Model GM750 Engine Rated Power Kw 45 Kw 61.2HP Rotating Speed 2500 rpm Noise In Cab ≤ 92 dB Out of Cab ≤ 106 dB Hydraulic System Cycle Time (s) Raise Dump Lower 3.5-4.5 2-2.5 3-3.5 Performance Operating Load 750Kg Bucket Capacity 0.55m3 Max lifting force 1610 Kg Speed 0-11.2Km/h Operating weight with standard bucket 3520Kg Tyre 12-16.5 Dimennsion: Model GM750 model GM750 Max height 3900mm overall length to outside of tyre 1980mm Dump height 2200mm Ground clearance 190mm Height to top of cab 2300mm Clearance circuit front 2200mm Overall length with bucket 3500mm Dump angle at max height 45° Dump distance 640mm Max attachment rollback when on groud 31° Overall length without bucketmm 2800mm. Angle of departure 20. 2pcs/20'GP, 4pcs/40'GP.
1.Rated capacity (kg): 2,000 2. Max lifting height (mm): 4,000 3. Diesel engine: Weichai, Changchai or according to customers¡¯ requirements. 4.Weight distribution with load front/rear (kg): 4775/635, 5525/745, 6500/870, 6925/1035 5. Internal combustion engine displacement: 2.54 L 6. Internal combustion engine fuel tank capacity: 52 L 7. Total weight ( kg) : 3200 8. Service brake: Hydraulic-foot pedal, 9. Parking brake: Mechanical-hand lever 10.Battery voltage ( V): 12/100/20h 11.Tilting angles ( forward-backward): 6¡ã/12¡ã 12.Loader center: 500 mm L:2650mm W:1300mm H:2110mm
1.Rated capacity (kg): 3,000 2. Max lifting height (mm): 4,000 3. Diesel engine: Weichai, Changchai or according to customers requirements. 4.Weight distribution with load front/rear (kg): 4775/635, 5525/745, 6500/870, 6925/1035 5. Internal combustion engine displacement: 2.54 L 6. Internal combustion engine fuel tank capacity: 52 L 7. Total weight ( kg) : 4350 8. Service brake: Hydraulic-foot pedal, 9. Parking brake: Mechanical-hand lever 10.Battery voltage ( V): 12/100/20h 11.Tilting angles ( forward-backward): 6/12 12.Loader center: 500 mm L:2600mm W:1300mm H:2140mm.
Tower crane. 40' container
Crane Models : Tadano TL250E, TL300E, TG450E, TG500E, TG550E, TG600E, TG800E, TG1000E, TG1200E Kato NK160, NK250E, NK350E, NK400E, NK500E, NK800E, NK1000E, NK1200E
EOT cranes Export Packing
Crawler crane "aska crane" is mini crawler cranes with lifting capacity of 1.7t, 2.8t, 3.0t (now remodeling) and 4.9t(will be available in 2009), manufactured by our affiliate company, r&b engineering co., ltd. In 2007 october, r&b engineering co., ltd. Was established and inherited a development and production technology from a Japanese pioneer mini crawler crane manufacture, �gtoa corporation�h. Model list Ntch174 - 1.7t petrol Cr285g - 2.8t petrol Cr285d - 2.8t diesel
Model: SA-40 1.Capacity: 4000 KG 2. Double hydraulic cylinder 3. Max Lifting Height: 1900mm 4. Minimum Lifting Height: 85mm 5. Current Price: US$ 765/set, FOB Shanghai 6. Power Pack: 220-240V/50Hz/60Hz/1Ph; 380-415V/50Hz/3Ph 7. Asymmetric arms: Short: 712-1051mm Long : 992-1462mm 8. Standard Color: Blue column / Yellow carriage and arms 9. Delivery time: 18-25 days 10. Warranty: 12 Months. Load quantity: 1X20GP/24 sets.
Load capacity: 3000kg Load center: 500mm Max. lifting speeds (full load): 400mm/s Max. driving speeds: 18/20km/h Drawbar pull: 10,000N Gradeability: 15/20% Lifting height: 4,500mm Free lift: 1270mm Tilting angles (forward - backward): 6 / 12 Min. turning radius: 2,700mm Angle stacking aisle: 2,550mm Min. under-clearance: 135mm Overall length: 3,820mm Overall width: 1,228mm Overall height (with mast retracted): 2,110mm Overall height (with mast extended): 5,770mm Overall height to overhead guard: 2,120mm Wheel base: 1,700mm Front tread: 1,000mm Rear tread: 970mm Front tyre: 28x9-15 PR Rear tyre: 6.5 - 10 PR Total weight: 4480kg Fork width: 125mm Fork thickness: 45mm Backrest height: 1,195mm Fork length: 1220mm Engine model: 490BPG made in China, imported engine ISUZU 4JG2PE-01 optional Rate power: 37kW Rotate Speed at rate power: 2,650rpm Max. torque: 145N.m Rotation speed at max. torque: 1,800-1900rpm Power shift:Tor-con Packing Details:3 pcs/20CTN & 5pcs/40CTN. 3pcs/20'GP, 5pcs/40'GP.
Specifications: 1) load capacity: 3, 500kg 2) load center: 500mm 3) max. Lifting speeds (full load): 375mm/s 4) max. Driving speeds(with/without load): 18/20km/h 5) drawbar pull(with/without load): 14.5/9.8kn 6) gradeability: 18% 7) lifting height: 3, 000mm(2 stage mast with 3300mm, 3500mm & 4000mm;3 stage mast with 4.5m, 5m & 6m) 8) free lift: 80mm 9) tilting angles (forward - backward): 6 / 12 10) min. Turning radius: 2, 500mm 11) angle stacking aisle: 2, 110mm 12) min. Under-clearance: 135mm 13) overall length: 3, 800mm 14) overall width: 1, 230mm 15) overall height (with mast retracted): 2, 110mm 16) overall height (with mast extended): 4, 270mm 17) overall height to overhead guard: 2, 110mm 18) wheel base: 1, 700mm 19) front tread: 1, 000mm 20) rear tread: 970mm 21) front tyre: 28x9-15pr 22) rear tyre: 6.50-10pr 23) total weight: 4, 580kg 24) fork width: 125mm 25) fork thickness: 45mm 26) backrest height: 1, 225mm 27) fork length: 1, 070mm(1300mm, 1500mm &1800mm optional) 28) engine model: mitsubishi 4g64-31zg (made in japan)/ nissan engine for option, Guangqing gq-4y-df (made in china) 29) rate power: 37kw 30) rotate speed at rate power: 2, 650rpm 31) max. Torque: 153.7n.M 32) rotation speed at max. Torque: 1, 600rpm 33) packing details: 3 pcs/20ctn 5 pcs/40ctn. 3 pcs/20ctn 5 pcs/40ctn.
Introduce: Automatic transmission with high efficiency and productivity Combined axles with minimum turning radius and aisle width Low energy consumption, high stability, maximum visibility Minimum noise and pollution Wide-version mast with ergonomic design for high working efficiency. ---------------------------------------------------------------- The Battery-powered is our newly invented battery powered forklift. It has a high visibility range , has an automatic transmission, it easy to operate and easy to charge. Both AC powered and DC powered models are available. It is an ideal machine for conveying product.
Introduzca: They help operators work with maximum efficiency in narrow aisles; store and retrieve loads with precision and at unprecedented heights; and make your operations more productive than ever.
Heavy Duty Design Brake system: Integral electromagnetic disk brake mounted on motor shaft. Drive wheel: complete gear train mounted on ball and roller bearing in oil bath housing. High-torque horizontally mounted motor has copper graphite brushes for excellent fabrication. Load roller: Tandem Polyurethane.
Configures of T5 are so advanced and functions are so many that there is hardly not any other product in the field can exceed it.
4x2 truck mounted crane hp:336-440 Body longth:6000-8500mm. The product of us use the Renault tech frame, they have the most comfortable cab and reliable quality. Usually we equip the cummins engine, a very famous engine brand, to supply you good truck products.
3.0ton diesel forklift truck 2stage 3m mast, hydraulic transmission (automatic), 1.22m fork, China engine 490bpg, penumatic tyre, maintenance free battery, seat with safety belt & steady bar for arm, warning light. Htc 3000f main parameter Load capacity kg 3000 Load center mm 500 Power type Diesel Max.Lifting speeds(with load) mm/s 400 Max.Driving speeds(with/without load) km/s 18/20 Max.Driving speeds(with/without load) kn 14.5/9.8 Grade ability (with/without load) % 15/20 Lifting height mm 3000 Free lift mm 80 Tilting angles(forward-backward) 6/12 Min.Turning radius mm 2450 Min.Right angle aisle width mm 2110 Min.Under-clearance 135 Dimension Overall length mm 3790 Overall width mm 1228 Overall height (mast lowered) mm 2110 Overall height (mast extend) mm 4250 Overall height to overhead guard mm 2090 Total weight kg 4320 Fork width mm 125 Fork thickness mm 45 Backrest height mm 1195 Fork length mm 1070(1200).
HTC- 915 *Adopts JiangSu SiDa four cylinder engine; *Full hydraulic transmission technology,simple structure and reliable performance; *Separate flow of single pump for operation hydraulic system,significant effect of energy conservation; *Double sealing hydraulic pipeline joint with international standard of 24awl and Oring,solved leakage problem of oil; *Load sensing fully hydraulic steering system,easy and flexible operation; *Safe and reliable single pipeline brake syesem,disk type brake; *In the nature of operation system with automatic lay flat performace at height; *Hinge joint part of bucket adopts dust prevention sealing and lubricating stucture; *Unitary and luxury dashboard; *New Luxury cab. Main technical parameter Item Parameter Item Parameter Capacity 0.5 m3 outside of rear wheel (Min. turning radius) 3600mm Rated load 1000 kg Turning angle 35each direction Dumping height 2420 mm Min. ground clearance 230mm Dumping reach 900 mm Wheel bace 1820mm Bucket lifting time 4 S Wheel tread 1400mm Total cycle time 8 S Engine SD490G Max speed 16km/h Engine power 33kW/2400rpm Max. breakforce 36 kN Tyre size 8.25-16 Max. drawing force 22 kN Overall dimensions(length*wide*height) 4960*1620*2420mm Max. gradeability 28 Whole operating weight 2990kg.
HTC380 Mini Loader is a new mini type multifunctional machine with advanced performance. With compact structure, agile movement, flexible operation, high efficient work and mighty function, HTC380 Mini Loader is competent for the work in narrow space or situation with frequently changing task, such as municipal projects, workshop, warehouse, dock, ship deck and ship cabin, etc. It can be competent for shoveling, lifting, excavating, drilling, snatching, clearing work with different attachments. Specification of HTC380 Mini Loader Model Item HTC380 Engine Rated Power(Kw) 14.9Kw(20Hp) Rotating speed(rpm) 3600 Noise (dB) 95 GMdraulic System Pressure(Mpa) 17 Cycle Time (s) Raise Dump Lower 4.27 1.34 3.31 Performance Operating Load (Kg) 200 Bucket capacity (m3) 0.15 Max Lifting Force(Kg) 375 Speed (Km/h) 5.5 Operating weight(Kg) 940 Fuel tank(L) 21 GMdraulic oil tank(L) 27 Tyre 16*6-8 Dimension of HTC380 Mini Loader Model Item HTC380 Max. height (mm) 2112 Dump height(mm) 1460 Overall height (mm) 1205 Overall length with bucket(mm) 2206 Dump distance (mm) 388 Overall Length without bucket(mm) 1752 Bucket width(mm) 980 Overall length to outside of tyre(mm) 1033 Ground clearance(mm) 90 Clearance circuit front (mm) 1307 Dump angle at max height 30 Max attachment rollback when bucket on ground 25.
Italian SME full-AC controllers, Full-AC import drive unit, Import multifuntion LCD instrument, High-capacity battery. Technical data: 1KG=2.2LB 1INCH=25.4MM Characteristics Model CPDS15 CPDS18 Rated capacity kg: 1500 1750 Load center mm 500 Power type Battery Tyres Super elastic No.of tyres (front/rear) 2/2 Dimensions Lift height mm 3000 3000 Free lift height mm 130 130 Fork size mm 35¡Á100¡Á920 35¡Á120¡Á920 Upright tilt(forward/backward) deg 5/7 Overall Length to fork face mm 2780 2830 dimensions Length to fork face (withoutfork) mm 1860 1910 Wheel width mm 1050 Overall width mm 1070 Height,mast lowered mm 1980 Height,mast extended mm 3945 Height,overhead guard mm 1990 Turning radius(outside) mm 1500 Front overhang mm 360 Right-angle store aisle(pallet800¡Á1200,1000¡Á1200) mm 2860/3060 2910/3110 Performance Travel speed(with/without load) km/h 13.2/14.3 12.8/14 Lifting speed(with/without load) mm/sec 300/470 Lowering speed(with load) mm/sec 450 Max.pulling force KN 14.84 13.08 Grade ability(with load) % 20 19 Weight Service mass(including battery) kg 3100 3260 Load per axle Full load (front/rear) kg 4020/560 4300/640 Without load (front/rear) kg 1540/1540 1480/1740 Chassis Tyres size Front 18¡Á7-8 PR Rear 16¡Á6-8 PR Wheel base mm 1295 Wheel tread Front mm 895 Rear mm 205 Ground clearance £¨full load/without load) Mast mm 80/85 75/85 Frame mm 100/110 Service brake Hydraulic Power unit Battery Electric motor Ironclad plates Voltage/capacity V/Ah: 48/505 Mass kg: 850 Electric motor Traction power kw: 5.5¡Á2 Lift power kw 8:
Streamlined exterior design, Buffer device for transverse steering axle, Overhead dual air filters, Integral hood, effectual in heat insulation and noise reduction. Technical data : 1KG=2.2LB 1INCH=25.4MM Diesel forklift Specification(CPCD40-100) 1 Forklift type : Diesel forklift truck 2 Model : CPCD40 CPCD45 CPCD50 CPCD60 CPCD70 CPCD80 CPCD100 3 Power type : Diesel 4 Rated capacity : kg 4000 4500 5000 6000 7000 8000 10000 5 Load center : mm 500 600 600 6 Lift height : mm 3000~6500 7 Free lift height E mm 150 195 200 8 Fork size : mm 1070¡Á140¡Á50 1220, ¡Á150, ¡Á60 1220, ¡Á150, ¡Á65 1500, ¡Á160, ¡Á75 1500, ¡Á160, ¡Á80 9 Fork spread outside : 300/1200 300/1200 320/2015 420/2144 10 Mast tilt angle(forward/backward) ¡£ 6\12 6\12 6\12 11 Front overhang A2 mm 562 622 700 733 12 Overall dimensions length to face of fork A1 mm 3091 3091 3125 3592 3940 4258 13 Length with fork mm 4182 4182 4216 : 14 Overall width B1 mm 1485 1995 2245 2245 15 Mast lowered height H1 mm 2380 2500 2695 2845 16 Mast extended height H3 mm 4250 4419 4374 4297 17 Overtead guard height H2 mm 2290 2420 2565 2565 18 Min.turning radius R mm 2790 2790 2830 3450 3700 3900 19 Min.right angle aisle width X mm 3415 3415 3460 3090 3310 3540 20 Travel speed(No load/full load) Forward¢ñ km/h 15/14 28/26 28/24 28/22 28/24 21 Forward¢ò 22/20 22 Backward¢ò 15/14 23 Lifting speed(no load/full load) mm /sec 480/450 480/450 480/430 500/330 450/320 480/350 390/280 24 Max.grade ability(no load/full load) ¡£ 20/19 18/17 17/19 20 20 20 25 Max.grawbar pull KN 21 : 26 Self weight : kg 6450 6770 7050 8840 9350 11080 12860 27 Tyres Front : 3.00-15-18PR 8.25-15-14PR 9.00-20-14PR 28 Rear : 7.00-12-12PR 8.25-15-14PR 9.00-20-14PR 29 Tread Front B2 mm 1180 1470 1600 30 Rear B3 mm 1190 1700 1700 31 Wheelbase A3 mm 2000 2250 2500 2800 32 Ground clearance (No load/full load) Mast M mm 145/175 200 205/245 Frame F mm 180/195 323/343 33 Battery : V/AH 2-12V/80AH 2*12/100 2*12/100 34 Engine Model : Chinese Engine/ISUZU 35 Rated output kw /rpm 68/2000 59/2300 82.4/2000 36 Rated torque N.M /rpm 340/1400~1600 /280/1600~1800 353/1650 415/1400-1600 37 No.of cylinder : 6\4 6\6 6 38 Bore x stroke mm 105*125/105*120 102*118/105*125 102*118 105*125 39 Displacement L 6494/4156 5.785/6.494 5.785 6.494 40 Fuel tank capacity L 90 140 140 41 Transimis sions Type : Hydraulic Hydraulic Hydraulic 42 Shift Front/rear : 2\1 2\2 2\2.
