Find Verified Construction Materials Suppliers, Manufacturers and Wholesalers

This is chemical setting Furan based chemical resistant mortar which is combination of Liquid and Powder, when mixed in proper proportion from workable mortar which after setting and curing give of liquid and give black highly cross linked composites.

Furan When set and cured is resistant to highly corrosive acids, alkalis and to powerful organic solvents such as ketones, Aromatic and Chlorinated solvents. It has extreme resistant to Acidic & alkalis, Salts, Greases and Detergents. It resists to Organic & Inorganic acids at their boiling temperature. It is suitable against mild chlorine Gas (dry) phosphorous trichloride, pyridine at room temperature.
Furan is especially useful where resistance to mixed media such as aqueous acids /alkalis and organic solvents is needed in chemical plant process and waste streams. Carbon filled Furan is used against corrosive effect of hydrofluoric acid & its salts.

PREPARATION OF FURANE MORTAR :
Mortar consist of Furan solution and Furan powder. The average mixing ratio necessary to obtain mortar with good working consistency is 1 part by weight Solution & 3 part by weight powder. The ratio will vary slightly depending on temperature and working conditions.Stir the liquid thoroughly before using. Place liquid in a suitable shallow mixing pan. Add powder by weight in the solution mix thoroughly and rapidly until all lumps are dispersed and the mortar is completely homogenous. Spread out the mortar in a thin layer, not more than ¾ thick, to dissipate the heat of reaction and lengthen the working life.
Batch size can be varied depending upon the temperature and the speed with which the masons are working. Very large batches will become stiff quite rapidly. Make sure that all the Furan Motrar is used from the pan before another batch is mixed.When working at temperature above 40 C, very small batches not more than 2 Kgs, should be prepared. When working at temperature below 15C the liquid should be kept warm.

Mitsubishi MG400 Motor Grader Specifications
Main Specifications
Blade Width: 3710mm (standard blade width)
Steering System: ATC
Weight & Loads
Operating Weight: 13,100kg
Front Axle Load: 3,700kg
Rear Axle Load: 9,400kg
Dimensions
Overall Length: 8490mm
Overall Width: 2400mm
Overall Height: 3360mm
Wheelbase: 5910mm
Tandem Wheelbase: 1520mm
Ground Clearance: 355mm
Engine
Manufacturer: MTB
Model: 6D22C
Rated Output: 110.3kW (150 PS) @ 2000rpm
Cylinders: 6
Bore x Stroke: 130 x 140mm
Displacement: 11.2liters
Hydraulic System
Output Pressure: 17.2MPa
Oil Flow Rate: 128L/min
Transmission
Type: DPS
Speeds: 6 forward / 6 reverse
Max Travel Speed: 45.0km/h (forward), 45.4km/h (reverse)
Tires
Front: 13.00-24, 14-ply
Rear: 13.00-24, 14-ply
Performance & Other Features
Operation Type: Hydraulic (HYD)
Scarifying Width: 1225mm
Minimum Turning Radius: 6900mm
Articulate Angle: 25
Fuel Tank Capacity: 230L
Optional Equipment: BL(4000), S/C

The snow removing equipment is the necessary equipment of snow cleaning for farm,orchard, schools, parks, squares, residential areas, garden, lanes sideways, bridges and other key securing sites and widely used in snow winter. This equipment could improve the efficiency of snow removal, reduce labor intensity, and ensure pepole going out more safety and convenient.

1).The road sweeper can be matched to tractor,wheel loader,forklift,
2).powered by hydraulic output of these machinery,only tractor could be driven by PTO.
3).PP with steel wires brushes.
4).Working width from 1200 to 2500mm
5).Suitable for cleaning road,street,floor and other flat.

*The engine adopts famous brand engine, 100% inspection before delivery.
*The Snow Cleaning Machine adopts full metal jacket design,after oxidation spray,anti-corrosion rust proof,long service life.
*Double LED lamp of operation panel, greatly improving the workers efficiency and safety at night and early morning.
*The Snow Cleaning Machine uses monolithic auger design, low cost of vulnerability consumption and easy replacement.
*The Snow Cleaning Machine has the advantages of fashion appearance,mult functions, light and flexibility,simple operation.

Cantilever Pay Off & Take Up Stand

Guide Roller Stand

Haul-Off Caterpillar

Arm System

Calcium Silicate compound is obtained by reaction of Silica & Calcium oxide. This compound is commonly used to insulate high temperature Pipe, equipment & for fire endurance application.

Calcium Silicate have high compressive strength, resistance to damage from tumbling, ability to maintain its properties without loss of insulating efficiency, are rigid, reusable, light in weight and have long life.

The CAT988 with the 3408 engine is a powerful machine designed for heavy-duty applications, including container handling. Here are some key specifications:
Engine: CAT 3408 DITA (Direct Injection Turbocharged Aftercooled)
The CAT 3408 engine is a V8 engine, meaning it has 8 cylinders arranged in a V configuration.
Net Power: 538 hp (SAE J1349:2011)
Engine Power: 580 hp (ISO 14396:2002)
Gross Power: 588 hp (SAE J1995:2014)
Maximum Capacity: 50,000 pounds (as indicated on the boom arm in the image you provided)
Fuel Efficiency: Features like Economy Mode help save on fuel while maintaining productivity
Durability: Built with advanced filtration systems for extended performance and reliability
Productivity: Superior digging, higher bucket fill factors, and reduced dig times

Caterpillar Machinery Parts

Enhance Your Perimeter: Exploring Top-Quality Chain Link Fence Fittings by Him Overseas
In the realm of security and aesthetics, Chain Link Fence Fittings play a pivotal role in fortifying your perimeters. At Him Overseas, we take pride in presenting an extensive array of these fittings, meticulously designed to elevate your fencing solutions. Let's delve into the world of durable, high-grade fittings that redefine security standards.

Unveiling the Arsenal: Him Overseas' Chain Link Fence Fittings Selection
1. Fence Bands
2. Fence Wheel Carriers
3. Fence Clamps
4. Fence Collars
5. Fence Gate Rollers
6. Fence Hardware Fittings
7. Fence Metal Ornamental Fittings

The Him Overseas Advantage As an ISO 9001:2008 certified organization, Him Overseas is committed to delivering Chain Link Fence Fittings of optimum quality. We understand the diverse needs of our clients and manufacture our fittings using high-grade stainless steel and other metals. The result? Chain Link Fence Fittings that boast superior physical and mechanical properties, ensuring resilience in adverse environments.

Your Trusted Partner in Fencing Solutions Him Overseas stands as a beacon in the industry, recognized as one of the leading Manufacturers and Exporters of Chain Link Fence Fittings. We take pride in offering the largest supply of fittings, catering to all customers with affordability as a core principle.

Wooden Fencing
Species : Keruing , Kapur/Kamper , Bangkirai , Meranti
Sizes : 1800 x 1800mm

Product Name

Cement Brick Making Machine
Color

As Picture
Application

Buliding Construction
Quality

High Quality

The Ground Granulated Blast Furnace Slag (GGBS/GGBFS) is a type of eco-friendly green building material and high quality secondary cementitious material for concrete and cement. It is recognized as one of the best secondary cementations material for building high durable concrete stricture in the world today! GGBS has taken over a top place of high-performance cement and concrete mineral additives with its unique characteristics of hydration, low-price raw material. GGBS is obtained by quenching molten iron blast furnace slag (a by-product of iron and steel making) in water or steam. It is then further grounded into the desired fineness in terms of the required particle size distribution. The main components of blast furnace slag are CaO (30-50%), SiO2 (28-38%), Al2O3 (8-24%), and MgO (1-18%). The other important aspect of GGBS is its superiority in concrete durability which extends the lifespan of buildings from fifty years to a hundred years.

APPLICATIONS

Soil stabilization
Mortar
Used in combination with Portland cement
Pre-cast concrete
Ready mix concrete
Specialist projects