1.The xenon lamps be imported from u.S. It ensure that the shot time is much more than other industrial.
2.The self-priming silent pump can support for strong water cycle, and ensure the water cycle smoothly.
3.Large capacitor ensure the effectiveness of the light.
4. Pure copper heat sink, can quickly reduce the temperature.
5.Arm platform support, embedded design, the micro-computer functions, operational speed, low power consumption, and increase the customer management system.
6.The changeable filters, it can reduce the cost of customers.
7.Quick insert design, convenience operation.
8.Multiple language settings, the customer more choices
9.Set a variety of skin type parameters and custom parameters to facilitate customer choice
10. Large tft touch screen, customers easier and more intuitive to operate
Functions:
Speckle talking, capillary lesion, hair removal, skin rejuvenation
Rf energy 0 j/cm¬˜~ 50j/cm¬˜
Laser energy:15 j/cm¬˜~50j/ cm¬˜ (no light under 10j)
Input power:1700w
Wavelength:530-1200nmú¼585-1200nm, 640-1200nm
Cooling:water+ air+ semiconductor
Pulses qty:1~5
Pulses width:2ms~10ms
Pulses delay:5ms~60ms
Laser beam size:a:8mm x 40mm b:15mmx50mm
Rf frequency:3m hz
Rf power íG50w
Working noise:íG65 db
Net weight:65kg
Gross weight(wooden package):93kg
Package size(wooden package):71.5 x 151 x 61mm
Continual working time:24h
Power source:ac220-240 50hz 1.2a
Our shaving brush head was originally made from top-grade badger hair, soft quality, pure colouring, round and plump appearance, sharp point naturally straight and water retention quality; feel well; handmade purly, have many kinds of styles for you to choose.
Our shaving brush head was originally made from top-grade badger hair, soft quality, pure colouring, round and plump appearance, sharp point naturally straight and water retention quality; feel well; handmade purly, have many kinds of styles for you to choose.
Here are a few tips to help ensure the best results and long life with your iron.
1. The iron has been with an idci plug. This helps to prevent electric shocks. If the iron does not turn on when the switch is turn to the on position, be sure that the r reset button on the plug is depress. In the case of the local electrical interruption, be sure to reset the plug before using again.
2. The iron is turn on and off by sliding the conceal switch inside the hankle. The r indicator light willl tell you when the iron is in the heating mode. This light may flicker during heat cycles. Always turn the iron off when not in use.
3. The ceramic paddles may be clean of product build-up using rubbing alcohol and a clean cloth. Be sure that the iron is turn off, unpl, and cool to the touch before cleaning. Do not use abrasive cleaners or materials on the ceramic plates, as this will damage the heating surface.
4. As with any electrical appliance, keep the iron away from water. Never submerge the iron in water as it will damage the iron and void the warranty.
5. Should the hinge mechanism become loose and the plates fail to align properly, the hinge may be tighten. Unplug the iron and allow to cool. Carefully remove the caps covering the hinge. Tighten the screw inside the hinge until the plates align. Replace the hinge covers, and return to normal usage
Top quality ; lower price ; fastest shipping; best service;100% satisfaction
Here are a few tips to help ensure the best results and long life with your iron.
1. The iron has been with an idci plug. This helps to prevent electric shocks. If the iron does not turn on when the switch is turn to the on position, be sure that the r reset button on the plug is depress. In the case of the local electrical interruption, be sure to reset the plug before using again.
2. The iron is turn on and off by sliding the conceal switch inside the hankle. The r indicator light willl tell you when the iron is in the heating mode. This light may flicker during heat cycles. Always turn the iron off when not in use.
3. The ceramic paddles may be clean of product build-up using rubbing alcohol and a clean cloth. Be sure that the iron is turn off, unpl, and cool to the touch before cleaning. Do not use abrasive cleaners or materials on the ceramic plates, as this will damage the heating surface.
4. As with any electrical appliance, keep the iron away from water. Never submerge the iron in water as it will damage the iron and void the warranty.
5. Should the hinge mechanism become loose and the plates fail to align properly, the hinge may be tighten. Unplug the iron and allow to cool. Carefully remove the caps covering the hinge. Tighten the screw inside the hinge until the plates align. Replace the hinge covers, and return to normal usage
Top quality ; lower price ; fastest shipping; best service;100% satisfaction
Here are a few tips to help ensure the best results and long life with your iron.
1. The iron has been with an idci plug. This helps to prevent electric shocks. If the iron does not turn on when the switch is turn to the on position, be sure that the r reset button on the plug is depress. In the case of the local electrical interruption, be sure to reset the plug before using again.
2. The iron is turn on and off by sliding the conceal switch inside the hankle. The r indicator light willl tell you when the iron is in the heating mode. This light may flicker during heat cycles. Always turn the iron off when not in use.
3. The ceramic paddles may be clean of product build-up using rubbing alcohol and a clean cloth. Be sure that the iron is turn off, unpl, and cool to the touch before cleaning. Do not use abrasive cleaners or materials on the ceramic plates, as this will damage the heating surface.
4. As with any electrical appliance, keep the iron away from water. Never submerge the iron in water as it will damage the iron and void the warranty.
5. Should the hinge mechanism become loose and the plates fail to align properly, the hinge may be tighten. Unplug the iron and allow to cool. Carefully remove the caps covering the hinge. Tighten the screw inside the hinge until the plates align. Replace the hinge covers, and return to normal usage
Top quality ; lower price ; fastest shipping; best service;100% satisfaction
Here are a few tips to help ensure the best results and long life with your iron.
1. The iron has been with an idci plug. This helps to prevent electric shocks. If the iron does not turn on when the switch is turn to the on position, be sure that the r reset button on the plug is depress. In the case of the local electrical interruption, be sure to reset the plug before using again.
2. The iron is turn on and off by sliding the conceal switch inside the hankle. The r indicator light willl tell you when the iron is in the heating mode. This light may flicker during heat cycles. Always turn the iron off when not in use.
3. The ceramic paddles may be clean of product build-up using rubbing alcohol and a clean cloth. Be sure that the iron is turn off, unpl, and cool to the touch before cleaning. Do not use abrasive cleaners or materials on the ceramic plates, as this will damage the heating surface.
4. As with any electrical appliance, keep the iron away from water. Never submerge the iron in water as it will damage the iron and void the warranty.
5. Should the hinge mechanism become loose and the plates fail to align properly, the hinge may be tighten. Unplug the iron and allow to cool. Carefully remove the caps covering the hinge. Tighten the screw inside the hinge until the plates align. Replace the hinge covers, and return to normal usage
Top quality ; lower price ; fastest shipping; best service;100% satisfaction
The frame built from top quality billet materials, has been great heat treated and hot oil treated numerous times for protection .
The start running voltage is 3v, and the smooth running voltage is 7-9v. Runs with low temperature, strong-high performance, will not overheat even after many hours of continuous use.
Payment terms: u tt/paypal
Lead time: u 10 business days
Payment terms: u tt
Brass tattoo machine ( top tattoo machine high quality tattoo machine )
1)is made of brass material, and it is very popular for clients.
2) it works great , it won't be turn to be hot when you use it through a long time .
3) it can be according to customer's design (oem is welcome).
Treatment range:
1.Light-aging and skin rejuvenation.
2.Benign pigment problem:spots, pigmentation, fleck, etc.
3.Benign vascular problem: redden face, capillary vessel expansion and spider naevus.
4.Unwanted hair removal.
Technical specifications:
Standard handle (wavelength):560-1200nm for skin rejuvenation
695-1200nm for hair removal
Optional handle(wavelength):400-1200nm, 530-1200nm, 595-1200nm
Energy density:10-60 j/cm2
Pulse number:1-6 pcs
Pulse duration:1-10 ms
Pulse delay:5-100 ms
Frequency:1-3 hz
Spot size:8*34 mm
Cooling method:semiconductor cooling & water & wind cooling system
Weight:60 kg
Power supply:ac110v/15a/60hz ac220v/8a/50hz
*Joint part adopts the most advanced "plug and play" technology, integrating the water and electricity protection automatically, makes install more easily, safe and reliable.
*Special technique, automatic energy adjustable system
*UL standard independently adjustable three kinds of pulses design, obeying the clinic ten years experiences
*Humanized menu, easy operation
*Hand-touch, foot-touch and switches satisfy your different operating habits.
*Multilingual arbitrary languages, anywhere in the world can be easily grasped.
*Smart system clock makes the operator control time easily.
Specification
*1handle
Big handle:15*50mm with 5filter
430-1200nm for Acne
480-1200nm for age spots, sun spots, pigmentation troubles
560-1200nm for Skin rejuvenation
590-1200nm for red face, red nose, couperosis, spider veins.
640-1200nm for hair removal
*Lamp longevity:60000shots
*Energy:15-50J
*Pulse Number:1-15adjust
*Pulse Width:1.0-10.0
*Pulse Delay:1-50
*Shot period:2-5second adjust
*Display:5.5 inch Touch display
*Voltage:Only 220 V
*Power:400W
*Cooling system:Wind+water
*Certifications:FDA/CE/ROHS
*Package size:52*26*42
*Weight:20kg
We are one of the largest and the leading exporters for hair extension link system in china, oem for korea stainless steel clips and offer high quality micro rings.
Clip description
Size: 2.3cm, 2.8cm, 3.2cm, 3.8cm
Type: t type and u type
Material: korea stainless steel and general steel
Color: black, brown, dark brown, light brown, beige, flesh, etc.
Micro ring description
Aluminium size: 35*20*25, 36*24*28, 40*27*28, 45*30*28, 50*40*32, etc, any size is available.
Copper ring size: 30*24, 34*30, 28*23, 40*36, etc, any size is available.
Type: without screw, with screw, copper with edge, and copper without edge, copper with slit etc.
Material: aluminium and copper, red copper.
Color: black, brown, dark brown, light brown, beige, flesh, etc.
Other tools:
Hair extension iron
Hair straighter
Loop brush
Glue hot pot
Scissor
Glue sticks
Hair fusion connector
Needle
We are one of the largest and the leading exporters for hair extension link system in china, oem for korea stainless steel clips and offer high quality micro rings.
Clip description
Size: 2.3cm, 2.8cm, 3.2cm, 3.8cm
Type: t type and u type
Material: korea stainless steel and general steel
Color: black, brown, dark brown, light brown, beige, flesh, etc.
Micro ring description
Aluminium size: 35*20*25, 36*24*28, 40*27*28, 45*30*28, 50*40*32, etc, any size is available.
Copper ring size: 30*24, 34*30, 28*23, 40*36, etc, any size is available.
Type: without screw, with screw, copper with edge, and copper without edge, copper with slit etc.
Material: aluminium and copper, red copper.
Color: black, brown, dark brown, light brown, beige, flesh, etc.
Other tools:
Hair extension iron
Hair straighter
Loop brush
Glue hot pot
Scissor
Glue sticks
Hair fusion connector
Needle
We are one of the largest and the leading exporters for hair extension link system in china, oem for korea stainless steel clips and offer high quality micro rings.
Clip description
Size: 2.3cm, 2.8cm, 3.2cm, 3.8cm
Type: t type and u type
Material: korea stainless steel and general steel
Color: black, brown, dark brown, light brown, beige, flesh, etc.
Micro ring description
Aluminium size: 35*20*25, 36*24*28, 40*27*28, 45*30*28, 50*40*32, etc, any size is available.
Copper ring size: 30*24, 34*30, 28*23, 40*36, etc, any size is available.
Type: without screw, with screw, copper with edge, and copper without edge, copper with slit etc.
Material: aluminium and copper, red copper.
Color: black, brown, dark brown, light brown, beige, flesh, etc.
Other tools:
Hair extension iron
Hair straighter
Loop brush
Glue hot pot
Scissor
Glue sticks
Hair fusion connector
Needle
We are one of the largest and the leading exporters for hair extension link system in china, oem for korea stainless steel clips and offer high quality micro rings.
Clip description
Size: 2.3cm, 2.8cm, 3.2cm, 3.8cm
Type: t type and u type
Material: korea stainless steel and general steel
Color: black, brown, dark brown, light brown, beige, flesh, etc.
Micro ring description
Aluminium size: 35*20*25, 36*24*28, 40*27*28, 45*30*28, 50*40*32, etc, any size is available.
Copper ring size: 30*24, 34*30, 28*23, 40*36, etc, any size is available.
Type: without screw, with screw, copper with edge, and copper without edge, copper with slit etc.
Material: aluminium and copper, red copper.
Color: black, brown, dark brown, light brown, beige, flesh, etc.
Other tools:
Hair extension iron
Hair straighter
Loop brush
Glue hot pot
Scissor
Glue sticks
Hair fusion connector
Needle
1. Easy to operate, quick to be cured.
2. No bleeding, narcotization is not necessary.
3. High and new laser technology-instantaneous explosion.
4. Standardized building block design, convenient in maintenance.
5. Will not destroy hair follicle, will not injure ordinary skin and scarless.
6. Solid laser, produced according to international standard, stable in property.
Special features: top-safety, painless, no scar
Brand name:Yinhe
Quality certification: Ce, Tuv,
Capability: 100 sets per month
Delivery time: 10 days
Place of origin: Zhejiang
Packaging: cartons & aluminium case
Minimum order: 1 set
Price term: fob
Payment terms: t/t
Currency type: usd
- Size: 6.5inch with hook
- Razor Sharp Blades
- Material: J2 Stainless Steel
- Packed in an elegant Leather pouch or Blister pack
- Made in Pakistan but on German Quality Standards
- Certifications: CE (from UK) & cGMP (from FDA, USA)
Each scissors packed in elegant leather pouch or blister pack.
The system applies the intense pulse light of broad spectrum onto the skin and penetrates skin through epidermis into dermis and is a high-selective absorption. Wherein, the Pyrogenation Theory, IPL energy is converted to thermal energy, and then to break the defect by heating surface.
Under the lights organism activation, the energy can stimulate the skin to regenerate new collagen to replace the damaged area, and then produce elastic fibers, consequently smooth skin. Thus reach the effects of diminish wrinkles and shrinking pores and skin tightening. Which can make you skin look better.
Light source Pulsed-xenon Lamp;
Energy density 6-35J/cm2;
Pulse width 5-30ms;
Light spot area 40í-8mm2; 40í-10mm2; 40í-16mm2;
Frequency 0.5Hz;
Display Color LC touch screen;
Cooling 0-5 íµ;
Dimension 560í-380í-460mm
Weight 25 Kg;
