Calcium Silicate compound is obtained by reaction of Silica & Calcium oxide. This compound is commonly used to insulate high temperature Pipe, equipment & for fire endurance application.
Calcium Silicate have high compressive strength, resistance to damage from tumbling, ability to maintain its properties without loss of insulating efficiency, are rigid, reusable, light in weight and have long life.
Refractory Burner Blocks are special type of Block which are form of Refractory ceramic material. It is used for Boiler, furnace, kiln, fireplaces & fireboxes.
Quality:
We offer various quality Burner Block are IS-6, IS-8, PI - 30% to 70% Alumina offering high temperature resistance of 1100 C to 1700 C & Special brick as per require technical data considering to application of Brick.
Sizes of Burner Block (Inch):
9 x 9 x 9
12 x 12 x 12
14 x 14 x 14
16 x 16 x 16
MEMFILL's Hollow Fiber Membrane Technology puts into use for providing safe-drinking water for better today.
MEMFILL offers 3 different products in this category:
1. Classic UF filter (20 LPH) for Residential Use
2. UFinRO UF Filter (40 LPH) for small Commercial Use
3. Jumbo UF Filter (500 - 800 LPH) for big Commercial Use
--------------------------------------------------------------------------------------------------------------------------------------------
Salient Features
- Durable Indigenous Hollow Fibers
- High Flux up to 1000 lph
- Filters Suspended Solids, Virus & E-coli
- Customizable Design
- Easy to Install & Replace
- Easy to do Backwash
- Very Low Maintenance
Product specifications/features
We have eps block scraps, they are all white colors and compacted in
Blocks.We offer good quality eps block scrap. Please contact us for more
Details.Compressed to 44k lbs per 40' container.
Standard density ranges per cubic foot
The term "cover block" can have different meanings depending on the context in which it is used. In various fields, a "cover block" refers to different things.
Construction and Civil Engineering: In the construction industry, a cover block is a small piece of material, often made of concrete, that is used to maintain a specified distance between the reinforcing steel bars (rebar) and the outer surface of a concrete structure. This distance, known as the "cover," is crucial for the durability and strength of the structure. Cover blocks are placed on the rebar before concrete is poured to ensure the correct spacing and to protect the rebar from corrosion.
SPECIFICATION:
Shape Square
Color Grey
Size Available in various sizes and for multiple shapes
Design Hollow
Keep the details as in the products details.
Fusion AAC Blocks (Autoclaved Aerated Concrete) is a certified green building material. These blocks are light weight, load-bearing, high-insulating, durable building product produced in a wide range of sizes and strengths. The raw materials used to manufacture these blocks are cement, fly ash, gypsum, lime and water. Fusion AAC blocks manufacturing involves hardening through steam-curing in autoclaves creating calcium silicates, making them stronger.
These blocks are manufactured in a variety of sizes. These precast concrete blocks are widely used for internal and external wall construction. Fusion blocks are easy to install, nail, drill and cut for pipes and conduits. Most of the volume of an Fusion AAC block is air making them light weight thermally insulative/fire resistant with good acoustic properties.
Fusion Jointing Mortar is an AAC Blocks Jointing adhesive that gives excellent bonding between two blocks. It is also suitable for the bonding of many other construction materials such as tiles, hollow bricks and other kinds of fly ash bricks in the interior or exterior applications. The mortar is specially designed to provide higher bonding resulting in higher tensile adhesion strength.
Properties
Base : Cement modified with polymer additives
Density: 2.0 g/cm3
Water Demand: 20 �¢?? 21%
Tensile adhesion Strength: 1.0 N/mm
Self-Curing: Yes
Color : Grey
Package : 40 kg per bag
Area of Application
Fusion Jointing mortar construction easier and faster.
It can be used jointing all AAC blocks, Hallow bricks, and Cement bricks.
Parapet walls and jointing of cement windows and doors.
Jointing of panels and pre-stressed concrete slabs.
Boundaries and garden walls.
VFLOOR2 are two component waterproof Self Leveling Mortar. Once cured, it provides a smooth, level surface on which to install a variety of floor coverings. Suitable for prepairing interior floors prior to laying parquet, vinyl sheet and tile, soft floor covering, natural stone, ceramic tiles, etcâ?¦
It can be used on a wide range of absorbent and non-absorbent floor surfaces including concrete, cement and sand screeds, terrazzo, asphalt, ceramic & quarry tiles.
Layer-thickness 2-10mm
Can be pumped
Product name: Self leveling concrete without primer VFLOOR2
Compressive strength: >35 Mpa, 28 days later
Flexural strength: >7 Mpa, 28 days later
Application
Temperature: 5-30 degree
Mixing ratio: 20kgs powder + 5kgs Liquid
Feature & Benefits:
- Two component, just mix A+B
- Waterproofing
- Good adhesion to primed substrates
- Good flow, self smoothing
- Rapid setting and early strength
- Easy and quick to lay
Mixing:
Convenient easy mix ratio A:B = 4:1 by mass. Mix slowly and continuously to form a homogeneous mixture.
The mixed materials is immediately ready to use and should be used within 30-40 minutes after mixing.
Ready for foot traffic after approx. 24 hours.
Drying time:
Prevent draughts across the floor to avoid localized premature drying
At ambient temperature, VFLOOR2 will appear to be dry after approximately 24 hours, ready for foot traffic after approx. 24 hours.
Floor laying may commence after 48 hours.
Coverage:
At an application thickness of 2mm the coverage will be approx. 5kgs per 1m2
Shelf Life: 9 months.
We are manufacturer autoclaved aerated concrete (AAC BLOCK) products in Turkey. We export to European countries, Arabic countries ,Africa countries .
We are ready to cooparate with your company . Our factory capacity 1500 m3 /day .
You can see our products specifications in attechment file technical Report.
AUTOCLAVED AERATED CONCRETE ;
AAC INSULATED BLOCKS:
A4-300 60*25*30 CM
A4-300 60*25*25 CM
A4-300 60*25*20 CM
A4-300 60*25*15 CM
A4-300 60*25*10 CM
A4-300 60*25*8 CM
A4-300 60*25*7CM
A4-300 60*25*6 CM
A4-300 60*25*5 CM
AAC BLOCKS:
G2-400 60*25*30 CM
G2-400 60*25*25CM
G2-400 60*25*20 CM
G2-400 60*25*15 CM
G2-400 60*25*10 CM
G2-400 60*50*10 CM
G2-400 60*50*9 CM
AAC BLOCKS:
G3-500 60*25*30 CM
G3-500 60*25*25 CM
G3-500 60*25*20 CM
G3-500 60*25*15 CM
G3-500 60*25*10 CM
NOTE: if you want any other size we can manufacture it. Please contact with us.
PANELS;
Length : 600 cm max
High : 62.50 cm max
Thickness: 12.50 cm â?? 30 cm between
Dry unit volume weight G3-500 : 500 Kg /M3
Dry unit volume weight G4 600 : 600 Kg /M3
Rough Black granite blocks having fine small close grains texture formation throughout the surface of the block.
The close grains granite blocks, once polished, looks very appealing to see.
Fused cast AZS major include model AZS-33; AZS-36; AZS-41. the different model applicated in different parts of furnaces.
AZS block 33#,a normal refractory material, with the features of very good melting glass resisting, Which seldom produces stone or other faults, and has little possibility to produce bubbles. And it is widely used in glass Indaustrial furnace.
AZS block 36#:has more free baddeleyite crystals in chain structure and less vitreous phase, which further improve the corrosion resistibility and reduce the potential defects in glass, so it is recommended to be used in sections where glass flow is faster and temperature is higher, such as melter sidewall, paving, doghouse, etc.
AZS block 41#:has the most free baddeleyite crystals among the fused cast AZS families, which are evenly distgributed within the block. Its corrosion resistibility is the best and thus it is usually recommended to be used in the most demanding positions to balance the furnace life.
we are supplier of natural stones in Iran and turkey, our products are granite,marble,onyx and travertine in all block and slab formats suitable with buyer's needs
The spacer blocks for reinforcement machine manufacturer introduced the breakdown maintenance of the crusher
The crusher is one of the commonly used machines in mining. According to the industry, it is generally divided into medical crusher and mining crusher.
The mining crusher is mainly used to break bulk ore.
It is a very important machine in mining.
Due to the harsh working environment of the crusher, it is easy to cause the breakdown of the crushing machine.
