Features: Inner surface has dual gripping ridges Bolts lugs are reinforced to prevent bending out of alignment Measure hose OD accurately before ordering clamps Torque values for clamps are based on dry bolts. The use of lubricant on bolts will adversely affect clamp performance Model Number: DOUBLE BOLT CLAMPS SL22â??SL1275 Norms:DIN20039 Maxi W.:16/25bar Type: Hose Clamps (double bolt) two parts with overlapping cast-on-saddlesHose Clamps (double bolt) DIN 20039 A, two parts with loose saddlesHose Clamps (double bolt) DIN 20039 B, two parts with loose saddles and safety clawsMaterial: Metal, Iron or Carbon Steel Structure:Saddle Clamp, Saddle Clamp, Double Bolt Clamps Surface treatment:galvanized iron ,sand blast ,grin Color:yelllow colorful zinc,bule white zinc
ADSS Preformed Suspension Clamp The base is attached by a rear hinge for quick and easy installation of ADSS cables Cushioned pad made of UV resistant neoprene sleeve insert to gently hold the ADSS cable in place Includes stainless steel bolts and locking washers for locking clamps ADSS Suspension Clamp Suspension clamps are also called fixture suspension or suspension fittings. According to the application, the suspension clamps are divided into ABC optical cable suspension clamps, ADSS optical cable suspension clamps, and overhead line suspension clamps. ADSS Optical Cable Suspension Clamp Suspension cleats for ADSS cables are also known as prefabricated suspension cleats. Prefabricated catenary clamps that function the same as ordinary catenary clamps are designed to suspend conductors or ground wires in a vertical direction. Huaneng prefabricated suspension clamps are suitable for high voltage above 220kv. Unique features of prefabricated suspension clips: Effective protection of conductors Avoiding Electricity Waste Due to Corona easy installation Prefabricated suspension clamps are designed to protect ADSS (All Dielectric Self Supporting) cables from sloshing caused by wind currents. Suspended clamps are widely used in transmission lines, towers or power distribution systems. The distance between the two towers is called the span. For short spans, prefabricated suspension clamps with O-rings are often used. This kind of suspension clamp has the characteristics of lightest weight, convenient installation, and can protect ADSS optical cable more effectively. For mid-span and long-span, there is also a prefabricated suspension clamp that is aluminum-clad. The Armor Clip Suspension connects with U-Clips to hang cables. Aluminum-clad suspension clamps support and protect ADSS fiber optic cables from bending damage. According to the span, the short span adopts single suspension clamp, and the long span adopts double suspension clamp. Composition: inner pre-twisted wire, the outer pre-twisted wire, rubber insert, cast aluminum shells, right-angle shackle, U-type shackle. Purposes: supporting cable, make the ADSS hang on the tower.
ADSS with The DN Short-span Tension Clamp ADSS (All-Dielectric Self-Supporting) tension clamp is a device used to attach and support ADSS cables to poles or towers in overhead fiber optic cable installations. It is designed to grip the cable without damaging it while also providing the necessary tension to keep the cable taut and secure. Tension Clamp ADSS (All-Dielectric Self-Supporting) tension clamp is a device used to attach and support ADSS cables to poles or towers in overhead fiber optic cable installations. It is designed to grip the cable without damaging it while also providing the necessary tension to keep the cable taut and secure. The ADSS tension clamp is typically made of corrosion-resistant materials such as aluminum or plastic and is available in different sizes to fit various cable diameters. Composition: twisted wire, thimble, PH-type shackle, U-type shackle etc. Purposes: support all strain, make ADSS cable connect the strain pole and tower. Features: Preformed wire connect the pole and tower by thimbles etc. link fitting, afford the load of the transmission line. Grip strength not less than cable 95%RTS in case that not more than lateral pressure of the cable E xcellent aluminum clad steel improve the mechanical and resist-corrosion function, extend life. Corrosion-resistant materials such as aluminum or plastic to ensure durability and longevity. Gripping mechanism that securely holds the cable without causing damage. Tensioning mechanism that allows for adjustment of the cable tension. Insulating material to protect the cable from electrical currents. Suitable for use with a range of cable diameters. Easy installation and maintenance. Technical requirements: meet the DL / T 766-2003 ADSS with the preformed helical fittings technical requirements and test methods
ADSS Downlead Clamp DownLead Clamp, also called lead wire pads, are fixed to poles or strain relief towers to guide fiber optic cables up or down through them. According to the application, the lead wire clips include tower lead wire clips, pole lead wire clips, ADSS lead wire clips and OPGW lead wire clips. Downlead Clamp DownLead Clamp, also called lead wire pads, are fixed to poles or strain relief towers to guide fiber optic cables up or down through them. According to the application, the lead wire clips include tower lead wire clips, pole lead wire clips, ADSS lead wire clips and OPGW lead wire clips. The tower clamps consist of a stainless steel band and a rubber part. The stainless steel band is used to fix the rubber clip on the pole. At the same time, the rubber part fixes the optical fiber. This way, the fiber does not shake and at the same time reduces damage caused by friction. The lead wire clamps for towers have a different structure than the lead wire clamps for poles. The clamps consist of steel brackets, bolts and nuts, and rubber parts. The bolt secures the lead clip to the tower. Compared to other lead clip manufacturers, Jingyoung offers the end user a wide range of lead clip design options. huaneng lead clips can be custom manufactured with a wide range of cables, materials and different connection options.
Tension Clamp for Earth Wire Tension Clamp For Earth Wires are for use by trained craftsmen only. Dead-end clamps should not be used by anyone unfamiliar or untrained in their use. Wire Tension Clamp Tension clamps are designed to non-rigidly secure installation cables to brackets, fasteners on buildings, or utility poles. Cable clamps are installed at the beginning and end of cable runs, suspensions, branches and turns. Tension clamps can also be used where cables sag on large straight sections or form under the influence of increased tensile loads. The design of the products is simple. One of the most popular consists of a cone, a pair of plastic toothed wedges that act as clamping devices, and a steel ring. The principle of operation is simple and consists of self-tensioning the cable using the movable wedges of the clamp. The sale of tension clamps and their use significantly reduces the time and physical costs of installation work. This cable attachment element offers the following advantages There is no need to strip the insulation to expose the mating cable during use; Simple installation, reducing the possibility of errors; No special training of installers is required; No special tools are required to prepare cables for installation; Reduced risk of cable damage and compromised integrity.
ADSS Preformed Suspension Clamp The base is attached by a rear hinge for quick and easy installation of ADSS cables Cushioned pad made of UV resistant neoprene sleeve insert to gently hold the ADSS cable in place Includes stainless steel bolts and locking washers for locking clamps ADSS Suspension Clamp Suspension clamps are also called fixture suspension or suspension fittings. According to the application, the suspension clamps are divided into ABC optical cable suspension clamps, ADSS optical cable suspension clamps, and overhead line suspension clamps. ADSS Optical Cable Suspension Clamp Suspension cleats for ADSS cables are also known as prefabricated suspension cleats. Prefabricated catenary clamps that function the same as ordinary catenary clamps are designed to suspend conductors or ground wires in a vertical direction. Huaneng prefabricated suspension clamps are suitable for high voltage above 220kv. Unique features of prefabricated suspension clips: Effective protection of conductors Avoiding Electricity Waste Due to Corona easy installation Prefabricated suspension clamps are designed to protect ADSS (All Dielectric Self Supporting) cables from sloshing caused by wind currents. Suspended clamps are widely used in transmission lines, towers or power distribution systems. The distance between the two towers is called the span. For short spans, prefabricated suspension clamps with O-rings are often used. This kind of suspension clamp has the characteristics of lightest weight, convenient installation, and can protect ADSS optical cable more effectively. For mid-span and long-span, there is also a prefabricated suspension clamp that is aluminum-clad. The Armor Clip Suspension connects with U-Clips to hang cables. Aluminum-clad suspension clamps support and protect ADSS fiber optic cables from bending damage. According to the span, the short span adopts single suspension clamp, and the long span adopts double suspension clamp. Composition: inner pre-twisted wire, the outer pre-twisted wire, rubber insert, cast aluminum shells, right-angle shackle, U-type shackle. Purposes: supporting cable, make the ADSS hang on the tower.
We manufacture PVC,TPE and EPDM Profiles for pipe clamps in any sizes as our customer regusted.
Pipe Down Hold Clamps
Lorem ipsum dolor sit amet, consectetur adipiscing elit, sed do eiusmod tempor incididunt ut labore et dolore magna aliqua. Ut enim ad minim veniam, quis nostrud exercitation ullamco laboris nisi ut aliquip ex ea commodo consequat. Duis aute irure dolor in reprehenderit in voluptate velit esse cillum dolore eu fugiat nulla pariatur. Lorem ipsum dolor sit amet, consectetur adipiscing elit, sed do eiusmod tempor incididunt ut labore et dolore magna aliqua. Ut enim ad minim veniam, quis nostrud exercitation ullamco laboris nisi ut aliquip ex ea commodo consequat. Duis aute irure dolor in reprehenderit in voluptate velit esse cillum dolore eu fugiat nulla pariatur.
Product Full Description Lorem ipsum dolor sit amet, consectetur adipiscing elit, sed do eiusmod tempor incididunt ut labore et dolore magna aliqua. Ut enim ad minim veniam, quis nostrud exercitation ullamco laboris nisi ut aliquip ex ea commodo consequat. Duis aute irure dolor in reprehenderit in voluptate velit esse cillum dolore eu fugiat nulla pariatur. Lorem ipsum dolor sit amet, consectetur adipiscing elit, sed do eiusmod tempor incididunt ut labore et dolore magna aliqua. Ut enim ad minim veniam, quis nostrud exercitation ullamco laboris nisi ut aliquip ex ea commodo consequat. Duis aute irure dolor in reprehenderit in voluptate velit esse cillum dolore eu fugiat nulla pariatur.
SPM Pipe welding pneumatic clamps assure a rapid, accurate alignment of two joints of pipe during the welding operation. Front and rear heads operate independently to lock the clamp into position. A specially designed shoe on each head exerts pressure uniformly around the inside circumference of the pipe to maintain necessary alignment. Each pipe welding pneumatic clamp is easily and quickly adjusted for different pipe wall thicknesses.
In the realm of life-saving technology, the IT Clamp stands as a testament to innovation, efficiency, and reliability. This revolutionary anti-hemorrhaging device has not only been rigorously tested but has also proven its effectiveness in the field, garnering the endorsement of U.S. EMTs and the U.S. military. Key Benefits of the IT Clamp: Proven Lifesaver: The IT Clamp has demonstrated its life-saving potential in real-world scenarios, helping to control severe bleeding and stabilize patients in critical situations. FDA Approval: Our device has received full approval from the U.S. Food and Drug Administration, attesting to its safety and efficacy. Global Impact: The IT Clamp is now making its impact felt worldwide, with shipments reaching various corners of the globe. It is fast becoming an indispensable tool in emergency medical care. Ease of Use: Designed with simplicity in mind, the IT Clamp can be easily applied by medical professionals, first responders, and even laypersons with minimal training. Compact and Portable: Its compact size and portability make it a convenient addition to any medical kit, ensuring rapid response to bleeding emergencies. We believe that the IT Clamp could be an invaluable asset in your medical toolkit. To discuss this exceptional device further, we would be delighted to arrange a presentation or provide you with additional information.
ADSS Preformed Short Span Tension Clamp Tension clamps are designed to hold conductors and strands evenly to prevent conductor deformation. This product is designed for bare and stranded conductors and is recommended for use with plastic sheathed conductors. China ADSS Tension Clamp ADSS tension clamps are designed to hold conductors and strands evenly to prevent conductor deformation. This product is designed for bare and stranded conductors and is recommended for use with plastic sheathed conductors. At the same time, the tension clamp can withstand at least 95% of the rated breaking strength of conductors and strands, and is made of high-strength materials. Composition: twisted wire, rubber insert, cast aluminum shell, right-angle shackle, U-shackle. Purposes: supporting cableï¼?make the ADSS hang on the tower. Features: 1. Component: preformed wire, rubber inserting, casting aluminum shell, right angle shackle, U shackle etc. 2. Usage: supporting,make ADSS cable hang on the pole and tower. 3. Features: a, stress on average, no concentration stress, protect cable better and increase the stiffness of cable in the mount point. b, good dynamic stress. It can provide enough grip strength(10%RTS) c, rubber inserting make abrasion low. d. excellent aluminum alloy improve the mechanical and resist-corrosion function, extend life. Technical requirements: meet the DL / T 766-2003 ADSS with the preformed helical fittings technical requirements and test methods..
Wholesale ADSS Suspension Clamp An ADSS (All-Dielectric Self-Supporting) Suspension Clamp is a component used in the installation of ADSS fiber optic cables. ADSS cables are designed to be self-supporting and do not require any metallic elements for support, making them suitable for aerial installations in various environments, including power distribution lines, railways, and more. The suspension clamp is an essential part of the ADSS cable installation process, as it helps secure the cable to the supporting structures, such as poles or towers. The primary purpose of the ADSS suspension clamp is to maintain the appropriate tension on the cable while preventing excessive bending or stress that could negatively impact the cable's performance and longevity. ADSS suspension clamps are typically made of materials that are durable and resistant to environmental factors such as UV radiation, extreme temperatures, and moisture. They are designed to hold the ADSS cable securely in place while minimizing stress and strain on the cable itself. The installation process of ADSS suspension clamps involves attaching them to the support structure and then securing the ADSS cable in the clamp. This process ensures that the cable is held in the correct position and tension, optimizing its signal transmission capabilities and overall reliability. Features Durable Construction: ADSS suspension clamps are typically made from materials that are resistant to environmental factors such as UV radiation, extreme temperatures, and moisture. This durability helps ensure the longevity of the clamp in various outdoor conditions. Corrosion Resistance: The materials used in the construction of ADSS suspension clamps are often chosen for their resistance to corrosion, preventing degradation over time due to exposure to harsh weather conditions.
An OPGW (Optical Ground Wire) tension clamp is a specialized device used in the installation and maintenance of OPGW cables. OPGW cables are composite overhead cables that combine optical fibers for communication purposes with a metallic ground wire for power transmission and grounding. The OPGW tension clamp serves the purpose of securely attaching the OPGW cable to the supporting structure, such as poles or towers, while maintaining the necessary tension. It plays a crucial role in ensuring the stability and reliable performance of the OPGW system. Here are some functions of an OPGW tension clamp: Cable Gripping: The tension clamp is designed to securely grip the OPGW cable to prevent it from slipping or becoming loose. It typically consists of specially designed jaws or grips that firmly hold the cable in place. Tension Adjustment: The clamp allows for adjustment of the tension applied to the OPGW cable. This feature is important to maintain the desired tension level in the cable, which is essential for its proper functioning and mechanical stability. Mechanical Strength: OPGW tension clamps are constructed using robust and durable materials, such as stainless steel or aluminum alloy, to provide high mechanical strength. This ensures that the clamp can withstand the tension forces exerted on the cable and withstand environmental conditions, such as wind and ice loading. Electrical Continuity: The tension clamp also maintains the electrical continuity of the metallic ground wire within the OPGW cable. It provides a reliable connection between the cable and the supporting structure, ensuring effective grounding and electrical performance. Corrosion Resistance: OPGW tension clamps are often designed with corrosion-resistant coatings or materials to withstand exposure to harsh outdoor environments, including moisture, UV radiation, and temperature variations.
Lifting, Rigging & Hardware Items Code No. JSI -80
Available in HDG, Electro-galvanized / Zinc Plating, Yellow Zinc and Black
VALVE, ROUGHNECK, URETHANE INSERT - FOREIGN MADE--P/N:9700382 Casing power tong accessories TQ340 internal and external gear 35Y 52.100-03 MAN33.373DFC chassis*front suspension balance beam rubber cover NK500E engine*Engine front bracket rubber pad assembly left Elevator accessories CDZ twistSpring 102*18�°/2250 Electric control box QST140-JPressure relief stop valve 140GF6-00 Drill pipe clamp accessories ZQ203-100 gear 0102-10M 88589 TDS-4 HOUSING SEAL GT350E Chassis* Front Steelboard first piece Winch drive shaft accessories ZJ32L6 Positioning device BA70001-18.09.00 Spherical roller bearing 2097128 Diesel generator set accessories ONAN-HDKAL-6.0 auxiliary oil pump JL462 Liquid end accessories JR5321TSN OFM600S mudguard ring P100012660A Anti-salt fluid loss reducer SHR-1 NOV top screen air seal 300-02-008 CYLINDER, LINK TILT DT12643 Filter Element, p/n GX-250x30. TIAN CHENG (hydraulic oil) UN-746D Mud Pump Diesel generator set accessories ONAN-HDKAL-6.0 oil pan gasket 185-6859 Power selection box accessory GJC40-17 pneumatic head VOLVO series dieselEngine Parts Fuel * Diesel Filter Element VOLVO Drill pipe tong accessories ZQ203-100 pin 0101-39M Weichai diesel engine accessoriesEngine * cylinder liner sealing ring 4100 Liquid end accessories GJC45-21 SMP-600 Plunger One Brass Ring 4 1/2" Galvanized welded steel pipe 50*3.5mm Q235A 110147-3 SHIM: RESERVOIR .010 VARCO TDS 35�?35 BOP accessoriesFZ35*35 stainless steel hole retaining ring �?105 Drill pipe hanger accessories 3-3/8~12-3/4/B type lifting pliers long pliers 04 19 3 Varistor CK260 4P6009 1206 GT350E Fuel* Injectionmouth Filter Element, p/n 29510910. ALLISON for CATERPILLAR C-15 transmission 51402-6 PIN, COTTER 1/8 X 3/4 56512-8-12-S ELBOW, XLONG 90-EXT PIPE37 Roller shaft accessories ZJ-30C hand brake valve 3517CF1-010D/5000100085 PRESSURE PLATE W18-03-000 Detroit Diesel PartsLubrication system*oil filter element 23530573 Detroit diesel engine parts electrical instrumentation system * air compressor assembly 16V149 285992 Z07140000003AA Outrigger cylinder TIMKEN bearing T921-902A1 25GZ BUSHING, SELF LUBRICATING 118844-16-20 Fault detection board Brake cabinet PC2-GZJCB Hydraulic control system accessoriesFKQ6406 Tracheal cable connecting plate flat mat 190 series diesel enginePieces Engine*Injector Guard Extractor H05-1001-010 BEARING, CAM FOLLOWER 30158767-04 Logging tool accessories Dipole acoustic logging tool KClog quadrupole transmitter transformer assembly 107643* Drill pipe clamp accessories ZQ203-100 Pipe clamp 1 1/2 Drill pipe clamp accessories ZQ203-100 Nut 010804-03M MAN33.373DFC Chassis* Cab Flip Axle Repair Kit AUTOMATIC\CANRIG\AY12202-1 For 1275AC-681 Weichai diesel engine accessoriesShaft group * Crankshaft front oil seal 4100 Hydraulic control system accessoriesFKQ6406 Copper pipeline oil buckle large DT11753 Bail 750 TON For canrig 1275 Bolt Catch Link for 30114594 Handle For MCC House Drawer LCJG-1X
NFC standard Suspension Clamp for LT and HT AB Cable.
Preformed tension clamp is also called preformed dead end or dead end cable clamp. The raw material of preformed tension clamp is aluminum clad steel wire or galvanized steel wire, For communication ADSS optical fiber, OPGW cable and OPPC. The unique pre-formed tension clamp design not only simplifies the installation but also ensures the safety of the cable connection. Terminal cable clamps provide excellent performance to protect ADSS/OPGW/OPPC cables from stress points and prevent signal drops during transmission. What is the raw material of the pre-formed tension clamp The raw material of the prefabricated tension clamp is aluminum-clad steel wire or galvanized steel wire. What is the purpose of prefabricated tension clamps Prefabricated tension clamps are designed to connect ADSS/OPGW/OPPC to overhead towers or poles. What are the types of prefabricated tension clamps The preformed tension clamp and guy wire dead end grips used on the conductor and earth wire look alike in shape, but there are really big differences in the specification, raw material, and strength requirement of the two types of guy grips. 1. Dead-end for short span ADSS Dead-end for short span ADSS with a small tension clamp material for aluminum-clad gang wire, mainly used for the corner towers, the middle of follow-tower and connecting the terminal tower, the largest installation file from the less than 100 meters. 2. Dead-end for medium/long span ADSS Dead-end for medium span ADSS in tension and large tension clamp material for aluminum-clad steel wire, mainly used for files larger than 100 meters away from the corner tower, the middle tower and Terminal Tower successive connection. As an experienced manufacturer and supplier of preformed tension clamps, Boersen Photoelectric is able to OEM to customer specifications. If you have any questions, please feel free to contact us.
