Bucket elevator is used to transfer the material from ground level to certain height. It consists of a cotton or rubber belt running on one drive pulley at the top and the other one is driven pulley, which is at the bottom inside a fabricated casing.
The model is a floor-to-floor incline or decline conveyor. It is equipped with an adjustable double nose-over at the discharge end to insure a smooth transfer from incline or decline to horizontal plane. Detailed product description: Incline belt conveyor of china Bed - stainless steel galvanized carbon steel aluminum section Belt widths: 50-1200mm End drive (standard) Driving mode motor reducer Adjustable floor supports available Reversible (with center drive). Belt widths: 50-1200mm End drive (standard) Driving mode motor reducer Adjustable floor supports available Reversible (with center drive).
Thickness:2mm Width:1 metre Diameter:60mm Double Bearing Available in different sizes and dimensions.
Belt Conveyer Belt conveyer is a kind of machine that to transfer the material continuously. The belt works under the effect of frictional force. It is not only the components to transfer the material, but also the components to transfer the force. The belt conveyer is advanced and simple in structure, easy to maintain. Its transfer capacity is high, transfer distance is long. They are widely used in mining, metallurgical and coal industry to transfer sandy or lump material, or packaged material. In many situation, it Is a very important component of nonstandard machinery. We can Provide the following Productions: General Conveyor Mechanism Horizontal Curve Conveyor Mechanism Mobile Conveyor Mechanism Pipe Belt Conveyor Mechanism Screw Conveyor Mechanism Conveyor Rubber Belt General Steel Cord Conveyor Belt Horizontal Curve Conveyor Mechanism
AC cam controller LK18 series cam master controller is suitable for the electric transmission devices of 50hz 380v ac and 220v dc, and used for the remote control of control station by changing the control circuit.
All kind of bearing housing.
Features 1) The separable design for hopper from main machine,safe and convenient 2) Stainless steel hopper,light-weighted,durable,easy for cleaning 3) Overload protection device on motor 4) Computer control,easy for operation. 5) Independent filter,convenient for cleaning accumulated dust 6) Noise-free design 7) Auto-alarming buzzer protection device for material shortage MainBody (Hí-Lí-W) Hopper (Hí-Lí-W) RAL-300 550 í-450í-300 450 í-350í-250
Chain hoist Hsz-hand chain hoist series is a manual lifting which is simple to use, a wide range of usage, and is portable, it can be used in factories, mines, agriculture, electricity, construction, shipside, docks, storage for machines be installed, the lifting of the goods, such as loading and unloading of vehicles, particularly applicable to the operations in the open air and no power. Wooden crate
Volumetric screw feeder (doser) Digidale volumetric screw feeder working with the principle of mechanical fluidisation and guarantees the problem free discharge in continuous as well as precious batch operation of granular and powdery product such as flour, milk powder, salt, starch, flakes, coal, pallets, bentonite, washing powder and agglomerates etc. The volumetric screw feeder has only five moving parts, drive, coupling, screw and two bearings and it is virtually maintenance free. An agitator/conditioner screw available in all feeders fills the screw completely resulting in desired feed accuracies. As per customer requirment
Aerobelt features and benefits Silent running minimal noise pollution Efficient enclosure for dust/security/contamination/spillage/weather Minimal degredation of materials due to no movement of transported products Steeper incline possible for most materials Higher speeds possible Cost saving in outdoor applications Reduced structural and civil costs Power consumption reduced Neat profile Minimised maintenance Protection of personel from moving parts Increased belt life Air generated from a low pressure centrifugal fan Air can be conditioned to suit the product Available in mild steel, 3cr 12, 304/316 ss and aliminium Suitable to convey most products Ease of erection 22 years of proven design, success and reliability Reduction in support tressles, unsupported span of 12 metres and up to 36 metres in certain applications After sales service, on site maintenance contract available Well suited for use as a reversable or a shuttle conveyor Ideal for conveying precious materials (security) The aerobelt is an 'air cushion belt conveyor'. In this system the belt is carried on a film of air. Air is blown into the plenum chamber through sections by a small fan. One fan is sufficient for over a hundred metres of belt conveyor. Metres
Auto-skatewheel conveyor
Auto-telescopic belt conveyor
Auto-lifting belt conveyor
Duct-Baling-Press TypeBP 4000 V / 19,5 This press is excellent qualified for low-cost disposal of various kinds of waste material. The press can work under continuous feeding and will work very profitable. The press operates with a fully automatic system of bale binding device. Depending on the high compression, bales of pulp, paper, compounds, blister packs and foils can reach a bale package density up to 400 kN. Extremely rugged construction with high reliability. The feeding will be handled in accordance to the local requirements. The control will be fully automatic by photoelectric barrier. Technical Data: Drive:..................................19,5 kW/400 V/50 Hz Pressure:...............................400 kN/m¦ Volume/stroke:.....................1,0 m¦ Cycle time:............................28 sec Feed opening:......................1350x820 mm Bale dimensions:..................800 x 900 x 600 ..............................................1.200 mm No of tightening wires:..........4 Press length:.........................5750 mm Press width:..........................2050 mm Press height with funnel:......1925 mm press height complete:.........2360 mm Weight:..................................6100 kg
FAKT BP 5000 This press is excellent qualified for low-cost disposal of various kinds of waste material. The press can work under continuous feeding and will work very profitable. The press operates with a fully automatic system of bale binding device and a three-sided duct cross sectional adjustment device. Depending on the high compression, bales of pulp, paper, compounds, blister packs and foils can reach a bale package density up to 600 kg. Extremely rugged construction with high reliability. The feeding will be handled in accordance to the local requirements. The control will be fully automatic by a photoelectric barrier. Technical Data: Drive:...................................35 kW/400 V/50 Hz Pressure:..............................600 kN/m¦ Volume/stroke:....................1,3 m¦ Cycle time:...........................19 sec Feed opening:......................1350 x 1160 mm Bale dimensions:.................1100x750x600 .............................................1.200 mm No of tightening wires:..........4 Press length:.........................6850 mm Press width:..........................2650 mm Press height with funnel:.....2150 mm press height complete:........3700 mm Weight:..................................14600 kg Basic equipment - Touchpanel - photocell control - bale longimetry - fully automatic three-sided duct cross sectional adjustment device - free pitching device - fully automatic binding - 4 pieces wire coil stands large - 4 pieces wire bags for 40 kgs spools - electric control ready to plug in (SPS Siemens) engineering und documentation space assignment plan plans of electric control operation manual security instructions
SBP 200 This cabinet bale press has a large filling volume with easy filling due to a large filling opening. Knuckle-joint press pistons with thrust-twist motion for pressing operation. Simple operation due to two-hand-handling absolutely safe. Hoop band positioned visibly and easy to change. This system has a bale ejection aid. This press enables a trouble free operation due to the compact and strong construction. Technical data: Pressure:............................200 kN/m2 - abt. 20 t Drive:..................................4,0 kW/400 V/50 Hz Cycle time:..........................40 sec. Feed opening:.....................1200x700 mm Bale dimensions:................1200x700x500 ..........................................up to 800 mm weight of bale:.....................50 up to 200 kg press length:.......................1990 mm press width:........................1360 mm press depth:........................1170 mm weight.................................1300 kg electric control ready to plug in
SBP 100 This cabinet bale press has a large filling volume with easy filling due to a large filling opening. Knuckle-joint press pistons with thrust-twist motion for pressing operation. Simple operation due to two-hand-handling absolutely safe. Hoop band positioned visibly and easy to change. This system has a bale ejection aid. This press enables a trouble free operation due to the compact and strong construction. Technical data: Pressure:............................100 kN/m2 - abt. 20 t Drive:..................................4,0 kW/400 V/50 Hz Cycle time:..........................40 sec. Feed opening:......................600x600 mm Bale dimensions:.................500x700x500.- 900 mm weight of bale:.....................50 up to 80 kg press length:.......................1120 mm press width:.........................830 mm press height:.......................2000 mm weight.................................980 kg electric control ready to plug in
Material:q235 Length:1m 2m 3m 6m Dia:15/17mm Thread:10mm Different packing follow the client's need
Nylon conveyor belt Nylon is one of the best quality synthetic fibers that the rubber industry use nowdays. The nylon canvas is woven by nylon fibers both in warp and in weft, it is most widely used fabric in rubber industry, and its outstanding merits are high abrasion resistance, high tensile strength and good fatigue resistance. Conveyor belts with nylon canvas inside have the characteristics of thin belt body, high tensile strength, good shock resistance, good troughability, high adhesion between plies, splendid flexibility and long working life. Nylon conveyor belts are suitable for medium, long-distance and heavy-load transportation of materials, widely used in mining, metallurgical industry and architectural industry, ports and etc. Plastic bag
V-belt For the excellent and special frame, v-belt bears the features of heat resistance, oil resistance, long-life and so on. For the power, speed, long life, small distortion and occupation. Is available, the v-belts are widely used in electromotor and internal- combustion engine and power transmission of equipment.
