Desoprime is an epoxy polyamide primer of two components with zinc phosphate as a preventive dye of the corrosion. When dried completely it creates a rust - resistant ,high strength coating.It is used as an epoxy primer for general use according to the painting instructions.
Desmozinc 500 is an epoxy polyamide primer of two components rich in zinc.When dried completely it creates a high strength coating very weather-resistant.It provides cathodic protection against local mechanical damage.It is used as an epoxy primer according to the painting instructions.
Desmepox 1000 is a two-component epoxy amine coating which when dried produces a coating whith excellent resistance to different chemical substances.It is used as an internal tank coating according to the painting instructions.
Desmofen is an acrylic polyurethane coating with two-component poly-gloss aliphatic isocyanate hardening .It has remarkable gloss and colour-shade.It is used as a polished finish for alluminium ,steel ,reinforced polyester and wood in a highly corrosive atmospheric environment.
Fujimar 500 is an anti-colour to protect shells from shellfishes and grass adhesion.It is an ideal coating for plastic , wooden and iron boats and for speeds of up to 35 miles.Fujimar 500 presents a change in its colour when it is outide of the water due to its composition.
Fujimar 600 is an anti -colour to protect shells from shellfishes and grass adhesion.It is ideal for plastic , wooden and iron boats and for speeds of up to 50 miles.It does not change its colour when it is out of the water.It contains a new microbict by prolonging the protection of the boat in the water.
We produce FUJI TROLL 235 Antifouling paint for fishing / cage nets - environmentally friendly. It contain no organic solvents and heavy metals. We have been producing FUJI TROLL 235 for more than 15 years and we have outstanding durability in the marine environment with a lifetime of 18 to 19 months in the sea. We have carried out in University Technological Educational Institute of Western Greece, Department of Fisheries and Aquaculture Technology all the toxicological tests required for FUJI TROLL 235 as well as resistance in salt and seawater. Our company produces FUJI TROLL 235 Antifouling under the most stringent environmental conditions according to European Union regulations.
Two-component self -leveling polyurethane coating without solvent with high chemical and mechanical strength.It is indicated for thickness up to 1-3 mm of moderate stresses such as office space ,gym exhibitions. It has a coverage of 1.4 kg /m2 per mm
FX 550 is a two-component epoxy coating for industrial floors.It offers increased resistance to abrasion,chemical effects and weather conditions. Shades: RAL 9016, RAL 7040, RAL 1015 & other shades on request Spreading rate : 200-300 kg /m2
Setafloor 7200 1C is a semi-solid colored polyurethane floor paint of one component with excellent friction resistance for indoor use.This resin flooring paint is indicated as a 0.3mm floor paint on medium strength floors such as car garages , warehouses , exhibition grounds. It has a coverage of 0.25-0.3 kg /m2 in two layers .
This product is made up of anti-alkali primer, modeling aggregate, colored primer, top coat for main material and water-based finishing paint, anti-alkali primer of which intensifies adhesion between this kind of art coating and substrate, reduces water absorption to substrate and prevents salt and alkali from separating. Main material of liquid granite may form color, pattern, crystal section and stereoscopic texture, which can reach adequate hardness. The coating is endowed with physical and chemical property of high weather resistance. Water-based finishing paint is situated at outmost part of coating system possessing hydrophobic nature & ventilation, anti stain, ultraviolet-ray resistance, anti-mildew & anti-alga etc. Finishing coat adopts liquid granite which may be blended with different colors to satisfy various architecture demands from different customers. It has quite good elasticity, comparative smoothness on surface, non-containing gravel and perfect simulation effect. The coating is perfect water resistant, stable dyeing, non-blushing, non-color difference, high decorativeness, high weather resistance, excellent insulation and energy saving etc. It also complies with national insulation & fire protection standard. Finishing coat: inorganic fiber board (thickness: 8mm, 10mm and12mm to be selected and to manufacture according to requirement details) Insulation course: extruded board (mineral wool board/polystyrene board/polyurethane and core material to be made as per design requirement) Selective thickness of insulation: designed thickness Substrate: inorganic resin board Specification: 600 x1200 (to manufacture according to requirement details) Fire protection: a class/ b1 class Installation method: bonding + anchoring -
This product takes fluorine resin as main film coating, also known as fluorocarbon paint, fluorine coatings and fluorine resin coating that may serve as a kind of finishing coat used for insulation decoration integrated panel. Due to fluorine element with considerable minus electrons, fluorine resin coating possesses specially-excellent property, such as weather resistance, heat resistance, low-temperature resistance, anti chemical, unique non-sticky property and low friction. Finishing coat: inorganic fiber board (thickness: 8mm, 10mm and12mm to be selected and to manufacture according to requirement details) Insulation course: extruded board (mineral wool board/polystyrene board/polyurethane and core material to be made as per design requirement) Selective thickness of insulation: designed thickness Specification: 600 x1200 (to manufacture according to requirement details) Fire protection: a class/ b1 class Installation method: bonding + anchoring -
Dustfree Automatic Paint Shop: 1. conveyorised automatic paint shop with static gun 2. paint shop with HEPA filter 3. automatic deionizing booth attached with paint shop 4. 10K clean room mandatory to automatic paint shop 5. automatic paint shop made with SS304 6. spindle conveyor with VFD control for automatic paint shop 7. flashoff zone , IR baking oven and UV curing oven for paint shop 8. easy alteration between different processes of automatic spray painting 9. air handling unit with filters for automatic paint shop 10. optional for vacuum metalization for this automatic paint shop 11. paint kitchen with diaphragm pump for automatic paint shop 12. this automatic paint shop featured with high quality, high vollume and low rejection
Interior ordinary putty powder is mainly used for leveling walls, since it is not waterproof, should be the surface to brush the paint, or will cause a large area off the powder, affect the appearance. This product can use within water directly, without glue. It has advantages as strong adhesion, easy to burnish, reserving powder, no wrapper, no crack, no bubble, low price. Apply to interior wall with full of batch.Mainly used as a paint primer leveling.
Property: Pva is a very versatile water-soluble polymer, performance is between plastic and rubber, appearance is white powder.Water is a good solvent pva.Pva has good membranous, to form the film with excellent, frictional resistance, stretching intensity, and oxygen insulated.Because pva with two functional groups of hydrophilic group and hydrophobic group, therefore has the interfacial activity, so the pva can be used as a polymer emulsion and suspension polymerization reaction of protective colloid. Cas no:9002-89-5 ec no:209-183-3 melting point:230-240âºc falshing point:79âºc molecular formula:(c2h4o)n Application: 1 the textile industry as a processing location between the cloth and the machine agent. 2 the paper industry as a pigment coating engineering cement and paper glue inside. 3 powder chemical building materials, such as ceramic tile adhesive, interface agent, the thin layer of putty, stucco gypsum, adhesive plaster, etc. Water resistant crack thickener.
Resin bond diamond Internal Diamond Grinding Wheel for HVOF coating Description of the Resin bond diamond Internal Diamond Grinding Wheel for HVOF coating: Resin bond diamond internal grinding wheels are mainly used for grinding tungsten carbide coating, ceramic coating, and other materials Various kinds of dimensions and shapes are available, such as flat shapes, cup shapes, dish shapes, etc. Feature/Benefit of the resin bond diamond interal grinding wheel 1. Good free-cutting 2. Good Abrasion Resistance 3. Availability in a broad range of applications in both Dry and Wet Condition 4. Improved Heat Resistance Application of the Resin bond diamond Internal Diamond Grinding Wheel for HVOF coating: 1. Internal grinder, 2. Tungsten carbide grinding, 3. Wet or dry grinding Specification of resin bond diamond internal grinding wheel: Type:Â 11,18, 11W Bond type: Resin, electroplated, metal type Grit: 50 2000 Concentration:100,125 to meet your requirements in every way, we need the following information Shape and Dimension of the wheels Grit size (Mesh, refer to Table 1) Concentration Bond(Resin, Vitrified, Metallic, Electroplated) Quantity
Reflection Protected Aluminum Ravg 90 0.4 0.7m Enhanced Aluminum Ravg 92 0.45 0.65m, Ravg 90 0.19 0.4m
Standard Overprint Varnish provides a durable protective coating for printed materials, enhancing their appearance and longevity. Available in gloss, matte, and satin finishes, it is suitable for various applications. Technical Specifications: o Viscosity: 30-35 seconds (DIN 4) o Drying Method: Air-drying or heat-drying o Finish Options: Gloss, satin, and matte finishes available o Substrates: Compatible with coated and uncoated papers o Coverage: 8-12 m/L o Shelf Life: 12 months in unopened containers
Water-Based Overprint Varnish is an eco-friendly alternative that provides a clear protective coating for printed materials. This varnish offers excellent clarity and adhesion while being safe for food packaging applications. Technical Specifications: o Viscosity: 20-25 seconds (DIN 4) o Drying Method: Air-drying or heat-drying o Finish Options: Gloss, satin, and matte finishes available o Substrates: Suitable for coated and uncoated papers o Coverage: 10-15 m/L o Shelf Life: 12 months in unopened containers
We are a leading manufacturer of high-quality Blazers, offering a variety of eco-friendly and durable options for every need. Our products are crafted with care, combining sustainability with style. Choose us for reliable, eco-conscious solutions. For Wholsale: We do ship our Products from Nepal TO all over the world.
