This is a special paint with extreme adhesion to glass surfaces. It is sprayed onto any type of glass to produce coloured glass panels.
12cans per carton. High quality. 12cans x 16oz/per ctn.
Scope of application: 1. Electron, appliance, ironware, machine factory 2. Chemical, medicine factory, lab 3. Food, textile, supermarket, parking lot. Features: Dust-proof, waterproof, mold-proof, chemical resistant, wear-resistant, strong adhesion, smooth and seamless, simple construction, easy to clear and maintain. Construction technology: 1. Waterproof treatment: first floor needs well done waterproof; 2. Basic ground treatment: polish, fix and clean according the basic ground condition; 3. Epoxy primer: use strong Permeability and adhesion epoxy primer roll-coating one time, strengthen surface adhesion; 4. Epoxy putty: construction several times according practical demand, up to smooth without holes, mark of Batch cutter and sand polish; 5. Epoxy topcoat: use epoxy topcoat or slip-resistant topcoat roll-painting two times, when finished the floor is smooth and clean, color average and no hollowing. 25kg/drum.
Jelee water based glass baking enamel is made with modified acrylic resin as raw material. 25kgs in plastic drums.
Interior exterior water based paints.
Commercial paint for interior or exterior use. Various shades of Blue, green, red, yellow, tan, off white, gray. 275 gallon totes. 14 totes per truckload, 3850 gallons US.
Paints. Its all paced in 1/4/20/200 ltrs drum packing.
Acrylic paint for indoor and outdoor painting 200 cans
Brief Description: PLATIVE PLP4500 plating layer protective paint, is designed to protective the plating layer by improving abrasion resistance, scratch resistance, chemical corrosion resistance, insolation and heat stability. The paint of transparent has no effect on the color of plating layer, besides the paints of colorful can make the plating layer with different coloration. Operational Guidance: Prefabricated, diluted PLATIVE PLP4500 to a proper consistency and add 15% -25%to total PLATIVE SN30, mix completely. Clean and dry the plating layer, make sure no oil, no dust. To paint the layer with prepared paint by spraying, immersion or drawing. Then forced dry at 120 in 50 minutes, or air dry in more than 12 hours. Annotation: Before use, low-speed mixing of PLATIVE PLP4500 is required; dilute the product with special solution ALATIVE PLP4500, or else it could lead to paint deterioration.
As per paints standard. 1 ltr ~ 4 ltr, normal packing as well as Industrial standard packings.
oPPGI, Pre-painted Galvanized Iron oColor Coated Sheet Coil.
Usage of the Product: The Pinao water-soluble liquid may be supposed widely use in different area, such as coating, building materials, papermaking and so on. When the product uses in coating, it does not only have the function about covering, decorating and the protecting to the wall, but also shows us different culture in the building through the unique humanities view. The product appearance is stable; good quality can be storing does not agglomerate, and convenient to use. The Strength of the Product: 1, The tinting strength are strong, the exhibition color is good, has the soft good impermissibility with the resin, has the water charactersystem's versatility, is suitable in each water paint the coloration. 2, The light resistance, the weathering resistance and the alkaline resistance are perfect, the cover performance is good which is suitable for each kind of system coloration, we can guarantee the outstanding performance in outdoors area.. 3, The Pinao shuanglikaluo hose 55 type Colorants, its light resistance reaches 7-8 levels, the PH value is about 7-9, the product itself grinds degree of fineness below 20 particles which fit the national standards. 4, The packing are diverse: shuanglikaluo 55 hose color thick liquid, 100g, 1000g, 50 makes per packaging the retail sales is convenience which suitable for the family which use small amount each time. Alliance Policy: ¡¡ãpinao¡¡À the serial products, hopes with the general distributor communal development, presently allies the locally administered level: First batch stocks with goods 50,000 Yuan. Provincial capital city: The first batch inventory amounts to 100,000 Yuan .We do not collect the alliance expense, does not collect the rights and interests earnest money, after the conclude and sign contract, the preferential benefit provides the color mixer, the airless spraying machine and the high accuracy emperor scale, and mixes colors the color schemes book which needs, true zero risk alliance system. Enterprise honor: Our Company already pass through the ISO9001 and ISO4001 certification. The Enterprise products already pass through the China Environmental Labeling Scheme Certification, and widely use in the housing, the villa, the hotel and so on, the color thick liquid also use in the construction, the papermaking etc. Manufacturer¡¡¥s ability: Production for coating 8000 tons/year. Production of Color thick liquid 600 tons/year. Performance and Merits: Attains GB/T9755, GB/T9756 and GB18512 Certification. Colorants: 5kg/loaded in barrels, 1kg/bottled, 100g/hose Product use: The construction use, the inner and the outer wall decoration. The Post-Sale service: The 24-hour hotline is the same in China. Once technical Support from our Engineer each year which helps the distributor to rise up the skill when using the product. The Packaging: Coating: 20kg vat, keg 6kg.
Product data sheet Flutex 10 Product description Type: Latex wall paint, based on acrylic binder, matt. Flutex 10 provides a beautiful finish with a soft gloss. The product is easy to apply and to repaint, and it provides a robust and washable surface that stands spot cleaning. The opacity of tinted colours is indicated on the tinting label. Product application Suitable interior for walls, e.g. in institutions, offices, living rooms and corridors, where the surface is exposed to dirt and/or wear. Technical data Density: 1,35 kg/litre Gloss: 10, matt Solids: Weight%: 56 Vol.%: 40 Spreading rate: 8-10 m2 per litre and treatment£¨depending on the condition of substrate£© Wash ability Top Level (GB/T 9266-1988) Water vapour permeability: Sd= 0.21m equal to class 2, according to EN 7783-2 Application temp.: Recommended min. working temperature during drying/curing: +10¡æ Max. atmospheric humidity 80% RH Drying time at 20oC, 60% RH: Dry to touch: 1 h Recoat interval: 2 h Fully cured: Several days Dilution: 1st coat: Max. 10% water 2nd coat: Undiluted Cleaning of tools etc.: Water Storage: Cool, frost-free and tightly closed. 2.8L & 9.1L.
Flugger data sheet Facade 25 Product description Type: Acrylic emulsion elastomer wall covering facade paint, matt. Flugger Facade 25 is based on acrylic binder with high performance. It provides a weather-resistant, elastic, crack bridging and robust surface. The surface is permeable for water vapour, with a high barrier effect against CO2 and chlorides, which makes it suitable as concrete protection especially in urban environments. Protects the surface against formation of mould. The opacity of tinted colours is indicated on the tinting label. Product application Suitable exterior for finishing treatment on facades of concrete, masonry and plaster etc. Technical data Specific gravity: 1,35 kg/litre Gloss: 9 Solids: Weight%: 58 Vol.%: 43 Spreading rate: 8-10 m2 per litre and treatment£¨depending on the condition of substrate£© Wash ability Top level (GB/T 9266-1988) Application temp.: Recommended min. working temperature during drying/curing: +10¡æ Maximum atmospheric humidity 80 % RH Drying time at 20¡æ, 60% RH: Dry to touch: 1 h Recoat interval: 6 h Fully cured: Several days Dilution: 1st coat: 10% water 2nd coat: Undiluted Cleaning of tools etc.: Water Storage: Cool, frost-free and tightly closed. 2.8L & 9.1L & 18.2L.
Product description Type: Acrylic emulsion primer. Flugger Sealer is formulated with an acrylic micro-dispersed binder with unique penetration properties. Is alkaline resistant and provides an efficient sealing on slightly chalking and absorbent surface. Product application Suitable for interior priming of building materials, e.g. gypsum board, light concrete, limestone, brick, plaster, cement fibre plates, concrete as well as fillers. Technical data Density: 1,01 kg/litre Solids: Weight%: 14 Vol.%: 13 Spreading rate: 3-7 m2per litre depending on the substrate Application temp.: Min. working temperature during application and drying/curing: + 10¡æ Max atmospheric humidity 80 % RH Drying time at 20¡æ, 60% RH: Dry to touch: 1 h Recoat interval: 6 h Fully cured: Several days Dilution: Water Cleaning of tools etc.: Water Storage: Cool, frost-free and tightly closed. 10L.
Product properties Flugger 377 Adhesive roll-on is a PVA-reinforced adhesive, which is transparent when dry. Application For interior hanging of light glass tissues and glass felt. Also suitable for the hanging of light, paper-backed textile wall coverings and for non-woven wall coverings. Also suitable for the hanging of Flugger Structure. Only for use in dry rooms. Technical data Type: Adhesive for tissue wall coverings Density: 1.02 kg/litre Solids: Weight%: 19 Vol.%: 16 Spreading rate: 4-5 m?per litre Application temp.: Min. +150C Cleaning of tools: Immediately with hot water and soap Storage: Cool, frost-free and tightly closed. 3L & 5L & 12L
Enamel top coats, under coats, emulsion, stucco, p.V.A. Primer, epoxy top coat, epoxy under coat, wash primer, thinners. 5 usg or 18.9 ltr.
Red oxide.
Low toxicity, a little odor and biodegradable, which can be used in costing, ink, rubber, fiber, plastic, resin and chemical intermediate. Steel drum Net w.220kgs/drum.
Paints
