Crane a german brand new stock clothes. Can sort all seasons separate. 6.5 eur/kg.
125*100*580,suit for crane cylinder
Geared Monorail Travelling Trolley Travelling Troley Side View Front View Dimensions, Weight and Performance Data Push 500 Push/Geared Geared Geared Capacity kg 1000 3000 5000 10,000 Inside of wheel flanges mm Range 1 50-130 58-150 90-160 110-150 140-170 Range 2 140-200 150-210 160-220 160-210 180-210 Range 3 210-305 210-305 220-305 215-265 215-245 A Seat of susp, plate to runner tread Range 1 & 2 mm 75 89 110 84 137 Nominal 1.5 mm clearance to be allowed from edge of track flange to inside of wheel flange (3 mm overall on both side) Overall width of geared travel trolleys - J + (1/2 x track width) + G. On 500 to 2500 Kg. units when using the narrower track widths the cross bolt adjusting washers are to be assembled such that the end of the cross bolt is clear of the hand chain wheel. Weight of trolleys only exclude hand chain. Hand chain is 0.45Kg/m per linear length up to and including 2t capacity. Bottom of hand chain loop is 460 mm from ground level. Pusher bar fixing holes provided in all models. Anti-tip stop fitted to all hand geared versions. Buffers available as on option.
Specification Model HSH 3/4 HSH 1-1/2 HSH 3 HSH 6 Capacity ton 0.75 1.5 3 6 Lift m 1.5 1.5 1.5 1.5 Test load ton 1.125 2.25 4.5 7.5 Min. distance between hooks: mm 303 365 485 600 Pull on lever to lift full load kgf 20 21 33 35 No. of load chain falls mm 1 1 1 2 Diameter of load chain mm 6 7 10 10 Length of lever handle : D mm 290 410 410 410 Dimensions mm A 139 174 200 200 B 84 108 115 115 C 153 160 185 230 Net weight kg 7 11 20 30
Multipurpose, Portable, Universal, Gearless, Hand operated Pulling and Lifting machine, Supplied complete with telescopic, operating handle and standard Length of super flex steel fibre-mixed core wire-rope fitted with Hook or Shackle at one end and fused and tapered at the other end. Pulling & Lifting Machines Hy-Tack XL Series 2005 Technical Specifications HT-7 HT-13 HT-20 HT-35 HT-58 Dimensions (Approx.) 515 x 265 x 110 600 x 360 x 155 620 x 360 x 155 720 x 400 x 160 810 x 465 x 190 Capacity (SWL) (kgs) Lifting, Pulling 750, 1250 1600, 2600 2000, 3000 3200, 5200 5000, 8000 Length of Telescopic operating handle (Approx.) 54/72 cm 66/104 cm 70/130 cm 79/118 cm 120/145 cm Effort at full load (Approx.) kgs 40 50 50 60 70 Rope travel per Return stroke (Approx.) mm 40 55 50 36 30 Diameter of wire Rope (mm) 8.0 11.3 12.0 16.3 20.0 Standard Length with Each machine (meters) 10 20 20 10 10 breaking Load of wire rope (Approx.) 4.5 Tons 9.0 Tons 10.0 Tons 18.0 Tons 24.0 Tons Exclusive Features Casing: Made from CRC sheet (Galvanized) or Graded Aluminium for light weight a high factor of safety. Jaw: Made from Special Alloy Steel, Accurately Machined, so as to avoid slippage of wire rope. Jaw Limits: Are made from special steel & heat treated for greater strength. Hooks / D-shackles: Fitted with Alloy steel Forged Hooks or D-shackle to make it feasible to be able to fit it at any place. Wore Ropes: Super flex Steel Fiber -mixed are, manufactured as IS. 226. Accepted & Widely used by Railways Mines and Quarries Navigator Electricity Board’s Dockyards Road Transports Heavy Industries etc. Increase of Pulling and Lifting Power: Lifting - machine anchored above load
Manufactured in ISO 9001:2000 Certified Company Assured quality and Interchangeability of parts Truely Modular Construction Easily accessible separate brake, motor, drum, gear box & panel unit. Seamless Pipe Accurately Machined rope drum. Long Life. Unique and sturdy rope guide Arrangement Prevents rope slackening and easy change of rope. Precision Machine Cut case-Hardened Alloy steal gears. Noiseless Operation Long life Fail safe Disc Brake Trouble free operation and ease of adjustment Built in Control Panel with Std. Electricals Ready to use
Specification Method of use Rated volt(V) Input(w) Rated lifting weight(kg) Lifling speed (m/min) Lifting height (m) Quon/CTN (Pcs) Pocking dim-ension(cm) G,W,/N,W, (kg) HGS-B100-12 PA2OO Single-hook 220/230 450 100 10 12 2 46X36X16 24/22 Double-hook 200 5 6 HGS-B125-12 PA25O Single-hook 220/230 500 125 10 12 2 46X36X16 25/23 Double-hook 250 5 6 HGS-B150-12 PA3OO Single-hook 220/230 550 150 10 12 2 46X.36X16 26/24 Double-hook 300 5 6 HGS-8200-12PA4OO Single-hook 220/230 750 200 10 12 2 52X41X17 35/32 Double-hook 400 5 6 Single-hook 220/230 900 250 10 12 2 52X41X17 36/33 Double-hook 500 5 6 Single-hook 220/230 1050 300 10 12 2 52X41X17 37/34
Used tower crane 2013 model 63m height (huh) 60 m JIB
QDY bridge foundry crane with hook is mainly used at the place where the molten metal is liftedThe working class of the complete machine is A7,and thermalprotective coating is added at the bottom of the main girderThe assembling and test of the crane conform to the document No.ZJBT[2007]375 which was issued by General Administration of Quality Supervision,Inspection and Quarantine of the PeopleS Republic of ChinaThe place where molten nonmetal material and red-hot solid metal is lifted also can refer to this document
The KBK flexible suspension crane is constituted by KBK track, electric chain hoist and installation components. The KBK suspension crane can be a very simple equipment with 2 straight rails, also can be very complex suspended monorail system. KBK flexible suspension crane has simple operation of manual operation also has complex operation such as automatic system operated by compute integrated control.
QDY bridge foundry crane with hook is mainly used at the place where the molten metal is liftedThe working class of the complete machine is A7,and thermalprotective coating is added at the bottom of the main girderThe assembling and test of the crane conform to the document No.ZJBT[2007]375 which was issued by General Administration of Quality Supervision,Inspection and Quarantine of the PeopleS Republic of ChinaThe place where molten nonmetal material and red-hot solid metal is lifted also can refer to this document
It is known that swaying is a big problem for safety and efficiency operation of overhead cranes and gantry cranes. To this end, Yuntian develop advanced crane anti-swing control system for the cranes through the establishment of the precise load swing movement mathematical model. This anti-swaying system of cranes controls the traveling speeds of the crane and trolley to eliminate load swing by 95%.
Casting Crane is one of the main equipments in the continuous casting technology of steelmaking. It is mainly used for pouring melted iron from additive bay of converter to converter; lifting molten steel from refining bay to refining furnace or lifting molten steel from molten steel bay to ladle turret of continuous casting machine.
LDA Sinlge Girder Overhead Crane is widely used in plants warehouses, material stocks to lift goods. It is prohibited to use the equipment in the combustible, explosive or corrosives environment. LDA Sinlge Girder Overhead Crane has two operational methods, ground or operational room which has open model and closed model and can be installed on left or right side according to the practical situation. And the direction of entering the gate has two forms, sideway and ends in order to satisfy the users' Choice users' different conditions.
Single girder cranes are a type of overhead crane that are common in production, engineering and many other workplaces as they cater to practically any lifting application.
Single girder overhead cranes get their name from the fact that they utilise just one beam, as opposed to two. As such, they are typically designed to carry lighter loads than double girder models.
LDA Type1-5T Overhead Mobile Hoist Crane is ameliorated and designed on the basis of LD type single beam overhead crane. The hoisting mechanism is the hoist which is running at the I-steel under the main girder. The obvious feature is an ingenious structure and easy to maintain. It is used CD/MD model electric hoist as a lifting mechanism.
ingle Girder overhead crane has the advantages of rational structure and strong rigidness of whole unit which will be used together with electric hoist in the operation. They are applicable to the transfer assembly, check and repair as well as load and unload at mechanic processing workshop, subsidiary workshop of metallurgical mills, warehouse, goods yard and power station. They can also be used instead of common double-girder overhead crane at production workshop in light textiles or food industry.
Heavy Duty QD double girder bridge travelling crane are mainly consists of Girder frame, Crane travelling device, trolley as the lifting device and electrical parts, it is divided into 2 working grade of A5 and A6 according to the use frequency. Bridge adopts box welded structure, high degree of vertical and horizontal rigidity; crane travelling mechanism adopts separate drive. It has a strong beam and a stable travelling mechanism; the emergency switch can stop any movement once any dangerous happened.
Rail mounted container gantry crane (RMG crane) is mainly used to load, unload, move and stack containers in railway transship fields and large container storage yards.
