Technical Date Sheet CCS Tracer Wire-14AWG Open Cut SuperFlex-1430/1445 Performance CCS Conductor Conductor Size 14 AWG±1% Conductivity 21% Minimum Tensile strength 331 MPa Minimum Elongation 10% Nominal Resistivity at 20 0.08210 mm²/m Average Breaking Load 0.6707 kN Performance Insulation Material HDPE Thickness 30mil / 45mil Open Cut High Strength-1430/1445 Performance CCS Conductor Conductor Size 14 AWG±1% Conductivity 21% Minimum Tensile strength 462 MPa Minimum Elongation 2% Nominal Resistivity at 20 0.08210 mm²/m Average Breaking Load 0.964 kN Performance Insulation Material HDPE Thickness 30mil / 45mil Horizontal Directional Drill Extra-High Strength-1430/1445 Performance CCS Conductor Conductor Size 14 AWG±1% Conductivity 21% Minimum Tensile strength 1554 MPa Minimum Elongation 2% Nominal Resistivity at 20 0.08210 mm²/m Average Breaking Load 3.242 kN Performance Insulation Material HDPE Thickness 30mil / 45mil
Technical Date Sheet CCS Tracer Wire-14AWG Open Cut SuperFlex-1430/1445 Performance CCS Conductor Conductor Size 14 AWG±1% Conductivity 21% Minimum Tensile strength 331 MPa Minimum Elongation 10% Nominal Resistivity at 20 0.08210 mm²/m Average Breaking Load 0.6707 kN Performance Insulation Material HDPE Thickness 30mil / 45mil Open Cut â?? High Strength-1430/1445 Performance CCS Conductor Conductor Size 14 AWG±1% Conductivity 21% Minimum Tensile strength 462 MPa Minimum Elongation 2% Nominal Resistivity at 20 0.08210 mm²/m Average Breaking Load 0.964 kN Performance Insulation Material HDPE Thickness 30mil / 45mil Horizontal Directional Drill Extra-High Strength-1430/1445 Performance CCS Conductor Conductor Size 14 AWG±1% Conductivity 21% Minimum Tensile strength 1554 MPa Minimum Elongation 2% Nominal Resistivity at 20 0.08210 mm²/m Average Breaking Load 3.242 kN Performance Insulation Material HDPE Thickness 30mil / 45mil
PTFE Insulated Wires & Cables(High Temperature Wire) a. We can produce more than 3000 meters continue length, without any splice b. Can produce 300â?? high temperature line. c. PFA/FEP/ETFE material. d. High temperature wires of different conductor sizes can be produced e. Solid or stranded conductors are available according to customer's requirements f. Can meet different voltages
Copper wire Brand new
Usage/Application For conducting electricity Color Red, Blue, Yellow, Black Size 0.75, 1.0 , 1.5 , 2.5 & 4.0 sq MM Material PVC & Bunched copper Length 90 mtr Features FRLS (Low Smoke) Type Bunched Copper Length Mark On per Meter
type:Red Copper Wire, Bare Cppper wire Application:Cables, Cable/Industry Wire Gauge:0.10-0.30mm Grade:Cooper Wire Cu (Min):99.95% Alloy Or Not:Non-alloy Ultimate Strength (â?¥ MPa):Depends Place of Origin:Zhejiang, China (Mainland), Zhejiang Brand Name:OEM Model Number:copper wire, Copper Wire Color:red/customized Material:Copper Wire.etc Packing:Demand moq:1 ton delivery time:10-20 days annealing:Your choice
We have copper wire 99.99%. Quantity available - 20,000 MT Origin - Bahrain Payment terms - Cash and Carry Only seriously buyers please contact.
Enamel Coated Round/Flat Wire Enamelled aluminum wire is a type of winding wire made by electric round aluminum rod which drawn by dies with special size, then over coated with enamel repetitiously. Enamelled Aluminum Wire is a fundamental part of a winding in every electrical machine or apparatus. Compared to fibrous insulation, enamelled aluminium wire offers a favourable space saving factor together with a high level of breakdown voltage. The main application of Enamelled Enamelled Aluminium wire is in winding of Motor and Transformers.
Glass fiber-covered polyester film enamelled copper (aluminum) flat wire Product Introduction: Glass fiber-covered polyester film enamelled copper (aluminum) flat wire is made of high quality copper (aluminum) wire enamelled by polyester film and single double glass fiber, then dry roasted by insulated paint. This product has the capacity of high electricalbreakdown, temperature-resist grade has four: 130, 155, 180, 200, the product is widely used in electric reactor,transformer, electrical machinery, and other similar electrical winding. Executive standard: GB/T 7672-2008 Product range: Aluminum copper flat wire Narrow edge size a: 0.30-5.60mm Broad side size b:2.00-16.00mm Aluminum copper round wire Diameter size: 1.7-6.0mm If specifications beyond the above range, please contact us Materials Flat aluminium wire should be compliant with GB5584.3-2009, specific resistance is not more than 0.0280©mm2/m at 20. Copper strap wire should be compliant with GB5584.2-2009, specific resistance is not more than 0.017241©mm2/m at 20.
Product Introduction: Vertical winding has temperature-resist grade of C level or above, it satisfies various types of vertical winding, working temperature of long term use is 220. This product is suitable for transformer, electromagnet, electric welding machine and other similar equipment. Executive standardGB/T7095-2008 Production range Vertical winding Narrow edge size a:0.50mm5.00mm Narrow edge size b:3.00mm16.00mm Recommended conductor width ratio 1.5b/a7.5 If specifications beyond the above range, please contact us product categories � 220 class polyamideimide enamelled rectangular copper vertical wire Please contact us if chose other types of enamelled wire Materials copper strap wire should be compliant with GB5584.2-2009,specific resistance is not more than 0.017241Ωmm2/m at 20. Film thickness of enameled flat copper wire should be in accordance with the following Table, Please contact us if film thickness is specially required.
The name of the product: enameled flat wire. Low product introduction: paint BaoBian line refers to the oxygen free copper rod or electrical round aluminum rod by a certain specifications of the mold after drawing wire, according to customer requirements, the compatibility with the required heat resistance index and insulating paint, using mold or felt type paint, coating system of multichannel corresponding insulating paint, after baking treatment, make the insulating varnish and the conductor to form a whole. This product is suitable for winding of transformer, generator, motor, reactor and various electrical equipment. Standard: GB/ t7095-2008. Production scope: Aluminum copper flat wire Narrow side dimension a:1.00mm -- 5.00mm wide side dimension b:3.00mm -- 16.00mm. The recommended conductor width is less than 1.5 < b/a < 7.5. Please contact us if you choose the above range. Type of products: The copper (aluminum) flat line of the grade 120(155). It is a 130-grade polyester enamelled copper (aluminum) flat wire. The copper (aluminum) flat wire is a class 155. A flat wire of copper (aluminium) is coated with a 180 - grade polyester resin. A flat line of copper (aluminum) of 200 - grade polyamide/polyamide-imide composite paints. If you choose any other enameled wire, please contact us. Low material: Aluminum flat wire should comply with the regulations of GB5584.3-2009, when 20 â??, the resistivity not greater than 0.0280 © was/m Copper flat wire should comply with the regulations of GB5584.2-2009, when 20 â??, the resistivity not greater than 0.017241 © was/m
Usage: 10KV outdoor line, power transmission line Type of electric clamping: screw press with flat opening Connect the electrical clamping specification: the gap is 35mm and the maximum opening distance is 65mm Lever specifications: 1 m * 3, 30 mm, outside diameter Ф lever length and diameter can be customized according to user needs. Specification: wire diameter: 25mm, 3*1.5m+ 12m. Length and line size can be customized according to user requirements. Applicable voltage level: 10KV Categories: different voltage grade and use the specific environment of grounding line configuration is different, the same voltage grade different using conditions of the specific configuration of the grounding line also is different, the style of the ground rod length, clips, the thickness of the soft copper wire grounding length, grounding method, etc.).Therefore, the user must clearly understand the specific use environment and the correct voltage grade to select the correct type.
Product name: double glass silk covered wire. Low product introduction: glass silk covered wire is according to customer requirements, even on the copper (aluminum) conductor winding and 1 to 2 layers of alkali-free glass fiber, with the required heat resistance index and compatibility of dipping, baking varnish, and between the glass fiber, glass fiber bonding between conductor into a whole, at present the product of heat resistance index, 130, 155, 180 at three levels, with an average of 20 insulation thickness,30,40,50 four grades. This product is widely used in transformer, electromagnet, welding machine or other similar electrical equipment product winding. The electroless copper (aluminum) wire produced by extrusion process is the most ideal material for the production of glass filament copper (aluminum) wire. Standard: GB/ t7672-2008. Production scope: Aluminum flat wire Narrow side dimension a:1.00mm -- 6.30mm. Wide side size b:3.00mm - 25.00mm. Copper flat wire Narrow side dimension a:0.80mm -- 5.60mm. Wide side size b:2.00mm - 16.00mm. Copper aluminum round wire Diameter: 1. 1. Please contact us if you choose the above range. Low material: Aluminum flat wire should comply with the regulations of GB5584.3-2009, when 20 , the resistivity not greater than 0.0280 Ω was/m Copper flat wire should comply with the regulations of GB5584.2-2009, when 20 , the resistivity not greater than 0.017241 Ω was/m Low glass should be closely evenly around the conductor, double glass package copper (aluminum) line of two layers of glass wool around the package direction should be the opposite, and the double glass package copper (aluminum) flat wire insulation thickness should comply with the following table, narrow at the edge of the insulation thickness (B - B) do not make the inspection.
Actual Buyers(no brokers or intermediaries Please). See attached copper offer we currently have available, the price is 3% CFR. It's possible to Inspect before purchase but we would need to approve the visit and know who is going to the office for security concerns. If interested in moving forward fill out the attached ICPO format and we can move forward with the purchase. We will provide an FCO once we receive a clear ICPO and if the terms and conditions are agreed to. COUNTRY OF ORIGIN : Egypt LOADING PORT : SOKHNA PORT DESTINATION PORT : MUNDRA PORT , INDIA WIGHT : 200 / 300 KG Per bundle QUANTITY : 70 / 80 Bundles in each 20 ft container INSPECTION : 1. Buyer is allowed to inspect his goods in our factory while loading We can also do SGS analysis on their account FRIGHT : seller pays for material loading of the vessel and ocean freight . DELIVERY PERIOD : 1. First trial shipment need 25 days max after receipt of ODC . PAYMENT TERMS : 100 % LC at sight . BASE PRICE *Price for the commodity per MT ( Mention LME 97% CNF Europe Or India ) Price will be locked on the day of Proforma Invoice signing . CNF as outlined above ( here in referred to as the * BASE PRICE * ) The price of copper wire includes CNF port All other cost are to be borne by buyer at destination port . COMMODITY Standard size COPPER WIRE 3MM : QUANTITY : Trial shipment : 25 mt ( +/- 10 % ) binding with an annual contract of 500MT . PURITY : 99.4 % - 99.5% / Analysis Report FORM : Bundles in container
Packaging & Delivery Packaging Details: 99.99% Purity Copper Wire scrap/ bare bright coppercopper scrap wire 99.99% Purity Copper Wire scrap/ bare bright copper scrap packaging is 50kgs/bal Delivery Detail: 12days after getting deposit or LC at sight from clients Specifications 1.High quality with best price 2.Well reputation 3.Factory with strong supply ability 4. Prompt shipment Copper Wire Scrap, (Millberry Copper) 99% High Purity Wire diameter: 0.30mm, 0.25mm, 0.20mm Weight/spool: 3 kg, 5 kg, 7 kg, 15 kg, 20kg Tensile strength: 1000 N/mm2, 900 N/mm2, 500 N/mm2, 450 N/mm2, N/mm2 Application:copper scrap wire can be used on low speed wire cutting machines like Agie charmilles, Sodick, Specifications 1.High quality with best price 2.Well reputation 3.Factory with strong supply ability 4. Prompt shipment Copper Wire Scrap, (Millberry Copper) 99% High Purity Wire diameter: 0.30mm, 0.25mm, 0.20mm Weight/spool: 3 kg, 5 kg, 7 kg, 15 kg, 20kg Tensile strength: 1000 N/mm2, 900 N/mm2, 500 N/mm2, 450 N/mm2, N/mm2 Application:copper scrap wire can be used on low speed wire cutting machines like Agie charmilles, Sodick, Pure copper scrap 99.99% 1.Copper wire scrap 2.Copper wire,tube,plate,etc 3.High quality:99% Copper Scrap 99% High-quality cable scrap with almost no impurities Single Crystal Copper Wire 1.pure copper scrap 2.Good fatigue/abrasion/corrosion resistance 3.Be the bearing,switch,frame Application: Electrical, light industry, machinery, building industry, national defense industry Copper Scrap is industry a important sources of the raw materials All kinds of can be recycled Recycling waste production with copper Name Copper Scrap Wire (Millberry) 99.78% A NALYSIS RESULT ITEM S T A NDARD(%) RESULTS(%) Purity (Wt%) 99.78 99.9% CARBON 0.03% 0.03% COBLET
Bare Solid Copper Wire, -
China GLB industry limited founded in wenzhou, zhejiang, 2015. Specialized in copper product, such as copper braided wire,copper braided connector, copper flexible connector, copper stranded wire,copper stranded connector, insulated copper wire,insulated copper connector, copper lug,copper terminal, copper mesh, cable . Providing high quality low price, cost-effective goods all over the world and have good reputation.
China GLB industry limited founded in wenzhou, zhejiang, 2015., Specialized in copper product, such as copper braided wire, copper, braided connector, copper flexible connector, copper stranded wire,, copper stranded connector, insulated copper wire, insulated copper, connector, copper lug, copper terminal, copper mesh, cable . Providing, high quality low price, cost-effective goods all over the world and, have good reputation.
China GLB industry limited founded in wenzhou, zhejiang, 2015., Specialized in copper product, such as copper braided wire, copper, braided connector, copper flexible connector, copper stranded wire,, copper stranded connector, insulated copper wire, insulated copper, connector, copper lug, copper terminal, copper mesh, cable . Providing, high quality low price, cost-effective goods all over the world and, have good reputation.
Model NO.: Armoured Power Cable Voltage: Low and Medium Voltage Cable Insulation Material: XLPE Material Shape: Round Wire Certification: ISO, CCC, CE, VDE, SABS Brand: Lonheo Numbers of Cores: 1-5 Class of Conductor: Stranded or Solid Sheath: PVC,PE,LSZH Trademark: lonheo Specification: IEC HS Code: 8544492100 Application: Construction, Underground, Industrial, Power Station Current: AC Cable Sheath Material: PVC Wire Core Material: Copper or Aluminium Model: Armoured Power Cable Rated Voltage: Lower and Medium Size: 1.5-1000mm2 Insulation: PVC,XLPE Armoured Layer: Steel Wire,Steel Tape Package: Steel Drum, Wooden Drum, Steel Wooden Drum Origin: China Product Description General Introduction Of PVC OR XLPE Insulation Armoured Power Cable Specification 1. Our cables with XLPE or PVC (Polyvinyl Chloride) sheathing are manufactured in accordance with a wide range of IEC International Standards. 2. We supply a range of Qualified and hard-wearing Low to Medium Voltage armoured cables power cables for the supply of mains electricity. 3. These are available with Steel Wire Armour (SWA) Steel Tape Armour (STA) and Aluminium Wire Armour (AWA). 4. The armour provides additional protection, allowing it to be used directly in higher climatic and mechanical stress environments such as direct burial, outdoors, or underground. The armour also enables the cable to withstand higher pulling loads. Characteristic 1. Rated Voltage: 0.6/1KV,3.6/6KV~26/35KV 2. Numbers Of Cores: 1,2,,3,4,5,3+1,4+1,3+2 3. Nominal Cross-sectional Area: 1.5-1000, (As your requirement) 4. Conductor Material: 6mm2, Plain or Annealed Stranded Copper(CU) or Plain Aluminium(AL) 6mm2, Plain or Annealed Stranded Copper(CU) or Aluminium(AL) 5. Conductor Classification: The conductor have been divided into 2 classes. Class 1:Solid Conductor Class 2:Stranded Conductor 6. Insulation Material:XLPE or PVC XLPE: a crossed-linked polyethylene (XLPE) insulation provides thermal stability, good water resistant qualities and excellent electrical properties. PVC: polyvinyl chloride (PVC) is employed in order to create a protective barrier between the inner and outer layers of the cable. 7. Armoured: a steel or aluminium armour (SWA / AWA) provides mechanical protection to allow the cable to withstand the mechanical stresses to which it is exposed. Steel Armoured: Steel Wire Armoured-SWA, Steel Tape Armoured-STA Alumnium Armoured: AWA 8. Sheath Material(if have):PVC or PE or Polyolefin PVC: the constituent parts of the cable are held together in a black PVC sheath offering a further level of protection. Black sheaths can be carbon loaded for UV stability. Type & Structure: 1. Copper Core-CU 1.CU Core /PVC Insulation/SWA/PVC Sheath 2. CU Core /PVC Insulation/STA/PVC Sheath 3. CU Core /PVC Insulation/AWA/PVC Sheath 4.CU Core /XLPE Insulation/SWA/PVC Sheath or Polyolefin Sheath or LSZH Sheath 5. CU Core /XLPE Insulation/STA/PVC Sheath or Polyolefin Sheath or LSZH Sheath 6. CU Core /XLPE Insulation/AWA/PVC Sheath or Polyolefin Sheath or LSZH Sheath 2. Aluminium Core-AL 1.AL Core /PVC Insulation/SWA/PVC Sheath 2. AL Core /PVC Insulation/STA/PVC Sheath 3. AL Core /PVC Insulation/AWA/PVC Sheath 4.AL Core /XLPE Insulation/SWA/PVC Sheath or Polyolefin Sheath or LSZH Sheath 5. AL Core /XLPE Insulation/STA/PVC Sheath or Polyolefin Sheath or LSZH Sheath 6. AL Core /XLPE Insulation/AWA/PVC Sheath or Polyolefin Sheath or LSZH Sheath Size:1.5-1000mm2 Package:Steel Drum,Wooden Drum,Steel Wooden Drum Numbers of Cores:1-5
