Glass fiber-covered polyester film enamelled copper (aluminum) flat wire
Product Introduction: Glass fiber-covered polyester film enamelled copper (aluminum) flat wire is made of high quality copper (aluminum) wire enamelled by polyester film and single double glass fiber, then dry roasted by insulated paint. This product has the capacity of high electricalbreakdown, temperature-resist grade has four: 130, 155, 180, 200, the product is widely used in electric reactor,transformer, electrical machinery, and other similar electrical winding.
Executive standard: GB/T 7672-2008
Usage: 10KV outdoor line, power transmission line
Type of electric clamping: screw press with flat opening
Connect the electrical clamping specification: the gap is 35mm and the maximum opening distance is 65mm
Lever specifications: 1 m * 3, 30 mm, outside diameter Ф lever length and diameter can be customized according to user needs.
Specification: wire diameter: 25mm, 3*1.5m+ 12m.
Length and line size can be customized according to user requirements.
Applicable voltage level: 10KV
Categories: different voltage grade and use the specific environment of grounding line configuration is different, the same voltage grade different using conditions of the specific configuration of the grounding line also is different, the style of the ground rod length, clips, the thickness of the soft copper wire grounding length, grounding method, etc.).Therefore, the user must clearly understand the specific use environment and the correct voltage grade to select the correct type.
Product name: double glass silk covered wire.
Low product introduction: glass silk covered wire is according to customer requirements, even on the copper (aluminum) conductor winding and 1 to 2 layers of alkali-free glass fiber, with the required heat resistance index and compatibility of dipping, baking varnish, and between the glass fiber, glass fiber bonding between conductor into a whole, at present the product of heat resistance index, 130, 155, 180 at three levels, with an average of 20 insulation thickness,30,40,50 four grades.
This product is widely used in transformer, electromagnet, welding machine or other similar electrical equipment product winding.
The electroless copper (aluminum) wire produced by extrusion process is the most ideal material for the production of glass filament copper (aluminum) wire.
Standard: GB/ t7672-2008.
Production scope:
Aluminum flat wire
Narrow side dimension a:1.00mm -- 6.30mm.
Wide side size b:3.00mm - 25.00mm.
Copper flat wire
Narrow side dimension a:0.80mm -- 5.60mm.
Wide side size b:2.00mm - 16.00mm.
Copper aluminum round wire
Diameter: 1. 1.
Please contact us if you choose the above range.
Actual Buyers(no brokers or intermediaries Please). See attached copper offer we currently have available, the price is 3% CFR. It's possible to Inspect before purchase but we would need to approve the visit and know who is going to the office for security concerns. If interested in moving forward fill out the attached ICPO format and we can move forward with the purchase. We will provide an FCO once we receive a clear ICPO and if the terms and conditions are agreed to.
COUNTRY OF ORIGIN : Egypt
LOADING PORT : SOKHNA PORT
DESTINATION PORT : MUNDRA PORT , INDIA
WIGHT : 200 / 300 KG Per bundle
QUANTITY : 70 / 80 Bundles in each 20 ft container
INSPECTION : 1. Buyer is allowed to inspect his goods in our factory
while loading
We can also do SGS analysis on their account
FRIGHT : seller pays for material loading of the vessel and ocean freight .
DELIVERY PERIOD :
1. First trial shipment need 25 days max after receipt of ODC .
PAYMENT TERMS : 100 % LC at sight .
BASE PRICE
*Price for the commodity per MT ( Mention LME 97% CNF Europe Or India )
Price will be locked on the day of Proforma Invoice signing .
CNF as outlined above ( here in referred to as the * BASE PRICE * )
The price of copper wire includes CNF port
All other cost are to be borne by buyer at destination port .
COMMODITY
Standard size
COPPER WIRE 3MM :
QUANTITY : Trial shipment : 25 mt ( +/- 10 % ) binding with an annual contract of 500MT .
PURITY : 99.4 % - 99.5% / Analysis Report
FORM : Bundles in container
Application:copper scrap wire can be used on low speed wire cutting machines like Agie charmilles, Sodick,
Specifications 1.High quality with best price
2.Well reputation
3.Factory with strong supply ability
4. Prompt shipment
Copper Wire Scrap, (Millberry Copper) 99% High Purity
Application:copper scrap wire can be used on low speed wire cutting machines like Agie charmilles, Sodick,
Pure copper scrap 99.99%
1.Copper wire scrap
2.Copper wire,tube,plate,etc
3.High quality:99%
Copper Scrap 99%
High-quality cable scrap with almost no impurities
Single Crystal Copper Wire
1.pure copper scrap
2.Good fatigue/abrasion/corrosion resistance
3.Be the bearing,switch,frame
Application:
Electrical, light industry, machinery, building industry, national defense industry
Copper Scrap is industry a important sources of the raw materials All kinds of can be recycled Recycling waste production with copper
Name
Copper Scrap Wire (Millberry) 99.78%
A NALYSIS RESULT
ITEM
S T A NDARD(%)
RESULTS(%)
Purity (Wt%)
99.78
99.9%
CARBON
0.03%
0.03%
COBLET
China GLB industry limited founded in wenzhou, zhejiang, 2015., Specialized in copper product, such as copper braided wire, copper, braided connector, copper flexible connector, copper stranded wire,, copper stranded connector, insulated copper wire, insulated copper, connector, copper lug, copper terminal, copper mesh, cable . Providing, high quality low price, cost-effective goods all over the world and, have good reputation.
China GLB industry limited founded in wenzhou, zhejiang, 2015., Specialized in copper product, such as copper braided wire, copper, braided connector, copper flexible connector, copper stranded wire,, copper stranded connector, insulated copper wire, insulated copper, connector, copper lug, copper terminal, copper mesh, cable . Providing, high quality low price, cost-effective goods all over the world and, have good reputation.
Model NO.: Armoured Power Cable
Voltage: Low and Medium Voltage Cable
Insulation Material: XLPE
Material Shape: Round Wire
Certification: ISO, CCC, CE, VDE, SABS
Brand: Lonheo
Numbers of Cores: 1-5
Class of Conductor: Stranded or Solid
Sheath: PVC,PE,LSZH
Trademark: lonheo
Specification: IEC
HS Code: 8544492100
Application: Construction, Underground, Industrial, Power Station
Current: AC Cable
Sheath Material: PVC
Wire Core Material: Copper or Aluminium
Model: Armoured Power Cable
Rated Voltage: Lower and Medium
Size: 1.5-1000mm2
Insulation: PVC,XLPE
Armoured Layer: Steel Wire,Steel Tape
Package: Steel Drum, Wooden Drum, Steel Wooden Drum
Origin: China
Product Description
General Introduction Of PVC OR XLPE Insulation Armoured Power Cable
Specification
1. Our cables with XLPE or PVC (Polyvinyl Chloride) sheathing are manufactured in accordance with a wide range of IEC International Standards.
2. We supply a range of Qualified and hard-wearing Low to Medium Voltage armoured cables power cables for the supply of mains electricity.
3. These are available with Steel Wire Armour (SWA) Steel Tape Armour (STA) and Aluminium Wire Armour (AWA).
4. The armour provides additional protection, allowing it to be used directly in higher climatic and mechanical stress environments such as direct burial, outdoors, or underground. The armour also enables the cable to withstand higher pulling loads.
Characteristic
1. Rated Voltage: 0.6/1KV,3.6/6KV~26/35KV
2. Numbers Of Cores: 1,2,,3,4,5,3+1,4+1,3+2
3. Nominal Cross-sectional Area: 1.5-1000, (As your requirement)
4. Conductor Material:
6mm2, Plain or Annealed Stranded Copper(CU) or Plain Aluminium(AL)
6mm2, Plain or Annealed Stranded Copper(CU) or Aluminium(AL)
5. Conductor Classification:
The conductor have been divided into 2 classes.
Class 1:Solid Conductor
Class 2:Stranded Conductor
6. Insulation Material:XLPE or PVC
XLPE: a crossed-linked polyethylene (XLPE) insulation provides thermal stability, good water resistant qualities and excellent electrical properties.
PVC: polyvinyl chloride (PVC) is employed in order to create a protective barrier between the inner and outer layers of the cable.
7. Armoured: a steel or aluminium armour (SWA / AWA) provides mechanical protection to allow the cable to withstand the mechanical stresses to which it is exposed.
8. Sheath Material(if have):PVC or PE or Polyolefin
PVC: the constituent parts of the cable are held together in a black PVC sheath offering a further level of protection. Black sheaths can be carbon loaded for UV stability.
Type & Structure:
1. Copper Core-CU
1.CU Core /PVC Insulation/SWA/PVC Sheath
2. CU Core /PVC Insulation/STA/PVC Sheath
3. CU Core /PVC Insulation/AWA/PVC Sheath
4.CU Core /XLPE Insulation/SWA/PVC Sheath or Polyolefin Sheath or LSZH Sheath
5. CU Core /XLPE Insulation/STA/PVC Sheath or Polyolefin Sheath or LSZH Sheath
6. CU Core /XLPE Insulation/AWA/PVC Sheath or Polyolefin Sheath or LSZH Sheath
2. Aluminium Core-AL
1.AL Core /PVC Insulation/SWA/PVC Sheath
2. AL Core /PVC Insulation/STA/PVC Sheath
3. AL Core /PVC Insulation/AWA/PVC Sheath
4.AL Core /XLPE Insulation/SWA/PVC Sheath or Polyolefin Sheath or LSZH Sheath
5. AL Core /XLPE Insulation/STA/PVC Sheath or Polyolefin Sheath or LSZH Sheath
6. AL Core /XLPE Insulation/AWA/PVC Sheath or Polyolefin Sheath or LSZH Sheath
Size:1.5-1000mm2
Package:Steel Drum,Wooden Drum,Steel Wooden Drum
Numbers of Cores:1-5
Date of delivery:10-15 days one container after received deposit
Inner packing: winding wire with plastic spools (PT2-PT200) according to different diameters
Outer packing: Wooden pallet and wooden case or according to customers' special requirement.
Copper clad aluminum wire adopts advanced cladding welding manufacturing technology, the high quality copper strip concentrically coated on the outer surface of the conductor, such as aluminum rod or wire and copper layer and the core formed between firm metallurgical bonding between the atoms. Make the combination of two different metal materials as an integral whole, can be like processing a single wire drawing and annealing process copper and aluminum in the process of drawing with variable diameter ratio, volume ratio of copper layer remained relatively constant.
Due to high frequency signal has the characteristics of the “skin effect”, so the copper clad aluminum wire in the high frequency signal transmission has the same conductivity as pure copper wire.
1.Given the same weight and diameter , Ours Wire measures2.5 times longer than copper wire ,which means 1 Ton pure copper wire should offer 2.5 Ton CCA Wire ,
so reduce the raw material cost much for production factory .
2. According to pure copper wire , the impossibility to separate copper from CCA wire , so it keeps thieves away .
3. CCA wire is more malleable than copper wire , unlike aluminum that would generate the insulation oxide , easier processing and good conductive properties .
4. CCA wire is light weight , easy to transport and installation and construction, to reduce labor costs .
5. CCA wire has significant social benefits , it can save a lot of copper raw resources .
We are suppliers of O.F.H.C. (Oxygen Free High Conductivity Copper) copper of sizes varying from 3mm to 6 mm.
OFHC insures extra high grade of copper wire by oxygen contents of less than 10 ppm (ASTM Standard). OFHC has higher electrical & thermal conductivity, higher recrystallization temperature and higher workability than normal copper rod.
We can provide the best price for export since we have an export obligation to fulfill and henceforth can work out the best price in the market.
We are suppliers of O.F.H.C. (Oxygen Free High Conductivity Copper) copper of sizes varying from 3mm to 6 mm.
OFHC insures extra high grade of copper wire by oxygen contents of less than 10 ppm (ASTM Standard). OFHC has higher electrical & thermal conductivity, higher recrystallization temperature and higher workability than normal copper rod.
We can provide the best price for export since we have an export obligation to fulfill and henceforth can work out the best price in the market.
Product Description :
O.F.H.C. (Oxygen Free High Conductivity Copper) copper of sizes varying from 3mm to 6 mm.
Price of product ( USD price or FOB price) :
USD 6500-6700/MT
Product origin :
Hyderabad, Telangana State , India
Key Specifications/Special Features :
8mm Copper Wire Rod
GRADE: ASME B49, BS 6017
Chemical Composition:
Cu+Ag : 99.99%
Oxygen PPM: 10 MAX.
OFHC insures extra high grade of copper wire by oxygen contents of less than 10 ppm (ASTM Standard). OFHC has higher electrical & thermal conductivity, higher recrystallization temperature and higher workability than normal copper rod. Place of Origin Hyderabad,Telangana State, INDIA
Port Of Loading: Nahva seva Port
Payment Term: 100% against,LC
Delivery Time Shipment within 7-10 working
Minimum Order Size and Packgaing details ;
2500 - 300 KGS
Total Container Capacity : 17 MT- 20MT
Prices for products are negotiable, linked to the quotes of the London Metal Exchange (LME). Prices are fixed on the day of the contract
Product Origin : Uzbekistan
Different product diameters with different performances can be available according to the chemical composition.
Supply the most suitable diameters according to customer requests.
