The equipment has high magnetic induction intensity to attract the ore with size up to 350mm, and can be applied with various model belts according to the customersí» demands.It is mainly used at the preseparation
Stage to rejecting excess gangues.
Maximise recovery of ferrous metals
High performance magnet design to suit your application (ferrite, rare earth) to provide the most effective and efficient method of metal recovery.
Minimise maintenance
Wear resistant non-magnetic drum skin. Permanent magnet drums are built using high intensity non-deteriorating material, so not only is no power required to the magnet, but it will also provide maximum magnetic force for the lifetime of the machine. High permeability magnetic circuit to minimise stray magnetic fields, prolonging their life.
Optimise throughput
Deep field magnet systems penetrate through the product burden and remove the maximum amount of ferrous metal. This allows for a higher throughput of material to be separated efficiently.
Weight nw: 34, 450 kg
Max. Load: 14, 000 kg
Front bridge load: 16, 600 kg no-load
Rear bridge load: 17, 850 kg no-load
Front bridge load: 38, 500 kg full load
Rear bridge load: 9950 kg full load
Operation ability
Maxi. Speed
Full load, advance / retreat, flat road
Gear 1: 4.1 km / h
Gear 2: 7.5 km / h
Gear 3: 14.3 km / h
Gear 4: 26.5 km / h
Max. Slope (load): 25%
Max. Traction: 330 kn
Hydraulic system
Designed to use imported hydraulic valve, eg. Bosch, rexroth, fk506 suodanbishimo, kewobaike
Driving system
Torque converter
Manufacturer: dana, the united states
Model: series8000
Design: single-industrial-type hydraulic auxiliary drive system
Gear-box
Manufacturer: danad, the united states
Model: series5000
Design: power shift 4 forward stalls after 4 tuidang
Drive bridge
Manufacturer: dana, the united states
Model: 21 d4354
Design: self-locking rigid bridge with no-spin slide-proof differential speed.
Weight nw, 10000 kg
Max. Volume: (sae, stowing), 5.5m3
Maximum load: 10, 000 kg
Operation ability
Max. Speed
Full load, forward / backward, flat road
Gear 1: 0-3.5 km / h
Gear 2: 0-7.0 km / h
Gear 3: 0-13.0 km / h
Gear 4: 0-23.0 km / h
Max. Slope (full load): 3.3 km / h 25%
The greatest traction: 197 kn
Brake
Braking system: dual pipeline hydraulic brake system
Wet completely closed multi-disk brake
Work brake:
Design: multiple disk external liquid cooling hydraulic operation
Parking brake design: spring brake hydraulic release
Brake pressure: 130-150 bar
Driving system
Torque converter
Manufacturer: dana, the united states
Model: c273
Design: single-industrial-type auxiliary drive hydraulic system
Gearbox
Manufacturer: dai satisfied that the united states (dana)
Model: r28000
Design: power gear-shift, 4 forward gears and 4 backward gears
Drive bridge: meichi, xuzhou
Model: soma c103
Hydrolic system
Designed to use imported hydraulic valves, eg. Bosch\ rexroth\ fk506\ suodan\ bishimokewobaike
Weight nw, 255000 kg
Max. Volume: (sae, stowing), 15 m3
Max. Load: 25, 000 kg
Front bridge load: 14, 950 kg no-load
Rear bridge load: 8050 kg no-load
Operation ability
Max. Speed
Load, advance / retreat, flat road
Gear 1: 5.0 km / h
Gear 2: 11.0 km / h
Gear 3: 19.0 km / h
Gear 4: 26.0 km / h
Max. Slope (load): 3.3 km / h 25%
Max. Traction: 231 kn
Brake
Braking system: hydraulic brake system
Brake work:
Design: multiple disk external liquid cooling hydraulic operation
Parking brake / emergency brake
Design: spring brake hydraulic release
Brake pressure: 130-150 bar
Driving system
Torque converter
Manufacturer: dana, the united states
Model: c5472
Design: single-industrial-type auxiliary drive hydraulic system
Gear-box
Manufacturer: dana, the united states
Model: r36420
Design: power gear-shift, 4 forward gears and 4 backward gears
Drive bridge:
Manufacturer: dana, the united states
Model: 19 d2748
Designno-spin slide proof self-locking differential speed for front bridge
25337 Construction Equipment Machinery Suppliers
Short on time? Let Construction Equipment Machinery sellers contact you.
Equipped with sand making machine, XSD series sand washing machine with wheel-like structure is necessary in sand making. Adopting advanced technology and taking practical condition of crushing industry into consideration, XSD sand washing machines are applied for washing, grading and dehydrating in construction site, sand making factory, hydroelectric station dam, glass manufacturing, and oil well development.
Model XSD2610 XSD3016
Spec. of Impeller(mm) ª¦2600í-1000 ª¦3000í-1600
Impeller Speed(r/min) 1.178 1.179
Capacity(t/h) 20-50 50-120
Input Size(mm) í_10 í_10
Weight(t) 2.68 3.26
Motor Power(kw) 5.5 15
Decelerator Model ZQ50-50-T-Z ZQ65-50-T-Z
Overall Dimension(mm); (LxWxH) 3255x1982x2690 3845x3000x3080 .
Ball mill is an important grinding mill for grinding after materials are crushed and also an efficient tool for grinding various materials into fine powder.There are two ways of grinding: the dry process and the wet process. Ball mill can be divided into tabular type and flowing type according to different forms of discharging material.
Weight nw: 25, 300 kg
Max. Load: 9500 kg
Front bridge load: 11, 800 kg no-load
Rear bridge load: 13, 500 kg no-load
Front bridge load: 26, 595 kg full load
Rear bridge load: 8205 kg full load
Operation ability
Max. Speed
Full load, advance / retreat, flat road
Gear 1: 4.0 km / h
Gear 2: 8.3 km / h
Gear 3: 15.4 km / h
Gear 4: 25.0 km / h
Max. Slope (load): 25%
Max. Traction: 227 kn
Brake
Braking system: work / hydraulic parking brake system integration
With the lifting handle
Brake work:
Design: multiple disk external liquid cooling hydraulic operation
Brake pressure: 110-150 bar
Parking brake / emergency brake
Design: spring brake hydraulic brake released four security
Driving system
Torque converter
Manufacturer: dana, the united states
Model: series8000
Design: single-industrial-type hydraulic auxiliary drive system
Gear-box
Manufacturer: dana, the united states
Model: series32000
Design: power gear-shift, 4 forward gears and 4 backward gears
Drive bridge
Front bridge
Model: d102
Manufacturer: germany kessler (kessler)
Rear bridge
Manufacturer: kessler, germany
Model: d102
Design: with ordinary differential speed
Weight nw: 12500 kg
Max. Load: 4000 kg
Front bridge load: 5625 kg no-load
Rear bridge load: 6875 kg no-load
Operation ability
Max. Speed
Full load, forward / backward, flat road
Gear 1: 3.6 km / h
Gear 2: 7.6 km / h
Gear 3: 12.5 km / h
Gear 4: 20 km / h
Max. Slope (full load): 14%
Max. Traction: 104 kn
Brake
Design: multiple disk external liquid cooling hydraulic operation
Brake pressure: 110-138 bar
Parking brake / emergency brake
Design: spring brake hydraulic release
Hydraulic system
Designed to use imported hydraulic valve, eg. Bosch, rexroth, fk506, suodan, bishimokewobaike
Driving system
Torque converter
Manufacturer: dana, the united states
Model: c272
Design: single-industrial-type auxiliary drive hydraulic system
Gear-box
Manufacturer: dana, the united states
Model: r28421
Design: power gear-shift 4 forward gears and 4 backward gears
Drive bridge: meichi, xuzhou
Model: q150
Design: no-spin slide proof self-locking differential speed for front bridge, ordinary differential speed for rear bridge
Raymond mill is suitable for grinding the nonflammable and nonexplosive materials with humidity below 6 % and mohs hardness less than 7, such as barite, calcite, feldspar, limestone, marole, glass and so on.Model:3r2615 max.Charge granularity(mm):20 discharge granularity(mm):0.125-0.044 shift output(t):2-25 central shaft velocity(r/min):165 inner diameter of the ring(mm):780 diameter of the roller(mm):260 motor of main machine(kw):y225s-8-18.5
It is developed by our engineers through many years' hard work on the basis of rich experience of industrial mills.It is mainly used in super powder processing with more than 500 kinds of materials such as feldpar,talcum,barite,marble,limestone.charcoal blacks and china clay,with output fineness of 500 meshes(25um) to 2500 meshes(5um) and the finest powder can be 3500 meshes(3.55um).Model:7826 No.of Roller(piece):3 Diameter of Roller(mm):260 Inside Dia of Ring(mm):780 Speed of Main Frame(r/min):160 Max.Feed Size(mm):20 Capacity(t/h):25-500 Motor Model of Main Frame and Power(kw):Y225S-8-18.5 Total Power(kw):45 Diamension L*W*H:4.1*4.2*5.1 Weight(t):4.8 Output Size(mm):500 mesh(0.25)-1250 mesh(0.01),the finest 2500 mesh(0.005)
Ball mill is the main part of grinding system, which is essential in the cement production. Our company is qualified to supply kinds of large ball mills for production line. All kinds of central drive, side drive, central discharge, slide-shoe bearing mill that can help you to produce qualified cement are in our range. The ball mill can be widely used in cement production, metallurgical, chemical industry and etc.
This equipment uses biserial and centripetal spherical rod mandrel which can automatically adjust. The operation resistance of the equipment is extremely small, so its energy-saving effect is Significant. A section of Cone Cylinder is added to the original cylinder, which not only enlarges the effective volume the mill, but also makes the media inside the cylinder distribute more reasonably. It is widely used for grinding materials in the mineral dressing plant of non-ferrous metals and ferrous metals, as well as the Chemical and building materials lines.
The machine is mainly applied to the powder processing of mineral products in the industries of metallurgy, construction materials, chemical, and mining, etc. it can produce powder from various non-flammable and non-explosive mineral materials with Mohs hardness below 9.3 and humidity below 6%, such as quartz, feldspar, calcite, talcum, barite, fluoride, Xircom, cinder, white lime, cement clinker, activated carbon, dolomite, granite, soft coal, coking coal, lignite, magnesia, chromium oxide green, gold ore, red clay, clay, kaolin, coke, coal Gangue, porcelain clay, kyanite, fluorspar, bentonite, medicinal stone liparite, diabase, pyrophyllite, shale red stone, emeraldite, basalt, gypsum, graphite, carborundun, heat insulating material, etc.
Hammer Crusher is widely used in mining, cement, coal, metallurgic, construction material, road building, and Petroleum & Chemical industries. It is used for grinding the medium-hard materials. The material will be grinded by the striking between high-speed hammer and material. It possesses qualities of simple structure, large reduction ratio, and high-efficiency. Both Dry and Wet Process are available.
Hammer Crusher Operating principle:
The main working part of hammer crusher is rotors with hammer. The rotors consist of main shaft, disk, pin shaft and hammers. The motor drives the rotors to rotate quickly in the crushing cavity. Raw materials enter the crusher through the feed opening and are stricken, impacted, cut and ground by the high-speed hammer to small size. There is a screening plate under the rotor, so that materials with size smaller than the screen mesh will be screened out and others are left to be further hammered and ground until reach the standard size. The size of the final product can be adjusted by changing the screening plate. The gap between the rotors and the screening plate can also be adjusted according to different requirement.
Spirals are gravity concentrators and separate minerals of different specific gravity according to their relative movement in response to gravity, centrifugal force and other forces in the fluid medium. It has extremely good performance and effects in processing placer of beach, riverside, seashore and stream.
í¦Gandongí¦ Spirals are made of polyurethane lined fiber glass with wearable corundum inner surface.
Generally there are 5 turns in one start, single, twin, triple and quad starts available per column to suit capacity requirements.
Application
Rutile, ilmenite and zircon concentration
Iron ore, chromite and manganese beneficiation
Tin, tantalum and ore concentration
Gold, native copper and base metal recovery
Silica sands processing
Titano-magnetite concentration
Feature & Benefits
Reasonable structure and small occupation area
High recovery, high efficiency, and precise separation,
Light in weight, rust and corrosion resistant;
Simple installation and Minimal maintenance requirements
Low operating cost and long operating life
Reliable running with minimal operator attention
Strong adaptability to fluctuation of feeding amount, density, size and grade.
Jigging machine belongs to gravity-based equipments, which can separate mineral based on differing of specific gravity. Gandong saw-tooth wave jig is mainly consist of three parts: main frame, driving set and jigging chamber.
Application
Jigging machine is widely used in gravity concentration of tin, tungsten, placer gold, hematite ore, manganese, titanium, antimony, lead, tantalum, niobium and other minerals.
Features
The pulsing curve of the traditional jig is sinusoidal waveform, the up and down speed of water flow and acting time produced by the movement of membrane are almost same, so it is unfavorable to loose of jig bed and layering of minerals based on special gravity, and thus affect separation ability and recovery rate. Saw-tooth wave is energy economy gravity equipment that is developed and improved from traditional jig on the basis theory of jig bed layering. Its jigging pulsating curve is similar to saw-tooth wave, which makes the up speed of water flow quicker than down speed of water flow, so it can improve looseness of jig bed and reduce suction action, which can lead to fully settlement of heavy particles in slurry, it highly improves separation ability and recovery rate. Stroke and frequency of stroke are adjustable.
25337 Construction Equipment Machinery Suppliers
Short on time? Let Construction Equipment Machinery sellers contact you.
