Electrical conductors.
Propolis is not only useful for the bee, but also for human beings. Since ancient times, propolis has been used in the healing of wounds and the treatment of cavities and infections of the mouth and throat, due to its antiseptic and bactericidal activity. Nowadays, new technologies allow a better understanding of its composition and discovery of food industries for this product is centered on some of its activities, which have been proved after years of research. Among the most notable are the following LOCAL superior to novocaine. - And tissue restructuring agent. -Antioxidant Propolis is an excellent natural source of antioxidants, due to its high content radicals, which are responsible for cell aging. Favors phagocytosis and the formation of antibodies and indirectly increases the global resistance against all kinds of infections, galangin, pinocembrin, kaempferol, pinobanksin, which act in synergism with esters of caffeic acid and ferulic acid, and other minor components.
Electrical products.
Generation.
Our High-efficiency solar panels can produce 7.8KWh of daily output power under full sunshine, which can meet the daily basic electricity demand. Easy to use, suitable for off grid shop,garage,shed and remote agriculture. We offer from basic offline systems and systems that meet the demand required at a residential and industrial level. National delivery and international service, incoterms: EXW, FOB, CFR & CIF. Advanced encapsulation material with multi-layered sheet laminations enhance cell performance and provide a long service life;By-pass diodes are pre-installed in waterproof IP-65 rated juncton box to minimize power drop caused by shade and ensure excellent performance in low-light environment. The intelligent charger regulator is suitable for lead-acid, gel battery. Solar controller has short-circuit,open-circuit,reverse and ver-load protection,improve solar system efficiency and prolong the life span of the battery. LCD display indicate the status and data, easy to read. The value price is according to the reference and solar generation equipment that is required...
Autonomous electric power generators for residential, commercial, industrial and automotive properties.Fob
Pasteurized and frozen without seeds pulp (puree) of fruits.
Available Russian EN590 Directly with refineries. Best Price. TRANSACTION WORKING PROCEDURE FOB ROTTERDAM/HOUSTON 1. Seller's representative issues SCO and Buyer sends ICPO, CP and Tank Storage Agreement (TSA) as proof of storage availability. 2. Seller verifies TSA and issues Commercial Invoice for the available quantity. Buyer signs and returns the CI within 48 hours. 3. Seller issues to Buyer the transaction documents: - Product Origin Certificate - Statement of Availability of Product - Commitment to Supply - Authorization to verify via call or emails only. 4. After receipt of the certified copy of the transaction documents, buyer provides the seller with ATV, which must be previously approved by its Tank Storage company. 5. Upon receipt of the ATV and after successful inspection of buyerâ??s tank facilities by the technical team, seller issues the full POP documents below: - Fresh SGS Report - Seven (7) days Unconditional DTA - Loading Port Injection Report - Authorization to Sell and Collect (ATSC) 6. Upon complete verification of the POP documents, Buyer orders SGS to Conduct Dip Test of the product in Sellerâ??s Tanks at buyerâ??s expense. 7. Following the completion of the Dip Test with results consistent to the specifications on the CI, Buyer provides their TSR and ATI and Seller injects fuel into Buyer's leased storage tanks. Seller submits the full Injection report to the Buyer. 8. Buyer makes 100% payment by MT 103 TT wire transfer for the total product and Seller pays commission to all Intermediaries involved in the transaction within 24 hours after confirmation of the Buyerâ??s payment. 9. Seller issues draft SPA to Buyer to review for Roll & Extension monthly deliveries. 10. The subsequent delivery shall commence according to the terms and conditions of the contract, and intermediaries will receive their commissions according to monthly deliveries TRANSACTION PROCEDURE TABLE TALK MEETING (TTM) 1. Buyer confirms SCO and issue official ICPO with banking detail. 2. Sellers verify ICPO and issue Draft Contract open for amendments to Buyer. 3. Buyer review Draft Contract signs and returns with Buyer's international passport copy and NCNDA+IMFPA to seller. 4. Seller and Buyer legalized the signed Contract with the Ministry for approval and sends the scan copy of the Approved Draft Contract via secured e-mail to buyer.
Available Jet a1, very good prices directly with refineries. TRANSACTION WORKING PROCEDURE FOB ROTTERDAM/HOUSTON 1. Seller's representative issues SCO and Buyer sends ICPO, CP and Tank Storage Agreement (TSA) as proof of storage availability. 2. Seller verifies TSA and issues Commercial Invoice for the available quantity. Buyer signs and returns the CI within 48 hours. 3. Seller issues to Buyer the transaction documents: - Product Origin Certificate - Statement of Availability of Product - Commitment to Supply - Authorization to verify via call or emails only. 4. After receipt of the certified copy of the transaction documents, buyer provides the seller with ATV, which must be previously approved by its Tank Storage company. 5. Upon receipt of the ATV and after successful inspection of buyerâ??s tank facilities by the technical team, seller issues the full POP documents below: - Fresh SGS Report - Seven (7) days Unconditional DTA - Loading Port Injection Report - Authorization to Sell and Collect (ATSC) 6. Upon complete verification of the POP documents, Buyer orders SGS to Conduct Dip Test of the product in Sellerâ??s Tanks at buyerâ??s expense. 7. Following the completion of the Dip Test with results consistent to the specifications on the CI, Buyer provides their TSR and ATI and Seller injects fuel into Buyer's leased storage tanks. Seller submits the full Injection report to the Buyer. 8. Buyer makes 100% payment by MT 103 TT wire transfer for the total product and Seller pays commission to all Intermediaries involved in the transaction within 24 hours after confirmation of the Buyerâ??s payment. 9. Seller issues draft SPA to Buyer to review for Roll & Extension monthly deliveries. 10. The subsequent delivery shall commence according to the terms and conditions of the contract, and intermediaries will receive their commissions according to monthly deliveries TRANSACTION PROCEDURE TABLE TALK MEETING (TTM) 1. Buyer confirms SCO and issue official ICPO with banking detail. 2. Sellers verify ICPO and issue Draft Contract open for amendments to Buyer. 3. Buyer review Draft Contract signs and returns with Buyer's international passport copy and NCNDA+IMFPA to seller. 4. Seller and Buyer legalized the signed Contract with the Ministry for approval and sends the scan copy of the Approved Draft Contract via secured e-mail to buyer.
Carbonless computer forms 9.5 x 11 9.5 x 5.5 etc
Our COMPANY IS located in Bogot Colombia and we manufacture 100% Stainless steel water heaters, they Are fully automatic and operarte with Electric and /or Natural Gas. Please send a quotation request to send you a quotation We built all type of volumes from 4 to 40 Bathrooms Check our web page
Spare parts for sugar mills .Producer Marketing
Port: Rotterdam / Fujairah / Houston JET A1 91-91 Origin: Kazakhstan Quantity: 1,000,000- 10,000,000 Barrels per month Delivery: CIF / DIP & PAY Price: $102 Gross/$98 Net Per Metric Ton Delivery: FOB Price: $97 Gross/$93 Net Per Metric Ton TANK TO TANK PROCEDURE 1. Upon acceptance of Seller's Offer, Buyer issues Purchase Order (ICPO) and Passport Copy. 2. Upon acceptance of Buyer ICPO, Seller issues Commercial Invoice for Buyer's review and signing. 3. Buyer signs the Commercial Invoice and returns it to Seller along with their Tank Storage Agreement 4. Seller issues the POP Documents, as shown below: Dip Test Authorization, unconditional Fresh SGS Q & Q report Ullage Report Tank Storage Receipt Tank Injection Report ATV ATSC 5. Buyer and/or Buyer's surveyor inspects products in Seller tanks with the above documents with no hidden charges. 6. Seller issues Authorization to Transfer from Seller Tank to Buyer Tank upon Buyer's inspection satisfaction. 7. Buyer makes payment of the product within 24 hours, via MT103 or TT wire transfer upon the commencement of the injection of the products to Buyer tanks. 8. Seller transfers title ownership to Buyer. 9. The seller pays all intermediaries involved in the transaction.
Office and school supplies.
Medical And Industrial Goods.
Lighting.
Spare parts auto industry.
Medical Products and Other.Logistics Provider and Traders
Natural chewable toys for dogs.
Electric fence. Double insulated cable. Galvanized wire. Gauge 16 (1.6mm) polyethylene O.D. 6.2mm Roll with 50 mts. Black-orange color.
