Fabric specs: NN-80 ~ NN-630Belt width(mm): 300~2600Nylon is one of the best quality synthetic fibers that the rubber industry use nowdays. The nylon canvas is woven by nylon fibers both in warp and in weft, it is most widely used fabric in rubber industry, and its outstanding merits are high abrasion resistance, high tensile strength and good fatigue.
It works to carry speedy of box, package, jug bag and like this loose or in packs. It can use fixed height or adjustable units. It can be speed adjustable according to customer need. The belt selection is made according to type of product which will carry. It can select pvc, rubber and wire belt types. We can produce speacial manufacturing for desired sizes. Standart Wides A) 300 mm B) 450 mm C) 600 mm D) 800 mm Standard length : 1000-6000 mm Special length : 6000- 60000 mm
It is assumed pick-up will be performed with: - Transported material: powder or fluent plastic granules; - Apparent specific weight 0.7 kg/dm³; - Initial pick-up length having inclination α = 0° and α = 30°; - Rotary spiral with 580 rpm (930 rpm applications are also possible). Load capacity from 120 kg/h-10,000 kg/h.
Materials: stainless steel wire, steel wire, galvanized iron wire, polyester fiber, etc. Weaving and characteristics: conveyor belt can be made into different types, including chain link type belt mesh, balanced weave, reinforced and other types offering different mesh opening and features. Uses: conveyor belt mesh is used widely in heat condition, food processing, pharmacy, glass printing and some special equipments. 1 belt per pack or carton.
Conveyer belt Per container
It can be used as core of various fabrics, plastic canvas rope of steel cord conveyor belt and the decision between the canvases. No.2 Product advantages: 1. High efficiency, low labor intensity, light in weight, applicable to different types of environment; 2. Unique domestically, advanced internationally. No.3 Technical parameters: 1. Power supply: voltage 380V 50Hz; 2. Power: 3 KW; 3. Weight: 96 kg; 4. Applicable Range: EP, NN, and the joint layers of cotton & canvas layered. No.4 Method of usage: 1. Firstly, please peel off about 15cm width steel wire at the end from the wire rope conveyer belt. Remove off rubber from the both sides, and then fixed the adhesive tape. 2. Secondly, please install the up and down blades, and put the down blade right on the wire rope center, and adjust the pressure of the bolt, and then press the handles, and connect the wire rope with drag machine to work, and bring along the blade to make the rubber layer disengage from the rope, and the end of stripping. Wooden cases
1. Vulcanization pressure: 0.2 Mpa; 2. Vulcanization temperature: 145 centigrade degree; 3. Difference in surface temperature of vulcanized plate: í+ 5 centigrade degree; 4. Calefactive time (at normal temperature to 145 degree): í_30 mins; 5. Power supply voltage: 220V, 380 v, 415V, 440V, 550V, 660V. 50Hz; 6. Output power of Electronic Control Box: 7.5 KW; 7. Temperature adjustment range: 0 to 200 centigrade degree; 8. Timing adjustment range: 0 to 99 mins; Wooden cases
No.1 Usage: The Conveyor Belt Misalignment Switch is used for detecting the deflection value and distortion of the belt. It keeps the edge of belt from damaging and the material leakage due to deflection of the belt. It is a kind of protective switch that outputs alarm and shutdown signals automatically. No.2 Working Principle & Structural Characteristics: The misalignment switch has two level active function. The first level is used for alarm; The second level is used for shutdown automatically. As the belt conveyor running, if the belt is deflected and contacts the vertical miller of the switch at the same time, vertical miller rotates itself, as the deviation increases, and the vertical miller will be squeezed to deviate. When the deflection angle is over 12íp, the first-level works and outputs alarm signal. When the deflection angle is over 30íp, the second-level works and outputs shutdown signal. The first level switch is used for alarm. It connect the signals with adjusting deflection device, it can realize the function that there is no need shutdown but to adjust automatically. The second-level is used for shutdown. If connect the signals with control lines, it can be realize the function that it will stop as serious deflection of the belt. After eliminating the obstacles, the belt will depart from the vertical miller and it will be restore automatically. In order to adopt the long-term outdoor usage, the product is adopted integrated closed technics. And the inner accessories are adopted vulcanization technics. The outside accessories except the shell are adopted multi-layer chromeplate technics. The shell is adopted casting aluminum, and the surface adopts electrostatic spraying technics to adapt the usage in bad environment. Main Technical Index Ambient temperature 40 ípC to +60 ípC Relative temperature not more than 90% Atmospheric pressure 80 ~ 110 Kpa Altitude not more than 2,000 M Useful time the switch 10,000 Insulation voltage AC1000V, testing one minute Wooden cases
Conveyor Belt Type: nylon/ EP/ canvas / heat-resisting /cold resistant / oil proof / Acid & alkali resistant/ inflaming retarding /sidewall / endless belt / rubber water stop /PVC &PVG / more than 30 type specific molds and so on. 1. Plies: 1-10ply 2: width: 100-3000mm 3. Thickness: 3-50mm 4. Tensile Strength: 9-25MPA 5. High-performance characteristic: resistance to abrasion 6. ISO9001: 2000 Quality Management System authentication Bearing is sealed type, dust resistance and maintenance-free. working time can reach to 12000hours with high loading capacity. By waterprof cloth or as per requested
CWP Machinery manufactures spiral conveyors in various diameter, various length, and various types according to the purpose from carbon steel or stainless steel materials. Chain Conveyors It is used for the high capacity transport of the granule materials in narrow space, in short or long distance. It usually operates in the galleries of the underground mining firms. It is durable through its driving gear, pads, and conveyor chutes of high quality steel against corrosion.
Conveyor system
Rubber conveyor belt manufactured from nn, ep, cotton fabric upto 1200mm width in many qualities such as General purpose quality Heat resistant, Super heat resistant Fire proof Food grade etc. Top/ bottom cover tickness - 2mm to 10mm Grades - m - 24, n - 17, etc Hdpe fabric export packing or wood packing as required by buyer
Hr (heat resistant) grade conveyor belt As per indian standards : Is 1891(part ii) Characteristics : 1 - heat and abrasion resistant belt. 2 - tuffline hr grade rubber conveyor belt withstand high temperature ( upto 125¦c ) which is required in high temprature material transfer in steel plants, mines, hot mix plants etc. Applications - : Recommended for conveying hot, highly abrasive materials transportation, the special technology heat resistant rubber compound is used to protect conveyor belt top/bottom cover surface from damage due to heat in material. Carcass & general information : Cotton, ep, nn, etc, maximum width - 1200mm, can be manufactured as per buyers specific requirement ep & nn fabrics are very light in weight as compared to cotton or other fabrics resulting in maximum strength and cost factor, we offer very competitive prices and best quality, best laue for money offer For any special requirement please contact our sales team Hdpe fabric packing or as required by buyer
General purpose nylon conveyor belt of any thickness upto 1200mm width, open edge or moulded edge, best quality, minimum price General purpose nn conveyor belt As per indian standards : Is 189 Characteristics : 1 - friction and abrasion resistant belt materials. 2 - tuffline general purpose rubber conveyor belt Applications - : Recommended for conveying highly abrasive materials transportation, the special technology rubber compound is used to protect conveyor belt top/bottom cover surface from damage due to friction in material, steel pallets, iron ores or other ores etc. Carcass & general information : Nn nylon fabric, maximum width - 1200mm, can be manufactured as per buyers specific requirement nn fabrics are very light in weight as compared to cotton or other fabrics resulting in maximum strength and low cost factor, we offer very competitive prices and best quality, bestquality for money offer For any special requirement please contact our sales team Hdpe fabric packing
We manufacture and install complete feed mill plant for cattle and poultry, which includes auto-batching units, hammer mill, feed mixers, pellet dies, pelleting machines, auto-bagging units, screw conveyors and related installation equipments. Pls send us the capacity requirement for weight, dimension
Is standards : Is 1891(part i), bs 490(part i), din 22102ipss-2-03-006 Application characteristics : òhigh tensile strength in abrasion and cut resistance. òfor transportation of highly abrasive materials in bulk. Recommended for : These belts are widely used for transportation of coal, cement, coal, limestone, fertilizers, sand, soda, ash, chips, bauxite, iron ores, etc. Applicaton - For transportation & conveying of highly abrasive materials like lime, coal, mineral ore, cement handling sugar & fertilizer industries. Bags handling. Thermal powder stations. Foundry, food grains handling, gravel, crushed stones etc Reinforcement material : Ep or as required by buyer, top and bottom covers are made of m-24 rubber material but carcass can be as per customer requirement. Maximum width - 1200mm Top cover - 10mm Bottom cover - 5mm Plies - 1 to 10 Contruction cut edge or moulded edge Ends - open ends or endless Hdpe fabric or wooden box as required by buyer
Pu conveyor belt.
Because the cotton-canvas , nylon or ep-canvasas the carcass, the belt has good elasticity, excellent trough ability, and low enlongation.The rubber cover, which is made from chemical resistant materials, has fine anti-chemical corrosiveness and very good physical properties.It can convey materials ph4-10. It is suitable for conveying materials with chemical corrosiveness in chemical factory, chemical fertilizer factory, paper mill, mining industry etc. Length:20-400m Package:no more than 400mtrs/roll Width:300-1800mm
Lambton machinery counterflow process is the refined technology of exposing processed product to an upward moving stream of ambient airflow. The cooler works on the principal of blowing air through columns of hot & moist pellets, which results in evaporation of moisture from the pellets. For moisture evaporation, heat is taken from the pellets leading to cooling of pellets. The product just entering at the top of the cooling chamber is exposed to the warmest air available within the cooler minimizing temperature shock. The product exiting the bottom of the unit is cooled to within 5-10ípof the ambient air temperature. The product and air have opposite flows the gradual heat transfer greatly enhances the product quality and reduces stressing and fines. To achieve the required cooling effect, pressure and volumetric flow rate of air, length of column and the residence time will play an important role Counterflow coolers are available in either a rectangle, square or circular cooling chamber design the circular design enables product to be evenly distributed throughout the unit, increasing cooling uniformity. The round design eliminates all poorly filled corners. Most system installations encounter limited space situations while counterflow coolers provide invaluable versatility in system design. Counterflow cooler is in its highly efficient design which produces a uniformly cooled product with a low operating and installation cost compared to other conventional type coolers. ---material and cool air is in reverse direction, so that the pellet can become cool quickly and equally. ---discharge with slide valve so that volume can be adjusted to smooth discharge ---a probe level is installed ---the temperature of cooled material is under 37.4-41 ---efficient, trouble-free, and affordable cooling ---improved moisture control and low-shock, tempered cooling.
Lambton drag conveyor is widely used in horizontal and inclined drag conveying of different materials. It includes: --horizontal drag conveyor --inclined drag conveyor --self-cleaning drag --conveyor Lambton ensures the high quality and low cost of horizontal and inclined conveying machines whose capacity can be up to 1500t/h. Head and boot features: --high duty roller bearing --screw tension structure --big cleaning door --high duty wearable dust seals --spare liner for bottom and side plate Trunk features: --pre-assembled section: long distance, high standard --trolley of super antifriction material --spare liner for bottom and side plate Chain and scraper: --high duty roller chain --super antifriction scraper ensures smooth running
