I m2 ex d i, ii 2gd ex d td a iib t3-t4t tmax. Surf. Ip 65 ex. Technical description: luminaire consists from body, basic plate and Flange with protective glass. Body and flange are castings from grey cast Iron treated with polyester powder paint. Luminaire can be suspended By the steel pendant with 2 eyes o 18 mm on the upper part of the Body. Connecting area (increased safety „d“), with connecting clamps and 2 cable glands, is placed on the side of luminaire. Flange cable glands No. 3-99.5747/1 from grey cast iron are designed for cable o 10 - 16 Mm (no. 3-99.6170/1 for o 16 – 20 mm optionally). Area is enclosed With cover from grey cast iron. Steel basic plate with electric parts And reflector is fixed in the body. Flange with glass cover is screwed In the body and secured with locking screw and silicon sealing Against unlocking, thread shapes a rift of flameproof enclosure „d“. Protective hardened glass resistant against mech. Shock min. 7 j is Fixed to the flange, the connection is filled with polyurethane putty. A steel hinge is fixed to the flange as the mobile one and enables to Hang the flange during mounting or dismounting. Steel parts are Galvanized and chromated. Luminaire is equipped with protective guard from steel wire. Max. Section of connecting conductors 4 mm2. Three-pole connecting terminal block enables interchanging 2 phases. Luminaire is equipped with 2 inner and 1 outer earthing clamps for conducting connection. Luminaire is designed as the through-way one for 4-core cable; when used as the end piece, there is necessary to use blinding plug (optionally on order). Packing carton is filled with polyurethane foam instapak. Luminous sources: Spc 300 and 500w, with ballast box hql 250w, 400w, nav-e 210, 350w Carton (mm/pcs) 560x300x30mm, weight 24 kg/pc
Technical description: luminaire consists from body, basic plate and flange With protective glass. Body and flange are castings from grey cast iron treated With polyester powder paint. Steel pendant with eye o 18 mm is fixed to the Upper part. Connecting area (increased safety „d“), with connecting clamps And 2 cable glands, is placed on the side of luminaire. Flange cable glands No. 3-99.5747/1 from grey cast iron are designed for cable o 10 - 16 mm (gland No. 3-99.6170/1 for cable o 16 - 20 mm). Area is enclosed with cover from Grey cast iron. Steel basic plate with electric parts and reflector is fixed in the Body. Flange with glass cover is screwed in the body and secured with locking Screw and silicon sealing against unlocking; thread shapes a rift of flameproof Enclosure „d“. Protective hardened glass is resistant against mech. Shock min. 7 j and is fixed in the flange, the connection is filled with a polyurethan putty. A steel hinge is fixed to the flange as the mobile one and enables to hang Up the flange during mounting or dismounting. Steel parts are galvanized And chromated. Luminaire is equipped with protective guard from galvanized Steel wire. Max. Section of connecting conductors 4 mm2. Three-pole connecting Terminal block enables interchanging 2 phases (4-core cable). Luminaire Is equipped with 2 inner and 1 outer earthing clamps for conductive connection. Luminaire is designed as the through-way one, when used as end piece, there is Necessary to use blinding plug (optionally on order). Packing carton is filled with Polyurethane foam instapak. Luminous sources: Hwl160 w e27, dulux d26 w g24d-3, bulb100w/220 e27, nav-e 110 w e27, hql125 w e27, nav-e 50/l 50 w e27, hql 80 w e27, clas 200 w e27, master pl e 23 w e27 and next Carton (mm/pcs) 430x240x240, weight 18 kg/pcs
2G Ex de IIC T4-T6 Gb II 2G Ex de IIC T4-T6 Gb II 2D Ex t IIIC T max.surf Db Luminaire consists of body, basic plate and flange with protective glass. Body and flange are made of AlSi alloy treated with polyester powder paint. Luminaire can be suspended by the help of steel pendant with eye o 18 mm. The connecting area (increased safety „e“) is placed on the side of the body and equipped with connecting clamps and 2 cable glands HSK-K-Ex M25x1.5 for cables o 9-16 mm. Area is enclosed with cover and sealed with silicon. There is aluminium basic plate with electro-module mounted inside the luminaire. Electro-module consists of 20 x LED CREE XP-G (luminous flux 4000 lm, lumen per watt 88 lm/W, colour temperature 3700-5000, Colour Rendering Index ~80, guaranteed life-time min. 50.000 hrs.) and cooling unit. Input of the luminaire is adjustable (45W/22,5W) by changing output current of the LED driver 700mA/350mA. Flange with protective glass is screwed in the body and locked with securing screw; thread shapes a rift of flameproof enclosure „d“. Protective hardened glass is resistant against mech. shock min. 7 J and is fixed in the flange; the connection is filled with polyurethane putty. The mobile steel hinge is fixed to the flange and enables to hang up the flange during mounting and dismounting. Steel parts are galva-nized and chromated. Max. section of connecting conductors 4 mm2. Three-pole connecting terminal block enables interchanging 2 phases (4-core cable). Luminaire is equipped with 2 inner and 1 outer earthing clamp for conductive connection. Luminaire is designed as through-way one, when used as the end piece there is necessary to substitute one cable gland with blinding screw V-Ex or to blind one unused cable gland with blinding plug HSK-V-Ex. The blinding parts can be delivered on order optionally. Versions K are equipped with protective guard from steel wire. Packing carton is filled with sealing polyurethane foam Instapak. luminous sources: EcoClasik 140W E27, CLAS 200W E27, DULUX D26 W G24d-3, Bulb100W/220 E27, NAV-E 110 W E27, HQL125 W E27, NAV-E 50/l 50 W E27, HQL 80 W E27, Master PL E 23 W E27 and next. Carton 410 cm x 240 cm x 240cm , Weight 10 kg/pc
Ii 2g ex de iic t6 gb Ii 2d ex t iiic t 60 °c db Luminaire consists of body, basic plate and Flange with protective glass. Body and flange are made of alsi alloy Treated with polyester powder paint. Luminaire can be suspended By the help of steel pendant with eye o 18 mm. The connecting area (increased safety „e“) is placed on the side of the body and equipped With connecting clamps and 2 cable glands hsk-k-ex m25x1.5 for cables O 9-16 mm. Area is enclosed with cover and sealed with silicon. There is Aluminium basic plate with electro-module mounted inside the Luminaire. Electro-module consists of 20 x led cree xp-g (luminous Flux 4000 lm, lumen per watt 88 lm/w, colour temperature 3700-5000, Colour rendering index ~80, guaranteed life-time min. 50.000 hrs.) and Cooling unit. Input of the luminaire is adjustable (45w/22, 5w) by changing Output current of the led driver 700ma/350ma. Flange with protective Glass is screwed in the body and locked with securing screw; thread Shapes a rift of flameproof enclosure „d“. Protective hardened glass is Resistant against mech. Shock min. 7 j and is fixed in the flange; the connection Is filled with polyurethane putty. The mobile steel hinge is fixed to The flange and enables to hang up the flange during mounting and dismounting. Steel parts are galva-nized and chromated. Max. Section of connecting conductors 4 mm2. Three-pole connecting terminal block enables interchanging 2 phases (4-core cable). Luminaire is equipped with 2 inner and 1 outer earthing clamp for conductive connection. Luminaire is designed as through-way one, when used as the end piece there is necessary to substitute one cable gland with blinding screw v-ex or to blind one unused cable gland with blinding plug hsk-v-ex. The blinding parts can be delivered on order optionally. Versions k are equipped with protective guard from steel wire. Packing carton is filled with sealing polyurethane foam instapak. Carton 410 cm x 240 cm x 240cm , Weight 10 kg/pc
The fls package includes a hydraulically separate lubrication and lubricating oil dehydration system, a hydraulic fluid supply and conditioning system and common control console in a single. The fluid system package can mount separately from the steam turbine-generator or be installed integrally with the turbine base. Full feature design Redundant ac motor driven pumps for both lubrication and hydraulic service Duplex lubricating oil filters and oil coolers Dc motor driven emergency oil pump Integral lubricating oil dehydration system Lubricating oil mist elimination system
Back pressure turbines can either be single stage or multi-stage which are often used in industrial plants, the turbine serves as a reducing station between boiler and the process steam header. These turbines can either be used for drive application (sugar mill drives, sugar fibrizor / shredder drive, pump drives and so on) or power generation application in which case the turbine drives the generator. These turbines are straight-back pressure type and find application where back pressure steam is fully utilized to meet process demands. The power generation is incidental to the process steam demand. The back pressure turbine may also have bleed points (uncontrolled extractions) to satisfy steam demands at intermediate pressures, this provision is applicable when the bleed (medium pressure) steam volume demand is low and pressure variations can be tolerated. These turbines are of bleed cum back pressure type.
The extraction condensing turbines are used when a constant pressure steam flow has to be extracted for process purposes. The constructional characteristics of these turbines are very similar to condensing turbines from the second admission valve chest it is possible to inject low pressure steam, available in the plant to supply the power required by the plant. These turbines are typically used for co-generation where the turbine meets both the power and steam demand of the process plant. In these type of turbines the power generated can be maintained more or less at a steady level despite
The condensing turbines take high pressure steam, expand it in turbine nozzles and blades, and exhaust it to a condenser at lower than atmospheric pressure. It is principally used when power must be generated with minimum steam consumption. The condensing turbine may also have bleed points (uncontrolled extractions) to satisfy steam e. These type of turbines find application mainly for power generation where bleed steam is required for feed water heating (hp heater, lp heater and deaerator requirement) and / or where bleed steam is utilized to meet small process demands.
Feed pump turbine drive packages are available from 100kw – 20mw. Complete steam turbine boiler feed pump packages are available, in addition to stand-alone steam turbine packages. 7 models, horizontal (axial and radial split), vertical , api 611- and 612-compliant, overhung and between-the-bearings wheel designs, metallic or carbon seals, electronic / hydraulic mechanical governors, customized steam path components, mechanical / electronic safety trip system, direct-drive or integral gear boxes with suitable lubrication systems.
Features 1.Intelligent and digital led(light-emitting ) timer 2.1~8 channels, programmable and arbitrary combination and arbitrary output 3.Memory storage (10years) / mechanical life 4.Panel mounting 5.Delay time unit:0.1s/1s/1min(option) 6.Power supply (220v ac 50/60hz) 7.Input:transistor 8.100 groups of programme/time periods
CpuMtk8389 a7 quad core 1.2g Display7'', resolution¡êo1024*768 ips Touch screenG+g 5points capacitance touch screen MemoryDdr3 1gb Storage8gb 3gSingle sim card dual standby¡ê¡§gsm 850/900/1800/1900mhz¡ê¬wcdma 850mhz/900mhz/1900mhz/2100mhz¡ê©, phone calling GpsYes, gps/agps/ygpa option Wifi802.11 b/g/n BtBt 4.0 Fm Wifi/bt/fmgps four in one chip I/o ports1*tf card slot (memory expand max.32gb) 1* 3.5mm earphone jack+mini hdmi (hdmi 1.4) 1*usb otg port support 3g, flash disk, mouse, keyboard, usb hub, power input Speaker1*speaker jack MicrophoneInternal microphone Audio formatsMp3¡¡éaac¡¡éaac+¡¡éeaac+¡¡éamr¡¡éwb-amr¡¡émidi¡¡éogg vorbis¡¡épcm decode Vedio formats"mepg 1/2/4, h.263/h.264, rmvb, wmv/vc-1, mvc, avs, mjpeg. (up to 1080p) " Picture formatesBmp, jpg, gif, png Word processing Pdf/txt/chm/doc/excel/epub/rtf/fb2 Ca Dimension:200*134.7*7.8 mm , 1.5kg weight.
Solar water pump, street light, lamp, mobile charger, road studs, home lights, cookers, and so many solar products.
Molding size 140mmx180mmx135mm Print speed 10~60mm/s Forming accuracy §¡§0.2160;mm/100160;mm Molding thickness 0.2~0.4160;mm Forming speed 5~70160;cm3/h;;¡ìo172; Depending on the print material Molding material Abs/pla/specialty materials Software Dogo160;printer Net weight 5.8kg Dimensions
1. P c mainboard, sdh, pdh, ip phone, xdsl modem 2. Application: support 10/100 base-t 3. Through hole type 4.Minimum 1500vrms Applications: Used for networking and communication equipments such as hub, pc card, switch, router, pc mainboard, sdh, pdh, ip phone, xdsl modem Tray
1.Standards ieee 802.11 b/g/n 2.Microusb port, usb port 3.Frequency range 2.4 - 2.485ghz 4.300mbps portable router G.W: 0.32kg; size of box: 140 *90*45mm; size of carton: 58*38*20cm Qty:40pcs/ctn
They have good mechanical properties and toughness, good heat resistance and moisture resistance, excellent wear resistance, and easy to machine. Cotton based grades have greater mechanical strength than paper based grades. For use in machine spare parts, gears, pinions, bearing retainers, scrapers, pneumatic tools, motors, conveyer machine, textile machinery, and other mechanical applications. Specification: 1) grade: c/ce/l/le 2) color: brown; black 3) thickness range: 0.5mm to 100mm 4) sheet size: 1020*1220mm; 1020*2040mm; 1220*2440mm 5) min. Order quantity: 500 kgs in a lot Packaging detail: 500-1000kgs per pallet or as required
Model: 9.7" led laptop screen Part number: lp097x02-slq1 Condition: original brand new Screen size: 9.7 inch Resolution: wxga hd (1024x768) pixels Aspect ratio: 4:3 Screen type: tft active matrix Backlight type: led Connector: 30 pin Warranty: 180 days Packing: antistatic bag and original box Lead time: within 3 days after payment confirmed Shipping: dhl, fedex, ups, ems, aramex, air cargo, hk post...... Packaging detail: antistatic bag or original box Delivery detail: within 3 days
Insulating rods & tubes(also known as: phenolic cotton cloth laminated rod, phenolic cotton cloth molded rod, epoxy glass cloth molded rod, epoxy glass cloth tube) Used in a variety of insulating applications. 1) grade: 3721 /3725 /g10/ g11/fr4/fr5 2) color: natural green(for epoxy rods/tubes); Brown (for phenolic rods/tubes) 3) length: 1000mm or customize 4) diameter: as customers¡¯ requirement. 5) minimum order: 500 kgs in a lot 6) packing: 500~1, 000kgs/pallet or as required We have the ability to machine electrical insulation laminates into many customize sizes and shapes according to drawings or samples. Packaging detail: 500-1000kgs per pallet or as required
We have the ability to machine electrical insulation laminates & metallic materials into many customize sizes and shapes according to drawings or samples. Machining capability include cnc milling, lathe turning/drilling/ routing, sanding, grinding, die cutting, and many others ... . Packaging detail: As buyer' requirement
Model: compatible ricoh toner cartridge 2320d This cartridge is suitable for use in the following machines: aficio 1020, 1022, 1027, 2027, 3025, 3030 copier Page yield: up to 11000 pages at 5% coverage.