Size and composition of a variety of high-quality single-uniform hybrid nano-copper-nickel composite powder can be controlled Application: 1. Metal nano-lubrication additives: add 0.1 to 0.3 percent from oil, grease, in the process of Moldova Moldova Sassafras Sassafras Vice self-lubricating surface, he studied Film, a significant reduction in the Mount Sassafras, deputy anti-wear friction-reducing properties. And a single metal nano-lubrication additives, to reduce the amount of powder by adding three to five times, to repair a short time, Mount Sassafras coefficient of small and long-term stability. 2. Block of metal nanocomposite materials used: inert gas protection of the powder sintering Preparation large copper-nickel metal nanocomposites. A plastic bag lined anti-static packaging, 100 ~ 1000g sub-bag.
Application direction: 1. High-performance magnetic recording materials: With its advantages including high coercivity, high saturation magnetization intensity (up to 1477km2/kg), signal-to-noise ratio and good oxidation resistance, it remarkably improves the performance of tape, large-capacity hard disk and soft disk. 2. Magnetic fluid: The magnetic fluid made of iron, cobalt, nickel and its alloy particles provide excellent properties, they are widely used in seal shock absorption, medical equipment, acoustic adjustment, optical display, etc. 3. Microwave-absorption materials: Metal nanoparticles has special absorbing ability to electromagnetic wave. Iron, cobalt. Zinc oxide particles and its carbon package particles can be used as military high-performance millimeter wave invisible materials, visible light-infrared invisible materials and structural type invisible, and mobile radiation shielding materials. 4. Magnetic-conductive paste: With the advantages of high saturation magnetization and high magnetic inductivity of iron nanoparticle, magnetic conductive size can be made, it is used for the binding structure of fine magnetic head. 5. Agent-driven Nano. Some with magnetic nanoparticles, as the carrier made its agent-oriented, will enable the drug under the outer magnetic field gathered at a local body so as to the location of the pathology of the high concentration of drug treatment, particularly for cancer, tuberculosis, and so on. This product should be stored in dry, cool and sealing of the environment, can not be exposure to air, in addition should avoid the heavy pressure, according to ordinary goods transportation.
1. Efficacious comburent: Adding nickel nanoparticle into the solid fuel propellant of rocket increases combustion heat, combustion efficiency and combustion stability. Conductive paste: Electronic size is widely used for wiring, packaging and connection in microelectronic industry, it plays an important role in the minimization of electronic device. The electronic paste made of nickel, copper and aluminum nanoparticle has good performance, and it helps further minimize the circuit. 2. Magnetic fluid: The magnetic fluid made of iron, cobalt, nickel and its alloy particles provide excellent properties, they are widely used in seal shock absorption, medical equipment, acoustic adjustment, optical display, etc. 3. Efficacious catallyzer: Due to its large surface and high activity, nickel nanometer has good catalyzing effect, it is applicable to organic hydrogenation reaction, tail gas processing, etc. 4. High-performance electrode: Through proper processes nickel nanoparticle can be made into electrode with huge surface, which considerably improves discharge efficiency. 5. Actuating sintering additive: As nanoparticle has large surface and superficial atom ratio, it is in high-energy state, it has good sintering ability even under low temperature; it is an efficacious sintering additive, which substantially lowers the sintering temperature of particle metallurgy products and high-temperature ceramic products. 6. The superficial conductive coating processing of metal and non-ferrous metal: Due to their high-activity surface, aluminum, copper and nickel nanoarticle can coat under oxygen-free condition below smelting point of the particles. This technology can be adopted in the manufacture of microelectronic devices. This product should be stored in dry, cool and sealing of the environment, can not be exposure to air, in addition should avoid the heavy pressure, according to ordinary goods transportation.
Technical Parameter: Model KAA50 APS 50nm; Purity 99.9%;SSA 20(m2/g) sphere, black Note: A variety of different size nano particles are available to be customized. Application: 1. Highly effective catalyst: Increases to rockets solid fuel or the blasting explosive, raises the fuel burning speed and combustion stability; 2. Mixes 5~10% nanometer aluminite powder in the AlN powder,can reduces the agglutination temperature, enhances the sintered body density and the thermal conductivity; 3. Metals and nonmetallic surface conduction coating processing: Under the lack of oxygen condition, is lower than the powder body melting point the temperature implementation micro electron component coating; 4. Electric conduction films, preparation polishing paste and so on. This product should be stored in dry, cool and sealing of the environment, can not be exposure to air,in addition should avoid the heavy pressure, according to ordinary goods transportation.
A variety of different size 20-100nm nano particles are available to be customized. 1. The superficial conductive coating processing of metal and non-ferrous metal: Due to their high-activity surface, aluminum, copper and nickel nanoarticles can coat under oxygen-free condition below smelting point of the particles. This technology can be adopted in the manufacture of microelectronic devices. 2. Efficacious catalyzer: Copper and copper alloy nanometer, feature high efficacy and selectivity, can be used as catalyzer in some reactions, e.g. carbon dioxide compound hydrogen to produce methanol. 3. Conductive slurry: The electronic size with good performance made of copper nanoparticle instead of valuable metal particles cuts cost to a large extent. This technology is used to the preference of microelectronic processes. 4. Raw material for bulk nanomaterial: Adopt the inert gas to make bulk copper nano composite material with powder metallury. 5. Medicine append material: Ideal append material to the new and highly efficient medicine for curing the osteoporosis and calcaned spur. 6. Metallic nanometer self-repairer:Applied to the self-repairing when adding the metallic nanometer powder to the kinds of machinery. This product should be stored in dry, cool and sealing of the environment, can not be exposure to air, in addition should avoid the heavy pressure, according to ordinary goods transportation.
Product Name : Copper Nano powder Pack Size: 10 gram, 50gram, 100gam ,250gram, 500 gram Product Name Copper Nanoppowder Cas No 7440-50-8 Appearance Powder Purity 99.9% APS 60-70 nm (Can be Customized) Formula Cu Product no. SCM-NM-108/22 Molar Weight 63.5 Description :- The superficial conductive coating processing of metal and non-ferrous metal; Medicine append material; Capacitor materials; Raw material for bulk nanomaterial. Adopt the inert gas to make bulk copper nano composite material with powder metallurgy; Cu Nanoparticles widelly used as Catalysts; Efficacious catalyst: Copper and copper alloy nanometer, feature high efficacy and selectivity, can be used as catalyst in some reactions, e.g. carbon dioxide compound hydrogen to produce methanol. Cu Nanoparticles used as Conductive coatings; Conductive inks; Conductive slurry: The copper nanopowder can be applied to the productiion of MLCC internal electrode and other electronic components in electronic slurry for the miniaturization of microelectronic devices; The electronic size with good performance made of copper nanopowder instead of valuable metal particles cuts cost to a large extent; This technology is used to the preference of microelectronic processes; Conductive pastes; Cu Nanoparticles are high thermal conductivity materials; Nanometal Lubricant additives: Adding 0.1~0.6% of copper nanopowder to lubricant oil and lubricant grease. It will form a self-lubricating and self-repairing coating film in the frictioning surface. Related Products: Copper Ag-Coated Nanopowder / Copper Silver-Coated Nanoparticles (300nm, Ag 20%, Cu 80%) Copper (Cu) Nanopowder / Nanoparticles (Cu, 99.5%, 800 nm, metal basis) Copper (Cu) Nanoparticles / Nanopowder (Cu, 99.9%, 580 nm, metal basis) Copper (Cu) Nanopowder / Nanoparticle (Cu, 99.9%, 90-250 nm, metal basis) Copper (Cu) Nanopowder / Nanoparticle (Cu, 99.9%, 100nm, metal basis) Copper (Cu) Nanopowder / Nanoparticles (Cu, 99.9%, 70nm, metal basis) Copper (Cu) Nanopowder / Nanoparticle (Cu, 99.9%, 40 nm, metal basis) Copper (Cu) Nanopowder / Nanoparticle (Cu, Cu2O Coated, 99%, 30 nm, metal basis) Copper (Cu) Nanoparticles / Nanopowder (Cu, Partially Passivated, 99.8%, 25 nm) Copper (Cu) Nanoparticles / Nanopowder (Cu-Carbon Coated, 99.8%, 25 nm) Copper (Cu) Wire, D: 100nm, L: 15um, 99.5%) Sn-Cu Alloy Nanopowder / Nanoparticle, 99.9%, 40 nm-100 nm, SN:CU/9:1 Sn-Cu Alloy Nanopowder / Nanoparticle, 99.9%, 40 nm-100 nm, SN:CU/1:9 Sn-Cu Alloy Nanopowder / Nanoparticle, 99.9%, 40 nm-100 nm, SN:CU/92:8 Ag-Cu Nanopowder / Nanoparticle, 99.9%,
Nanometer Products Product description: Nano nickel-copper powder; Nickel-copper nanopowder; Nano nickel-copper alloy powder. Product specification:30~60nm Molecular formula:Ni-Cu Appearance:Black powder Product use: Silicone rubber filled with conductive material, thermal conducting filler material, anti- friction material, electromagnetic shield material, catalyst, the electronics industry, conductive and heat conduction material. Packing, storage and shipping: Aluminum foil packaging, 1kg, 5kg. Seal packaging. Store in a cool &dry place. Do not contact with oxidizing agent.
We offer Copper Particles typically 10-30 nanometers (nm) with specific surface area (SSA) in the 30 - 70 m2/g range and also available in with an average particle size of 70 -100 nm range with a specific surface area of approximately 5 - 10 m2/g.
We offer nano silver (Ag) in powder form Appearance: Gray or cream colour powder Shape: spherical Average Particle Size APS: 50-150 nm (SEM) & APS: 20-80 nm (TEM) Crystallite Size: 10-20 nm (as per PXRD) Crystalline Phase: FCC (face centered cubic) Purity: 99.99 w% (as per ICP-MS data) pH value: 7-8 Surface treatment: YES Applications: Our material can be used in the preparation of conductive inks, antimicrobial coatings for textiles, various surfaces and composites etc
