The unique innovative sunfine sms inverters succeeds in realizing gird tie and off grid two modes auto switch , that's our completely sel-dependent innovation. Grid tie mode is preferred always, when the public grid and pv panel running well, sms inverter will furnish the power to loads and charge batteries, and the surplus power will feed in pubulic grid; when grid has fault, sms inverter will switch to off grid mode after very shot time. When the public grid returns right, sms inverter will switch back to grid tie mode.
Features:
Power range 2kw-20kw
Max. Efficiency 97.0%
Mppt 99.0%
Power factor 0.9999
Afd against anti-islanding
Pure sine wave thd
Multi-protection for maximum safety
Multi-language lcd display with button operation
Less standby power loss
Stacked available
Protection category ip65
Topology hf-chain
Rs485/232 compatible
Battery manage option
Various solar panel types matched
Various battery types matched
2kw: 466*270*181mm; 22kgs, 1pc/honeycomb carton/fumigated playwood case
Sunfine sm inverters transform the ustable dc power to single phase pure sine wave ac power feed in public grid.
Features:
Power range 1kw-20kw
Max. Efficiency 97.0%
Mppt 99.0%
Power factor 0.9999
Afd against anti-islanding
Pure sine wave thd&3%
Multi-protection for maximum safety
Multi-language lcd display with button operation
Less standby power loss
Stacked available
Rs485/232 compatible
Various solar panel types matched
Topology hf-chain
Protection category ip65
1kw: 454*270*181mm, 18kgs, 1pc/honeycomb carton/fumigated plywood case
Place of origin guangdong, china (mainland)
Model number eds1000
Output power 0.75-55kw
Output type triple
Input voltage 3 phase 380v/415v 15%
Output voltage 3 phase 380v/415v 15%
Type ac drive
Output frequency 0-400hz
1. Adopt space voltage vector pwm control and sensorless vector control.
2. 150% of rated torque at 1 hz frequency.
3. Perfect function, small volume, suitable for all kinds of spot.
4. Bears automatic voltage regulation (avr) and automatic current limiting function, which makes the system more stable.
5. Built-in pid controller, can realize constant pressure (flux etc. ) "one drives multiple devices" control (function in option).
6. 16 (maximum) section speed control and weaving swing frequency function give you more handy operation.
7. 0-20khz pulse input output interface are convenient for making up of digital closed-loop control system.
8. Rs485 communication interface(part in option) can be built inside the inverter to realize centralized control and main auxiliary
6. Can realize copy for parameters by using long-distance keyboard
7. Hi-performance isolating oc output, ac or dc load of 220v/0.5a can be connected
8. Traversal function can be widely applied to all kinds of spinning devices
9. Built-in braking unit
10. Built-in user¡¯s timer/counter
Applications:
Common speed regulation: transportation machine, china machine, flue-cured tobacco machine, metallurgy machine etc.
Long-distance control to start/stop of the motor: blower, food, chemical machine, packing machine, transportation machine etc.
Close-loop control system (pressure, flux): blower, pump, constant pressure water supply, air compressor, air conditioner, freezer cooling tower, music fountain, heat supply etc.
Frequent multi-speed adjustment: toughened glass, weaving, paper making, chemical etc
126*85*141.5mm
2374 Dc Ac Inverters Converters Suppliers
Short on time? Let Dc Ac Inverters Converters sellers contact you.
Ac drive, frequency inverter, inverter, frequency converter, vfd, variable frequency drive, vsd, variable speed drive, ac motor drive, energy saver, speedchanger, variator, speed controller
Outstanding points of eds2000 series:
1. Takes dsp as the core, dual cpu controlincluding the keypad cpu control
2. Low frequency (1hz) large output torque.
3. Great overload capacity. 200% of rated current transiently
4. 10 digital input channel, 3 analog input channel, can accept 0~10v, 0~5v and 4~20ma input signal.
5. 2 pulse input channel (maximum 50 khz), 2 oc digital output channel and 1 hi-speed pulse
Output channel are available.
6. Two 0~10v voltage and two 4~20ma current analog quantum output channel.
7. Output channel can be connected to standard secondary meter
8. 16 (maximum) section speed control
9. Rs485 interface as standard part
10. Remote keypad can be as long as 1000 meters off the inverter.
Apc pure sine wave inverter is the latest model presented by yiyuan electric co., ltd.. Developed on the base of our previous psw 7 series, the apc charger has achieved significant improvements on battery charging, ac transfer, etc. By adopting dip (dual in-line package) switch, the apc pure sine wave inverter provides more smart options for users to customize the performance of the device.
Features of apc pure sine wave inverter, charger
1. High overload ability of our apc charger is up to 300% rated power(20 sec.).
2. Apc pure sine wave inverter adopts low quiescent current, and power saver mode to reduce power consumption to 10w(3s sensing cycle)/3w(30s sensing cycle) *. It can extract max. Power from various batteries with different protections, and low voltage trip can be selected (9.5v/10v or 10v/10.5v).
3. Uses pfc(power factor correction) for charger, which has less power consumption than conventional units.
4. It has 15s delay before transfer when ac resumes, and overload protection when our apc pure sine wave inverter equips with generator.
5. 10ms typical transfer time between battery and ac, which guarantees power continuity of apc charger. Uses selectable input ac voltage (184-253v or 154-253v) for different kinds of loads.
6. Our apc charger allows start up and through power with depleted batteries. Its powerful charge rate up to 90amp**.
7. It can offer 3-step intelligent battery charging, and equipped with 8 preset battery type selector for totally flat batteries.
8. Lcd status display, battery/ac priority switch, usb communication port are available for our apc pure sine wave inverter, it also has 17 alarms/warnings for easier operation and trouble-shooting, and ability to switch the unit on/off. In addition, select/deselect power saver mode can be used too.
Note:*for 1kw one. **for some models.
General purpose inverter: KE200,KE300, KE600 series;
Power rating: 0.4KW to 1200KW
Voltage: 220V to 660V
Control mode: V/F control, open-loop vector control & close-loop vector control
Non-isolated( transformerless)
Max input power(dc):3600w
Max dc input voltage:600v
Trigger voltage: 420v dc
Mppt voltage range¡êo350~600v dc
Rated input current(dc):10a
Max input current
Dc input channels¡êo 2
Rated ac output power:3000w
Max ac output power:3300w
Rated grid voltage: 230/240v ac
Grid voltage range:195.5~270 ac
Max output current: 15a
Rated grid frequency: 50/60hz
Display 1 lcd, 2 led
Thd&3%
Power factor>99%
Direct current injection<20ma
Grid mornitoring: rs 485
Power consumption at nigh
Protection class: ip 65
Cooling method: natural cooling
Operating temperature
Storage temperature: -40~80
Relative humidity:0~100%
Altitude <2000m
Reference physical size(l*w*h)615*343*217mm
Reference weighto26
* using the fifth efficient ipm power module from mitsubishi
* high conversion efficiency, max. Efficiency¡ý92%
* perfect protection and warning functions
* low frequency transformer, which ensures that inverter has high efficiency and low no-load loss.
* pure sine wave output, has higher efficiency and higher capability of driving load.
* lcd display, small size, high efficiency, easy installation.
* european CE certification and australian CEC listed.
* using the fifth efficient ipm power module from mitsubishi
* high conversion efficiency, max. Efficiency¡ý92%
* perfect protection and warning functions
* low frequency transformer, which ensures that inverter has high efficiency and low no-load loss.
* pure sine wave output, has higher efficiency and higher capability of driving load.
* lcd display, small size, high efficiency, easy installation.
* european ce certification and australian cec listed.
For CNC, textile machine, printing machine, packaging machine, we usually use more than 1 motor in 1 machine. But the common servo drive in the market can only run 1 servo motor. Therefore we need such a servo drive which can run 2 motors together. Now it is launched. Whats more, it will save your cost and mounting space sharply! Its very suitable for CNC lathe machine, or other 2-axis machine.
HSV-162A uses the latest Digital Signal Processor (DSP) for motion control, Complex Programmable Logic Device (CPLD), and Intelligent Power Module (IPM). It features small size, easy installation, and easy commissioning. HSV-162A takes full use of processing chips and saves installation space. It is the preferred feed drive for your economical CNC machines.
Five control modes:
Full state display capability
Alarm memory capability
Customized input and output signal
Wide range of speed regulation ratio
Integration of main circuit and the input power supply of the control circuit
Small size and easy installation
AC servo drives and motors- Which is compatible with SIEMENS, FAGOR CNC controller, and all the types of PLC.
Dual-motor servo system Its very suitable for CNC lathe machine, or other 2-axis machine, save much cost.
Servo system for AC380V power input lower current, and higher torque, free of transformer.
DNV360/DNV310/DNV300 series inverter is a high-quality, multi-function vector control inverter. Flux through the motor current and torque current decoupling control, to achieve a rapid response and accurate torque control, high precision operation for a wide range of speed and torque control.
The new hardware platform, scientific production technology and self-developed special debugging testing equipment to ensure the product more stable and reliable in below applications. Metallurgy, petroleum, chemical, textile, electric power, building materials, coal, medicine, food, paper, plastics, printing, lifting, cable, washing, water, heating, sewage treatment and other industries, machinery and equipment for: drawing machine, mixer, extruder, slitting, winding machinery, compressors, fan pumps, grinders, conveyors, hoists, centrifuges, and a variety of mechanical speed. Low frequency 180% large torque
3-hall hardware protected
Waves current limit. Over-load, over-torque protection.
Extensive expansion and interface
Rich industry application of expansion card
11 digital input / 4 digital output
2-way AD/ 2-way DA
Digital voltage/ pulse given/ rotary encoder
Powerful communication function
Drino standard Modbus
Optional industrial application Modbus
SAE 1939 of HEVBUS CAN
Siemens Pribus DP
A key shuttle double-keyboard control
Local/ Remote
Multi-language text display
8 group of control parameters storage
Application filed:
Metallurgy, petroleum, chemical, textile, electric power, building materials, coal, medicine, food, paper, plastics, printing, lifting, cable, washing, water, heating, sewage treatment and other industries. Machinery and equipment for : drawing machine, mixer, extruder, slitting, winding machine, compressors, fan pumps, grinders, conveyors, hoists, centrifuges, and a variety of mechanical speed.
Introduction:
The I-P-PPI 1000W design of pure sine wave inverter are ultimate choice of appliances demand a clean, pure source of AC power.This inverter is a high conversion efficiency model and continuous working module generating a sinusoi-dal wave from a 12/24V/48V - battery bank, which can supply energy to various loads such as resis-tive load (heater),inductive load (air conditioners, refrigerator),motors (vacuum cleaners), and rectifier load (computer). It is compatible with optional accessories such as the Remote ON/OFF Control unit and the selectable sockets.
Application:
Designed for a variety of applications such as residential, commercial, emergency and vehicles, constructi- on and solar & wind system etc.
Product Features:
1. Low voltage input model adopt original imported IR MOS tube.The current is 5.5 times of rated current.
2. It low voltage input connection adopt high frequency low resistivity electrolytic capacitor. How- ever ordinary capacitor will explode if the temperature become very high.
3. Every transformer has independent fuse protection.If there is a MOS tube break down,then the fuse will break fast.So that will not effect other MOS tube to break.
4. All the protection signal adopt monolithic processing.Circuit is simple and stable.
5. Input and output are isolated to ensure the operation stability
6. Output circuit adopt convertible circuit.The SPWM signal produced by Single Chip Microcomputer drive the A3120 optical coupler.Then the optical coupler isolated drive the output through IGBT tube.Adopt negative pressure to cut off IGBT to eliminate Miller effect,so the output is more steady.
7. The whole design adopt patch technology.The circuit is simple and steady.
8. Optional remote ON/OFF control switch;
9. Smart protection function with LED and alarm show.
Top Level Quality Pure Sine Wave Inverter
With battery charger & UPS I-P-TPI series
CPU intelligent management,
Latest American technical inverter,
Adopted best electric components, stable quality, long-life
The high conversion efficiency ( 87%-98%)
Low power consumption,1W~6W under sleep state.
I . Introduction
This power inverter series is a member of the most advanced line of mobile AC power system available. This design combines the advantages of top class inverters in the world global market and adopts latest American low frequency circuit design. The features are high conversion efficiency, high performance and lowest consumption. The models range from 1000W-6000W.
II . Application:
It supplies reliable pure sine wave power for various loads in various fields.
This design is special for using in solar & wind system with excellent conversion efficiency.
Application loads: various loads such as resistive load, inductive load, motors and rectifier load, like team ship, truck, industrial equipment, air conditioning, television, cash register, refrigerator, computer, electric power tool etc.
Application fields: It can be used in every field, such as business, working station, home, industry fields etc.
III. Production Functions:
1. DC/AC Conversion Function:
With advanced conversion technologies, the machine owns strong overload ability, high conversion efficiency. It is suitable for high demand industry, such as manufacture, energy industry and so on.
2. High-power Intelligent charging function:
1). It can charge for all kinds of batteries. For more details please check the parameter of the product.
Remarks: standard matched battery is free maintenance lead-acid battery. If lithium battery, we need to reset the parameter of the inverter according to the specification of customers' battery.
2). The maximum charge current for DC 12V input is 40A, for DC 24V/48V is 70A.It can be adjusted by the users.
The charging process can be divided into three stages.
Stage I: With largest constant current charging, this can improve the backup power.
Stage II: Constant voltage charging to charge batteries gradually, then there is enough time for batteries to absorb energy .Therefore, battery electrodes are protected and battery overcharge can be avoided.
Stage III: When the batteries are fully charged, the output of inverter will turn into float voltage to maintain full power state of batteries for a long time. Meantime, it would auto detect the battery power, and stop working for saving electricity after finished charging.
2. UPS Function:
When this inverter connected with batteries and utility, it is made up of UPS system, which can make sure the loads keep working after the utility cut off suddenly.
Step 1: When utility power is available, it will output directly after stabilizing voltage and charge batteries simultaneously.
Step 2: When utility power cuts off, the system will convert DC power to AC power automatically to ensure uninterrupted power supply within 4ms.
Step 3: When utility power comes back, the system will turn into utility power supply automatically and charge batteries simultaneously.
3. Sleep Function:
No load power is between 1W-6W when on sleep mode and only the chip works. This inverter will automatically loop detection under the sleep mode, when the connected loads power more than 30W, the system will automatically start to work and turn into normal mode within 20S for providing power to the loads; when the loads power less than 30W, the machine will back to sleep mode automatically within 20S.This can largely reduce the waste of electricity .It is a special design for saving energy.
4. Products Features:
1. Pure sine wave output.
2. Built-in transfer switch automatically transfers between inverter power and incom- ing AC power.
3. CPU management, intelligent control, module design.
4. LEDs display function;
5. High conversion efficiency (between 87%-98%)/ low no load consumption.
6. Can match with all kinds of batteries, such as sealed lead acid battery, open lead- acid battery, gel battery and kinds of lithium batteries.
7. Three-step intelligent charging mode available. It charges all kinds of batteries intelligently. And the maximum charging current is adjustable. It also can be used as a charger.
8. This series inverter is also called dynamic inverter according to the advantage of strong overload capacity. For example, 1KW model can drive 1P air conditioning, 2KW can drive 2P air conditioning,3KW can drive 3P air conditioning etc.
9. With adopting latest American low frequency circuit design, and new electric materials, the whole system is more stable, low malfunction rate, long-life.It is no problem to use for more than 5 years under the normally use.
10. 3-year warranty plus life-time service.
5. Protection:
High voltage protection
Under-voltage protection
Over-temperature shutdown
Automatic overload protection
Short-circuit protection
6. Parameter:
I-P-TPI series
Model 1000W 2000W 3000W 4000W 5000W 6000W
DC input DC12V/ DC24V/ DC48V Optional DC 24V/DC48V Optional
Utility Model Specifications
Input Wave Type Sinusoid (utility or generator)
Nominal Input Voltage AC 100V/110V/220V/230V/240V ( Optional)
Input Voltage Range AC75V~135V or AC184V~AC253V
Nominal Input Frequency 50Hz or 60Hz (Optional)
Input Frequency Range 47+0.3Hz~55+0.3Hz 50Hz or 57+0.3Hz~65+0.3Hz 60Hz ;
Output Wave Type Same as the input wave type
Overload Protection Circuit breaker startup
Short Circuit Protection Circuit breaker startup
Power Efficiency >98%
Transfer Current 30A
Transfer Time (Ac to Dc) 4ms
Transfer Time (Dc to Ac) 4ms
Bypass switch current YES
Max Overload Current of Bypass 30A
Inverter Mode Specifications
Rated Output Power (W) 1000W 2000W 3000W 4000W 5000W 6000W
Power Factor 1 (Sufficient output power)
Nominal Output Voltage (V) 100V/110V/220V/230V/240V AC(Optional)
Nominal Output Frequency (Hz) 50Hz 0.3Hz or 60V , 0.3Hz
Output Voltage Range 5%
Efficiency 87%~98%
Over-Load Protection (110%
(125%
Load>150% 10%: Fault (shutdown output) after 20s;
Peak capacity (10s) 2000W 4000W 9000W 12000W 15000W 18000W
Output Short Circuit Protection Current limited (cut off after 10s)
Circuit Breaker 30A
Low Battery Alarm 10.5Vdc 0.3Vdc 12V Input
21.0Vdc 0.6Vdc 24V Input
42.0Vdc 0.6Vdc 48V Input
Low DC input voltage automatic shut-down 10.0Vdc 0.3Vdc 12V Input
20.0vdc , 0.6Vdc 24V Input
40.0vdc , 0.6Vdc 48V Input
High DC input voltage warning & outage 16Vdc 0.3Vdc 12V Input
32Vdc 0.6Vdc 24V Input
64Vdc 0.6Vdc 48V Input
High DC input voltage Recover 15.5Vdc 0.3Vdc 12V Input
31.0Vdc 0.6Vdc 24V Input
62.0Vdc 0.6Vdc 24V Input
Power-saving mode 1W~6W
Power on mode 20W~60W
Charge Mode Specifications
Nominal Output Voltage Please check the charging voltage sheet according to the battery type
Maximum Charge Current 12V Input, maximal adjustable charging current is 70A
24V Input, maximal adjustable charging current is 40A
48V Input, maximal adjustable charging current is 40A
Charge Current Regulation 5Adc
Battery initial voltage 0 ¨C15.7 Vdc (can operate with 0V battery)
Charger Short Circuit Protection Circuit breaker
Circuit breaker 30A
Over Charge Protection Bat. V 15.7Vdc/31.4Vdc,beeps 0.5s per1s & failure after 60s
Charging specification
Rule Three stages:
Constant current charging:( Constant current stage) constant voltage charging (constant voltage stage) float charging (constant voltage stage)
Charging stages Change Constant current charging Phase: When connected AC input, the charger will works with maximum constant current until constant voltage stage.
Software timer calculates from the beginning of AC power, till it reached the constant voltage 0.3V, and then mark the timing as T0, T0 10 = T1 .
Constant voltage charging Phase: Starting from T1,charger will keep constant voltage mode until the timer finished. And then slow to float voltage. The minimum limited of timer is 1 hour, the maximum is 12 hours.
Battery Type Set-up Switch settings description Main charging
Voltage Float charging
Voltage
12V 24V 12V 24V
0 Factory settings - - - -
1 America Gel batteries 14 28 13.7 27.4
2 Glass wool batteries 1 14.1 28.2 13.4 26.8
3 Glass wool batteries 2 14.6 29.2 13.7 27.4
4 Sealed lead-acid batteries 14.4 28.8 13.6 27.2
5 Europe Gel batteries 14.4 28.8 13.8 27.6
6 Open lead-acid batteries 14.8 29.6 13.3 26.6
7 Calcium batteries 15.1 30.2 13.6 27.2
8 Deacidification battery 15.5 31 Closed after 4 hours
9 Unused - - - -
Remarks: Type 4 battery is the normal type used by customers(Type 4:Sealed lead-acid batteries )
LED Indicators
Power Saving Mode The First Green Indicator light (No load Power¨Q6W )
Overload Shut-down The Second Red Indicator light
Over Temperature The Third Red Indicator light:
Float charging mode The Fourth Green Indicator light
Fast charging mode The Fifth Yellow Indicator light
Convert DC/AC Mode The Sixth Green Indicator light( battery charging shut-down)
Utility Model Mode The Seventh Green Indicator light(battery charging start)
Charge Mode The Eighth Indicator light
Invert Indicator The Ninth Indicator light
Failure Indication The Tenth Indicator light
Buttons functions:
Power-saving mode The inverter start under power-saving mode(No load power is less than 6W), when power is >30W, automatic to start-up normally
Power off Power is off, no input /output power
Boot Normally Inverter start under normal state without saving power state, no-load power is 20W~60W
Battery types Refer to Battery Model Set-up
Battery Charge Current set-up Maximum Charge Current can be set.
Refer to maximum charge current
Warning
Low Voltage Inverter Green Indicator lights, the inverter beeps 0.5s every 5s
Over Voltage .Inverter Green Indicator lights, the inverter beeps 0.5s every 1s & fault after 60s
Overload capacity under the DC/AC Convert mode
1) 110%~125% for 14 min, It will beep 0.5s every 5s after 14min..
2) 125%~150%, It will beep 0.5s every 1s; fault caused after 60s
3) >150%, It will beep 0.5s every 1s ; fault caused after 20s.
600*300*300mm.
2374 Dc Ac Inverters Converters Suppliers
Short on time? Let Dc Ac Inverters Converters sellers contact you.
