, LPFO, PMS, DPK and other Russia product origin listed below for the upstream and downstream sectors consumption. 1) D2- Gas Oil (Diesel) Lo.2-62 Gost 305-82 , Quantity- 50,000mt 500,000mt For Cif And Fob, Spot And Contract Basis. 2) Jp54 Aviation Kerosine Colonial Grade 54 Russia Origin, Quantity- 1,000,000bbls 8,000,000bbls For Cif And Fob, Spot And Contract Basis. 3) Aviation Turbine Fuel Jet A-1 Quantity- 1,000,000bbls 8,000,000bbls For Cif And Fob, Spot And Contract Basis. 4) Bitumen Quantity 50,000mt 500,000mt, Cif And Fob, Spot And Contract Basis. 5) M100 Mazut 100 Gost 10585-99 And 10585-75, Quantity- 50,000mt 500,000mt, Cif And Fob, Spot And Contract Basis. 6) Liquid Petroleum Gas.Gost 20448-90, Quantity 50,000mt 500,000mt, Cif And Fob, Spot And Contract Basis. 7) Liquified Natural Gas, Quantity 50,000mt 500,000mt, For Cif And Fob, Spot And Contract Basis. 8) Russia Sn 150 Base Oil, Quantity - 5,000mt 50,000mt, For Cif And Fob, Spot And Contract Basis. 9) Russia Sn 500 Base Oil, Quantity 5,000mt 50,000mt, For Cif And Fob, Spot And Contract Basis. 10) En590 Biodiesel, Quantity 50,000mt- 500,000mt, For Cif And Fob, Spot And Contract Basis. 11) Automotive Gas And Oil (Ago), Quantity 50,000mt 500,000mt, For Cif And Fob, Spot And Contract Basis. 16) Russia Export Blend Crude Oil (Rebco), Quantity 1,000,000bbls 6,000,000bbls, For Cif And Fob, Spot And Contract Basis.

Virgin Oil D6, also known as residual fuel oil, is a petroleum product that is obtained from the refining process. It has a high density and a high viscosity, making it a suitable heavy fuel oil used in large marine engines and power plants that require high levels of energy. Virgin Oil D6 is produced from the residue left over after the lighter hydrocarbons, such as gasoline and diesel fuel, are removed from crude oil. It is a heavy, black viscous liquid that is resistant to flow. The product has a high sulfur content, typically between 2.5% and 4%, and a calorific value of approximately 38 MJ/kg.

EN590 Diesel (10PPM) ULSD (Ultra Low Sulfur Diesel) is a premium diesel fuel that conforms to the European standard EN590, with an ultra-low sulfur content of only 10 parts per million (PPM). This type of diesel is known for its environmental benefits and is widely used in modern diesel engines.

1. BUYER issues LOI with full company KYC including: Company Details, Contact Details for Signing Authority, and Passport Facing Page.2. SELLER issues Soft/Full Corporate Offer SCO/FCO) including: Full Company Details, Contact Details for Signing Authority, Passport Facing Page, and Company Banking Details.3. BUYER accepts terms and issues Irrevocable Corporate Purchase Order (ICPO) addressed to the SELLER. ICPO MUST include SELLERâ??S procedures on BUYERâ??S official company letterhead.4. Included with ICPO, BUYERâ??S Bank issues a BCL/POF/RWA bearing the SCO REF Number: SCOKVPL0524001 a. BUYER authorizes SELLER and/or SELLERâ??S Financial Service Provider to verify BCL/POF/RWA via BUYERâ??S Bank. 5. SELLER issues PPOP upon successful verification of BUYER bank BCL/POF/RWA. Documents included in the PPOP document package are:a. SELLER Bill of Lading b. Loaded SGS Report Q&Q -(Notarized).c. Chief Officers Ullage report-(Notarized) d. SELLER Charter Party Agreement (CPA) e. Product Passport (product analysis report) -(Notarized) f. Certificate of Origin -(Notarized) g. Statement of Product Availability -(Notarized) h. Commitment and Assurance Letter to supply -(Notarized) i. Authority to sell and collect (ATSC) -(Notarized) 6. End-to-end procedure after issuing PPOP is NOT expected to exceed TEN (10) working days, including 96 hours for vessel loading laycan. 7. Included with PPOP, SELLER issues Commercial Invoice (CI), and NCNDA / IMFPA to BUYER. 8. The BUYER signs and returns the executed documents to the SELLER. If the documents are not executed in a timely fashion. The SELLER may terminate this agreement without prejudice to any rights or remedies of the SELLER. Notice will be in writing. 9. After safely receiving the PPOP and returning the executed CI and documents. The BUYER MUST issue either MT 700 DLC or MT 799 BLOCKED FUNDS to the full value of commercial invoice amount. 10. Additionally, the BUYER MUST present his vessel for loading in the nominated port and be ready within 24 Hrs to load the full cargo. When requesting the UDTA to be issued, BUYER MUST provide the following details to the SELLER: a. VESSEL NAME b. VESSEL Q88 c. Vessel Agent full contact details 11. After fund instruments and vessel nomination details are received. The SELLER will issue Unconditional Dip Test Authority (UDTA) to the BUYER. SELLERâ??S agent will contact the BUYERâ??S agent and program the vessel for ShipTo-Ship (STS) loading within 24 hours. 12. BUYER loading LAYCAN will commence 24hrs after the UDTA is issued to the BUYER. BUYER has 96 hours Laycan to finish loading the vessel. CIN: U74999DL2016PTC298417 13. BUYER Dips Tanks prior to vessel berthing. BUYER obtains fresh SGS Quantity and Quality report. 14. After successful Dip Test and Q&Q report. BUYER instructs account manager to make full payment of the full value of commercial invoice via SWIFT MT103 to SELLERâ??S nominated accounts.

As a transportation fuel, diesel fuel offers a wide range of performance, efficiency, and safety features. Diesel fuel also has a greater energy density than other liquid fuels, so it provides more useful energy per unit of volume

Property Specification Appearance Clear and Bright Density @ 15C 820 - 845 kg/m Viscosity @ 40C 2.0 - 4.5 mm (cSt) Flash Point Minimum 55C Sulfur Content Maximum 10 mg/kg (10 PPM) Cetane Number Minimum 51 Cold Filter Plugging Point (CFPP) -5C (summer grade), -15C (winter grade) Distillation 95% Recovered Maximum 360C Total Aromatics Content Maximum 11% Polycyclic Aromatics Content Maximum 8% Ash Content Maximum 0.01% by mass Water Content Maximum 200 mg/kg Total Contamination Maximum 24 mg/kg Lubricity, corrected wear scar diameter @ 60C Maximum 460 micrometers Copper Strip Corrosion (3h @ 50C) Class 1 Oxidation Stability @ 110C Minimum 20 hours FAME (Fatty Acid Methyl Ester) Content Maximum 7% by volume Carbon Residue (on 10% distillation residue) Maximum 0.3% HFRR (High-Frequency Reciprocating Rig) Wear Scar Maximum 460 microns

Property Specification Appearance Clear and Bright Density @ 15C 820 - 845 kg/m Viscosity @ 40C 2.0 - 4.5 mm/s (cSt) Flash Point Minimum 55C Sulfur Content Maximum 10 mg/kg (10 PPM) Cetane Number Minimum 51 Cold Filter Plugging Point (CFPP) -5C (summer grade), -15C (winter grade) Distillation 95% Recovered Maximum 360C Total Aromatics Content Maximum 11% Polycyclic Aromatics Content Maximum 8% Ash Content Maximum 0.01% by mass Water Content Maximum 200 mg/kg Total Contamination Maximum 24 mg/kg Lubricity, corrected wear scar diameter @ 60�°C Maximum 460 micro Copper Strip Corrosion (3h @ 50�°C) Class 1 Oxidation Stability @ 110�°C Minimum 20 hour FAME (Fatty Acid Methyl Ester) Content Maximum 7% by volume Carbon Residue (on 10% distillation residue) Maximum 0.3% HFRR (High-Frequency Reciprocating Rig) Wear Scar Maximum 460 mi

Property Unit Specification Cetane Number Minimum 51 Density at 15C kgm 820 845 Viscosity at 40C mms 20 45 Flash Point C Minimum 55 Cold Filter Plugging Point CFPP C Varies by climate zone Sulfur Content mgkg Maximum 10 Polycyclic Aromatic Hydrocarbons PAH by mass Maximum 8 Lubricity HFRR m Maximum 460 Distillation Recovery at 250C by volume Minimum 85 Distillation Recovery at 350C by volume Maximum 95 Ash Content by mass Maximum 001 Water Content mgkg Maximum 200

EN590 10 PPM Diesel is in high demand. We are direct mandate. We can supply in large quantity. Procedure for EN590 10 PPM is set by refinery. Please only inquire if you require serious, professional service and guarantee that you will receive EN590 10PPM fuel. NOTE: Refinery procedure is set for 100% success rate of buyer receiving the fuel. We offer CIF and FOB procedure. As market changes everyday, pricing of fuel may be subject to change. We can guarantee you the most competitive pricing for fuel, only if you follow direct refinery procedure. Please note in an international community where different language communication style and cultures can block business transactions. Let's work together to negotiate a successful transaction for you, the buyer.

DIESEL FUEL OIL D6 Minimum Quantity : 25,000,000 Gallon Maximum Qty 50,000,000 Gallon FOB Price : $2.00 USD / Gallon CIF Price : $3.00 USD / Gallon Commission : $1 USD Seller side, $1 USD Buyer side Delivery Terms: CIF / FOB Shipment. Payment Term: MT103 TT Wire Transfer. Quality : Q&Q test report will be conducted at the loading port by SGS equivalent at the expense of the seller. Products Origin: KAZAKHSTAN. Contract Term: 12 Months minimum after first successful trial (with rolls and extensions). PORT OF LOADING: JURONG PORT, SINGAPORE, AKTAU, PAVLODAR, KURYK, FUJAIRAH, VLADIVOSTOK, ROTTERDAM AND HOUSTON PORT. Contact us for detail procedure of CIF/FOB/TTV/TTO.

PRODUCTS PRICES AND LIFT ABLE QUANTITIES (FOB) - VOPAK TERMINALS. DIESEL OIL EN590 -10PPM LIFT ABLE QUANTITY FOB: Minimum Quantity: 40,000 Metric Tons per Month, Maximum Quantity: 300,000 Metric Tons Lift able. FOB Price: Gross USD $560.00MT / Net USD $540.00MT, FOB Rotterdam |Jurong & Fujairah Ports Commissions: $20, Seller side - $ 10.00 per Metric Tons / Buyer side - $ 10.00 per Metric Tons, Payable by Seller FOB TRANSACTION PROCEDURE FOB VOPAK TERMINALS DIP & PAY 1. Buyer Sends CIS and ICPO of their purchasing product to Seller for verification and processing: 2. Seller submit buyer files to Vopak Terminal Manager. 3. Vopak Terminal Manager send Vopak Agreement to buyer through Seller. Buyer within 48 hours sign and return the Vopak Agreement through Seller. 4. Buyer finalizes the Vopak Terminal Protocols cost through the supplier with the Vopak Terminal Manager, and obtain the following and submit the same to Seller as listed below. o VopakBarcode o VopakRegistrationinformation. o VopakReferenceCode. 4b. Format of Authorization Form to accompany the information LETTER OF AUTHORIZATION: We, (Buyer Name), with registered Office, at (Address). represented by Mr. ________________, with Passport number ________________. Owner of Barcode code at Royal Vopak Rotterdam, with contract reference number: _____________. NB: Immediately buyer complete the above process and receive Vopak Reference through Vopak Terminal Manager, buyer will have access to communicate directly to Vopak Management with the help of the Reference code assigned to the buyer. 5. Seller, sends Cl for Buyer's endorsement. Buyer signs the CI and retune back within 24 hours of receiving alongside side with Sign Letter of Authorization. 6. Seller issue Buyer Full POP documents along with fresh SGS (Not less than 48 hours, one-time official confirmation mail from SGS official). Fresh SGS Report or Saybolt (Not later than 24 72 hours) Tank Storage Receipt (TSR) with GPS Coordinates of where the Tanks/Vessel are located. Injection Report Agreement Authorization to Sell Authorization to verify the product in the tank (ATV) Country Certificate of Origin Approved Dip Test Authorization (DTA Availability of Product, Commitment to Supply, 7. After verification of full POP by buyer, injection begins. 8. Upon completing the Injection, seller transfers title to buyer. 9. Buyer makes full payment after via MT103.

KAZAKHSTAN EUROPEAN DIESEL EN590 (ULSD 10PPM) Quantity: 50,000-500,000 Metric Tons. CIF Price: Gross $580USD per Metric Ton / Net $570USD per Metric Ton FOB Price: Gross $570USD per Metric Ton / Net $566USD per Metric Ton TERMS & OPERATIONAL PROCEDURE: C.I.F 1. Buyer issues ICPO must be with buyer company letterhead and buyer banking information. 2. Seller issues Draft Contract (open for any amendments) to Buyer. Buyer signs, seals and returns the Draft Contract to Seller for final endorsement with letter of acceptance. Seller gives Partial proof of products. (A) Certificate of Origin (B) Product quality passport (Analysis test Report) By KAZAKHSTAN standard gost R (C) Commercial Invoice (D) Statement of availability of product 3. Within 7 banking days, Buyers bank sends Transferable SBLC, DLC, BG via MT760/MT700 Letter Credit according to sellers fiduciary bank verbiage to seller nominated fiduciary offshore bank account for first month shipment, should buyer fail to issue payment instrument within 7 banking days, buyer will make cash deposit of $ 400,000 by TT wire transfer for security guarantee to enable seller charter vessel and commence shipment, and this payment will be deducted from the total cost of product after inspection at discharge port, Sellers Bank issues Full POP Documents to the Buyers Bank alongside with the 2% Performance Bond (PB) a) Copy of license to export, issued by the department of the Ministry of Energy, KAZAKHSTAN Federation. b) Copy of Approval to Export, issued by the Ministry of Justice, KAZAKHSTAN Federation. c) Copy of statement of availability of the product. d) Copy of the refinery commitment to produce the product. e) Copy of Transnet contract to transport the product to the loading port. f) Copy of the port storage agreement. g) Copy of the charter party agreement to transport the product to discharge port h) Copy of Vessel Questionnaire 88. i) Copy of Bill of Lading. j) SGS Report at loading port. k) Dip test Authorization (DTA) & ATB l) NOR /ETA m) Certificate of Ownership Transfer n) Allocation Transaction Passport Code Certificate (ATPCC) by Ministry of Energy Shipment commences as per signed contract delivery schedule and the shipment should arrive at Buyers discharge port within 5- 25 days. The SGS inspection will be borne by the Seller at the loading seaport and Buyer at the unloading seaport. 4. Buyer releases payment to Seller by TT/MT103 upon receipt of the shipping documents and confirmation of the Q & Q by SGS/CIQ at destination port. 5. Seller pays commission within 48 hours by swift MT103 to all intermediaries as signed NCNDA/IMPFA.

PRODUCT ORIGIN: GEORGIA ,UAE,EUROPE, SINGAPORE ETC. NO-SANCTIONED PRODUCT: 10PPM DIESEL FUEL EN 590 Quantity: 5,000 Metric Tons - 50,000 Metric Tons Trial lift Quantity: 100,000 Metric Tons 200,000 Metric Tons per Month x 12 Months Price FOB : USD $380 Gross / USD $370 Net per Metric Tons Price CIF/ASWP : USD $440 Gross / USD $430 Net per Metric Tons