JMY501 series are RFID reader/writer module with UART and IIC serial ports. JMY501 has various functions and supports multi ISO/IEC standard of contactless card; the cards from different suppliers. The RF protocol is complex. But the designer combined some frequent used command of RF card and then user could operate the cards with full function by sending simple command to the module through IIC or UART interface. The impedance between RF module and antenna was tuned by impedance analyzer. And then the module has excellent performance and stability. The module and antenna is separate design. 4 wires are linked the antenna and module. Normally the wire should be less than 200mm, or it will affect the module's performance and stability. Qualifications: PCD: NXP RC500, RC531, RC632, RC400; FM1722 Working frequency: 13.56MHz RF standard: ISO14443A, ISO14443B, ISO15693 Operating distance: 100mm(depending on card and antenna design) Anti collision ability: Full function anti collision; be able to process multi-cards simultaneously; be able to set operate single card only Auto detecting card: Supported, default OFF EEPROM: 512Bytes Interface: IIC & UART (selected by SPS pin, recommend to use IIC) Communication rate: IIC--400Kbps, UART--19200bps/115200bps Max.command length: 511 Bytes Interface level: 3.3V (TTL level; 5V tolerance) Power supply: DC5V Power consumption: 70mA Dimension: 42mm¡Á21mm¡Á8mm Package: DIP32 Weight: about 15g Operating temperature: -77 ~ +185¡ãF Storage temperature: -104 ~ +257¡ãF ISP: Supported RoHS: Compliant 30 pcs per box, box size: 16cm*12cm*5cm.
JMY680 series are RFID reader/writer module with IIC or UART serial ports. JMY680 has various functions and supports multi ISO/IEC standard of contactless IC card; the cards from different suppliers. The designer combined some frequent used command of RF IC card and then user could operate the cards with full function by sending simple command to the module through IIC or UART interface. The module and antenna are integrated design. And the impedance between RF module and antenna was tuned by impedance analyzer. So the module has excellent performance and stability. Qualifications: PCD: NXP RC500, RC531, RC400, RC632 Working frequency: 13.56MHz RF standard: ISO14443A, ISO14443B, ISO15693 Operating distance: 80mm(depending on card and antenna design) Anti collision ability: Full function anti collision; be able to process multi-cards simultaneously; be able to set operate single card only Auto detecting card: Supported, default ON SAM card slot: 1 slot, 9600bps /38400bps EEPROM: 512 Bytes PPSS set: Supported Interface: IIC, UART, RS232C or USB to RS232C Bridge(select when place order) Communication rate: IIC--400Kbps; UART--19.2Kbps/115.2Kbps Max.command length: 511 Bytes Interface level: 3.3V (TTL level; 5V tolerance) Power supply: 5.0V Power consumption: 150mA Dimension: 70mm¡Á50mm¡Á16.5mm Weight: about 120g Operating temperature: -77 ~ +185¡ãF Storage temperature: -104 ~ +257¡ãF ISP: Supported RoHS: Compliant 10 pcs per box, box size 16*12*5cm.
Qualifications: PCD: NXP RC500, RC531, RC632, RC400; FM1722(followed shanghai encipherment standard, custom-made) Working frequency: 13.56MHz RF standard: ISO14443A, ISO14443B, ISO15693 Operating distance: 100mm (Mifare One, normal distance) SAM card slot: 2 slots, supported ISO7816 T=0, supported 9600bps & 38400bps Interface: RS232C or USB (build-in CP2102 USB to RS232 converter) Baud rate: 9600 ~ 115200 BPS Power supply: DC5V Power consumption: 180mA Dimension: 123mm¡Á88mm¡Á25mm Weight: about 150g Operating temperature: -77 ~ +185¡ãF Storage temperature: -104 ~ +257¡ãF 1pc/box, 16*12*5cm.
Qualifications: PCD: NXP RC500, RC531, RC632, RC400; FM1722 Working frequency: 13.56MHz RF standard: ISO14443A, ISO14443B, ISO15693 Operating distance: 80mm (Mifare One, normal distance) SAM card slot: 2 slots, Supported: ISO7816 T=0, Supported: 9600bps&38400bps Interface: RS232C or USB (build-in USB to UART converter) Baud rate: 9600 ~ 115200 bps Power supply: DC5V Power consumption: 180mA Dimension: 141mm¡Á100mm¡Á31mm Weight: about 100g Operating temperature: -77 ~ +185¡ãF Storage temperature: -104 ~ +257¡ãF. 1 pc/box, box size: 16*12*5cm.
MR800 series for reader/writer with the popular ARM7 microprocessors are of rapid & stable, reliable operation and beautiful appearance. User can choose freely if with the LCD display modul(128x64). They support boot screen & idle screen set and picture storage etc. The interface is USB PC/SC. They can be directly used the Windows operating system with driver and the API functions. The development cycle simple and short. The reader not only supports series IC cards according to ISO14443 TypeA/B, ISO15693 but also SAM cards compliant with ISO7816 (T=0 and T=1). Qualifications: PCD: NXP RC531, RC632; RC400, RC500(select) Working frequency: 13.56MHz RF standard: ISO14443A, ISO14443B, ISO15693 Operating distance: 100mm (Mifare One, normal distance) SAM card slot: 2 slots, (supports ISO7816 T=0 and T=1) Interface: USB PC/SC Power supply: USB DC5V Power consumption: 150mA LED: four LED (red, green, blue, yellow) Dimension: 123mm ¡Á 88mm ¡Á 25mm Weight: About 200g Operating temperature: -77 ~ +185¡ãF Storage temperature: -104 ~ +257¡ãF.
Isolates ADSL and voice bands. High quality product and services with double noise reduction and high progressive connection pick up. ADSL splitters/filters is an electronic device that isolates the adsl and voice bands. An adsl line filter is required whenever you connect a computer to the internet using broadband over a standard telephone line. The filters divide the signals on the telephone line between the high pitched computer modem sounds and the lower pitched human voices.
Native 1920 x 1080 Pixels,Real 1080P, Full HD Short Throw Projector. Bright at 2,000 lumens for dazzling images. Amazing 10,000:1 Dynamic Contrast Ratio for vivid picture quality. 3LCD Display Technology. Double HDMI Port,Support HDMI1.1~1.3. Standard fixed-focus wide-angle lens,100-inch dynamic image takes only 1.3 meters, small classrooms, small meeting rooms, small living room can also watch the big screen. Product Type 1080P, Full HD Short Throw Projector Optical Parameters Display Technology: 3LCD Panels x 0.74" Epson Policilicon Native resolution: Native Full HD /1920 x 1080 Pixels Maximum Resolution: Through HDMI Support To 3200 x 1200 Pixels Projector Brightness: 2,000 ANSI Lumens (Std) Dynamic ContrastRatio: 10,000:1(Full On/Full Off) Aspect Ratio: 16:9 Standard,4:3 compatible Displayable Colors: 16.8 million,24-bit RGB Light uniformity: 95% Projection Method: Front, Rear, Ceiling Mount, Table Top; Projection Image Image support horizontal and vertical flip Keystone Correction: ±20° Vertical, Digital keystone correction Optical Components Standard Fixed Lens: F=2.4 mm / f=10.4mm,Short Throw/Wide angle Throw Ratio: 82" at 1.0m; 100" at 1.3 m / 120" at 1.5m I/O(Input/Output) Computer : * 1 x VGA / Component Input Video: * 1 x YPbPr component video (3xRCA)* 1 x S-video (4-Pin mini DIN);* 1 x Video (AV/YPbPr/CbCr);* 2 x HDMI (HDMI 1.1~1.3) Aduio: * 1 x Audio In , 8W Mono x 1;* 1 x Audio Out Control: * 1 x RS232; 1 x Infrared Remote Control
Standard: ISO/IEC14443-A;ISO/IEC14443-B;ISO/IEC15693 Interface: USB/RS232, TCP/IP Baud Rate: 9600-115200bit/s Card Support: Mifare One S50; Mifare One Ultralight; MifareOneS70;MifarePro; I-code2; TI RFID Tag-it HF-I,EM4135,EM4034 Reading distance: 3-15cm Dimension: 100mm¡Á100mm¡Á27mm Power: USB or 5VDC, POE Current:
Protocol: ISO14443A/B & ISO7816 T=0,T=1 CPU Card; Port: RS232/USB Plug and Play Support card (contactless) mifare® Std 1k¡¢mifare® Std 4k¡¢mifare® UltraLight¡¢mifare® DESFire mifare® Pro ¡¢SHC 1102 Power supply: USB or 5VDC Current:
Protocol: ISO/IEC14443 Type A/B Support contact & contactless CPU card, Mifare one S50/ S70/ Ultralight, Mifare Pro Dimension: 95mm*95mm*22mm Read distance: 30 mm-100 mm Port: RS232/USB Plug and play Buzzer, LED indicator Power supply: USB / DC 5.0V Current:
Card support: ID thick card EM4100, H4100 Work Frequency: 125KHz Reading distance: 100cm 10% Interface:Wiegand26/34/42 RS232 RS485 Weight: 980g 2% Size: 262mm*262mm Voltage: 12V Power Consuming: Max: 200mA (12V) Static Protection: 4KV peak. Paper box.
IC smart card 1.PVC, PET 2. CR80 85.60 x 53.98mm 3.Compatible with SLE4442/4428 3.Complies with ISO7810-7816 standard . Proposal 1: As MingWah design Card packing details Box size: 22*9*5.5cm 200 pcs Carton 1 size: 47*23.5*18cm 15 Box in one Carton 3000 pcs in total Carton 2 size: 47*25*27cm 20 Box in one Carton 4000 pcs in total Carton 3 size: 47*25*32 cm 25 Box in one Carton 5000 pcs in total Proposal
Hp 500gb 6g sas 7.2k 2.5 inch, New and sealed with one year warranty
350964-B22 300 GB 10K RPM ultra320 hot plug SCSI driver, new and sealed with one year warranty.
HP 146GB 10k 6g 2.5 SAS DP HDD ENT New and sealed with one year warranty .
Hp 72gb 3gbps sas 15000 rpm, 2.5-inch (sff) , New and sealed with one year warranty.
Use in all the mobile TFT. Micro SD Card.
• Full card design service is available or we can accept your camera ready art. • Standard size is rectangular 2 1/8" x 3 3/8" with rounded corners.
Unlike contact cards,Contactless smart cards apply an embedded antenna that is attached to the chip to transfer information stored in the chip's memory to a remote computer. Contactless cards do not have to be inserted into a card acceptor device. They need only be delivered within range of a radio frequency acceptor to read and store information in the chip. The operation range is normally from about 2.5" to 3.9" (63.5mm to 99.06mm) .
Mifare Cards:¡¡ About MF 1 IC S50: - IC manufacturer: NXP( www.nxp.com), a subsidiary to Philips - Wafer die: MF 1 IC S50 - Function: Read/Write protect by password - Memory: 1K-Byte EEPROM(16 sectors) - Frequency: 13.56MHz - RF protocol: ISO 14443A - Modulation: ASK. Key Feature of Mifare 1K Card: - Dimensions: CR80 85.60 x 53.98mm - Thickness: 0.84mm - Material: PVC, PET - Card Surface: Matte/ gloss finish - Housing: Lamination - Working Frequency: 13.56MHz - Reading Distance: 6cm typically - Data storage time: 10 years.
