1.The xenon lamps be imported from u.S. It ensure that the shot time is much more than other industrial.
2.The self-priming silent pump can support for strong water cycle, and ensure the water cycle smoothly.
3.Large capacitor ensure the effectiveness of the light.
4. Pure copper heat sink, can quickly reduce the temperature.
5.Arm platform support, embedded design, the micro-computer functions, operational speed, low power consumption, and increase the customer management system.
6.The changeable filters, it can reduce the cost of customers.
7.Quick insert design, convenience operation.
8.Multiple language settings, the customer more choices
9.Set a variety of skin type parameters and custom parameters to facilitate customer choice
10. Large tft touch screen, customers easier and more intuitive to operate
Functions:
Speckle talking, capillary lesion, hair removal, skin rejuvenation
Rf energy 0 j/cm¬˜~ 50j/cm¬˜
Laser energy:15 j/cm¬˜~50j/ cm¬˜ (no light under 10j)
Input power:1700w
Wavelength:530-1200nmú¼585-1200nm, 640-1200nm
Cooling:water+ air+ semiconductor
Pulses qty:1~5
Pulses width:2ms~10ms
Pulses delay:5ms~60ms
Laser beam size:a:8mm x 40mm b:15mmx50mm
Rf frequency:3m hz
Rf power íG50w
Working noise:íG65 db
Net weight:65kg
Gross weight(wooden package):93kg
Package size(wooden package):71.5 x 151 x 61mm
Continual working time:24h
Power source:ac220-240 50hz 1.2a
Applications 1. Remove unwanted hairs; 2. Remove facial vascular lesions (telangiectasis); 3. Clean and tighten visible pores; 4. Smooth fine wrinkles; 5. Make skin more flexible; 6. Improve the tone of skin and remove facial blemish; 7. Remove acne; 8. Skin whitening Treatment principle E-light combines three advanced technologies: bipolar radio frequency + ipl +skin contact cooling. When the three are united in one treatment, wonderful treatment experience and result can be expected. The energy of radio frequency can reach the middle and deep layer of the skin and heat up tissue, thus, lower energy is applied during the ipl treatment. Ipl energy has been absorbed by pigment, so pigment tissue has been heated enough to be broken down into lots of tiny particle, then they are metabolized through lymphatic system, so effect can be achieved perfectly. Uncomfortable feeling during the ipl treatment will be decreased significantly and better result can be expected. In addition, cooling system involved in e-light can also ease the uncomfortable feeling. The absorbing of the energy of radio frequency is not concerned with melanin. So, the e-light treatment can get good result on the soft or thin light color hair so as to decrease the risk caused by traditional ipl treatment Advantages 1.Designed according to abundant clinical data worked out by many famous clinical doctors; 2.Advanced technology: ipl+rf, can achieve the best effect. 3.Stainless components gurantee best quality. 4.Separate filters(sapphire) make treatment more professional and accurate. 5.Professional refrigeration system(-5¡ãc-0¡ãc) make treatment more comfortable. 6.Large colar touch lcd screen make operation more convenient Net weight 35kg Power 1200w Dimension 500mm¡¨¢400mm¡¨¢1050mm (l¡¨¢w¡¨¢h) Electrical requirement Ac 220v¡¨¤10% 50hz Ac 110v¡¨¤10% 60hz
Supplier: IPL hair removal machine, RF skin tightening machine, elight(ipl+rf), q-switched ND YAG laser, vacuum cavitation slimming machine
RF energy 0 J/cm¬˜~ 50J/cm¬˜ Laser energy : 15 J/cm¬˜~50J/ cm¬˜ (No light under 10J) Input Power:1700W Wavelength:530-1200nmú¼585-1200nm,640-1200nm Cooling water+ air+ semiconductor Pulses qty:1~5 Pulses width:2ms~10ms Pulses delay:5ms~60ms Laser beam size A:8mm x 40mm B:15mmx50mmú¿optionalú¬ RF Frequency:3M HZ RF power:50W Working Noise:-65 db Continual working time:24h Power source:AC220-240 50HZ 1.2A Net Weight:35kg Gross Weight(wooden package):45kg Package Size(wooden package):80.5 x 71.5 x 60mm
Technical Principles E-light technology -- Aimed at entire dermis and connective tissue, IPL and Bipolar RF technology stimulates and makes the collagen in different depths rearrange and grow so as to achieve the therapeutic effect, while bipolar radio frequency simultaneously releases energy, making diseased tissues in epidermis and dermis produce light pyrolysis through skinâ??s selective absorption of light energy. Because of energy it needs far lower than traditional IPL, it makes the pigmented and vascular diseased tissues in epidermis and dermis absorb more energy without skin damage and removes these diseased tissues, by which achieves therapeutic effect. RF technology -- first ensuring your skin is comfortable and off damage and then taking advantage of RF waves to generate heat conduction, RF accurately reaches to skin's deep layer, stimulates the ions and charged colloidal particles in body rapidly move or vibrate. Friction generating heat, skin will naturally come to an immediate contraction when collagenous tissues in skin's deep layer reach to 45-60, then stimulates to secrete new collagen to rearrange and fill the gap of atrophic and lost of collagen, rebuilds the soft stent of skin, and finally achieve skin tightness, wrinkles filling and skin elasticity and gloss regaining. YAG technology - on the basis of the theory that immediate and high-energy laser emission can efficiently crushes the pigment of diseased tissues, YAG makes irradiated pigment particles absorb power and swell to crack. Part of them splitting into more tiny nibs are excreted, and part of them are swallowed by body macrophage and excreted through lymphatic system, by which pigments are eliminated. Because normal tissue does not absorb the laser with fixed wavelength, thus the integrity of the cell framework is maintained without conditions that invoke scars form. Wave function is introduced 480--1200nmTender skin wrinkle 530-1200nm The spot to pigment 640--1200nmHair removal Technology Data Illuminant E-light Spectral Range 480nm-1200nm,530nm-1200nm 640nm-1200nm Illuminance Area 10*40mm E-light 10*40mm OPT) IPL energy 1-50J/cm² Adjustable pulse width 2-99ms Pulse 1-5 RF energy 1-30J/cm³ RF frequency Bipolar5Mhz3 treating probes Laser wavelength 1064nm/532nm Laser type Q Switch Nd:YAG Laser energy 30-1500J/cm² Laser frequency 1-6Hz Display screen 10.4 ture color touch screen Cooling system Water cooling + semiconductor refrigeration, air cooling Total power 2500W Voltage AC110V Weight 60kg Dimension 62*55*134Cm
Portable Laser Hair Removal Machine is based on selective dynamics of light and heat. The laser wavelength 650 950nm goes through the skin surface to reach the root of hair follicles; light can be absorbed and converted into heat damage hair follicle tissue, so that hair loss regeneration without injury surrounding tissue. The filter remove the wavelength below 650nm and above 950nm (which brings much pain to skin), so customers will feel pain less.
Theory Professional IPL Hair Removal Machine is based on selective dynamics of light and heat. The laser wavelength 650~950nm goes through the skin surface to reach the root of hair follicles; light can be absorbed and converted into heat damage hair follicle tissue, so that hair loss regeneration without injury surrounding tissue. The filter remove the wavelength below 650nm and above 950nm (which brings much pain to skin), so customers will feel pain less. Before&After Specification Theory Professional IPL Hair Removal Machine Wavelength SHR 650nm-950nm; Elight 430/530/640-1200nm standard; 480/560/590/690/750-1200nm optional Energy Density (Fluence) 1-26J/cm²(SHR), 1-60J/cm²(Elight) Spot Size 1550mm²(SHR), 15 35mm (Elight) 12 33mm, 10 40mm optional Stand-by Working Continuously for 12 hours Display 8.4 True Color LCD Touch Screen Pulse Duration 0.5-15ms Advantage 1.Quality Assurance Professional IPL Hair Removal Machine with TUV Medical CE, CFDA and American FDA-cleared, ensure safe operating and excellent quality 2.Integrated Self-cooled FDP Handpiece Professional IPL Hair Removal Machine Self-cooled system - pain free; Fast Delivery Pulse technology, Different spot size optional - work on face or body conveniently. 3.Intelligent Software Professional IPL Hair Removal Machine use simple mode for beginners, can get Pre-set parameters automatically according to skin types, hair density, colors and thickness. Professional mode for experts, can set different parameters according to your patients 4. JAPANESE NIPPON CAPACITORS (3*12000uf) Stable working, each pulses equal energy at 10 shots/second. Payment T/T Bank Transfer, Western Union
Hair removal, pigmentation remocal, skin rejuvenation, vascular removal ,acne treatment, wrinkle removal.
Apollo V+ is a light based platform, which integrate lasers, intense pulse light and RF technology. A variety of application-specific handpieces are available, and more than 50 medical and aesthetic applications can be accomplished in one machine. Apollo V+ expands to your treatment needs and adapts to future applications. Specifications: Function Light Based Station Handpiece Type Laserú¼IPLú¼IPL+RF Repetition 0.5Hz Operating Panel 8.4í¦ TFT Color touch screen Skin protection Contact cooling, 0-5íµ Dimension 410í-410í-1120mm3 Power 1500W Weight 60Kg Size:55*55*153cm Weight: 67KG
Whether you have light, dark or tanned skin, coarse or fine hair, SHR hair removal solutions achieve maximum results for all areas of the body with treatments that are safe, quick and best of all-virtually painless. Application:Permanent Hair Removal, Photo Rejuvenation, Pigmentation Correction, Vascular Therapy, Acne Treatment, Wrinkle Removal.
Theory Portable IPL Laser Hair Removal Machine is based on selective dynamics of light and heat. The laser wavelength 650 -950nm goes through the skin surface to reach the root of hair follicles; light can be absorbed and converted into heat damage hair follicle tissue, so that hair loss regeneration without injury surrounding tissue. The filter remove the wavelength below 650nm and above 950nm (which brings much pain to skin), so customers will feel pain less Before&After Specification Theory Portable IPL Laser Hair Removal Machine Wavelength IPL 430/530/640-1200nm standard 480/560/590/690/750-1200nm optional Energy Density (Fluence) 1-60J/cm (IPL) Spot Size 15*50mm Cooling Air + Water + Sapphire contact cooling (-4- 4) Net Weight 26KG Dimensions (W x L x H) 69 52 59cm Advantage 1.Quality Assurance TUV Medical CE, CFDA and American FDA-cleared, ensure safe operating and excellent quality. 2.In-Motion Technology Portable IPL Laser Hair Removal Machine with In motion technology, combines concurrent cooling with a gradual thermal risk to the targets therapeutic temperature, without the risk of injury and with much less pain for the patient. 3. SAFTTY HANDPIECE DESIGN Portable IPL Laser Hair Removal Machine use optimized Handpiece structure, Combines Intelligent Water Cryling and Xenon Lamp Protect System, NEVER burn lamp. 4.Intelligent Software Simple mode for beginners, can get Pre-set parameters automatically according to skin types, hair density, colors and thickness. Professional mode for experts, can set different parameters according to the patients Package&Delivery Package Portable IPL Laser Hair Removal Machine is packed in alumimum alloy box Delivery 12-14 Days Shipment Door to door (DHL/TNT/UPS/FEDEX/EMS) By air, By sea