Nanometer lanthanum oxide used in piezoelectric materials, electric materials, thermoelectric materials, magnetic resistance materials, luminescence materials (powder) hydrogen storage materials, optical glass, laser materials, all kinds of alloy materials, preparation of organic chemical products of catalyst, and automobile exhaust catalyst, light conversion agricultural film.
The main USES of nano-cerium oxide are: 1. Cerium oxide is used as a glass additive to absorb ultraviolet and infrared rays and has been used in automobile glass.Not only can prevent ultraviolet ray, also can reduce the temperature inside the car, thereby save air conditioning electricity.2. The application of nano-cerium oxide to automobile exhaust purification catalyst can effectively prevent a large amount of automobile exhaust gas from being discharged into the air.3. Nano cerium oxide has been widely used in polishing materials.4, nanometer cerium oxide can also be used in hydrogen storage material, thermoelectric materials, nano oxide cerium tungsten electrode, ceramic capacitors, piezoelectric
solvent free flooring epoxy system two components used for producing high quality epoxy smooth flooring with high glossy surface. Where it based on epoxy resin and agents which are specially selected for their ability to withstand chemical attack Properties @ 25 c Color: White , grey , all required colors Gloss: Glossy Solid content by (WT): 100 % Mixing Ratio: 4 A : 1 B Specific gravity (mix ): 1. 60 0.03 g/cm3 Pot life: 35 min. Temp. of Application: ( 15 35 ) C Full curing time: 7 days Rate of use: 3 -5 m2/ kg ( depending on surface conditions )
Setapol 260 1C is an elastic coated polyurethane membrane of one component for long-lasting waterproofing.It has hydrophobic resistance to sun and frost while it is breathable with anti-corrosion properties.Setapol 260 1C is ideal for the sealing of roofs , balconies ,rooms , gardens , pots and for the protection of thermal insulation foam polyurethane. It also has coverage of 1.5 - 2.0 kg / m2 in two or three layers.
Setapol 450ML 1C is an elastic paint of aliphatic polyurethane base of a component with good mechanical strength.It has a particularly high resistance to sun and frost.There is also no yellowing on the surface.Setapol 450ML 1C is ideal as a finishing coat resistant to light alloys.
Desnamel Fast Dry is a fast -drying alkydic final coating with good gloss and preservation of hue.It is used as a primer as long as a final coating for steel in a slightly corrosive environment.
Desmopol Topcoat is a semi-acrylic polyurethane coating of two-components aliphatic isocyanate with good gloss .It is used as a final coating for the protection of structural steel in extremely corrosive environment, when light steadiness and preservation of the gloss is required.The minimum heat for drying is -10
Setapol 400ML 1C is an elastic paint of aliphatic polyurethane base of a component with good mechanical strength.There is no yellowing on the surface.Setapol 400ML 1C is ideal as a final sealant on moderate pedestrian traffic surfaces.It has coverage of 0.15 - 0,25 kg / m2 in two or three layers.
Setapol 400ML 1C is an elastic paint of aliphatic polyurethane base of a component with good mechanical strength.There is no yellowing on the surface.Setapol 400ML 1C is ideal as a final sealant on moderate pedestrian traffic surfaces.It has coverage of 0.15 - 0,25 kg / m2 in two or three layers.
Desmalkid Prime is a zinc phosphorus primer with an alkyd base which dries relatively quickly.It is usually used as a general purpose primer for Desmalkid Prime Systems for the protection of steel structures in mild to moderate corrosive atmospheres.
Desnamel 200 is a fast-drying zinc phosphorus primer with an alkyd base.It is an ideal primer to prevent rust in steel.It is also indicated for mechanical parts and where fast drying is required.
Desoprime is an epoxy polyamide primer of two components with zinc phosphate as a preventive dye of the corrosion. When dried completely it creates a rust - resistant ,high strength coating.It is used as an epoxy primer for general use according to the painting instructions.
Desmozinc 500 is an epoxy polyamide primer of two components rich in zinc.When dried completely it creates a high strength coating very weather-resistant.It provides cathodic protection against local mechanical damage.It is used as an epoxy primer according to the painting instructions.
Desmepox 1000 is a two-component epoxy amine coating which when dried produces a coating whith excellent resistance to different chemical substances.It is used as an internal tank coating according to the painting instructions.
Desmofen is an acrylic polyurethane coating with two-component poly-gloss aliphatic isocyanate hardening .It has remarkable gloss and colour-shade.It is used as a polished finish for alluminium ,steel ,reinforced polyester and wood in a highly corrosive atmospheric environment.
Fujimar 500 is an anti-colour to protect shells from shellfishes and grass adhesion.It is an ideal coating for plastic , wooden and iron boats and for speeds of up to 35 miles.Fujimar 500 presents a change in its colour when it is outide of the water due to its composition.
Fujimar 600 is an anti -colour to protect shells from shellfishes and grass adhesion.It is ideal for plastic , wooden and iron boats and for speeds of up to 50 miles.It does not change its colour when it is out of the water.It contains a new microbict by prolonging the protection of the boat in the water.
We produce FUJI TROLL 235 Antifouling paint for fishing / cage nets - environmentally friendly. It contain no organic solvents and heavy metals. We have been producing FUJI TROLL 235 for more than 15 years and we have outstanding durability in the marine environment with a lifetime of 18 to 19 months in the sea. We have carried out in University Technological Educational Institute of Western Greece, Department of Fisheries and Aquaculture Technology all the toxicological tests required for FUJI TROLL 235 as well as resistance in salt and seawater. Our company produces FUJI TROLL 235 Antifouling under the most stringent environmental conditions according to European Union regulations.
Two-component self -leveling polyurethane coating without solvent with high chemical and mechanical strength.It is indicated for thickness up to 1-3 mm of moderate stresses such as office space ,gym exhibitions. It has a coverage of 1.4 kg /m2 per mm
FX 550 is a two-component epoxy coating for industrial floors.It offers increased resistance to abrasion,chemical effects and weather conditions. Shades: RAL 9016, RAL 7040, RAL 1015 & other shades on request Spreading rate : 200-300 kg /m2
