Sylustar CO2 fractional laser cosmetology system provides the most effective way to treat and improve skin condition, focus on the wrinkle, acne, chloasma, scar, slack skin and light aging skin. The ordered cone-shaped aperture with high energy contracts skin in a few minutes, which improves the skin effectively and promotes the generation of the new collagen in the deep layer.
Unique function
This therapy system is equipped with high speed scanner and high-quality unimodal laser, adopted advanced super pulse emission technology which can act upon the skin in very short time( Each laser point composed by numbers of laser pulses, the minimum laser pulse width is up to 0.1ms). Each laser pulse has a very high peak power, which has a strong stimulus effect to the tissues, therefore a single action point can reach the treatment effect by dozens of mJ energy. The conventional emission will require several hundred mJ energy, the heat damage is 5-10 times than the CO2 cosmetology system.
Compared with the Erbium laser (2940nm), this system has the merit of deep stimulate to the tissue and short treatment duration.
By using this therapy system, a whole facial treatment can be completed within 20-30 minutes. After the operation, people don't need particular vacation or rest, so it is also the most effective treatment program for office workers to obtain beauty as well.
This therapy system can bring remarkable and lasting effect after only one or two times treatments with little trauma and pain, as a result, it is applicable to everyone desiring for beauty.
Primary function
The cone-shaped apertures formed helps to contract skin surface.
To activate collagen hyperplasia, improve and keep skin tissue in a quite long time.
Therapy principle
This system adopts the scanning dot-matrix irradiation method which can form an ablated area composed of laser action points and lattice spacing on the epidermis, each laser action point is composed by a single or more high-energy laser pulses. The laser action points can directly reach to the dermis layer and form cone-shaped aperture. The laser can stimulate the proliferation and promote the restructuring of the collagen. The contraction of the cone- shaped aperture will obviously improve the skin voluptuous. Skin becomes smooth, elastic and gets a qualitative improvement.
Therapy characteristics
Short treatment duration, little hurt feel, without pigmentation and depigmentation when the spots distance is larger than 1mm, needs no additional cosmetics.
The effect of treatment keeps for many years for it can activate collagen hyperplasia. Especially, the effect is more obvious within several months after the treatment.
The Laser action point (Non-carbonated gasification point) is less than 10 percent of the whole treatment area, and will recover quickly. As the main treatment area remains intact during operation, the patients can use cosmetics at the second day after the treatment.
Scope of application
To eliminate the wrinkle, fine lines, scar, ease forehead wrinkle, to improve large pore, to thicken dermal layer.
To improve skin pigmentation such as chloasma, age pigment and freckles.
To treat the acne, verruca, naevus, etc.
To improve lighting aging skin.
Applicable groups
Office workers who bear heavy pressure without vacation.
Full-time housewives who keep tedious housework under tense rhythm of life.
All people desiring for beauty and youth.
Main technical parameter
Laser wavelength: 10.6ª¦m
Laser unit: TM00 module CO2 unit (Best quality for the facula)
Output power: Super pulse output 0.3-15W, peak value 450W
Continuous output 0.5-25W
Laser output mode: Continuous, Single pulse, Repeat pulse, Super pulse
Conducting system: Seven joints longer arculated arm
Therapy handpiece: With multiple function scanning generator, the single maximum scanning area could reach 20mmí-20mm.
Output Shape: Square, rectangular, round, oval
Operation mode: Controlled by a touchable screen and with the engineer interface and the doctor interface.
Min. Spot diameter: í_0.2mm
Pulse width: The minimum pulse width is 0.1ms
Power supply: AC 220Ví+10%/50Hz 5A
Principle of the therapy
Sylustar Bipolar Radio Frequency (MBRF) uses RF technology accompanied by infrared-assisted positioning and aspirating of the skin for wrinkle removal and skin tightening. High frequency wave permeates epidermis and take effect on the collagen-rich dermal tissue directly which makes water molecules in the skin move to and fro wildly. The heat generates and results in contraction of collagen and generation of new collagen and wrinkle renewal.
Treatment scope:
Face: Thin line, pouch, forehead wrinkle, cheek line, and wrinkle around lip, acne, neck line, double chin, skin-smoothing, deep & light wrinkle.
Chest: Enhance chest shape, breast-beautifying and chest- strengthening
Body: Arm, waist, abdomen, leg, pregnancy line, loose-skin tightening
Advantages
1, Bio-polar, Safe Device, cooling treatment handle pieces to protect the skin well.
2, Two handle piece for face and body. The spot size for body is 35mm*35mm and for face is 20mm*20mm.
3, Simple operation: Complete English designing makes operation clear and simple.
4, Safe and reliable: RF is a non-invasive, non-surgical, no scar, no bleeding, no downtime or recuperation way of treatment, which makes patients shape their charming figure and tighten their skin safely.
5, Special Effects: Effective wrinkle -removal, skin tightening, breast-beautifying and chest-strengthening have proved by clinical experiments
6, High-frequency electric wave, advanced and unique technology is used both in domestic and oversea markets
7, Simple maintenance: The RF machine is designed and made according to blocking technology.
Applications
a.Deep and light wrinkles eliminating
b.Improving skin-elasticity and skin-shine
c.Pregnancy line restoring
d.Skin-metabolism improving
e.Focusing Radio-Frequency, Immediate effect
f.Anti-aging for whole body
g.Divide bacterium and diminish inflammation
h.Improve pore-expanding body shaping
Specifications
Energy Source: Radio Frequency
Frequency Output: 10M Hz
Treatment model: bi-polair system, pulse and continuous mode,
Power input: 500W
Fuse Capacity: 10Az
Pulse duration: 1-5 seconds
Screen: 7.5 inch full ¿Ccolor touching display + Complete English Menu
Output Energy: 0 ¿C 50J (adjustable)
Temperature: 2-6oC
Voltage: AC 220V í+10%, 12A, 50Hz, AC110V í+10%, 12A, 50Hz
Dimension: 565(W) x 440(D) x880(H) mm
Net Weight: 41kg
Gross Weight: 70kg
Theory of PDT
As the most advanced technology, PDT beauty system using America original LED photobiology with the purity of 99% light acts on the target skin tissues to raise the activity of cell and improve the metabolism. No thermal effect, no injury and discomfort on the skin, which is not available for traditional skin care products.
Red light:
The red light absorbed selectively by the pigments and blood vessel can reach the result of skin rejuvenation, whitening, speckle and vascular removing, reducing acne and recovering the injured skin.
Blue light:
The blue light can inhibit the inflammation, kill acne bacillus so as to eliminate acne of the skin.
Mixed light:
The Mix light of red and blue can improve the microcirculation to irritate the fabric cellular to enhance collagen and elastic fibers production, reconstruct the dermis collagen fabric structure, eliminate fine winkles, enhance stretch facial skin and effectively alleviate symptom of laxity so as to change the roughness dark tone of facial skin.
Technical specification
Light source: LED
Pulse duration: CW
Red light Wavelength: 640nm
Output: 40W
Energy/power: 90mw/cm2
Luminous intensity: 10000~12000mcd
Output intensity: 90mw/cm2
LED head area (LxW): 180mmX50mm
Treatment time: 1-30minutes (20 m )
Blue light wavelength: 465nm
Output: 50W
Energy/power: 110mw/cm2
Luminous intensity: 10000~12000mcd
Output intensity: 110mw/cm2
LED head area (LxW): 180mmX50mm
Treatment time: 1-30minutes (20 m )
Cooling: air cooling system integrated into the system
Dimension: 630x245x560 mm
Head: 250*350mm
Weight: 12.5 Kg
Voltage: AC 220V, 12A, 50Hz, AC110V, 12A, 60Hz
Technology parameters:
Net:30kg
Power frequency: 50HZ/60HZ
Voltage: 220V-240V/110-120V
Size of machine:56x45x99(cm)
Size of packing:61x50x99ú¿cmú¬
The freckle removal technology for Magnetic Freckle Removal Beauty Machine is favored domestic and abroad.It is special Magnetic Freckle Removal Beauty Machine,decompose black pigment with magnetic freauency,and suck it to the surface of skin,remove it completely extemporely.Its most obvious characters:remove the freckle extemporely,fast and safe,without scar,not easy to rebound.
Magnetic Freckle Removal Beauty Instrument Excellences: Using the international advanced magnetic wave to take spot, using magnetic-frequency to decompose melanin, and its absorption to the skin surface, on the spot to remove it . fast speed, safe, leaving no scars, no easy to rebound. After the removal , the repair period is generally 3-7 days. Experience of feeling: like needles, but not needles, not "bar" but suck, a small magnetic control probe like a vacuum cleaner, suction in the freckle of skin gently, it will absorption subcutaneous melanin to the skin surface, the skin seems to have been slightly "sticky" a moment, there is no pain, a freckle so easily have been removed , taking a freckle each time no more than 2 seconds. You can witness, freckle was gently removed from the surface, skin with freckle on the spot is clean ,the feeling of really wonderful! Fundamentally different from the laser, optical quantum, refrigeration, medicine, electricity and burning and other methods freckle removal is finished on the spot,will not affect the normal work.
The function of Magnetic Freckle Removal Beauty Machine:
1.Take the freckle extemporely: freckles, sunburn, chloasma one, dehydrated spot, age spots, dark spots, and moles, granulation, syringoma, flat warts and so on.
2.The rapid red blood streak removal: quickly and efficiently get rid of red blood streak, filaments that can be eradicated once and will not rebound, tube 2-3 times, 3-4 times to wipe out sheet.
3.Take healed scars magically: due to burns or burns, surgery, laser ,left a variety of scars, acne, smallpox left pits.
Normally,the freckle of epidermis layer can be removed once , the freckle of dermal layer 2 to 3 times can be removed , attention to sun protection and hydration will not rebound.Against the senile plaques, nevi, flat warts, common warts, melanoma, fat granule, syringoma and so on ,can be once eradicated; For the red blood streak: filaments that can be eradicated once and will not rebound, tube 2-3 times, schistose removed 3-4 times.
Machine fittings: 2 freckle removal Knife probe;
Case Material: ABS material, anti-static, radiation, not easy to deformation (export exemption material)
After-sales service: Guarantee replacement if a quality problem within one year, Lifetime free maintenance.
Wax Heater
-ideal for heating wax of 400g directly put inside;
-heating indicator light;
-Temperature regulator control knob;
-with removable inner container and metal bar;
-CE approval.
Wax Heater
-ideal for heating wax of 400g directly put inside;
-heating indicator light;
-Temperature regulator control knob;
-with removable inner container and metal bar;
-CE approval.
Product description:
This machine takes body slimming, relaxation, and detoxification functions in one. It has 7 clothes, every cloth with 14 air bags, 10 strainers. Air hags are symmetirical. There is each around the waist and belly. Also symmetrical from top to bottom on the legs. Can freely apply on every part which is needed obesity removal.
Product description
1. Air bags are inflated and deflated regularly with continually changed air pressure, which can rub off, dissociate, smash the fat cells.
2. Infrared ray makes a direct action on the fat structure, which can release a great deal of heat energy, accelerate the circulation of blood and lymph, promote the metabolism, speed biochemistry reaction, consume aip, make catabolism of fat cells, largely decrease the fat cells.
3. Low frequency pulse electricity can stimulate the muscle to fremitus and shrink, which can decompose large quantity fat cell; electric pads put on the points, which can adjust the function of inner body and restrain to come into be fat, to accelerate metabolism.
Product description
Functions of rf beauty equipment:
Face lifting.
Skin lifting around eyes.
Tighten neck skin.
Improve drooping and slack nose wrinkle.
Firm forehead skin and lessen wrinkle.
Lift and tighten breasts.
Tighten and sculpture the back.
Tighten and sculpture the waist.
Sculpture the buttocks and legs.
Tender skin of hands.
Product description
The cavitation system is one of the most advanced and complete ultrasonic machine on the worldwide markets; it includes the 1mhz ultrasounds for face and body, and the newest ultrasonic cavitation wavelength at 40 khz for body.
The cavitation system, able to act on the skin surface (1mhz ultrasound) providing skin tightening as well in the deep layers, (cavitation) providing "real" results, after the treatment, in terms of cellulite and localized adiposity. The cavitation system is able to gently and safely eliminate centimeters of belly, buttocks, hips and thighs without any side effect!
Ultrasonic waves in a specific range from 20 to 70 khz are able to cause the so called "cavitaion" effect: focused high energy waves creates micro bubbles of vapour inside the adiposities and in the interstitial liquids of cellulite; thanks to the liquid's alternation of several phase, expansion and compression, the adiposities implodes with the consequent release of water and fat that is going to be metabolized by the liver.
The cavitation system select 40khz low frequency, which is belongs to the acoustic cavitation. So, we also call the technology awt (acoustic wave therapy).
Acoustic cavitation. In a non-flowing system the ambient pressure can be varied by sending sound waves through the liquid. The ultrasonic sound waves are made up of alternate compressions and rarefactions. During the rarefaction cycle (low pressure) a lot of microscopic bubbles will grow and during the compression cycle (high pressure) each bubbles undergoes a collapse or implosion.
Cavitaion probe-40 khz
1. Aiming at stubborn fat, and decomposing different sizes of fat globule, finally reduce the volume of fat;
2. Producing cavitation effect and can reach deep layer of fat by the bubbles and negative & positive effect.
3. Breaking down epicyte of fat, decreasing the amount of fat.
1.The xenon lamps be imported from u.S. It ensure that the shot time is much more than other industrial.
2.The self-priming silent pump can support for strong water cycle, and ensure the water cycle smoothly.
3.Large capacitor ensure the effectiveness of the light.
4. Pure copper heat sink, can quickly reduce the temperature.
5.Arm platform support, embedded design, the micro-computer functions, operational speed, low power consumption, and increase the customer management system.
6.The changeable filters, it can reduce the cost of customers.
7.Quick insert design, convenience operation.
8.Multiple language settings, the customer more choices
9.Set a variety of skin type parameters and custom parameters to facilitate customer choice
10. Large tft touch screen, customers easier and more intuitive to operate
Functions:
Speckle talking, capillary lesion, hair removal, skin rejuvenation
Rf energy 0 j/cm¬˜~ 50j/cm¬˜
Laser energy:15 j/cm¬˜~50j/ cm¬˜ (no light under 10j)
Input power:1700w
Wavelength:530-1200nmú¼585-1200nm, 640-1200nm
Cooling:water+ air+ semiconductor
Pulses qty:1~5
Pulses width:2ms~10ms
Pulses delay:5ms~60ms
Laser beam size:a:8mm x 40mm b:15mmx50mm
Rf frequency:3m hz
Rf power íG50w
Working noise:íG65 db
Net weight:65kg
Gross weight(wooden package):93kg
Package size(wooden package):71.5 x 151 x 61mm
Continual working time:24h
Power source:ac220-240 50hz 1.2a
Our shaving brush head was originally made from top-grade badger hair, soft quality, pure colouring, round and plump appearance, sharp point naturally straight and water retention quality; feel well; handmade purly, have many kinds of styles for you to choose.
Our shaving brush head was originally made from top-grade badger hair, soft quality, pure colouring, round and plump appearance, sharp point naturally straight and water retention quality; feel well; handmade purly, have many kinds of styles for you to choose.
Here are a few tips to help ensure the best results and long life with your iron.
1. The iron has been with an idci plug. This helps to prevent electric shocks. If the iron does not turn on when the switch is turn to the on position, be sure that the r reset button on the plug is depress. In the case of the local electrical interruption, be sure to reset the plug before using again.
2. The iron is turn on and off by sliding the conceal switch inside the hankle. The r indicator light willl tell you when the iron is in the heating mode. This light may flicker during heat cycles. Always turn the iron off when not in use.
3. The ceramic paddles may be clean of product build-up using rubbing alcohol and a clean cloth. Be sure that the iron is turn off, unpl, and cool to the touch before cleaning. Do not use abrasive cleaners or materials on the ceramic plates, as this will damage the heating surface.
4. As with any electrical appliance, keep the iron away from water. Never submerge the iron in water as it will damage the iron and void the warranty.
5. Should the hinge mechanism become loose and the plates fail to align properly, the hinge may be tighten. Unplug the iron and allow to cool. Carefully remove the caps covering the hinge. Tighten the screw inside the hinge until the plates align. Replace the hinge covers, and return to normal usage
Top quality ; lower price ; fastest shipping; best service;100% satisfaction
Here are a few tips to help ensure the best results and long life with your iron.
1. The iron has been with an idci plug. This helps to prevent electric shocks. If the iron does not turn on when the switch is turn to the on position, be sure that the r reset button on the plug is depress. In the case of the local electrical interruption, be sure to reset the plug before using again.
2. The iron is turn on and off by sliding the conceal switch inside the hankle. The r indicator light willl tell you when the iron is in the heating mode. This light may flicker during heat cycles. Always turn the iron off when not in use.
3. The ceramic paddles may be clean of product build-up using rubbing alcohol and a clean cloth. Be sure that the iron is turn off, unpl, and cool to the touch before cleaning. Do not use abrasive cleaners or materials on the ceramic plates, as this will damage the heating surface.
4. As with any electrical appliance, keep the iron away from water. Never submerge the iron in water as it will damage the iron and void the warranty.
5. Should the hinge mechanism become loose and the plates fail to align properly, the hinge may be tighten. Unplug the iron and allow to cool. Carefully remove the caps covering the hinge. Tighten the screw inside the hinge until the plates align. Replace the hinge covers, and return to normal usage
Top quality ; lower price ; fastest shipping; best service;100% satisfaction
Here are a few tips to help ensure the best results and long life with your iron.
1. The iron has been with an idci plug. This helps to prevent electric shocks. If the iron does not turn on when the switch is turn to the on position, be sure that the r reset button on the plug is depress. In the case of the local electrical interruption, be sure to reset the plug before using again.
2. The iron is turn on and off by sliding the conceal switch inside the hankle. The r indicator light willl tell you when the iron is in the heating mode. This light may flicker during heat cycles. Always turn the iron off when not in use.
3. The ceramic paddles may be clean of product build-up using rubbing alcohol and a clean cloth. Be sure that the iron is turn off, unpl, and cool to the touch before cleaning. Do not use abrasive cleaners or materials on the ceramic plates, as this will damage the heating surface.
4. As with any electrical appliance, keep the iron away from water. Never submerge the iron in water as it will damage the iron and void the warranty.
5. Should the hinge mechanism become loose and the plates fail to align properly, the hinge may be tighten. Unplug the iron and allow to cool. Carefully remove the caps covering the hinge. Tighten the screw inside the hinge until the plates align. Replace the hinge covers, and return to normal usage
Top quality ; lower price ; fastest shipping; best service;100% satisfaction
Here are a few tips to help ensure the best results and long life with your iron.
1. The iron has been with an idci plug. This helps to prevent electric shocks. If the iron does not turn on when the switch is turn to the on position, be sure that the r reset button on the plug is depress. In the case of the local electrical interruption, be sure to reset the plug before using again.
2. The iron is turn on and off by sliding the conceal switch inside the hankle. The r indicator light willl tell you when the iron is in the heating mode. This light may flicker during heat cycles. Always turn the iron off when not in use.
3. The ceramic paddles may be clean of product build-up using rubbing alcohol and a clean cloth. Be sure that the iron is turn off, unpl, and cool to the touch before cleaning. Do not use abrasive cleaners or materials on the ceramic plates, as this will damage the heating surface.
4. As with any electrical appliance, keep the iron away from water. Never submerge the iron in water as it will damage the iron and void the warranty.
5. Should the hinge mechanism become loose and the plates fail to align properly, the hinge may be tighten. Unplug the iron and allow to cool. Carefully remove the caps covering the hinge. Tighten the screw inside the hinge until the plates align. Replace the hinge covers, and return to normal usage
Top quality ; lower price ; fastest shipping; best service;100% satisfaction
The frame built from top quality billet materials, has been great heat treated and hot oil treated numerous times for protection .
The start running voltage is 3v, and the smooth running voltage is 7-9v. Runs with low temperature, strong-high performance, will not overheat even after many hours of continuous use.
Payment terms: u tt/paypal
Lead time: u 10 business days
Payment terms: u tt
Brass tattoo machine ( top tattoo machine high quality tattoo machine )
1)is made of brass material, and it is very popular for clients.
2) it works great , it won't be turn to be hot when you use it through a long time .
3) it can be according to customer's design (oem is welcome).
