Belt conveyer is a kind of machine that to transfer the material continuously. The belt works under the effect of frictional force. It is not only the components to transfer the material, but also the components to transfer the force.
The belt conveyer is advanced and simple in structure, easy to maintain. Its transfer capacity is high, transfer distance is long. They are widely used in mining, metallurgical and coal industry to transfer sandy or lump material, or packaged material. In many situation, it Is a very important component of nonstandard machinery.
We can Provide the following Productions:
General Conveyor Mechanism
Horizontal Curve Conveyor Mechanism
Mobile Conveyor Mechanism
Pipe Belt Conveyor Mechanism
Screw Conveyor Mechanism
Conveyor Rubber Belt
General Steel Cord Conveyor Belt
Horizontal Curve Conveyor Mechanism
LK18 series cam master controller is suitable for the electric transmission devices of 50hz 380v ac and 220v dc, and used for the remote control of control station by changing the control circuit.
1) The separable design for hopper from main machine,safe and convenient
2) Stainless steel hopper,light-weighted,durable,easy for cleaning
3) Overload protection device on motor
4) Computer control,easy for operation.
5) Independent filter,convenient for cleaning accumulated dust
6) Noise-free design
7) Auto-alarming buzzer protection device for material shortage
Hsz-hand chain hoist series is a manual lifting which is simple to use, a wide range of usage, and is portable, it can be used in factories, mines, agriculture, electricity, construction, shipside, docks, storage for machines be installed, the lifting of the goods, such as loading and unloading of vehicles, particularly applicable to the operations in the open air and no power.
Digidale volumetric screw feeder working with the principle of mechanical fluidisation and guarantees the problem free discharge in continuous as well as precious batch operation of granular and powdery product such as flour, milk powder, salt, starch, flakes, coal, pallets, bentonite, washing powder and agglomerates etc.
The volumetric screw feeder has only five moving parts, drive, coupling, screw and two bearings and it is virtually maintenance free. An agitator/conditioner screw available in all feeders fills the screw completely resulting in desired feed accuracies.
Silent running minimal noise pollution
Efficient enclosure for dust/security/contamination/spillage/weather
Minimal degredation of materials due to no movement of transported products
Steeper incline possible for most materials
Higher speeds possible
Cost saving in outdoor applications
Reduced structural and civil costs
Power consumption reduced
Neat profile
Minimised maintenance
Protection of personel from moving parts
Increased belt life
Air generated from a low pressure centrifugal fan
Air can be conditioned to suit the product
Available in mild steel, 3cr 12, 304/316 ss and aliminium
Suitable to convey most products
Ease of erection
22 years of proven design, success and reliability
Reduction in support tressles, unsupported span of 12 metres and up to 36 metres in certain applications
After sales service, on site maintenance contract available
Well suited for use as a reversable or a shuttle conveyor
Ideal for conveying precious materials (security)
The aerobelt is an 'air cushion belt conveyor'. In this system the belt is carried on a film of air. Air is blown into the plenum chamber through sections by a small fan. One fan is sufficient for over a hundred metres of belt conveyor.
Duct-Baling-Press TypeBP 4000 V / 19,5
This press is excellent qualified for low-cost disposal of various kinds of waste material. The press can work under continuous feeding and will work very profitable. The press operates with a fully automatic system of bale binding device. Depending on the high compression, bales of pulp, paper, compounds, blister packs and foils can reach a bale package density up to 400 kN. Extremely rugged construction with high reliability. The feeding will be handled in accordance to the local requirements. The control will be fully automatic by photoelectric barrier.
Technical Data:
Drive:..................................19,5 kW/400 V/50 Hz
Pressure:...............................400 kN/m¦
Volume/stroke:.....................1,0 m¦
Cycle time:............................28 sec
Feed opening:......................1350x820 mm
Bale dimensions:..................800 x 900 x 600
..............................................1.200 mm
No of tightening wires:..........4
Press length:.........................5750 mm
Press width:..........................2050 mm
Press height with funnel:......1925 mm
press height complete:.........2360 mm
Weight:..................................6100 kg
FAKT BP 5000
This press is excellent qualified for low-cost disposal of various kinds of waste material. The press can work under continuous feeding and will work very profitable. The press operates with a fully automatic system of bale binding device and a three-sided duct cross sectional adjustment device. Depending on the high compression, bales of pulp, paper, compounds, blister packs and foils can reach a bale package density up to 600 kg. Extremely rugged construction with high reliability. The feeding will be handled in accordance to the local requirements. The control will be fully automatic by a photoelectric barrier.
Technical Data:
Drive:...................................35 kW/400 V/50 Hz
Pressure:..............................600 kN/m¦
Volume/stroke:....................1,3 m¦
Cycle time:...........................19 sec
Feed opening:......................1350 x 1160 mm
Bale dimensions:.................1100x750x600
.............................................1.200 mm
No of tightening wires:..........4
Press length:.........................6850 mm
Press width:..........................2650 mm
Press height with funnel:.....2150 mm
press height complete:........3700 mm
Weight:..................................14600 kg
Basic equipment
- Touchpanel
- photocell control
- bale longimetry
- fully automatic three-sided duct cross sectional adjustment device
- free pitching device
- fully automatic binding
- 4 pieces wire coil stands large
- 4 pieces wire bags for 40 kgs spools
- electric control ready to plug in (SPS Siemens)
engineering und documentation
space assignment plan
plans of electric control
operation manual
security instructions
SBP 200
This cabinet bale press has a large filling volume with easy filling due to a large filling opening. Knuckle-joint press pistons with thrust-twist motion for pressing operation. Simple operation due to two-hand-handling absolutely safe. Hoop band positioned visibly and easy to change. This system has a bale ejection aid.
This press enables a trouble free operation due to the compact and strong construction.
Technical data:
Pressure:............................200 kN/m2 - abt. 20 t
Drive:..................................4,0 kW/400 V/50 Hz
Cycle time:..........................40 sec.
Feed opening:.....................1200x700 mm
Bale dimensions:................1200x700x500
..........................................up to 800 mm
weight of bale:.....................50 up to 200 kg
press length:.......................1990 mm
press width:........................1360 mm
press depth:........................1170 mm
weight.................................1300 kg
SBP 100
This cabinet bale press has a large filling volume with easy filling due to a large filling opening. Knuckle-joint press pistons with thrust-twist motion for pressing operation. Simple operation due to two-hand-handling absolutely safe. Hoop band positioned visibly and easy to change. This system has a bale ejection aid.
This press enables a trouble free operation due to the compact and strong construction.
Technical data:
Pressure:............................100 kN/m2 - abt. 20 t
Drive:..................................4,0 kW/400 V/50 Hz
Cycle time:..........................40 sec.
Feed opening:......................600x600 mm
Bale dimensions:.................500x700x500.- 900 mm
weight of bale:.....................50 up to 80 kg
press length:.......................1120 mm
press width:.........................830 mm
press height:.......................2000 mm
weight.................................980 kg
Nylon is one of the best quality synthetic fibers that the rubber industry use nowdays. The nylon canvas is woven by nylon fibers both in warp and in weft, it is most widely used fabric in rubber industry, and its outstanding merits are high abrasion resistance, high tensile strength and good fatigue resistance. Conveyor belts with nylon canvas inside have the characteristics of thin belt body, high tensile strength, good shock resistance, good troughability, high adhesion between plies, splendid flexibility and long working life. Nylon conveyor belts are suitable for medium, long-distance and heavy-load transportation of materials, widely used in mining, metallurgical industry and architectural industry, ports and etc.
For the excellent and special frame, v-belt bears the features of heat resistance, oil resistance, long-life and so on. For the power, speed, long life, small distortion and occupation. Is available, the v-belts are widely used in electromotor and internal- combustion engine and power transmission of equipment.
Cotton canvas is woven by cotton fibers both in warp and in weft, its elongation is relatively low. It is good in mechanical fastening and adhesion with rubber. Converyor belt has relatively small distortion under high temperature conditions. It is suitable for shot-distance and light-load transportation of materials.
Polyster cotton conveyor belt is the up graded product of cotton conveyer belt, and its tension resistant body is woven by polyester cotton fibers in warp and cotton fibers in weft. Its comprehensive physical and mechanical characteristics are obviously better than those of cotton conveyor belt, especially the belt body is thinner and lighter, the belt had better shock tesistance and thus it has better performance and can reduce energy and material consumpution for users. It is the idea selection for medium, short-distance and medium-load transporation of matetials.
Fabric specs: cotton: cc-56
Polyester cotton: t. C-56
Belt width(mm): 300~2600
1) Widely used in construction, mining, metallurgy, chemistry and food industries, as well as power plant and ports
2) Light weight and high strength
3) Acid, alkali, heat, humidity and impact resistant
4) Good trough ability
7124 Cranes Lifts Suppliers
Short on time? Let Cranes Lifts sellers contact you.
