Our tubing anchor anchor the tubing string in a rod pumping well .The tubing anchor effectively reduce rod, tubing, and casing wear. This cuts operating costs. Elimination of breathing and buckling of the tubing string also increases production by lengthening the effective stroke of the pump, which increases volumetric efficiency. Based on proven technology, the Anchor uses hydraulically activated hold-down slips to provide an anchoring point for the tieback or workstring during stimulation operations. These tubing anchors are the most economical and effective insurance you can buy against premature repairs and downtime.
Hello, this is Ashary from Changhong Drill in China. We manufacture high, medium and low air-pressure DTH hammers and drill bits, concentric and eccentric drilling system, tunnel TBM cutter, various threaded drill bits and shank adapter, coupling sleeve, drill pipe and rock drilling accessories. ashary.you at g mail dot com whatsapp:+86-13873343601
Hello, this is Ashary from Changhong Drill in China. We manufacture high, medium and low air-pressure DTH hammers and drill bits, concentric and eccentric drilling system, tunnel TBM cutter, various threaded drill bits and shank adapter, coupling sleeve, drill pipe and rock drilling accessories. ashary.you at g mail dot com whatsapp:+86-13873343601
Changhong Drill manufactures high, medium and low air-pressure DTH hammers and drill bits, concentric and eccentric drilling system, tunnel TBM cutter, various threaded drill bits and shank adapter, coupling sleeve, drill pipe and rock drilling accessories. All of our products are compatible with world famous brand products such as Atlas, Ingersoll Rand, Sandvik. They are widely used in construction sites of mining drilling, ground excavating, tunnel drivage, transportation, irrigation works and hydropower, water well, foundation treatment, exploration, applicable for rock drilling and cutting tools under various geological conditions.
Hello, this is Ashary from Changhong Drill in China. We manufacture high, medium and low air-pressure DTH hammers and drill bits, concentric and eccentric drilling system, tunnel TBM cutter, various threaded drill bits and shank adapter, coupling sleeve, drill pipe and rock drilling accessories. ashary.you at g mail dot com whatsapp:+86-13873343601 dth hammer dth bits down the hole hammer dth drilling button bit dth hammer bit hammer bit well drilling equipment water well drilling equipment dth drilling machine down the hole hammer drill large drill bits short drill bits water drilling rig downhole drilling tungsten drill bit air hammer drill rock drilling machine industrial drill bits hydraulic drill rock drill for sale rock drilling equipment drill pipe for sale reverse circulation drilling rock drilling tools dth machine rock bit rotary drilling tools rotary drill bit oil drill bit drill bit manufacturers hydraulic drilling machine dth drilling rig hole bit rock hammers for sale water well drill bits one dth hammer drill bit sizes drill stem pipe atlas copco hammer broca triconica rc hammer drilling supplies blast hole drilling mining drill bits hard rock drilling hammer manufacturers drilling holes in rocks international drilling equipment hard rock tools
Hello, this is Ashary from Changhong Drill in China. We manufacture high, medium and low air-pressure DTH hammers and drill bits, concentric and eccentric drilling system, tunnel TBM cutter, various threaded drill bits and shank adapter, coupling sleeve, drill pipe and rock drilling accessories. ashary.you at g mail dot com whatsapp:+86-13873343601 rockmore international dth technology drill bit shank types numa hammers bulroc halco rock tools borehole drill bit drilling into rock down the hole downhole drilling tools dth images secoroc bithammer dth logo rc bits roc tech dth exhaust what does dth mean dth drill bit dth hammer price dth hammer drilling dth tools dth hammers and bits dth hammer manufacturers rock drill bits manufacturers down the hole hammer for sale dth hammer for sale down hole hammer bits dth button bits dth drilling machine specification button bits manufacturers rock tools drilling equipments atlas copco dth hammers hole hammer dth drilling equipment rock drilling equipment manufacturers rock hammer drill bits rock hammer drill dth products atlas copco hammer bits button drill bit hammer drill bits for rock button bits rock drilling atlas copco drill bits dth bits manufacturers dth installation tools dth drilling system rok hammer drill tapered button bit borewell drilling hammers dth equipment dth drill rods dth button bits manufacturers carbide buttons water well drill bits for sale rock drilling bits for sale convex drill bit atlas copco dth hammer well drilling tungsten carbide button bits suppliers down the hole drilling machine dth rotary drilling ballistic button bits dth hammer button bits water well drilling hammer bit button water hammer drilling hole drilling equipment concave drill bit dth world dth sales button bits suppliers hammer hole carbide button bits button bit sharpener hammer bit drilling secoroc drill bits dth boring machine atlas copco bits dth machine price tungsten carbide buttons carbide buttons manufacturer dth hammer working principle atlas copco secoroc dth manufacturer
Processing ability: 90-450t/h Max feeding size: 350mm Product Fineness: 0-200mm Range of application: Almost all minerals, such as quartz, feldspar, mica, calcite, gypsum, fluorite, limestone, soil, clay, marble, granite, pebble, coal, slag, iron ore, copper ore, manganeseore, refractory material, glass, etc. Brief Introduction of PFW Impact Crusher: Base on the plentiful experience of producing and marketing of impact crusher, Shanghai Clirik R&D institution designed the PFW series impact crusher. It is the newest style impact crusher and has been widely used in many industries, like chemical, metallurgy, road and bridge construction and sand making and so on. Working Principle of PFW Impact Crusher: Benefit of PFW Impact Crusher: a, Advanced Manufacture process and high-end fabrication material b, Heavy rotor design and tight test method improve the rotor performance. c, Overall type cast steel structure bearing base improves anti load resistance capacity. d, Hydraulic jacking device and hydraulic regulated discharging port is helpful to save labor and time.
Processing ability: 150-500t/h Max feeding size: 290mm Product Fineness: 10-30mm Range of application: Almost all minerals, such as quartz, feldspar, mica, calcite, gypsum, fluorite, limestone, soil, clay, marble, granite, pebble, coal, slag, iron ore, copper ore, manganeseore, refractory material, glass, etc. Brief Introduction of HPC cone crusher: Base on the latest technology and decades of years' producing experience, Clirik designed the HPC series cone crusher. It has excellent crushing efficiency and good hydraulic control system. Now the HPC series cone crusher has wide application in secondary crushing of many kinds of mining and rock, etc. Benefit of HPC cone crusher: 1. Large reduction ratio, high production efficiency; 2. Less consumption of wearing parts, low operating costs; 3. Pyramid broken, perfect of product shape; 4. Hydraulic protection and hydraulic pressure cavity clear high degree of automation to reduce downtime;
Processing ability: 27-660t/h Max feeding size: 275mm Product Fineness: 10-100mm Range of application: Almost all minerals, such as quartz, feldspar, mica, calcite, gypsum, fluorite, limestone, soil, clay, marble, granite, pebble, coal, slag, iron ore, copper ore, manganeseore, refractory material, glass, etc. Brief Introduction of HCS cone crusher: HCS series single cylinder cone crusher with hydraulic-driven system is a kind of new type high efficient crushing equipment which is developed by Clirik engineers through over 20 year's effort of design, manufacture, sale, and after-sale service in crushing industries. It is widely used in primary crushing, secondary crushing, tertiary crushing and fine crushing. Benefit of HCS cone crusher: 1. High production capacity and excellent grain type of output product 2. Special bearing design for much more carrying capacity and longer life 3. Enhanced body design makes it quite reliability 4. Easy to adjust discharging opening and to maintain by using optimized hydraulic lubricatio
Processing ability: 27-1400t/h Max feeding size: 369mm Product Fineness: 3-100mm Range of application: Almost all minerals, such as quartz, feldspar, mica, calcite, gypsum, fluorite, limestone, soil, clay, marble, granite, pebble, coal, slag, iron ore, copper ore, manganeseore, refractory material, glass, etc. Brief Introduction of CS cone crusher: CS Cone crusher is quite excellent in hard material crushing and the final product has good sharp. The innovations like stable lubrication system and excellent sealing system evidently reduce the production cost, helping you to achieve the highest level of profitability. It is applied to cement mill, mining, building construction, road &bridge construction, railway construction and metallurgy and some other industries. Materials like iron ore, granite, limestone, quartzite, sandstone, cobblestone and some others are easily crushed by cone crusher. Benefit of CS cone crusher: 1. High yields and high grade final products. 2. With grease seal and upstage sealing element imported from Japan, provide sturdy guarantee for long-playing stable operation of machine. 3. Overload protective system can effectively ensure safety of crusher. 4. Easy to control discharging size by using different crushing cavity and adjusting device.
Processing ability: 30-160t/h Max feeding size: 800mm Product Fineness: 0-50mm Range of application: Almost all minerals, such as quartz, feldspar, mica, calcite, gypsum, fluorite, limestone, soil, clay, marble, granite, pebble, coal, slag, iron ore, copper ore, manganeseore, refractory material, glass, etc. Brief Introduction of Cabinet hammer crusher: Cabinet hammer crusher with feature of large feeding space, it is very suitable for processing big raw material with size 450-1400mm to small granularity below 100mm, which are widely used for mine, cement, building material, chemical industry and so on. It is suitable for crush raw materials with compression strength not more than 200Mpa, such as limestone, rock, plaster, coal gangue etc. Working principle of Cabinet hammer crusher: In cabinet hammer crusher gravity, hammers do high-speed circular motion along with rotors driven by motor. After being fed into crusher, large stones are stacking on the shelf which is particular to box crusher. Raw materials are smashed into smaller pieces by hammers. Right following the fist crushing, unqualified pieces hit against the impact plate with new fed material at a tangent to circular motion of Hammers. So once for all, material undergo two steps of crushing, from coarse to medium size then to qualified small size. Finished product are sieved through screen and discharged at a uniform particle size. Benefit of Cabinet hammer crusher 1.Large feeding size, high crushing ratio, uniform particle size, 2.The finished size can be adjusted, high productivity. 3.Durable hammers, turning type cabinet, easy maintenance. 4.Coarse and medium reduction in one time, which simplified sand-making process.
Processing ability: 50-260t/h Max feeding size: 350mm Product Fineness: 0-200mm Range of application: Almost all minerals, such as quartz, feldspar, mica, calcite, gypsum, fluorite, limestone, soil, clay, marble, granite, pebble, coal, slag, iron ore, copper ore, manganeseore, refractory material, glass, etc. Brief Introduction of PF Impact crusher: By absorbing the advanced technology from the world, Shanghai Clirik researched and designed PF series impact crusher. It can be used to deal with materials whose size below 500mm and whose compression strength less than 360Mpa. Thus, it is widely used in many industries, like chemical, metallurgy, road and bridge construction and sand making and so on. Working Principle of PF Impact Crusher: Benefit of PF Impact Crusher: 1.High efficient Long service life 2.Strong structure Steady performance 3.Good final products Discharging opening is adjustable 4.No-board connection Easy to disassembly and maintain
Processing ability: 5-30t/h Max feeding size: ï¼?350mm Product Fineness: 5-30mm Range of application: Almost all minerals, such as quartz, feldspar, mica, calcite, gypsum, fluorite, limestone, soil, clay, marble, granite, pebble, coal, slag, iron ore, copper ore, manganeseore, refractory material, glass, etc. Brief Introduction of PC Hammer Crusher: PC Hammer crusher is equipment using high-speed rotary hammers to crush materials, mainly applied to the industries of metallurgy, mining, chemistry, cement, construction, refractory materials and ceramics. It can crush hard and soft ores into medium or small size, such as barite, limestone, gypsum, terrazzo, coal, slag, and up to 100 different kinds. Working Principle of PC Hammer Crusher: PC Hammer crusher mainly consists of frame, rotor, support iron and grate bars. The frame is divided into two parts: upper part and lower part which are welded by steel plates after being cut. Liners made of high manganese steels within the frame can be replaced after being worn out. The rotors consist of the turn plate, pin shafts, and hammers which are grouped regularly in the main shaft. The motor drives the rotors to rotate quickly in the crushing cavity, and hammers spread outward as a result of centrifugal force from the rotation of the rotors. Large materials entering the crusher through the feed inlet are stricken, impacted, cut and ground by the high-speed hammers to small size. Qualified materials crushed will be screened out and exit from the gap of the grate bars while the unqualified will be left in the crushing cavity to be further hammered and ground until reach the standard size. The size of the final product can be adjusted by changing the grate bars. The gap between the rotors and the grate bars can also be adjusted according to different requirement. Benefit of PC Hammer Crusher: 1.high capacity, high crushing ratio 2.uniform particle size, simple structure 3.Low investment, easy management and maintenance.
JK830 All-In-One DTH Automatic Drilling Rig Crawler Mounted Hydraulic DTH Drilling Rig Hydraulic Crawler Drills. Crawler Mounted Drilling Rigs JK830, the new all-in-one DTH drilling rig which features JK Drilling's latest automation technology, is efficient, reliable and easily operational. With a FOPS-approved cabin coming standard, the rig is also equipped with automatic pipe exchanger and widened heavy-duty undercarriage that can provides both fast maneuver and better safety. The hydraulic dust collector meets the requirement of environment protection and is a reliable solution to modern mining with less environmental impacts. More information you can views here Items Specs Unit Value Body Weight kg 24000 Length mm 9785 Width mm 3200 Height mm 3500 Undercarriage Track length mm 3646 Ground contact length mm 2875 Track center distance mm 2200(whole width 2700) Track width mm 500 Ground clearance mm â?¥400 Track oscillation ° ±10° Walking motor Eaton Walking speed Km/h 1.8(low), 2.95(high) Max. tractive force KN 170 Grade ability ° 20° Engine Model QSZ13-C450-30 (Cummins) Type Water-cooled six-cylinder EFI diesel engine Rated power Kw/RPM 335/2100 Fuel tank capacity L 760 Hydraulic pump/valve Main pump Variable load-sensing piston pump Main valve Load-sensing valve Manufacturer Rexroth Air compressor Model Airman SK900 Type Dual stage rotary screw air compressor Working pressure bar 17.5 (medium), 24 (high) Max. air delivery m3/min 23.5 Rotary motor Hydraulic rotation unit Dual motors (Eaton) Rotation rate rpm 0-70 Max. rotation torque N.m 3900 Feeding method Motor-driven planetary gearbox + Chain Fast feeding rate m/ min 30 Feeding rate m/ min 4.7 Max. lifting rate m/ min 5.5 Feeding force kN 0-30 (adjustable) Lifting force kN 30 Feeding boom Length mm 8500 Feeding stroke mm 5500 Feed extension mm 800 Swing angle ° Left 95°, right 35° Drilling arm Type mm Telescopic single straight boom (length 760mm) Tilt angle ° 30°(up), 10°(down) Swing angle ° Left(cabin side)10°, Right 35° Pipe exchanger Pipe diameter mm 102/114 Pipe length m 5 Drilling diameter mm 115-203 Drilling depth m 30 Pipe capacity pc 5+1 Hammer specs 5"/ 6" Dust collector Filter element 20 Collecting method Air pulse jet Dust cover Sliding
JK610 Crawler Mounted Blasting Borehole Drilling Rig Crawler Mounted Hydraulic DTH Drilling Rig borehole drilling machine In contrast with pneumatic drill rig, the air displacement of matched air compressor reduces 30% to 50%. JK610 internal combustion (electric) crawler mounted hydraulic DTH drill rig, is the latest updated product of "Sharp Sword" series, featuring its better performance, lower operation cost and humanized design. It adopts a 70kW Yuchai diesel engine and hydraulic oil pump station assembly to generate power, allowing rigs to rotation, propelling, lifting, walking and angle positioning. During operation, only the percussive hammer consumes the compressed air. In contrast with conventional pneumatic drilling rigs, JK610 consumes about 40% to 50% less energy (oil or electricity), and the air displacement of matched air compressor decreases 30% to 50%. JK610 is equipped with dust collecting system, and wet type dust collector is optional as long as water is accessible on site. JK610 is mainly applicable to blasting borehole drilling process of hydro project, open pit mining, quarrying, road construction and defense project. Model JK610 Borehole diameter 90-165mm Borehole depth 50m Applicable rock hardness f=6-20 Working air pressure 1.2-2.4MPa Air consumption 11-21m³/min Feeding stroke 4148mm Rod-changing length 3m Max. horizontal drilling height 3370mm Rotation rate 0-60rpm Rotation torque 3000Nm Travle speed 2Km/h, 3Km/h Grade ability 30° Power Yuchai 70KW Dust collector (optional) Hydraulic dry dust collector Wet dust collector Dimension (LxWxH) 7000mmÃ?2000mmÃ?2500mm Weight 6900kg Wired remote control Optional
Crawler Mounted Hydraulic DTH Drilling Rig Crawler Mounted DTH Drill Rig, Crawler Mounted Drilling Rigs Low operation cost and humanized design. Borehole Diameter 90-165mm Site Condition It is applicable to the blast hole drilling process of hydro project, open pit mining, quarrying, road construction and defense project. Product Features JK590C / JK590 are the new generation of internal combustion (electric) crawler mounted hydraulic DTH drilling rig, the latest updated version of JK590 series. In contrast with the last generation, they feature lower operation cost and humanized design. They adopt a 70kW Yuchai diesel engine and hydraulic oil pump station assembly to generate power, allowing rigs to rotation, propelling, lifting, walking and angle positioning. During operation, only the percussive hammer consumes the compressed air. In contrast with conventional pneumatic drill rigs, JK590C/JK590 consume about 40% to 50% less energy (oil or electricity), and the air displacement of matched air compressor decreases 30% to 50%. Compared with JK590, JK590C is additionally equipped with dust collection system, and wet type dust collector is optional once water is accessible on site. JK590C/JK590 are mainly applicable to blasting borehole drilling process of hydro project, open pit mining, quarrying, road construction and defense project. Model JK590 Borehole diameter 90-165mm Borehole depth 50m Applicable rock hardness f=6-20 Working air pressure 1.2-2.4MPa Air consumption 11-21m³/min Feeding stroke 4138mm Rod-changing length 3m Max. horizontal drilling height 3370 Rotation rate 0-80rpm Rotation torque 3000Nm Travle speed 2Km/h, 3Km/h Grade ability 24° Power Yuchai 70KW/Cummins 74KW (optional) Electric motor 45KW Dust collector (optional) Hydraulic dry dust collector Wet dust collector Dimension (LxWxH) 7000mm x 2200mm x 2100mm Weight 6500kg
JK520 Crawler Mounted Hydraulic DTH Drilling Rig Crawler Mounted Hydraulic DTH Drilling Rig Crawler Mounted Drilling Rigs, Crawler Mounted DTH Drill Rig It features its compact design, small footprint, and humanized operation. Borehole Diameter 90-150mm Site Condition It is applicable to the blasting borehole drilling process of hydro project, open pit mining and road construction. Product Features JK520 internal combustion (electric) crawler mounted hydraulic DTH drilling rig is the latest updated product of the "Sharp Sword" series, specially designed for the hydropower project and quarry mining project. JK520 can drill boreholes of various angles, ranging from horizontal angle to vertical angle. It boasts its better performance, compact design, small footprint and humanized operation. JK520 is equipped with environment-friendly dry type dust collector, and as long as water is accessible on working site, wet type dust collector is optional. Model JK520 Borehole diameter 90-150mm Borehole depth 40m Applicable rock hardness f=6-20 Working air pressure 1.2-2.4MPa Air consumption 11-21m³/min Feeding stroke 3865mm Rod-changing length 3m Max. horizontal drilling height 2510mm Feed extension 1200mm Ground clearance 300mm Rotation rate 0-79rpm Rotation torque 2500Nm Travle speed 2Km/h, 3Km/h Grade ability 25° Power Yuchai 70KW Dust collector (optional) Hydraulic dry dust collector Wet dust collector Dimension (LxWxH) 7000mmÃ?2250mmÃ?2250mm Weight 5800kg Wired remote control Optional
Crawler Mounted Hydraulic DTH Drilling Rig Automatic Crawler Mounted DTH Drill Rig, Crawler Mounted Drilling Rigs Advanced Technology, easy to handle and operate. Borehole Diameter 105ï½?305mm Site Condition CM458 is applicable to all kinds of anchor supporting operation, grouting hole drilling for cofferdam, dam, and base reinforcement. Newly designed hydraulic clamp makes operation easier. Product Features CM458 internal combustion (CM458D Electric) crawler mounted versatile anchor rig adopts diesel engine and hydraulic oil pump assemblies to provide power, allowing rigs to finish moving, rotating, propelling and lifting, as well as angle positioning. During drillingï¼?only the percussive hammer consumes compressed air. CM458 is applicable to all kinds of anchor supporting operation. In addition, the rig is also applicable to the grouting hole drilling for cofferdam, dam, and base reinforcement. Newly designed hydraulic clamp is a very useful device making operation easier. Model CM458 Borehole diameter 105-305mm Borehole depth 200m Applicable rock hardness f=6-20 Working air pressure 1.2-3.5MPa Air consumption 16-40m/min Feeding stroke 3300mm Rod-changing length 3m Ground clearance 254mm Rotation rate 0-50rpm Rotation torque 5400Nm Travle speed 2Km/h Grade ability 24° Power Yuchai 70KW/Cummins 74KW Electric motor 45KW Dust collector (optional) Hydraulic dry dust collector Wet dust collector Dimension (LxWxH) 6900mmÃ?2200mmÃ?2200mm Weight 6200kg
Crawler Mounted Hydraulic DTH Drilling Rig Crawler Mounted DTH Drill Rig, Hydraulic Crawler Drills In contrast to the pneumatic drilling rig, energy consumption (diesel or electricity) saves about 40% to 50%. Borehole Diameter 90-165mm Site Condition CM358A crawler mounted hydraulic DTH drilling rig is mainly applicable to the blast hole drilling process of open pit mining, quarrying, hydropower project and road constructions. Product Features CM358A crawler mounted hydraulic DTH drilling rig adopts diesel engine (or electric motor) and hydraulic oil pump assembly to provide power, allowing rigs to finish moving, rotating, feeding and lifting, as well as angle positioning. During operation only the percussive DTH rigs consumes compressed air and in contrast to the conventional pneumatic rigs, CM358A saves about 40%~50% of total energy. Model CM358A Borehole diameter 90-165mm Borehole depth 50m Applicable rock hardness f=6-20 Working air pressure 1.2-2.4MPa Air consumption 11-21m³/min Feeding stroke 3820mm Rod-changing length 3m Max. horizontal drilling height 3370mm Rotation rate 0-80rpm Rotation torque 3000Nm Travel speed 2Km/h Grade ability 24° Power Yuchai 70KW/Cummins 74KW Electric motor 45KW Dust collector (optional) Hydraulic dry dust collector Wet dust collector Dimension (LxWxH) 6900mm Ã? 2200mm Ã? 2200mm Weight 6100kg
Crawler Mounted Versatile Well Drilling Rig Truck Mounted Well Drilling Rig Its smaller size can be adapted to various construction sites. Rated Drilling Depth 300m Application It is applicable to the drilling process of water wells, monitor wells and geothermal wells, etc. Product Features JKS300B crawler mounted versatile well drilling rig is a new type of efficient and versatile hydraulic rig. It is mainly applicable to the drilling process of water wells, monitor wells, and geothermal wells. When drilling in the rock layer, the rig adopts DTH hammer for penetration and compressed air for cleaning, with a penetration speed being dozens of times quicker than conventional rotation rigs. In loose rock, the rig employs a cutting bit or cone bit and uses mud to clean the dirt, its versatility suiting for all kinds of complex geological conditions. Winch can lift stuff upwards of 6m, facilitating installing pipes. Hydraulic supporters facilitate the rig erection on site without crane. Smaller size makes it adaptable to various kinds of construction sites. Rated Drilling Depth 300m Borehole Diameter 105-350mm Engine Power 92kW Maximum Lifting Force 15T Small Winch Lifting Force 1.5T Rotation Torque 8500N.m Rotation Rate 0-40/80rpm Feeding Stroke 3600mm Lifting Speed 0-18m/min Grade Ability 15° Hydraulic Generator (optional) 24kW/380V Flow of Foam Pump (optional) 20L/min Dimension (L x W x H) 6300mm x 2000mm x 2300mm Working Size (W x H) 3100mm x 6900mm Weight 8.5T
