It is for forklift
Single Girder Beam Bridge Overhead Crane European type cranes have such design concepts as small dimension, light dead weight. Compared with traditional cranes, the limiting distance is minimum from hook to wall, and headroom is the lowest, which makes cranes work more close to the front, and lifting height more higher that increases effective working space of workplace. Capacity: 1ton-20ton Span: 6m-31.5m Lifing heihgt: 6m-18m Working grade: A3-A5 Working temperature: -25 to +42 centigrade Three control methods: Pendent control: A. Easy operation when obervation. B. Convenient to communication with other workers. Wireless remote control: A. Greatly improved the work efficiency. B. Keep the operator from danger. Cabin room control: A.Designed by Man-machine engineering principle B.The driver seat has adjustable height and rotation. Product classification Because single girder overhead crane divides into four types, here are the detailed information, if you are interested in any one, please let us know. LDA type single girder overhad crane is widely used in warehouse, plant, matrerial stock to lift the goods. Capacity: 1ton-20ton Span: 7.5m-31.5m Lifing heihgt: 6m-18m Working with CD1 OR MD1 electric hoist European type single girder overhead crane is compact lifing manchinery designed and manufacturing in the strict accoring with FEM and DIN standard, which is advanced technology and beautiful design. Capacity: 1ton-20ton Span: 6m-31.5m Lifing heihgt: 6m-18m Working with European type electric hoist LDP single girder overhead crane belongsto very low clearance light duty equipment. Electric hoist is at the side of the main girder, so it will increase service space of hook and reduce the cost, so it is widely used in the situation of low headroom workshop. Capacity: 1ton-20ton Span: 6m-31.5m Lifing heihgt: 6m-18m Working with CD1 OR MD1 electric hoist LX single girder overhead crane is a light duty track traveling crane with railway, which applies to be used in the matching assembling site and warehouse. Capacity: 0.5ton-10ton Span: 6m-31.5m Lifing heihgt: 6m-18m Working with CD1 or MD1 electric hoist
Consult us if you need any cheaper equipment. Cranes: grove, liebherr, kato, sany, tadano, xcmg Earthmoving: caterpiilar, volvo, case, liebherr, jcb, etc Mining: wirtgen, ciber, metso, bomag, caterpiilar, volvo, case, liebherr, jcb, We are sales agent in brazil and we have machines from more biggest construction companies!
Type Manual Passenger Elevator Capacity 06 Passengers Elevator 408 Kg Drive ACVVVF V1000 made in Japan. Speed 0.60 meter per second Car Travel G+1+2+3+4 Due to (As per Standard EN 81 Ground to First floor Travel height 3000mm.) No. of Stops 05 Floors Car Opening 05 Same side Car Enclosure S.S CABIN With LED Lights, Blower & flooring. Car Entrance PROTECTED BY M.S collapsible door with frame. . Landing Entrance PROTECTED BY M.S collapsible door with frame. Elevator well/shaft 1550 mm wide,& 1950 mm depth Overhead 4500 mm Required Elevator pit Requirement About 1500mm deep Door opening Opening 700mm wide and 2000mm height
Lever hoist 6300 Expertise is No preload required and with caged roller bearings on load sprocket.Whitte horse provide Original machine also good services after delivery machine. Lever Hoists 6300 Kg Very robust but light weight. Zinc plated grade 100 load chain. Each lever hoist is tested at 1.5 times of the rated capacity. Complied with EN 13157. Innovated & patent fused brake disc. No preload required. With caged roller bearings on load sprocket. Specifications Capacity(tonnes)6.3 No.of Falis2 Load Chain(mm)10*28 Pull to Rated Load(N)382 Proof Load(tonnes)9.5 Standard Lift(m)1.5 Net Weight(kg)26.0 Gross Weight(kg)26.6 Extra Wt Per(kg)4.7
we are sailing last 65 years material handling equipments lever hoists is also parts of material handling equipment .we suppler lever hoists 800 kg with genuine quality. Lever Hoists 800 Kg Very robust but light weight. Zinc plated grade 100 load chain. Each lever hoist is tested at 1.5 times of the rated capacity. Complied with EN 13157. Innovated & patent fused brake disc. No preload required. With caged roller bearings on load sprocket. Specifications Capacity,(tonnes),0.8 No.of Falis,,1 Load Chain,(mm),5.6*15.7 Pull to Rated Load,(N),215 Proof Load,(tonnes),1.2 Standard Lift,(m),1.5 Net Weight,(kg),5.7 Gross Weight,(kg),6.1 Extra Wt Per,(kg),0.7
Whitte horse is genuine lever hoists supplier from last 65 year. We sale always good quality or original equipment we sale all category like 3200 kg, 6300kg, 9300 kg. Lever Hoists 1600 Kg Very robust but light weight. Zinc plated grade 100 load chain. Each lever hoist is tested at 1.5 times of the rated capacity. Complied with EN 13157. Innovated & patent fused brake disc. No preload required. With caged roller bearings on load sprocket. Specifications Capacity(tonnes)1.6 No.of Falis1 Load Chain(mm)7.1*19.9 Proof Load(tonnes)2.4 Standard Lift(m)1.5 Net Weight(kg)8.0 Gross Weight(kg)8.5 Extra Wt Per(kg)1.1
Lever hoists 3200 kg Complied with EN 13157. This machine is very robust but light weight and with caged roller bearings on load sprocket. We sale only genuine and good quality. Lever Hoists 3200 Kg Very robust but light weight. Zinc plated grade 100 load chain. Each lever hoist is tested at 1.5 times of the rated capacity. Complied with EN 13157. Innovated & patent fused brake disc. No preload required. With caged roller bearings on load sprocket. Specifications Capacity(tonnes)3.2 No.of Falis1 Load Chain(mm)10*28 Pull to Rated Load(N)372 Proof Load(tonnes)2.8 Standard Lift(m)1.5 Net Weight(kg)13.6 Gross Weight(kg)14.2 Extra Wt Per(kg)2.3
Product Description Plastic Nylon Pulleys & Sheaves is the latest products developed by Jiangsu Hongfa Engineering Nylon Co., Ltd, which is mainly used in large hoist as the passive ture, to lighten the weight of itself and prolong the longevity of cable. Our pulleys are cast nylon pulley with following advantages : 1)Light weight :Reducing dead weight at the end of a boom,which provide mobile cranes with greater stability and lifting capability. 2) Improved wire rope life :Self-lubricating, hardness lower than steel rope. 3) High wear resistance :8.8 times of steel, 8.3 times of copper 4) Improved the property of crane,little or non matainance. 5) Corrossion resistance: non-corrosive benefits for sea use. FRQS : 1. What's your MOQ,can you accept small order? Yes,we can accept trial orders.Generally the MOQ is 200 PCS. 2.Do you inspect the product? How? Yes,each step of production and finished products will be carried out inspection by QC before shipping.100% qualified products handing to you. 3.What's your payment term? We aceept T/T,Western Union,MoneyGram,etc. 4.Can you accept customized color? Yes,the style,size,texture,and color,all can be customized as your require. 5.Do you provide OEM service ? Yes, we can custom as per your drawing or sample .
CD1/MD1 Model CD1, MD1 Electric Wire Hoist is a small-sized lifting equipment, which can be mounted on single beam, bridge, gantry and arm cranes With slight modification, it can also be used as a winch It is widely used in factories, mines, harbours, warehoused, cargo storange areas and shops, essential in raising working efficiency and imporving working conditions. Model CD1 Electric Hoist has only normal speed, which can satisfy normal application. Model MD1 Electric Hoist Provides two speeds: Normal speed and low speed. At a low speed, it can do precise loading and unloading, mounding of sand box, maintenance of machine tools, etc. Note: A. The standard lifting height is 6, 9, 12, 18, 24, 30 and 36 meters. B. The lifting speed can be single speed or double speed, even multi-speed with frequency inverters. C. The suitable rail for the low-headroon hoist is H-type rail, and l-type rail is also available. D. The recommended rope reeving of this kind of hoist is 2/1, 4/2 or 4/1. E. The normal travelling speed is 20m/min, and 12.5, 16, 25, 32m/min by request. F. The normal rial gauge of the double-girder hoist is 1200, 1500, 1800, 2100 and 2300mm. The mornal travelling speed of this kind of hoist is 20m/min, and 30, 45m/min by request Wooden case
Features of product as follows: Model LD electric Double -girder Overhead Crane is widely used in machine -processing , assembly workshop ,metallurgy ,casting workshop and warehouse ,etc,for loading and unloading the goods .The configuration grap can be used in metallurgy ,cement ,chemical industry and in the open air for loading and unloading the granular items with fixed span. Technical Data Lifting capacity(t) 1,2,3,5,10,16,20 Span (m) 7.5-22.5 Mechanism travelling Speed (m/min) 10 ,20, 30 45, 60 Motor Type ZDY21-4 ZDR12-4 Power(kw) 2*0.8 2*1.5 Speed (r/min) 1380 1380 Electric Hoist Model CD1/MD1 Lifting height 6,9,12,18,24,30 Lifting speed 8(7);8/0.8(7/0.7) Traversing speed 20,30 Work Classification A3-A5 Power supply(v,Hz) 200V-600V ; 50Hz Dia of wheel(mm) Ø300 recom mended rail P18 ,P22,P24,P30
Features of product as follows: Model LD electric Single -girder Overhead Crane is widely used in machine\ processing ,assembly workshop ,metallurgy ,casting workshop and warehouse ,etc,for loading and unloading the goods .The configuration grap can be used in metallurgy ,cement ,chemical industry and in the open air for loading and unloading the granular items with fixed span. The Technical Data : Lifting capacity (Ton) / / 1/2/3/5/10/16/20 Span (M) 7.5-22.5 Mechanism travelling Motor Speed (m/min) 10/ 20/ 30 45/60 Type ZDY21-4 ZDR12-4 Power (kw) 2*0.8 2*1.5 Speed (r/min) 1380 1380 Electric Hoist Model CD1/MD1 Lifting height(m) 6/9/12/18/24/30 Lifting speed(min) 8(7);8/0.8(7/0.7) Traversing speed(m/min) 20/30 Work Classfication / / A3-A5 Power supplier (V ;Hz) / / 200V-600V;50Hz Dia of wheel(mm) ø300 Recemend mended rail / / P18/P22/P24/P30 The advantages: 1.Safety but efficiency 2.Simple control but durable 3.More favourable price ,No the third party 4.Be available according your requirement 5.Be available with more capacity :1T-100T KF CRANE is a professional production of heavy overhead crane manufacturer, overhead crane was hung in workshops, warehouses and material lifting field empty for material lifting equipment. Because of its ends situated in the tall concrete pillars or metal stent, shaped like a bridge.
Product introduction The double-beam crane main beam by a wide variety of steel welded, the structure is very complex. There are some problems that cause main beam deformation, such as the thin structure, needs to be improved. This paper combined with the finite element model of plate and beam to solve analytical challenges. Determine the dynamic load impact factor, the finite element analysis of the double-beam crane box-type structure of main beam, on the basis of the above, and the main beam finite element computer simulation reinforcement of the four program design and to compare. The strength of the best programs 38.7% higher than the original beam and stiffness 33.9% higher than the original beam. Product model and Application 1. QD model 5-50/10t overhead crane with hook is mainly composed of bridge, running gear of crane, trolley and electrical device, etc. It is divided into two working classes: A5 and A6 according to the use grade and load-up condition. 2. There are three kinds of method for entering the platform of cab: from the side, from the end and from the top. The figure is the side entrance; arrowhead Ashows the end entrance; the top entrance is at the place there is no door. 3. The figure shows that the cab is mounted at the left end. 4. Safe slide wire or angle iron can be used for electric conduction of the crane; it can be either at the opposite side of the cab (same as the figure) or at the sameside of the cab. 5. Operation of the crane shall be finished in the cab completely. 6. Ho is the in creased height of buffer of the crane, H0¡¨¹250. KF CRANE is a professional production of heavy overhead crane manufacturer, overhead crane was hung in workshops, warehouses and material lifting field empty for material lifting equipment. Because of its ends situated in the tall concrete pillars or metal stent, shaped like a bridge. Plywood Case
Product Detail European-style Gantry Crane is the most popular & common crane which is widely used in workshop, warehouse, etc. Its outstanding advantage is DIN/FEM design, light weight design, modular design, advanced manufacturing technology, high security, high reliability, low-energy & free-maintenance and intelligentize. European type gantry crane are mainly consists of Girder frame, Crane travelling device, hoist as the lifting device and electrical parts, it is designed with working grade of A5~A8 according to the use frequency. Bridge adopts box welded structure, high degree of vertical and horizontal rigidity. It has a strong beam and a stable travelling mechanism; the emergency switch can stop any movement once any dangerous happened. It is rely on the bridge frame along the workshop rail direction moves forward-backward, the hoisting mechanism can be hoist type or winch type according to the lifting capacity and working demand. The trolley along the main beam direction moves left-right and the hook lift up-down. Features Design and fabricate according to FEM/DIN standard --Light duty & modular design --Advanced fabricated technology --High security --High reliability --Low-energy and maintenance-free --Intelligentialize KF CRANE is a professional production of heavy overhead crane manufacturer, overhead crane was hung in workshops, warehouses and material lifting field empty for material lifting equipment. Because of its ends situated in the tall concrete pillars or metal stent, shaped like a bridge. Plywood Case
These hoists typically have lower capital costs when compared to drum hoists due to characteristic lighter, single-drum constructions and lower installed power requirements. Koepe drums are subjected to high cyclic fatigue loads, typically reversed during every drum revolution. Design is of necessity for infinite fatigue life. The head ropes of a Koepe hoist are subjected to cyclic variations in operating loads due to the required use of tail, or balancing ropes. For adequate rope life, the static load range should be limited to approximately 12 % of the rope breaking strength. Regular rope maintenance and replacement is essential on these hoists. Koepe hoists are not normally favoured for depths of wind greater than 1800 m.However, for depths within the 1800 m range, very large payloads can be handled by increasing the number of head ropes. Koepe hoists frequently find application as service hoists for men and materials using a cage and counterweight arrangement. These are often configured for use with push button cage control. Drum hoists, both single drum and double drum, are the most frequently used type of hoisting system. With multi-layer coiling the double drum hoist is frequently used for lengths of wind to 2500 meters, but can be used for lengths of wind greater than 3000 metres. Although normally winding in balance, the range of brake torque required during emergency braking requires some form of brake control system to provide acceptable retardation levels under all winding conditions. The control of emergency braking retardation for single drum hoists is particularly problematic due to the high out of balance loads and great variation in the natural rates of retardation for different hoisting conditions. KF has extensive experience in the design of suitable brake control systems. KF CRANE is a professional production of heavy overhead crane manufacturer, overhead crane was hung in workshops, warehouses and material lifting field empty for material lifting equipment. Because of its ends situated in the tall concrete pillars or metal stent, shaped like a bridge. Email:sales66@chn-crane.com Plywood Case
Product Detail MH model rail mounted single girder electric hoist gantry crane with electric hoist is applied outside warehouse or railway sideways to do common lifting and unloading works. This kind of crane is composed of bridge, support legs, crane travelling organ, trolley, electric equipment,strong lifting electric hoist. The frame adopts box-type welding mechanism. Crane travellilng mechanism adopts separate driver. Power is supplied by cable or slide wire. there are different capacity single beam gantry crane for your choice according to your different use.It's widely used in factories, workshop, shipyard, port, etc. The capacity is from 1 to 30 tons, the working class is light ISO A3 grade. All movements of the crane are controlled by pendant control or wireless remote control. Features 1. Reasonable structure, Favorable performance, low noise. 2. Smooth starting and stopping,Overload protection. 3. Convenient maintenance,Electricity saving. 4. Excellent exchangeability for parts and components. 5. Protective earthing.Main lifting motor with thermal protection. 6. Emergency switch can stop all movement when any dangerous happened. 7. Sub-assemblies characteristic are tested before assemly. 8. All cranes must be preassmebled and tested before leaving factory KF CRANE is a professional production of heavy overhead crane manufacturer, overhead crane was hung in workshops, warehouses and material lifting field empty for material lifting equipment. Because of its ends situated in the tall concrete pillars or metal stent, shaped like a bridge. Email:sales66@chn-crane.com Price:Get Latest Price Min. order:1 Piece Trade Terms:FOB, CFR, CIF, EXW Payment Terms:L/C, T/T, Paypal, Money Gram
We are a Chinese leading manufacture of hammerhead tower cranes. We are leading the development of tower hoisting machinery in china. Backed by eight factories. We can meet the leading the requirements of orders from all over the world ,with premium quality and short delivery cycle ,providing customers with the optimal building material handling solution .our hammerhead tower cranes are notable for their six outstanding advantages involving safety, efficiency operation, maintenance, installation and cost . We are a specialist tower crane manufacturer in china, and have accumulated rich experience in development and manufacture tower cranes in construction machinery industry ,Here on this page, we are introducing our hammerhead tower cranes to you this horizontal jib crane is designed to be well suited for heavy lifting duties on the most challenging worksites. The jib and counter balance jib of our hammerhead tower crane is characterized by small section and reasonable stress. The jib tie rods come with unique installation method that ensures easiness stability.. Safety and labor efficiency in installation. These characteristics enable the balance crane to match the needs of city cranes In addition, Our hammerhead tower cranes boast higher safety and reliability as well as long service life. Low transportation cost and high cost efficiency. To know more information about this hoisting machinery please check from following pages.
Technical data: Modelpower supplyair supplypowermain lifting capacitymain lifting heightsecond lifting capacitysecond lifting height Gs35ms380v/3ph or 220v/1ph6-8kg/cm22.2kw3.5t330-1850mm3.5t450mm Gs40ms380v/3ph or 220v/1ph6-8kg/cm22.2kw4.0t330-1850mm4.0t450mm Gs45ms380v/3ph or 220v/1ph6-8kg/cm22.2kw4.5t330-1850mm4.5t450mm Gs55ms380v/3ph or 220v/1ph6-8kg/cm22.2kw5.5t330-1850mm5.5t450mm
Technical data: Modelpower supplyair supplypowermain lifting capacitymain lifting heightsecond lifting capacitysecond lifting height Gs35m4380v/3ph or 220v/1ph6-8kg/cm22.2kw3.5t330-1850mm2t375mm Gs40m4380v/3ph or 220v/1ph6-8kg/cm22.2kw4.0t330-1850mm2t375mm Gs45m4380v/3ph or 220v/1ph6-8kg/cm22.2kw4.5t330-1850mm3t375mm Gs55m4380v/3ph or 220v/1ph6-8kg/cm22.2kw5.5t330-1850mm3t375mm
Technical data: ModelPower supplyAir supplyPowerMain lifting capacityMain lifting heightSecond lifting capacitySecond lifting height Gs35m380v/3ph or 220v/1ph6-8kg/cm22.2kw3.5t330-1850mm2t375mm Gs40m380v/3ph or 220v/1ph6-8kg/cm22.2kw4.0t330-1850mm2t375mm Gs45m380v/3ph or 220v/1ph6-8kg/cm22.2kw4.5t330-1850mm3t375mm Gs55m380v/3ph or 220v/1ph6-8kg/cm22.2kw5.5t330-1850mm3t375mm
