Features Specifications: Membrane Switches with Embedded LED's A membrane switch with embedded LED's is generally described as a thin, low profile, micro-motion front panel keypad, utilizing one or more layers of polyester. Screen printed conductors are printed on each layer, and pressure-sensitive adhesives are used to bond the polyester layers together. The assembly may also include passive electronic components, such as resistors or capacitors that are adhered to the membrane switch substrate using conductive adhesive technology. Other options that are often provided on the front panel include an adhesive mounting sheet to attach the keypad to a housing or sheet metal bracket, and a graphic overlay - which provides the cosmetic appeal that is most often associated with a touchpad assembly. The display panel would include either tactile or non-tactile switches as part of the front panel. Thus, a bonded assembly can also be described as a non-tactile, or tactile, membrane switch assembly.
Barcode card Detailed product description 1. Material: pvc , paper , pet , plastic 2. Size: 86 x 54mm, thickness: 0.3mm / 0.5mm / 0.76mm, customer's requirements are available 3. Crafts: 4 color offset printing 4. Available crafts: serial number, barcode, scratch panel, photo, embossment, hot-stamping, signature panel 5. Applications: scratch card, magnetic card, barcode card, vip card, membership Card, id card, calendar card 6. Used in banking , telecommunications , taxation, security, postal , securities, education, sports , insurance, supermarkets, hotels , tourism, enterprises and institutions , and other fields
Scratch card Detailed product description 1)material: high quality pvc or paper; 2) size: 85.6 x 54mm or follow client's requirement; 3) thickness: pvc will be 0.30mm, 0.50mm, 0.60mm, 0.76mm, paper will be 300g, 350g, 400g, 500g, etc. 4) crafts: 4 color offset printing; 5) available crafts: magnetic stripe, photo, embossment, hot-stamping, signature panel, barcode, serial number, water-mark, etc. 6) application: game card, id card, vip card, insurance card, contactless card, phone card, ic card, membership card, chip card, abnormity card, etc. 7) professional design based on your requests 8) various shapes and sizes available Contact us with your oem/odm inquirie
Pvc card Detailed product description 1. Material: pvc , paper , pet , plastic 2. Size: 86 x 54mm, thickness: 0.3mm / 0.5mm / 0.76mm, customer's requirements are available 3. Crafts: 4 color offset printing 4. Magnetic stripe: a. Lo-co magnetic stripe: 300oe ;b .Hi-co magnetic stripe: 2750oe 5. Available crafts: serial number, barcode, scratch panel, photo, embossment, hot-stamping, signature panel 6. Applications: scratch card, magnetic card, barcode card, vip card, membership Card, id card, calendar card 7. Used in banking , telecommunications , taxation, security, postal , securities, education, sports , insurance, supermarkets, hotels , tourism, enterprises and institutions , and other fields
Smart card Specifications: 1) chips module: sle5542, sle4428, mf1 s50, mf1 s70, etc... 2) size: 85.5mm x 54mm, 3) thickness, weight, size: standard 4) color: can be four colors in two sides 5) available crafts: A. Magnetic stripes (300 oe, 2750 oe) B. Offset or silk printing (metallic printing) C.Scratch panel D.Serial number printing E.Hole punching F.Barcode G.Logo printing, embossing, numbering 6)make artworks by your requirements. 7)welcome oem inquiries.
CD-R A or b grade discs, licensed or non-licensed, branded or unbranded depends on requirements
P4 Notebook Miga provides various kinds of low cost notebooks, including famous brands, miga brand
Contact: amily[at]veecom dot com dot cn GPRS200 MODEM as a standard RS232c interface, result in widely extending the applicable fields of GPRS. It can be applied in the desk computer, notebook computer and other control system terminal. It has a highly frequency stability. PRODUCT FEATURES: Always on-lined and high-speed connection. Easily installation: Neednf+t any driving program. It can be dialed-up using RS 232 interface with common modem. DualBand GSM/GPRS modem (EGSM900/1800MHZ,900/1900MHZ) designed for gprs Networkf=Data faxf= SMS and voice application. Transmitting speed: 115.2K BPS (theoretical), 30f¼50K BPS (under the CHINA Mobile network) Channel spaces: 200Kpbs Stability of frequency: 0.1ppm Operating temperature:-20ºC--+60ºC Storage temperature: -30ºC--+85ºC Humidity: 98% Vibration(non working): 25g. Operating power: 15mA INTERFACES RS-232C and audio through mini sub-D 9-pin connector supporting: Remote control by AT commands(GSM07.07 And 07.05) Audio use a stereo earphone connecter antenna interface 50 ohm MMCX connecter LED indecter SMA Sliding SIM holder(3V/5V SIM interface) Antenna vonnector 6V-15V DC POWER SUPORT OPERATION SYSTEM DOS,WINDWS 9X,ME,NT,2000,XPf=LINUXf=UNIXf=POCKET PCf=MAC APPLICATION: Remote controller, Integrating system. DIMENSIONS: 100x54x25mm WEIGHT: 200g.
Overview: contact: amily[at]veecom dot com dot cn FME-2 provides two interfaces of E1(g.703) or V.35, and the rate to every transmitting channel of E1 or V.35 can be up to 2Mbps. It was made by ASIC circuitry technology, we can also call it " PDH" Feaures: FME-2 is high-speed fiber optic modem with two E1/V.35 interface optional. The two interfaces of FME-2 can be V.35 or E1 (G.703), and also one can be V.35, another is E1 (g.703). The data transmitting rate is from N*64K (N=1-31) to 2048 Kbps. The clock is optional internal, external and slave. To achieve point to point testing, FME-2 can process the diagnosis of some troubles though the switch AL, DL and RL. There are many indicators LEDs on the panel to display work state, such as PWR, RXD,TXD, SYNC, TEST... E1 (G.703) interface comply with ITU-T G.823, G.703 and G.742, it can be impedance balance120ohm (RJ45) or unbalance 75ohm (BNC) The requirements to the fiber can be single mode/multi mode, single core/double core, SC/FC/ST, 2km/20km/40km/60km Power supply: AC 220V or DC -48V. DIMENSIONS: 240mm*215mm*50mm (L*w*H)
Contact: amily[at]veecom dot com dot cn GVE-Tplus is an upgrade of GVE-T. It is based on the ASIC circuitry design technology. It is a multi-functional, multi-purpose E1/G.703 to V.35 and LAN three-in-one multiplexer, which is also knowns as the three-in-one interface converter. GVE-Tplus can not only be set up into GVE-T, but also can distribute the whole E1 capacity to V.35 data interface, although E1 must be framed N*64Kbps(N=1--31). The work mode can be either internal clock and slave-clock, or N*64Kbps(N=1--31) external clock to achieve end-linking line. GVE-Tplus can be set up into long-range Ethernet bridge from V.35 to LAN interface. With low cost, it is suitable for use in bridge connection which is sensitive to cost or use in LAN as a stretcher or subsection. It can learn automatically MAC address in the connected LAN and only transmit the aim address to frame in another LAN. There are more than 10000 addresses in its LAN table. And they can be updated automatically. The highest speed of filtrating and transmission is 30000 frame/second(line speed). The buffer size is 64M. The throughput delay is 1 frame. When it is used as a stretcher or subsection, it can forbid filtration so that all traffic can be broadcasted in WAN. 10baseT interface can run in full duplex Ethernet with topology and improve data throughput by eliminating filled blanks in the 64 bytes frames. Without any negotiation in V.35 port, it is specially suitable for use in satellites and other wireless broadcast. 245mm*215mm*50mm
10/100 MBPS managed media converter Managed Media Converter is a 10/100Base-TX auto negotiation and auto MDI/MDIX cable selection Fast Ethernet Media Converter with intelligent network management that translates transmission signals from a twisted-pair 10Base-T or 100Base-TX cable to 100Base-FX fiber optic cable. It enables network managers and network operators quickly isolate problems without visiting multiple wiring closets, avoiding expensive downtime. With its SNMP manager, user can monitor and configure the Copper Port and Optical Port of center chassis and remote standalone easily. Besides, user can control the bandwidth rate limiting as N*32Kbps. Hardware Function Support 10Base-T, 100Base-TX, 100Base-FX Fully compatible with IEEE802.3, IEEE802.3u, IEEE802.3x standards Up to 5km distance on multi mode optical port and 120km distance on single mode optical port High-performance auto-negotiation chips make sure the data transfer with higher Security, stability and without block. Up to 1916 bytes package forwarded Support half/full duplex mode Auto-negotiate Low power consumption, low heat generation and excellent compatibility 10Watt professional communication power supply module inside the standalone. Chassis supports double redundant power supply modules and each power supply module Supports up to 100 Watt power output for the security and stability Support hot-swap for all the modules, but not including management module Single-strand/dual-strand optical module selectable, FC/SC/ST optical port slectable and standalone/16-slot chassis selectable. Device Size Standalone: 132mm (width)*36mm (depth)*122mm (height) 19-inch Chassis: 440mm (width)*125mm(depth)*250mm(height)
Hard disk drive
Smart cards 1kb contact less smart cards, 4 kb contactless smart cards, desfire cards, smart tokens, inlays, pvc cards, atm cards As per customers requirement
fashionable USB HUB lenses verison í¬í¬ function í¬í¬ 1) This product has four USB extension port connector. There are version 1.1 and 2.0 available 2)USB HUB connected to the input line into a computer USB port, 4 blue light lit up; 3)can be inserted any disk, mp3, SD, and other USB digital devices 4) materialú¦ABS 5) Product Patent No.:200830050301.0
Fashionable usb hub logo verison 1) this product has four usb extension port connector. There are version 1.1 and 2.0 available 2)usb hub connected to the input line into a computer usb port, light up your logo; 3)can be inserted any disk, mp3, sd, and other usb digital devices 4) materialú¦abs 5) product patent no.:200830050301.0 Color:black Unit meas72íß72íß18mm Unit weight72.4g Pcs/ctn100 G.W8.9kg N.W8.4kg Ctn meas57.5íß23íß16.7cm
Usb hub 1) this product has four usb extension port connector. There are version 1.1 and 2.0 available 2)usb hub connected to the input line into a computer usb port, 4 blue light lit up; 3)can be inserted any disk, mp3, sd, and other usb digital devices 4) materialú¦abs 5) product patent no.:200830050301.0 Color:black Unit meas727218mm Unit weight72.4g Pcs/ctn100 G.W8.9kg N.W8.4kg Ctn meas57.52316.7cm
Usb hub ai version 1) this product has four usb extension port connector. There are version 1.1 and 2.0 available 2)usb hub connected to the input line into a computer usb port, 4 blue light lit up; 3)can be inserted any disk, mp3, sd, and other usb digital devices 4) materialú¦abs 5) product patent no.:200830050301.0 Color:black Unit meas72íß72íß18mm Unit weight70.8g Pcs/ctn100 G.W8.7kg N.W8.2kg Ctn meas57.5íß23íß16.7cm
USB is born to terminate floppy. FUSB is born to update your equipment for USB no matter it is Japan, Korean or Chinese embroidery machine, or it is a normal computer, or it is an industrial computer or other textile machinery. Where thereí»s a normal floppy driver, FUSB will turn it into a USB port. 1. No alternation on main board or any program, it is a pure replacement for conventional floppy disk driver. 2. USB disk is portable, compact, lasting (for 100,000 times) and reliable (Stand against magnetism, moisture and vibration) 3. Simple, Fast and Easy, instantly plug and play, this FUSB brings you efficiency using USB disk than Floppy. 4. Same Size, same standard as connecting to a floppy driver, just plug FUSB in the same Port. Safe and Convenient. Just plug out the old Floppy drive, and plug in the new FUSB, then tighten the screw on the Floppy drive rack and flow the guide to start using it. Model FUSB Enhanced: Enhanced Version allows user to format USB disk into multiple floppy size that is multiple*1.44MB. Thus users may use multiple floppy disk from one USB Key . You may choose from the LED dispaly which number of disk to use in the USB key.
USB is born to terminate floppy. FUSB is born to update your equipment for USB no matter it is Japan, Korean or Chinese embroidery machine, or it is a normal computer, or it is an industrial computer or other textile machinery. Where thereí»s a normal floppy driver, FUSB will turn it into a USB port. 1. No alternation on main board or any program, it is a pure replacement for conventional floppy disk driver. 2. USB disk is portable, compact, lasting (for 100,000 times) and reliable (Stand against magnetism, moisture and vibration) 3. Simple, Fast and Easy, instantly plug and play, this FUSB brings you efficiency using USB disk than Floppy. 4. Same Size, same standard as connecting to a floppy driver, just plug FUSB in the same Port. Safe and Convenient. Just plug out the old Floppy drive, and plug in the new FUSB, then tighten the screw on the Floppy drive rack and flow the guide to start using it. MODEL FUSB Enhanced: Enhanced Version allows user to format USB disk into multiple floppy size that is multiple*1.44MB. Thus users may use multiple floppy disk from one USB Key . You may choose from the LED dispaly which number of disk to use in the USB key.
Capacities 32MB to 16GB Connector Pin 9 Pins Durability Waterproof: Yes Dust Proof: Yes ESD Proof: Yes Extreme Temp: Yes Electrical characteristics Supply voltage: 2.7V-3.6V Low Power Consumption (100,000 cycles (read/write and erase) Physical characteristics Protected Switch: yes Length:32mm Width: 24mm Thickness: 2.1mm Weight: 2g max Warranty 5 Years Warranty
