Ramming mass is commonly used in metallurgy, building materials, non-ferrous metal smelting, chemical, machinery and other manufacturing industries.
Ramming mass is widely used in non-core intermediate frequency furnace and core induction furnace.
As an intermediate frequency furnace ramming material, refractory ramming is applied to melt gray cast iron, nodular cast iron, malleable cast iron, vermicular cast iron, and cast alloy steel; to melt carbon steel, alloy steel, high manganese steel, tool steel, heat resistant steel, stainless steel, molten aluminum and its alloys; to melt red copper, brass, white brass, bronze and its alloys, etc.
Induction furnaces are used for melting cast iron, mild steel and various alloy steels in foundries and making of steel in mini steel plants using sponge iron
The refined high silicon, low iron quartz sand and quartz powder are selected and the fused quartz sand is added as the refractory material., with no slag, no crack, damp proof, convenience of repair, and the corrosion resistance, thus greatly improving the furnace service life span and the economic benefit..
Silica ramming mass can safely be used up to an operating temperature of 1600 deg C. Since it expands very little, it is superior to both alumina and magnesia refractories to resist thermal shocks
Acid ramming material is the premixed ramming mass of the lining material. The acid ramming mass is used to smelt a series of metal materials such as ordinary steel and carbon steel.
The lining practice best suited to a particular furnace depends upon the capacity and design of the furnace, operation practice adopted during making of a heat, and furnace output.
PRODUCT DATA SHEET ACID RESISTANT BRICK
Material : RED SHALE Type Acid Resistant Brick
Size (mm) 230 (LENGTH) X 115 (WIDTH) X 100,76,65,50,40,38,30,25 (THICK)
Specification : ASTM C279, ASTM C410, IS 4860-1982
DESCRIPTION :
We offer premium quality acid resistant bricks Red â?? Shale , tiles and special shapes. We also offer customized sizes as per clients' requirements. Our acid bricks comply with ASTM C279 Type-III, ASTM C410 Type H, L, and Indian Standard 4860 - 1982 Class-I for all applications where low absorption and high acid resistance is required.
FEATURES OF ACID RESISTANT BRICK:
Excellent resistant against wide range of chemicals except hydrofluoric acid, high abrasion resistance, low wearing properties, High Thermal resistant to sudden change in temperature
AREA OF APPLICATION:
Chemical Analysis (Average)
Acid and Alkali Storage Tank Farms
Demineralization plants and Water treatment plants
Chimney inside lining, FGD linings
Towers and Columns
Process Vessels and Tanks
Sewerage Treatment Plants and Lines
Industrial Flooring and Bund Areas
Chimney and Flue Gas Linings
Hoppers and Chutes
SiO266.4
Al2 0324
TiO21.1
Fe2 O31.1
K2 O + Na2 O2.5
NOT RECOMMENDED:
HF acid or other fluoride solutions
Heavy thermal shock
Typical Physical Properties of GANESHAS Acid and Chemical Resistant Brick
Characteristic
RED SHALE ACID RESISTANT BRICK
Test Standard
Bulk Density, gm/cc - 2.3 to 2.35
ASTM C-20 -Water Absorption, % - 0.1 to 1.5 IS 4860-1968
Apparent Porosity, % -0.5 to 1.75 S 4860
Acid Solubility (H2SO4), Loss in Mass,% -0.1 to 1.8 ASTM C-279
Modulus of Rupture, PSI -2133 to 3555 ASTM C-67
Compressive Strength, Kg/cm2 - 700-900 IS 4860-1968
Abrasion Resistant , Volume in mm3 -69 to 85 EN 102
Surface Hardness, MOHS Scale - 7
PRODUCT DATA SHEET ACID RESISTANT BRICK
Material : FIRECLAY Type Acid Resistant Brick
Size (mm) : 230 (LENGTH) X 115 (WIDTH) X 100,76,65,50,40,38,30,25 (THICK)
Specification : ASTM C279, ASTM C410, IS 4860-1982
DESCRIPTION :
* We offer premium quality acid resistant bricks Red â?? Shale , tiles and special shapes. We also offer customized sizes as per clients' requirements. Our acid bricks comply with ASTM C279 Type-III, ASTM C410 Type H, L, and Indian Standard 4860 - 1982 Class-I for all applications where low absorption and high acid resistance is required.
FEATURES OF ACID RESISTANT BRICK:
* Excellent resistant against wide range of chemicals except hydrofluoric acid, high abrasion resistance, low wearing properties, High Thermal resistant to sudden change in temperature
AREA OF APPLICATION:
Chemical Analysis (Average)
Acid and Alkali Storage Tank Farms
Demineralization plants and Water treatment plants
Chimney inside lining, FGD linings
Towers and Columns
Process Vessels and Tanks
Sewerage Treatment Plants and Lines
Industrial Flooring and Bund Areas
Chimney and Flue Gas Linings
Hoppers and Chutes
SiO266.4
Al2 0324
TiO21.1
Fe2 O31.1
K2 O + Na2 O2.5
NOT RECOMMENDED:
HF acid or other fluoride solutions - Heavy thermal shock
Characteristic
Fireclay Type Acid Resistant Brick - Test Standard
Bulk Density, lbs/ft3 - 2.25 to 2.30 ASTM C-20
Water Absorption, % - 0.1 to 1.8 ASTM C-20
Apparent Porosity, % - 4.05 to 4.14 ASTM C-20
Acid Solubility (H2SO4), Loss in Mass,% - 6.1 to 6.8 ASTM C-279
Modulus of Rupture, Mpa - 14.6 ASTM C-67
Compressive Strength, PSI - 15500 to 17250 ASTM C-67
Abrasion Resistant , Volume in mm3 - 71 to 96 EN 102
Surface Hardness, MOHS Scale - 7
Thermal Conductivity, BTU-in/hr-ft-F - 6.94 to 7.12 ASTM C-236
Thermal Expansion Coefficient,in/in/Fx10-6 - 2.6 to 2.8 EN 103
JH Glass shower door is produced with several types of raw glass. The current modern design trend has given us more choice on glass types, colors, and patterns. Shower door glass is made by tempered glass, with excellent drilling, cutouts, polished edge.
Products series :
Tempered clear glass
clear glass is the most ordinarily used option for shower enclosures, low cost and easy clean
Tempered raindown/nashiji pattern glass
The pattern bring distinctive decorative on glass surface
Let the glass in high opacity ,guarantee a higher level of privacy
One side of the glass is patterned ,and the other side is flat for easier cleaning
Tempered acid etched glass/ gradient change glass
Processed on base of acid etched glass
The opaque and satin surface bring artistic effect
Gradient change is an interesting new decorative products ,and rapidly accepted by modern shower door designs.
Tempered low iron glass
High light transparent with colorless appearance
The glass blue edge makes the whole shower enclosure in high grade
Tempered glass with anti-limescale coating
For preserve the functional and aesthetic properties of shower glass , JHG offer coated glass for avoid damage caused by water sediments.
Size of 9 square wave polycarbonate roofing sheets
Width: 1070mm
Thickness: 0.65mm - 1.5mm
Common length: 6m
Especially, providing the length according to the individual requirements of each customer
MATERIAL: PC natural 100% pure pc without any coating
CATEGORY: PC
TYPE: Natural
SPECIFICATION: Separate 25 kg bag and Mark per month 78 mt 100% pure pc without any coating ,post Industrial materials
Origin: Bangladesh
LOADING WEIGHT: 24 Ton
FOB (USD/Ton): 1450$ - 1700$
Packaging: Jumbo Bag
Est. Shipping Time: 15, 30, 45 days
Our Commitment
We are committed to delivering in accordance with the quality given, source and licensed in the field of scrap transportation.
2Lians always for the purpose of satisfying customers on the criteria of sustainability and fairness through high work efficiency
Technical characteristics of SkyLite polycarbonate awning:
* Using materials are SkyLite polycarbonate panels with UV resistance, high light transmission, sound insulation, good heat insulation.
* Negative link between the frame and the plate, minimizing the screw holes on the surface, avoiding the leak through the screw hole and high aesthetics.
Simple to transport and install, save time in construction and installation.
* Environmentally friendly, safe for users.
Fruits like apples, oranges, papaya, pear, lemon, kiwi, loquat, melon, vegetables like potatoes, garlic, tomato, ginger, carrots, cucumber, pepper, onion, garments, face mask, coffee beans, windows and doors (a different kind), glasses (different of glasses), sun houses, wooden pellets furniture, pet products kids toys.
The SD1000 Full Hydraulic Core Drilling Rig is a robust piece of equipment designed for various drilling applications Lets dive into the details
Application Range The SD1000 crawler drill is primarily used for both diamond bit drilling and carbide bit drilling Its commonly employed in geological exploration mineral prospecting and core sampling
Specifications
Drilling Diameter 56 mm 71 mm 89 mm 114 mm 2 in 3 in 4 in 4 in
Drilling Depth 200 m 400 m 600 m 1000 m 65602 131204 196806 328010
Overall Length Working 5760 mm 227 in
Overall Width Working 2400 mm 94 in
Overall Height Working 9000 mm 354 in
Hole Range 65 89mm
Engine Power 156ps 115kw 2200rpm
Machine Weight 12400 kg 273373 lb
Motor Power 132 kW 17947 hp
145599 Construction Materials Suppliers
Short on time? Let Construction Materials sellers contact you.
