Specifications Place of origin: Zhejiang, china (mainland) Brand name: Safesave Model number: Sezc-400 Type: Moulded case Poles number: 3p, 4p Color: Black Current: 250-400 Certification: Ccc/ce Rated voltage: 690v Rated frequency: 50/60 Standard: Iec947-1, -2, -4, -5.1 Mechanical life: 8000 times
Specifications Place of origin: Zhejiang, china (mainland) Brand name: Safesave Model number: Cjx2-150 Electricity type: Ac, ac Number of pole: Other Phase: Other Main circuit rating voltage: 1000v, 12-660v Main circuit rating current: 800a Standard: Iec60947-4-1 Rated voltage (v): 380v 480v 680v ac Frequency: 50/60
It brings home owner perfect solar storage solution by acting as a core controller among pv system, grid and battery. It is not only applicable to exist grid-tied or off-grid pv system retrofitting but also a smart substitution to ups. Features: saving electricity cost by automatically power management retrofitting to existing grid-tied or off-grid pv system easy installation and no need to change much original layout 5 years warranty and good after-sales service
Measure single phase kwh 5(30)a, 110v/220v Small volume, 6 digis, 35mm din . General Adl10 has a compact design din rail mounting kwh meter, and it is very easy to install. It is suitable to the electrical energy statistic and management of internal of factories, buildings, schools, hospitals etc.. Order example Example: Type: adl10-e Network: single phase Mode of wiring: directly Un: ac 220v In: 5 (30) a -
Akh-0.66/k split current transformer L product feature Akh-0.66k series split current transformers are mainly used in reconstructing projects of urban and rural power grids. They can be mounted easily without removal of primary bus. They also can be operated with electricity, which prevents the normal utilization of electricity. Thus, they save the manpower, material resources and financial resources and improve the efficiency of users.< this series match with relay protection, measuring and metering equipment. -
Bidirectional energy storage inverter, helps to achieve home energy storage solution by Working as a smart core controller among normal grid-tied inverter, power grid and battery to manage energy storage and discharge automatically. It helps homeowners to achieve the purpose of making full use of renewable energy and reduce electricity bill. Ï�¬ during daytime with enough sunshine, it gets power from pv panels through existed on -grid Inverter (dc to ac). However, there are two separate output channels from inverter for important Loads and normal loads, respectively. Ï�¬ when power from pv is sufficient to all loads, extra power will be charged to battery. When battery Is full, surplus energy will be supplied to grid if you want. Ï�¬ if the power generated from pv is not sufficient to drive the loads, grid supplies complementary Power to drive the loads and even charge the battery (ac to dc) automatically. Ï�¬ in the event of power grid outage while no pv power supply, inverter controls the battery to Discharge power as back up to keep important load continuously working.
CE certificated, RoHS compliant. Automatic Constant Feed Speed Control: Automatic output voltage adjustment in real-time to ensure constant preset feed speed regardless of weight change of the workpieces. Automatic Frequency Adjustment: Automatic output frequency adjustment in real-time to make sure the load is always working at its resonant frequency. Automatic Resonant Frequency Search: Search out and output the resonant frequency of the load. other related parameters are also set automatically Counting: Count the number of the workpieces. The controller will slow down or stop when counting up to the preset value. (available on SDVC34MRJ) Rs485 Communication: All parameters of the controller can be adjusted via R485. Automatic Switch Sensor Type Recognition: The controller can recognize and adapt to both PNP and NPN-type switch sensors Sync Output: Sync the output waveform of the slave controller with that of the master controller to the same frequency and phase to avoid the beat effect Overvoltage Protection: If the input voltage is too high, the power supply of the controller will be shut down automatically to protect itself. Digital Overheat Protection: If the internal temperature of the controller gets too high, the controller will stop its output to protect itself. Overcurrent Protection: If output current exceeds its rated value the controller will stop its output to protect itself and the load. Restorable Short Circuit Protection: If the output of the controller is short-circuited, the controller will shut down its output to protect itself and the load. But the fuse inside will not be blown. So when there is no short circuit at the output side, the controller will work again after power is on.
Frequency Adjustment: The output frequency of the controller can be manually adjusted to the resonant frequency of the vibratory feeder to get smooth, quiet, and energy saving feed effect Automatic High Precision Voltage Requlation: The internal digital voltage regulation circuit can eliminate feed sped variation caused by mains voltage fluctuation. Time Adjustable Soft Start: The controller will increase output voltage from 0 to the preset value when powered on to avoid a sudden shake. soft start time can be digitally preset Switch Sensor ON/OFF Control NPN switch sensor or PLc can be connected to turn on/off the controller. Photoelectric Sensor ON/OFF Control: The cuH inteligent Photoelectric sensor can be connected to turn on/off the controller.Remote speed Control. The output voltage of the controller can be adjusted remotely by an external potentiometer, a Plc, or a 1-5v DC signal. DC Control Output: The controller can output low voltage DC power asociated with ON/0ff Control of the controller to drive a solenoid or other external devices.Keypad Lock: Lock all buttons on the keypad to prevent misoperation by pressing the ON/Off button and hold
1. Solar panels' output voltage are less than 60VDC, which decreases the risk of an electrical fire. 2. One panel would match one MPPT, increasing 5-15% power in production compared to string inverters. 3. Keeping each panel working individually avoids the impact of partial shadows on the entire solar system. 4. Independently tracking each of the solar panels' production makes it easy to identify each solar panel's performance. 5. Lightweight and compact with plug-and-play connectors, it is easy to install. 6. Monitor the running station anytime, anywhere, using the app. 7. The microinverter housing is designed for outdoor installation and complies with the IP67 protection rating.
1. Solar panels' output voltage are less than 60VDC, which decreases the risk of an electrical fire. 2. One panel would match one MPPT, increasing 5-15% power in production compared to string inverters. 3. Keeping each panel to work individually avoids the impact of partial shadows on the entire solar system. 4. Independently tracking each of the solar panels' production makes it easy to identify each solar panel's performance. 5. Flexible application allows it to switch to off-grid mode to supply AC power to home devices. 6. Lightweight and compact with plug-and-play connectors, it is easy to install. Monitor the running station anytime, anywhere using the app.
hybrid inverter on/off grid 4.2KW, 6.2KW, 8.2KW, 10.6KW
This series of power supplies generate high voltage pure sine wave output at variable amplitude & frequency and mainly find application in plasma research. Output Voltage Range: Upto 20kV peak to peak Output Power Range: Upto 1kW peak to peak
GREENIVA Single MPPT 2.0KW 8 Years Warranty
AC3P Connector II Product Specifications: Insulation material:PPE/PA; Safety degree:II; Rated current:Max.50A(10sqmm); Flame class:UL94-V0; Rated voltage:500V AC; Suitable cable OD Max.:21mm ; Test voltage:4kV; Ambient temperature range:-40~+85(IEC); Typical contact resistance:=1000; Contaction diameter/number of contact:4.0x3; Standard:EN 61984. AC5P Connector II Product Specifications: Insulation material:PPE/PA; Safety degree:II; Rated current:Max.50A(10sqmm); Flame class:UL94-V0; Rated voltage:500V AC; Suitable cable OD Max.:21mm ; Test voltage:4kV; Ambient temperature range:-40~+85(IEC); Typical contact resistance:=1000; Contaction diameter/number of contact:4.0x5; Standard:EN 61984.
Solar Batteries,Gel Batteries,AGM Batteries,Nickel cadmium Batteries,Lithium batteries, Battery chargers, UPS,Static Frequency Converters, Rotary Frequency Converters, DC-DC Converters, Stabilizers, Solar Panel Clean Robots, Solar Inverters, 110Vdc Electricity Inverters, 125VDC Industrial UPS, POE DC UPS.
Solar Batteries,Gel Batteries,AGM Batteries,Nickel cadmium Batteries,Lithium batteries, Battery chargers, UPS,Static Frequency Converters, Rotary Frequency Converters, DC-DC Converters, Stabilizers, Solar Panel Clean Robots, Solar Inverters, 110Vdc Electricity Inverters, 125VDC Industrial UPS, POE DC UPS.
Inverters On Grid And Off Grid.
Ac and dc switching power supply adapter.
Super mini dc and ac inverter.
Super mini dc and ac inverter.
