VZEN IND IV (also known as Light oil, LVFO or Low Viscosity Oil) is a fraction obtained from petroleum distillation. VZEN IND IV is a light viscosity dark colour liquid fuel that is burned in a furnace, heater or boiler for generation of heat or used in an engine for the generation of power. It can be used in place of Light Diesel Oil (LDO) as it has higher GCV & Low Cost. VZEN IND IV is the most economical fuel available for industrial application. It is the most used fuel oil for industrial heating applications in Metal & Steel industry, Engineering and Leather industry. Our range of all products is widely appreciated by our clients.
VZEN IND III is a blend of distillate fuel with a additives. VZEN IND III is commonly used as a fuel in industrial and commercial applications. It is a low-sulphur distillate fuel oil derived from hydrocarbon oil through a distillation process and filtered to meet the need of Industrial boilers and give best performance. It has high Gross Calorific value. It is recommended for all types of Industrial Heating application. VZEN IND III is low viscosity oil, high flash point and low pour point to give best performance throughout the year. It is pure petroleum-based oil and has very low carbon low Sulphur and low ash content. Our range of all products is widely appreciated by our clients.
Description: VZEN IND I is a premium quality Biodiesel Oil. VZEN IND I is a renewable, clean-burning fuel oil free from Sulphur and best fuel for the environment. VZEN IND I Oils are made from a diverse mix of feed stocks including recycled cooking oil, soybean oil and animal fats. This non-petroleum-based product can be used as diesel fuel, textile lubricant and industrial heating oil fuel. VZEN IND I is environmentally friendly and biodegradable Oil.Our range of all products is widely appreciated by our clients.
D2 is a refinery abbreviation for Gasoil. It is the second distillate from the crude oil, and can be used without reformers and additives Specifications for Gasoil D2 L-0.02/62 / GOST 305-82 COMPONENT UNIT MIN MAX Density at 20C Kg / m�³ 0.870 Colour 2.0 Flash point, PMCC Deg C (�°C) 57 62 Kinematic viscosity at 20C C ST 3.0 6.0 Pour point Deg C (�°C) (*) -10.0 Cloud point Deg C (�°C) (*) -5.0 Mercaptan sulphur 0.01 Acidity, mg / 1000 cm�³ 5 Iodine number g/100g 6 Ash %wt 0.01 Total Sulphur %wt 0.02 0.05 Copper corrosion 3hrsat50 deg C (typical) 1 A CCR on 10% Residues %wt 0.02 Cetane index 45 Distillation range : - 50% Recovered Volume deg C (�°C) 280 - 90% Recovered Volume deg C (�°C 360 Bacteria MBC Fibre / it 500 - Bacteria CFU Fibre / it 1000 (*) Summer from March to October (PP 5.0 degrees C) Summer from March to October (CP 0.0 degrees C) Winter from November to February (PP 10.0 degrees C) Winter from November to February (CP 5.0 degrees C)
Product origin - Kazakhstan/Oman/Qatar
FOB Houston, Rotterdam, Jurong available CIF ASWP available
EN 590 is the current standard for all automotive diesel fuel sold in the European Union member states and other European countries. This grade of fuel is also called ultra-low sulphur diesel (ULSD) Parameter Unit Minimum Maximum Typical Appearance Clear & bright, Cherry Red, Free from visible sediment. Pass Density at 15°C kg/m³ 0.820 0.860 Kinematic viscosity at 40°C mm²/s 1.5 5.5 3.0 Carbon residue (Ramsbottom on 10% residue) % (m/m) 0.30 0.10 Distillation recovery at 250°C % (v/v) 65 42 Distillation recovery at 350C % (v/v) 85 92 Flash point (PMCC) °C 56 >62 Water content mg/kg 200
* Quantity MIN 100,000MT x 12 months * Origin: Russian and other country, we have 10 countries factory suppliers. Specifications: Standard Export Quality. * Payment: By MT103/760 * Price/Commissions: The price we can discuss. Final price to Buyer is the Gross, including all commissions. Commissions * Payment is then made by Seller, who carries out all commissions transfers. *Contract: 12 Months with possible rollovers. * Inspection: SGS or similar * CIF DLC or SBLC PROCEDURE 1. Buyer issues ICPO, company registration, I.D. and Top World Bank redacted Bank Statement or equivalent 2. Seller issues Sales and Purchase Agreement (SPA). 3. Buyer signs and returns SPA. 4. Buyer's Bank issues a RWA letter to guarantee to issue an instrument on behalf of the Buyer within three working days after receiving the following PPOP. 5. Seller issues PPOP to Buyer including the following: A. Copy of license to export issued by the Department of the Ministry of Energy. B. Copy of approval to export issued by the Department of Ministry of Justice. C. Copy of statement of availability of the product. D. Copy of the refinery commitment to produce the product. E. Copy of contract to transport the product to port F. Copy of the port storage agreement G. Copy of the charter party agreements to transport the product to the discharge port. H. Tank Storage Receipt (TSR) I. Q & Q by Current SGS report. 6. Buyer's bank issues operative Letter of Credit DLC MT 700 or SBLC MT-760 to Seller's fiduciary Bank account. 7. Seller issues 2% Performance Bond to Buyers bank. 8. Shipment Commences 9. On getting to Buyer's port of discharge, the Buyer's inspection team board the vessel and perform an inspection. Buyer sends SGS report to Seller. 10. Seller provides shipping document and a master commercial invoice to Buyer, within 3 banking days, Buyer makes the payment in full via MT 103/TT to Seller's Bank account.
We are the serious supplier. I have 10 Millions MTs available in Rotterdarm port everymonth now. The supplier is IPG PLATTS LTD. If you are interested in it, we can discuss more details. We can supply the transport service to you. The Customer must exactly observe our procedure process. If you can, please contact me directly by Whatsapp: +4917672341485. * Quantity MIN 8 Million MT per months * Origin: Netherlands, United Arab Emirates Specifications: Standard Export Quality. * Payment: By MT103/760 * Price/Commissions: The price we can discuss. Final price to Buyer is the Gross, including all commissions. Commissions * Payment is then made by Seller, who carries out all commissions transfers. *Contract: 12 Months or more with possible rollovers. * Inspection: SGS or similar
EN590 and JET-A1 are readily available at Rotterdam Port, with CIF/FOB options and SGS/Intertek certification. Contact us now to arrange a seamless supply!
Ultra-low sulphur EN590 10PPM diesel in large volumes on a long-term basis. Origin: Russian, Oman or Moroccan Delivery terms: FOB Primorsk/Novorossiysk/Taman. CIF ASWP. Volume: up to 300,000 mt/m. Price: $90 discount from Platts European Marketscan on FOB incoterms basis. CIF ASWP pricing addressed individually as per buyer's request. Payment terms: DLC.
We have got Diesel EN590-10ppm available for immediate lift: Please contact me for detailed information:
The Low shrinkage oil is a distillate fuel manufactured from a selected crude oil; this Diesel Fuel contains 10 parts per million of sulfur (
2. PRODUCT NAME: DIESEL FUEL EN590 EURO 5 - 6 (ULSD 10PPM) ORIGIN PEMEX Liftable Quantity: Minimum 50,000 MT Maximum 100,000 MT Trial + Contract PRICE PLATTS - $825.4990 -4 = 821.499 NET PER MT Platt Code: AATGY00
3. Product Name: DIESEL FUEL EN590 USLD 50 PPM 500 PPM ORIGIN PEMEX Liftable Quantity: Minimum 50,000 MT â?? Maximum 200,000 MT Trial + Contract PRICE PLATTS - $ 260.750 -4= $256.75 PER MT Platt Code: AATGY00 Value can be changed at any TIME
4. PRODUCT NAME: DIESEL D6 VIRGIN LOW POUR FUEL OIL ORIGIN PEMEX Liftable Quantity: Minimum 100,000,000 GLN Maximum 500,000,000 GLN Trial + Contract Price Platts - $1.9992 -5 = $1.9987 per Gal Platt Code: PUAAI00
5. Product Name: DIESEL D2 GASOIL GOST 305-2013 ORIGIN PEMEX Liftable Quantity: Minimum 50,000 MT Maximum 200,000 MT Trial + Contract price platts - $ 252.85 -5 = $247.85 PER MT Platt Code: AAXFD00
EN590 10PPM /50PPM , QUANTITY : MINIMUM 50.000 MT trial Maximum SHIPMENT : 500.000 MT Monthly CIF PRICE : US$ 580 gross/ US$ 570 net PER MT ( HOUSTON/ROTTERDAM/JURONG/FUJAIRAH) Commission : US$ 10
Hi, We are manufacturer of Biodiesel of EN 14214 Grade, looking for long term contract with Buyers
Diesel EN590 Buy Offer Details Available products: DIESEL EN590 10PPM and BITUMEN. Diesel EN590 10 PPM with some of the specifications; - Density at 15°C : 820 kg/m³ - Flash point : minimum 62°C - Cetane Number: minimum 51 - Sulfur content : maximum 10 ppm - Distillation range : 85% distilled at 360-370 °C - Cold filter plugging point : maximum -5°C Product Origin : Kazakhstan Delivery : FOB or CIF at the best prices. Payment : DIP & PAY No upfront needed Please get in touch with your contact details for our comprehensive SCO with procedures. MOQ : 25,000 MT
