a. Price of product - depends on customers product b. Product origin - Turkey c. Key Specifications/Special Features d. Minimum Order Size : 1 full Truck or 1 full container e. Packaging Details: Euro pallets- Wooden boxes or other customer-specific packaging details.
we are manufacturer of machining parts.For denmark , we have produced some haevy lathe works (asphalt machine parts) since 2008 .We are open about your machining needs
Automotive ,service equipment,hand tool,consumable material and special tools
Composite natural gas service box
Precise machined parts Producing and assembling the critical parts with closed tolerance made of titanium, stainless steel, aluminium alloys and brass, copper, engineering plastics etc. The company is certified to AS9100 Quality Management System and it is an approved supplier of TAI, TEI, Alp Aviation. Medmakina is also working with main contractors on several aerospace industry projects mostly in engineering and manufacturing fields. Programs supported with aero-structural parts are; Boeing, Airbus, JSF. Special Processes such as surface treatment, heat treatment, welding, marking etc. are outsourced to NADCAP approved suppliers. -
Aluminium rollers
Profile connection parts, chrome metal feet, corner connection cover, glass seal, hammer screw, head bolt, jagged nuts, pls sheet t, profile caps, puller type connection, rectangular nuts, spring slot nuts, spring slot nut, t slot nut,
3 Unit Working Table I.Table Outer Dimensions, 2800x1400mm II.Table Outer Dimensions , 2400x1400mm III.Table Outer Dimensions , 1200x1400mm Automatic Moving Turbine Manuel and Automatic Control Fault Control Section Waiting Station Special Design Mold System Temperature Measurement Unit , Infrared Sensor 3-4 min Operation Time Audible-Visual Fault Warning System Phase Protection Leakage Relay 29 Kw Heater Energy Consumption 30 Kw Total Energy Consumption Schneider-Delta Electrical-Electronical System 63 m³/Hour Vacuum Pump 71 Dba Noise Level 1950 Kg Machine Weight 9320mm Machine Length 1795mm Machine Width 1450mm Machine Height
3 unit working table I.Table outer dimensions, 2800x1400mm II.Table outer dimensions , 2400x1400mm III.Table outer dimensions , 1200x1400mm Automatic moving turbine Manuel and automatic control Fault control section Waiting station Special design mold system Temperature measurement unit , infrared sensor 3-4 min operation time Audible-visual fault warning system Phase protection Leakage relay 29 KW heater energy consumption 30 KW total energy consumption Schneider-delta electrical-electronical system 63 m³/hour vacuum pump 71 dba noise level 1950 kg machine weight 9320mm machine length 1795mm machine width 1450mm machine height. 1950 kg.
Working Area: 2100x3660mm Automatic Tool Change System (7+1) Bakelite Flat Table X-Y1-Y2 Axis 1 Kw Delta Servo Motor R:1/9 Reducer Z Axis 0.75 Kw Servo Breaking Motor 7.5 Kw 18.000 rpm AREL Spindle Motor 2000 m³/hour Dust Sucking System 3 Unit 100m³/hour Oil Cycle Cooling Vacuum Pump Hust Professional CNC Control Panel ALPHACAM 2D Software (3D Upgrading and Part Reading Specification,Optional) Electric Systems Delta and Schneider X-Y Axis Speed 60 m/min Program Sensitivity 0.001mm Working Sensitivity 0.001mm Positioning Sensitivity 0.001mm Maximum Power Supply 17.2 KW X-Y Axis Moving with Helical Gear Z Axis Moving with Screw Mil 2 Unit X Axis Linear Rail Right and Left 4 Unit Y Axis Linear Rail 2 Unit Z Axis Linear Rail Fault Warning and Determined Working with ISO GCODE Working with DXF, DWG, IGES 1 year Part 2 year service Guarantee Free Assembly and 80 Hour Program and Machine Education 80 Unit Free Macro (Door&Cover) Online Service Fast Service and Intervention in 3 Workday Automatic Time Adjustment Lubrication System Automatic Air Sensor to Shut down system when air pressure drop. All Axises protected by switches and sensors.
The 2-Axis series of CNC automatic lathe is gang type tools holder design which could save tool change time. 2-Axis series also can be used with servo motor live tool. Standard Accessories •OD Turning tool holder x 3pcs •Drilling tool holder ER-16-Ø20(One station) x 2pcs •Drilling tool holder ER-16-Ø20(Two station) x 1pc •ER-16 collet chuck x 3pcs •Parts catcher •Tool box •Heat exchanger •Operation manual •Interface for bar feeder Optional Accessories •1-position cross drilling tool holder (servo driven) •1-position face drilling tool holder (servo driven) •3 meter hydraulic barfeeder •Parts conveyor •Chip conveyor with cart •Transformer •Voltage stabilizer •4" 3-jaw chuck •6 position hydraulic turret •CE certification
Aluminium gravity casting parts; permanent mold castings. Euro pallet wood case
Table: 550*1200mm X Travel:1000mm Y Travel: 600mm Z Travel: 600mm BT40#8000 r.p.m. Table loading:1000kgs Auto Tool changer(standard/option): 20/24 Rapid Feed Rate: 30(Linear X.Y)20(Box Z)m/min Cutting Feed Rate: 5-10000mm/min Spindle Motor(standard/option):15 hp 3 Axes Motor(X/Y/Z): 2/2/2 kw Controller: Fanuc/Mitsubishi. Table Surface Mm 610*1400 T-Slots Mm 18*5*100 Table Loading kg 1200 X Axis Longitudinal Travel mm 1200 Y Axis cross Travel Mm 600 Z Axis Vertical Travel Mm 600 Spindle Center to Table Surface Mm 120~720 Spindle Center to column Surface Mm 610 Door opening Width Mm 1400 Spindle Taper(Standard/Option) BT40 Spindle Speed Rpm 8000/10000,12000 Rapid Feed Rate M/min 30(Linear X.Y)20(Box Z) Cutting Feed Rate Mm/min 5-10000 Spindle motor(Standard/option) HP 20 3 Axes Motor(X/Y/Z) kw 3/3/2 Auto Tool changer(Standard/option) 20/24 Power Requirement kw 30 Air Pressure KGS/CM² 6 Cooling Motor HP ¾ Cooling Tank Capacity L 300 Machine Weight kg 7000 Machine Size(L*W*H) mm 3200*2200*2500 Controller.
Table:450*900mm X Travel:800mm Y Travel:500mm Z Travel:500mm BT40#8000 r.p.m. Table loading:400kgs Auto Tool changer(standard/option):16/24 Rapid Feed Rate: 36/36/30(Linear X.Y.Z)m/min Cutting Feed Rate: 5-10000mm/min Spindle Motor(standard/option): 7.5 hp 3 Axes Motor(X/Y/Z):1.5/1.5/2 kw Controller: Fanuc/Mitsubishi. Table Surface Mm 900*450 T-Slots Mm 16*4*95 Table Loading kg 400 X Axis Longitudinal Travel mm 800 Y Axis cross Travel Mm 500 Z Axis Vertical Travel Mm 500 Spindle Center to Table Surface Mm 120~620 Spindle Center to column Surface Mm 500 Door opening Width Mm 900 Spindle Taper(Standard/Option) BT40 Spindle Speed Rpm 8000(belt)/10000,12000 Rapid Feed Rate M/min 36/36/30(Linear x.y.z) Cutting Feed Rate Mm/min 5-10000 Spindle motor(Standard/option) HP 10 3 Axes Motor(X/Y/Z) kw 1.5/1.5/2 Auto Tool changer(Standard/option) 16/24 Power Requirement kw 25 Air Pressure KGS/CM² 6 Cooling Motor HP 4/3 Cooling Tank Capacity L 120 Machine Weight kg 3900 Machine Size(L*W*H) mm 2200*2200*2260 Controller FANUC/MITSUBISHI.
Max.swing over bed:440mm Max.turning diameter:200mm Max.turning lengh:215mm Spindle speed range:45~4000rpm. Number of tool station: 8 Turret indexing time: 0.3sec Machine design: 20° deg Max stroke X-axis:120 mm Max stroke Z-axis: 225 mm Slide way type: Square way Spindle motor: 5.5 kw Controller: Fanuc/Mitsubishi. Max.swing over bed mm 440 Max.turning diameter mm 200 Max.turning lengh mm 215 Material collect length mm 100 Spindle max.bar capacity mm 42 Spindle bore diameter mm 55.5 Spindle nose A2-5 Spindle speed range Rpm 45~4000 Spindle motor Kw 5.5(7.5) Number of tool station 8 Max.stroke X-axis mm 120 Max.stroke Z-axis mm 225 Rapid traverse X -axis m/min 12(16) Rapid traverse Z- axis m/min 12(16) Turret indexing time Sec 0.3 Machine design deg 20° Slide way type Square Guide way Spindle hydraulic chuck inch 6" Turning tool diameter mm 20 Boring tool diameter mm 25 Hydraulic motor kw 0.75 Lubrication motor w 3.5 Power requirement Kva 15 Coolant tank capacity L 100L Machine dimensions(L*W*H) mm 2255*1800*1800 Weight kg 2235.
Table:610*1400mm X Travel:1200mm Y Travel:600mm Z Travel:600mm BT40#8000 r.p.m. Table loading:1200kgs Auto Tool changer(standard/option):20/24 Rapid Feed Rate:30(Linear X.Y.)20(Box Z)m/min Cutting Feed Rate:5-10000mm/min Spindle Motor(standard/option):20 hp 3 Axes Motor(X/Y/Z):3/3/2 kw Controller:Fanuc/Mitsubishi
Plasma cutting machine with CNC. CNC Hypertherm edge, plasma torch hypertherm powermax 1650 + 1 gas torch Tanaka. Cutting table. 1500x3000 mm.
Ermaksan is continuing to provide wide and flexible solutions by its new Plasma Cutting Machine has high and accuracy cutting quality, the advantageous of low working and investing cost, convenient for placing in a production line and for automation. Ermaksan Plasma Cutting Machine can easily be operated and carried. It's produced with latest production technologies and used well-known and accepted cutting and CNC equipments.
To get perfect cutting results, Lasermak frame and components are specially machined in CNC machining centers with maximum precision. Lasermak is equipped with linear motors which is an optional specification in most cases for other brands. The axis, moving along with strong magnets mounted on the frame, provide high speed and maximum acceleration. (Y axis 3G). This high speed and acceleration enables your company to increase efficiency and productivity while also decreasing operational costs. Frame and bridge are assembled by expert engineers and tested with latest high-tech measuring technology in every phase of manufacturing process. This is the main reason of the perfectness in square and circular cutting. There is no need for a second operation and Lasermak produces parts ready for assemble.
WHY FIBERMAK ? * 60% - 100% faster compared to other laser cutting machines. Axes equipped with Bosch - Rexroth linear motors and drivers reach to 120 m/min. speed and accelerations are 2 G on Y, 1,5 G on X axes * Cuts thin materials 3 times faster compared to Co2 lasers and energy consumption is simultaneously lower * 70% energy save by fiber optic laser technolohy is plant friendly. * There is no need for laser-mix gas which is used Co2 laser cutting machines as there is diode technology is used for Fibermak. * There is no need for optical components like beam path, folding mirror and quartz tube etc. as laser transmitting is done by fiber cable * You can make production 24 hours a day and may save 50% per each costs * You can prevent from production faults by automation in your premises * You save from moulds and apparatuses. * You may cut aluminium, copper, brass and other reflecting materials precisely with smooth surface quality. (You may reflecting materials such as aluminium, copper, brass, etc. Precisely and by smooth surface quality) * FIBERMAK has strong frame, equipped with worldwide well known, quality and long life, quality components and designed to work accurately and continously even at hard conditions. * Fast and high quantity production capacitated ERMAKSAN reflects this advantage as price to its customers. Creative designs with always highest level technology and quality are the main principles. EFFICIENT High cutting speeds with integrated distance sensorShort Conversation times with fast hanging of focal lenghtsOptimized cutting gas flow FLEXIBLE Cutting of different material thicknesses2D cuttingFocal lenght tailored to your applicationAll media connections located in upper part USER FRIENDLY & SAFE Simple and safe cartdridge replacement system with TCP retentionSast change of protective glassMotorized focal position adjustment (optional)Temperature monitoring of the sensor insertCartdridge monitoring for presenceMagnetic breakaway coupling POWER AUTOMATION CONTROLLER Power Automation CNC control with integrated inputs and outputs The open, browser-based human machine interface PA HMIThe PA 8000 LW CNCThe Pa dongle which includes all needed software functions for fiber cuttingThe I/O module PAMIO which provides 4 analog in - and outputs
