TENTEK Floor-Standing & Wall Mounted LiFePO4 Battery 1. IP65 Protection:  High standard design requirements suitable for  both indoor and outdoor installation. 2. The Flexible Installation: Include floor-standing and wall-mountable options, and both side output make the installing more flexible. 3. Plug & Play Easy Extend: Adopt quick connector, which saves time during installation. Simply put in the plugs and quickly paralleled up to 8 units. 4. Wide Range of Applications: It has been proven to be compatible with over 20 storage inverters. 5. The Shunt Trip Function: Ensures that the system will not shut down even if any abnormalities in parallel operation. And the abnormality unit can be automatically cut off separately. 6. Boasts a Long Life: Car grade LFP cells, which has the longest lifespan and highest safety standards. 7. The Modular Design: The BMS system is equipped with a virtual host, which runs independently when connected in parallel. It keeps whole system still on working when any abnormality during the parallel connection with the ability to parallel up to 8 pieces.
TETNTEK Portable Stacked LiFePO4 Battery 1. Much Safety: Using the solid electrolyte in solid-state batteries is non-flammable, hence they are less prone to catch fire. The solid electrolyte is more stable and less prone to overheating. 2. Longer Cycle Life: Having a longer cycle life, hence it can withstand a greater number of charge-discharge cycles which can improve the overall lifespan of the battery. 3. Faster Charging: Having faster charging capabilities. The absence of a liquid electrolyte reduces the risk of side reactions and allows for faster ion transport within the battery, leading to quicker charging times. 4. Reduced Environmental Impact: Solid-state batteries may use less toxic or more abundant materials, reducing the environmental impact of battery production and disposal. 5. Wide Operating Temperature Range: Solid-state batteries are suitable for using in extreme conditions, such as very high or low temperatures.
1. Solar panels' output voltage are less than 60VDC, which decreases the risk of an electrical fire. 2. One panel would match one MPPT, increasing 5-15% power in production compared to string inverters. 3. Keeping each panel working individually avoids the impact of partial shadows on the entire solar system. 4. Independently tracking each of the solar panels' production makes it easy to identify each solar panel's performance. 5. Lightweight and compact with plug-and-play connectors, it is easy to install. 6. Monitor the running station anytime, anywhere, using the app. 7. The microinverter housing is designed for outdoor installation and complies with the IP67 protection rating.
1. Solar panels' output voltage are less than 60VDC, which decreases the risk of an electrical fire. 2. One panel would match one MPPT, increasing 5-15% power in production compared to string inverters. 3. Keeping each panel to work individually avoids the impact of partial shadows on the entire solar system. 4. Independently tracking each of the solar panels' production makes it easy to identify each solar panel's performance. 5. Flexible application allows it to switch to off-grid mode to supply AC power to home devices. 6. Lightweight and compact with plug-and-play connectors, it is easy to install. Monitor the running station anytime, anywhere using the app.
1. Compatible with more than 90% of brand microinverters, such as AP systems , Enphase , Hoymiles, etc. 2. 0-1600W microinverter output power automatically or manually adjustable 3. Zero feed-in grid (with energy monitor) 4. To charge and discharge simultaneously 5. Without limitation of battery type 6. APP real-time monitoring
Supplier: Led bulb, tube light, panel light, decoration light, wall light, steel wires, steel plate, stainless steel plate, twisted wire rods, galvanized wires, wire mesh, site fencing, mosquito mesh, thread rods, rebar, twisted rods, t bar, nuts and bolts, hardware, pvc pipes, upvc pipes, api pipes, melamine, mdf board, plywood, film faced, shuttering, packing, core veneer, face veneer, hdf molded door skin, door filler, tubular particle boards, pvc boards, wpc boards, doors, block board, hard board, gypsum board, canopy, carpet, flooring wooden, bamboo, laminated engineering, tiles, granite tiles, granite blocks, black galaxy, wash basin, water closets, washbasins, ss sinks, faucets, furniture, pvc edge bending, crew, locks, pvc seals, silicone cartridges, shower enclosures, shower door hinges, handles, knobs, brackets, slides, nails, solar panels, flexible solar panels, solar power station, battery, inverters, rechargeable fans, lights, spring, 3ply disposable face mask, oxygen concentrator ,
Services: Buying office, oem, components sourcing, value added services
Buyer: In shell pecan nut, macadamia nut
Our All in one system 32KWH LiFePO4 Lithium Battery with AC Charger and 12-15KW 120/240V Inverter for mobile vehicle application ESS including LiFePO4 Lithium Battery with BMS, off grid pure sine wave inverter, AC/DC charger. This product is composed of high quality lithium iron phosphate core (series-parallel connection) and advanced BMS management system. It adopts master-slave mode, which is convenient for monitoring and controlling the input and output system. The charging and discharging are independent, it can control the charging current of the AC charger and solar controller according to the battery temperature, voltage and SOC to better protect the battery cells from overcharging, overheating and discharging. It has high reliability and long life, products developed for applications such as solar energy storage, industrial and commercial energy storage, household energy storage, charging piles, data room and other applications. Product advantages: All-in-one design, high integration and space saving installation Using high-performance lithium iron phosphate cells, laser welding, good cell consistency, designed service life of more than 10 years Charging and discharging are controlled separately, which is convenient and reliable to control charging and discharging. The discharge port will not be disconnected when over-charging, and the charging port will not be disconnected when over-discharging, the system has good stability Master-slave mode, passive equalization, can manage the equalization resistance, can set the equalization start voltage difference, and monitor the equalization resistance temperature, more intelligent and safe, and reduce the impact of barrel effect on system energy storage BMS adopts NXP(USA) automotive-grade high-performance chips, with strong anti-interference, good reliability and wide temperature range System parameters can be set through the host computer, such as fan start/stop temperature, charger maximum current setting, charge and discharge current correction, SOC correction, with insulation leakage detection function to prevent oil leakage and short circuit of the cell Integrate Solar charge controller or AC charger optional, BMS communication control, more safe and reliable;
Basic Info. Model NO. LFP51.2-300 Electrolyte LiFePO4 Color White Usage Solar/ Marine/ Telecom / Electric Mobility Warranty 3 Years OEM/ODM Acceptable Package Carton and Pallet Lead Time 20-30 Days Dimension 720*260*580mm Transport Package Wooden Case Specification 120kg Trademark PUSTUN Origin China HS Code 8507600090 Production Capacity 5000 Product Description Product Description Factory Wholesale Deep Cycle 51.2V300ah Lithium Ion Batteries LiFePO4 Lithium iron phosphate battery is a kind of lithium ion battery that uses lithium iron phosphate (LiFePO4) as the positive electrode material and carbon as the negative electrode material. It has the advantages of high working voltage, high energy density, long cycle life, good safety performance, low self-discharge rate and no memory effect. Pustun lithium iron phosphate battery is your best power choice for energy storage system of solar street light. This LFP series battery is specifically designed for solar street light application, which has more than 10 years service life; LFP series batteries are the best choice for the durable, safe, environment-friendly energy solution and they can be customized according to your requirement, such as dimension, voltage, capacity of battery. With an increased lifespan, this battery can save you much cost against frequent battery replacement. The working life of lithium battery especially under the outdoor high temperature environment is five times longer than the traditional lead acid battery. Product Parameters Nominal Voltage 51.2V Nominal Capacity 300Ah Energy 15.36KWh Combination mode 16S1P Cycle Life â?¥6000 Cycle, 80%DOD, 25�ºC BMS conï¬?guration 16S150A Operating voltage range 41.6V~59.2V Rated charge and discharge current 150A Peak current 160A Continue @170A 3s Rated charging and discharging power 7.68Kw Peak power 8.192Kw Continue @8.704Kw 3s Short-circuit current 0.762Ka@100us Communication mode CAN, RS485 Parallel number Recommend 6 in parallel(Maximum support 16 in parallel) Remote data Bluetooth optional/Wiï¬? Weight 120kg Dimensions (L*W*H) mm 720*260*580mm Operating temperature Charging: 0�ºC~+50�ºC / Discharge: -10�ºC~+60�ºC Relative humidity 0~95% Storage temperature
Basic Info. Model NO. LFP25.6-100 Electrolyte LiFePO4 Color White Usage Solar/ Marine/ Telecom / Electric Mobility Warranty 3 Years OEM/ODM Acceptable Package Carton and Pallet Lead Time 20-30 Days Dimension 750*145*250mm Transport Package Carton Specification 28kg Trademark PUSTUN Origin China HS Code 8507600090 Production Capacity 5000 Product Description Product Description 25.6V100ah Renewable Energy Lithium Ion LiFePO4 Battery Lithium iron phosphate battery is a kind of lithium ion battery that uses lithium iron phosphate (LiFePO4) as the positive electrode material and carbon as the negative electrode material. It has the advantages of high working voltage, high energy density, long cycle life, good safety performance, low self-discharge rate and no memory effect. Pustun lithium iron phosphate battery is your best power choice for energy storage system of solar street light. This LFP series battery is specifically designed for solar street light application, which has more than 10 years service life; LFP series batteries are the best choice for the durable, safe, environment-friendly energy solution and they can be customized according to your requirement, such as dimension, voltage, capacity of battery. With an increased lifespan, this battery can save you much cost against frequent battery replacement. The working life of lithium battery especially under the outdoor high temperature environment is five times longer than the traditional lead acid battery. Product Parameters Nominal Voltage 25.6V Nominal Capacity 100Ah Energy 2.56KWh Combination mode 8S1P Cycle Life â?¥6000 Cycle, 80%DOD, 25�ºC BMS conï¬?guration 8S100A Operating voltage range 20.8V~29.6V Rated charge and discharge current 100A Peak current 100A Continue @120A 3s Rated charging and discharging power 1.28Kw Peak power 2.56Kw Continue @3.072Kw 3s Short-circuit current 0.225Ka@100us Communication mode CAN, RS485 Parallel number Recommend 6 in parallel(Maximum support 16 in parallel) Remote data Bluetooth optional/Wiï¬? Weight 28kg Dimensions (L*W*H) mm 750*145*250mm Operating temperature Charging: 0�ºC~+50�ºC / Discharge: -10�ºC~+60�ºC Relative humidity 0~95% Storage temperature