Model No SJ186FE (Electric starter)
Type Single-cylinder,vertical,air-cooled,4-stroke,direct injection
Bore Stroke (mm) 86 70
Displacement(cc) 406
Compression ratio 19:01
Rated power/ Rated speed (Hp/r/min) 7.7/3000 8.60/3600
Max power/ Max speed (Hp/r/min) 8.6/3000 10.0/3600
Lubricating system Pressure splashed
Starting system Electric starter
Rotation direction(face to the output axle) Clockwise
Fuel type 0# �-10# �-20# diesel
Fuel tank capacity (L)/(us.gal) 5.5/1.45
Fuel consumption/related rotation speed (g/hp.h/r/min) 206/3000 215/3600
Lube oil type CD grade or SAE 10W-30, 15W-40,40CC
Lube oil capacity (L)/(us.gal) 1.65/0.44
Starting motor capacity (V �kW) 12V 0.8kW
Charging generator capacity (V �A) 12V 3A
Battery capacity (V �Ah) Above 12V 20Ah
Package dimensionL W Hmm 525X470X565
Net weight(kg)¤51.5
C.A.G’s 163cc, OHV, air-cooled gasoline engine delivers a max of 5.5HP and 9.5N.m/2500rpm torque to the power sources. This OHV gasoline engine is an easy-to-install solution for small engine needs. Dual ball bearing forged-steel crankshafts are mounted, making this 5.5hp engine an ideal replacement for most standard engine configurations. The built in oil alarm system means the 5.5hp gasoline engine will automatically shut down when it runs low on oil, preventing engine damage or failure. This C.A.G general purpose engine is ideal for generators, pressure washers, water pumps, tillers, cultivators, and other outdoor power equipment.
A&S Construction Machinery Co., Ltd. supplies all types of harnesses.
All the brands of harnesses we can provide:
CAT harnesses, KOMATSU harnesses, JOHN DEERE harnesses, SANY harnesses, XCMG harnesses, VOLVO harnesses, HITACHI harnesses, SUMITOMO harnesses, LIEBHERR harnesses, DOOSAN harnesses, CASE harnesses, BOBCAT harnesses, KUBOTA harnesses, YANMAR harnesses, HYUNDAI harnesses, DAEWOO harnesses, etc.
For other parts of the brands above we can also provide cylinder liners, crankshafts, oil pumps, solenoid valves, solenoid coils, fuel injectors, batteries, radiators, compressors, gaskets and seals, mufflers, manifolds, turbochargers, hydraulic pumps, hydraulic motors, hydraulic valves, hydraulic couplers, bearings, bearing seats, gears, pulley, sprocket, coupling, drive shaft assembly, brakes, clutches, drive chains, actuators, alternators, cables, controllers, distributors, fuses and relays, sensors, switches, gearcases, filters, counterweights, heater and A/C accessories, belts, etc.
A&S Construction Machinery Co., Ltd. supplies all types of drive motor carriers.
All the brands of drive motor carriers we can provide:
CAT drive motor carriers, KOMATSU drive motor carriers, JOHN DEERE drive motor carriers, SANY drive motor carriers, XCMG drive motor carriers, VOLVO drive motor carriers, HITACHI drive motor carriers, SUMITOMO drive motor carriers, LIEBHERR drive motor carriers, DOOSAN drive motor carriers, CASE drive motor carriers, BOBCAT drive motor carriers, KUBOTA drive motor carriers, YANMAR drive motor carriers, HYUNDAI drive motor carriers, DAEWOO drive motor carriers, etc.
For other parts of the brands above we can also provide cylinder liners, crankshafts, oil pumps, solenoid valves, solenoid coils, fuel injectors, batteries, radiators, compressors, gaskets and seals, mufflers, manifolds, turbochargers, hydraulic pumps, hydraulic motors, hydraulic valves, hydraulic couplers, bearings, reducers, bearing seats, gears, pulley, sprocket, coupling, drive shaft assembly, brakes, clutches, drive chains, actuators, alternators, cables, controllers, distributors, fuses and relays, harnesses, sensors, switches, gearcases, filters, counterweights, heater and A/C accessories, belts, etc.
A&S Construction Machinery Co., Ltd. supplies all types of Engines.
All the brands of Engines we can provide:
CAT Engines, KOMATSU Engines, JOHN DEERE Engines, SANY Engines, XCMG Engines, VOLVO Engines, HITACHI Engines, SUMITOMO Engines, LIEBHERR Engines, DOOSAN Engines, CASE Engines, BOBCAT Engines, KUBOTA Engines, YANMAR Engines, HYUNDAI Engines, DAEWOO Engines, etc.
For other parts of the brands above we can also provide cylinder liners, crankshafts, oil pumps, solenoid valves, solenoid coils, fuel injectors, batteries, radiators, compressors, gaskets and seals, mufflers, manifolds, turbochargers, hydraulic pumps, hydraulic motors, hydraulic valves, hydraulic couplers, bearings, reducers, bearing seats, gears, pulley, sprocket, coupling, drive shaft assembly, brakes, clutches, drive chains, actuators, alternators, cables, controllers, distributors, fuses and relays, harnesses, sensors, switches, gearcases, filters, counterweights, heater and A/C accessories, belts, etc.
Specifications
Rated Output
419 kW 57 mhp
Rated Speed
3000 rpm
Displacement
219 L 134 cu in
No of cylinders
4 cylinders
Cylinder Bore x Stroke
88 mm x 90 mm 346 in x 354 in
Combustion system
Direct Injection Bosch Common Rail System
Aspiration
Natural
Alternator
12V 125A
Dry weight without gear
220 kg 485 lbs
Dimensions
870 mm x 589 mm x 627 mm
Controls
Mechanical optional VC10 system
Certifications
RCD 2 EPA Tier 3 EPA Tier 3C BSO II EMC SOLAS
NOTE
1 kW 13596 mhp 134102 bhp
Fuel condition density at 15C 0842 gcm
Technical data is according to ISO 8665 ISO 3046
Fuel temperature 40C at the inlet of the fuel injection pump ISO 8665
Length includes KM35P marine gear
Dimensions may vary with other gearselbow
Standard Engine Package
Exhaust mixing elbow Ltype
Alternator 12V 125A
B25 panel
Flexible mounts
Mechanical throttle sensor
Fuel prefilter with water separator
Fresh water expansion tank
Belt safety cover
Optional Accessories
Highriser mixing elbow instead of Lelbow
Secondary alternator 12V 125A or 24V 60A
C35 panel
Extension harness 3m 5m 10m
Second station
TFX Sidemount control head
VC10 Vessel Control System
NMEA2000 Engine monitoring system
Semi 2pole
SOLAS including Certificate factory fit only
Hot water kit with cocks
Extension saildrive leg 75 mm
Propeller cone nut kit SD60
Onboard spare parts kit
Specifications
Rated Output
588 kW 80 mhp
Rated Speed
3200 rpm
Displacement
2 L 122 cu in
No of cylinders
4 cylinders
Cylinder Bore x Stroke
84 mm x 90 mm 331 in x 354 in
Combustion system
Direct Injection Bosch Common Rail System
Aspiration
Turbocharged Intercooled
Alternator
12V 125A
Dry weight without gear
229 kg 505 lbs
Dimensions
909 mm x 613 mm x 675 mm
Controls
Mechanical optional VC10 system
Certifications
RCD 2 EPA Tier 3 EPA Tier 3C BSO II EMC SOLAS
NOTE
1 kW 13596 mhp 134102 bhp
Fuel condition density at 15C 0842 gcm
Technical data is according to ISO 8665 ISO 3046
Fuel temperature 40C at the inlet of the fuel injection pump ISO 8665
Length includes KM4A2 marine gear
Dimensions may vary with other gearselbow
Standard Engine Package
Exhaust mixing elbow Ltype
Alternator 12V 125A
Seawater pump rear mounted
B25 panel
Flexible mounts
Mechanical throttle sensor
Fuel prefilter with water separator
Fresh water expansion tank
Belt safety cover
Optional Accessories
Highriser mixing elbow instead of Lelbow
Secondary alternator 12V 125A or 24V 60A
Seawater pump front mounted
C35 panel
Extension harness 3m 5m 10m
Second station
Sidemount control head
VC10 Vessel Control System
NMEA2000 Engine monitoring system
Semi 2pole
SOLAS including Certificate factory fit only
Opposite dipstick
Hot water kit with cocks
Extension saildrive leg 75 mm
Propeller cone nut kit SD60
Onboard spare parts kit
Specifications
Rated Output
80.9 kW / 110 mhp
Rated Speed
3200 rpm
Displacement
1.995 L / 121.7 cu. in
No. of cylinders
4 cylinders
Cylinder Bore x Stroke
84 mm x 90 mm / 3.31 in x 3.54 in
Combustion system
Direct Injection, Bosch Distributor Type VE Pump
Aspiration
Turbocharged & Intercooled
Alternator
12V - 125A
Dry weight without gear
217 kg / 478 lbs
Dimensions
933 mm x 661 mm x 659 mm
Controls
Mechanical
Certifications
RCD 1 EPA Tier 2 BSO II EMC SOLAS
NOTE:
1 kW = 1.3596 mhp = 1.34102 bhp
Fuel condition: density at 15 C = 0.842 g/cm
Technical data is according to (ISO 8665) / (ISO 3046)
Fuel temperature 40 C at the inlet of the fuel injection pump (ISO 8665)
Length includes KM4A2 marine gear
(Dimensions may vary with other gears/elbow)
Standard Engine Package
Exhaust mixing elbow [L-type]
Alternator 12V 125A
B20 panel
Flexible mounts
Expansion tank for fresh water cooling system
Electric stop solenoid
Optional Accessories
High-riser mixing elbow [instead of L-elbow]
Secondary alternator 12V â 130A or 24V 75A including smart regulator
C30 panel
Extension wire harness [4m, 6m, 10m]
Dual harness [for 2nd station]
TFX Sidemount control head
SOLAS including Certificate [factory fit only]
Hot water kit with cocks
Extension saildrive leg [75 mm]
Propeller cone nut kit SD60
Air heater [glow]
Trolling valve [only for KMH4A]
On-board spare parts kit
