mainly produced and exported metal material,like metal scrap¡¢non-ferrous metal¡¢metal powders¡¢rare earth materials with high quality and resonable price. different products have different way of packing
Calcium metal Chemical composition: ca: 99.0%min and ca: 98.5%min. Calcium lumps: 30-100mm, 50-200mm. Calcium granulars: 0-2mm, 0-2.5mm, 0-6mm Calcium turning: 30-80mm (length), 6-10mm (width), 0.7-53.6mm(thickness).
Spec:1500 mesh Praticle diameter d50 um : 3.5 Water coveage ratio cm2/g 10000 Residual on sieve 325mesh% trace amount Intaglio printing alloy brightness ¡ý 120 50kg/drum, 20kg/drum, 1kg/iron box, 10kg/carton
Fe68 -70% mill scale offer[sell]. Loos jumbo bags
Sio2 - 85.26% Cao - 1.40% Mgo - 1.40% Fe2o3 - 2.70% Al2o3 - 1.30% Loi - 7.26% Na2o - 0.13% K2o - 0.15%
Content: 99.9% Specification:200-300 Mesh density: 8.9 Melting point: 950 1) quick detail: M.F.: cupb3sn6zn6 Cas: copper: 7440-50-8 H.S.Code: 7406104000 Un: 3089 2) properties: grey or golden yellow irregularly powder. 3) physicals: Particle size (mesh) loose density(g/cm3) -200. -300. -500. 2.5-3.5 4)chemical compositions (%): Composition cu sn zn pb density hall flow s/50g Cu85sn6zn6pb3 83-86 5-7 5-7 2-4 2.5-4.5 35-40 Cu80sn10pb10 79-81 9-11 9-11 3.5-5.0 20-30 Cu80zn20 79-81 19-21 2.0-4.5 30-35 Cu90sn10 89-91 9-11 2.5-4.5 20-35 Cu90sn10 84-86 14-16 2.5-4.5 20-35 Cu80sn20 79-81 19-21 3.0-5.0 20-35 5) applications: powder metallurgy, oil-contained bearing, friction materials. 6) storage: keep in closed dry room; avoid spillage, sparks or other source of ignition. In 25kg, 50kg iron drums with double plastic bags inner, on wooden pallet.
Particle: 10-400mesh (2mm-0.0035mm) Magnesium content: above 99.5% Active magnesium: above 98.5% Impurities: Zn: nmt 0.1% Fe: nmt 0.2% Ca: nmt0.15% Mn: nmt1.0% Cl: nmt0.005% H2o: nmt 0.1% Insoluble substances in hcl: nmt0.2% Other metals: nmt0.5% Loose density: 0.35-0.75g/cm3. Magnesium powder is inflammable and explosive. It gives out temperature and dazzling white light when burning. So it's been widely used in military aerospace and other scientific and technological fields. Because of its active chemical characteristic, magnesium is usually used in metallurgy industry: it is used as dioxidizing agent and purifying agent in steelmaking and non-ferrous metal casting, and as dehydrating for organic compounds. Magnesium powder can also be used directly for organic compounds of magnesium. Especially in recent years, magnisium has been used more and more in spray coating and preservation industries. It is also used a lot in monocrystalline silicon directly olycrystalline silicon producing and metallurgy powder die-casting industry. 100kg/drum
1. Purity: 99.95% 2. Particle size: 200mesh 3. Density: 22.4g/cm3 4. Melting point: 2443 ¡ãC 5. Boiling point: 4428 ¡ãC 6. Brand: JM,Heraeus,Anglo 7. Packing: 100g,250,500g,1000g,2000g per vacuum and sealed plastic bag 8. Leadtime: Goods can be delivered within 3 days. 100g, 250, 500g, 1000g, 2000g per vacuum and sealed plastic bag.
1. Purity:92%, 95%, 99% 2. Particle size:1um 3. Density: 2.34g/cm3 4. Melting point: 2300 C 5. Boiling point: 4002 C 6. Packaging: 1.0kg/plastic bag(vacuum), 10kgs/carton. 1.0kg/plastic bag(vacuum), 10kgs/carton.
1. Purity: 99.95% 2. Particle size: 200mesh 3. Density: 12.37g/cm3 4. Melting point: 2250 ¡ãC 5. Boiling point: 3900 ¡ãC 6. Packing: 100g,250,500g,1000g,2000g per vacuum and sealed plastic bag 7. Leadtime: Spot goods. Products can be delivered within 3 days. 100g, 250, 500g, 1000g, 2000g per vacuum and sealed plastic bag.
1. Purity:99.99% 2. Particle size:100-600mesh 3. Density: 9.75g/cm3 4. Melting point: 271.52 C 5. Boiling point: 1564 C 6. Packing: In vacuum poly-bag. In vacuum poly-bag.
It is metal powder.
Technical Parameter: Model KAA50 APS 50nm; Purity 99.9%;SSA 20(m2/g) sphere, black Note: A variety of different size nano particles are available to be customized. Application: 1. Highly effective catalyst: Increases to rockets solid fuel or the blasting explosive, raises the fuel burning speed and combustion stability; 2. Mixes 5~10% nanometer aluminite powder in the AlN powder,can reduces the agglutination temperature, enhances the sintered body density and the thermal conductivity; 3. Metals and nonmetallic surface conduction coating processing: Under the lack of oxygen condition, is lower than the powder body melting point the temperature implementation micro electron component coating; 4. Electric conduction films, preparation polishing paste and so on. This product should be stored in dry, cool and sealing of the environment, can not be exposure to air,in addition should avoid the heavy pressure, according to ordinary goods transportation.
A variety of different size 20-100nm nano particles are available to be customized. 1. The superficial conductive coating processing of metal and non-ferrous metal: Due to their high-activity surface, aluminum, copper and nickel nanoarticles can coat under oxygen-free condition below smelting point of the particles. This technology can be adopted in the manufacture of microelectronic devices. 2. Efficacious catalyzer: Copper and copper alloy nanometer, feature high efficacy and selectivity, can be used as catalyzer in some reactions, e.g. carbon dioxide compound hydrogen to produce methanol. 3. Conductive slurry: The electronic size with good performance made of copper nanoparticle instead of valuable metal particles cuts cost to a large extent. This technology is used to the preference of microelectronic processes. 4. Raw material for bulk nanomaterial: Adopt the inert gas to make bulk copper nano composite material with powder metallury. 5. Medicine append material: Ideal append material to the new and highly efficient medicine for curing the osteoporosis and calcaned spur. 6. Metallic nanometer self-repairer:Applied to the self-repairing when adding the metallic nanometer powder to the kinds of machinery. This product should be stored in dry, cool and sealing of the environment, can not be exposure to air, in addition should avoid the heavy pressure, according to ordinary goods transportation.
Application direction: 1. High-performance magnetic recording materials: With its advantages including high coercivity, high saturation magnetization intensity (up to 1477km2/kg), signal-to-noise ratio and good oxidation resistance, it remarkably improves the performance of tape, large-capacity hard disk and soft disk. 2. Magnetic fluid: The magnetic fluid made of iron, cobalt, nickel and its alloy particles provide excellent properties, they are widely used in seal shock absorption, medical equipment, acoustic adjustment, optical display, etc. 3. Microwave-absorption materials: Metal nanoparticles has special absorbing ability to electromagnetic wave. Iron, cobalt. Zinc oxide particles and its carbon package particles can be used as military high-performance millimeter wave invisible materials, visible light-infrared invisible materials and structural type invisible, and mobile radiation shielding materials. 4. Magnetic-conductive paste: With the advantages of high saturation magnetization and high magnetic inductivity of iron nanoparticle, magnetic conductive size can be made, it is used for the binding structure of fine magnetic head. 5. Agent-driven Nano. Some with magnetic nanoparticles, as the carrier made its agent-oriented, will enable the drug under the outer magnetic field gathered at a local body so as to the location of the pathology of the high concentration of drug treatment, particularly for cancer, tuberculosis, and so on. This product should be stored in dry, cool and sealing of the environment, can not be exposure to air, in addition should avoid the heavy pressure, according to ordinary goods transportation.
1. Efficacious comburent: Adding nickel nanoparticle into the solid fuel propellant of rocket increases combustion heat, combustion efficiency and combustion stability. Conductive paste: Electronic size is widely used for wiring, packaging and connection in microelectronic industry, it plays an important role in the minimization of electronic device. The electronic paste made of nickel, copper and aluminum nanoparticle has good performance, and it helps further minimize the circuit. 2. Magnetic fluid: The magnetic fluid made of iron, cobalt, nickel and its alloy particles provide excellent properties, they are widely used in seal shock absorption, medical equipment, acoustic adjustment, optical display, etc. 3. Efficacious catallyzer: Due to its large surface and high activity, nickel nanometer has good catalyzing effect, it is applicable to organic hydrogenation reaction, tail gas processing, etc. 4. High-performance electrode: Through proper processes nickel nanoparticle can be made into electrode with huge surface, which considerably improves discharge efficiency. 5. Actuating sintering additive: As nanoparticle has large surface and superficial atom ratio, it is in high-energy state, it has good sintering ability even under low temperature; it is an efficacious sintering additive, which substantially lowers the sintering temperature of particle metallurgy products and high-temperature ceramic products. 6. The superficial conductive coating processing of metal and non-ferrous metal: Due to their high-activity surface, aluminum, copper and nickel nanoarticle can coat under oxygen-free condition below smelting point of the particles. This technology can be adopted in the manufacture of microelectronic devices. This product should be stored in dry, cool and sealing of the environment, can not be exposure to air, in addition should avoid the heavy pressure, according to ordinary goods transportation.
Size and composition of a variety of high-quality single-uniform hybrid nano-copper-nickel composite powder can be controlled Application: 1. Metal nano-lubrication additives: add 0.1 to 0.3 percent from oil, grease, in the process of Moldova Moldova Sassafras Sassafras Vice self-lubricating surface, he studied Film, a significant reduction in the Mount Sassafras, deputy anti-wear friction-reducing properties. And a single metal nano-lubrication additives, to reduce the amount of powder by adding three to five times, to repair a short time, Mount Sassafras coefficient of small and long-term stability. 2. Block of metal nanocomposite materials used: inert gas protection of the powder sintering Preparation large copper-nickel metal nanocomposites. A plastic bag lined anti-static packaging, 100 ~ 1000g sub-bag.
1. D50 is from 1um to 500um. 2. Chemical content: AL 99.75% MIN, Si 0.06% max, Fe 0.06% max, Cu 0.002% max. 3. Applications: metal pigments, solar cell paste, thermal interface material, fuelcell energy. 1. 40kg or 200kg steel drum. 2. Pallet.
1. D50 is 3-4um. 2. Chemical content: Al 99.75% min, Si 0.06% max, Fe 0.06% max, Cu 0.002% max. 3. Strict control of the big particles. 1. 40kg or 200kg steel drum. 2. Sea and air trasportation.
1. D50 is 4-6um. 2.Chemical content: Al 99.75% min, Si 0.06% max, Fe 0.06% max, Cu 0.002% max. 3. Stirct control of the span and big particles. 1. 40kg or 200kg steel drum. 2. Air and sea transportation.
