1) Product Introduction Dunba Nano Fuel-saving & maintaining Fluid for large vehicle¡± is a fuel-saving environmental friendly multi-functional lubricant additives made by 2 Nano materials with anti-wear and self-repair functions, produced by technical equipment with our own intellectual property rights (Patent No. ZL200810032849.1) and new scientific and technological achievement by China 863 high-tech Project. 2) Nine functions * Fuel saving: Fuel economy, engine oil saving, 5%-25% oil consumption saved; * Improve efficiency: Significantly improve the efficiency of mechanical transmission, increase the effective output power, and improve carrying capacity the vehicle; * Anti-wear: 80%-90% reductions in engine wear and tear, still can provide strong anti-wear protection under lubrication system failure and no engine oil condition. * Self-repair: Dynamically repair wear and tear, engine life is extended 2-3 times; * Fast start Strong lubrication performance, can effectively reduce the friction coefficient, improve the initial rotation speed; * Power strengthening: restore the engine cylinder pressure. Power increased by 5%-35%; * Noise reduction: effectively reduce engine noise and vibration * Corrosion prevention: prevent friction parts from corrosive pitting. * Environmentally friendly: improve engine oil burning, blue smoke and other conditions, to reduce exhaust particles by 20%-30% and smoke emissions by 50%. 3) Four Major Features Fast: engine working environment improved in 15 minutes, noise and vibration reduced, and power enhanced. Powerful: triple protection including inner reinforced, surface repaired and outer anti-wear by Nano-particles. Environmental Friendly: reduce exhaust particles and smoke emissions. No side effects: suitable for long-term use of various vehicles, without any adverse effects or side effects. 4) Two Major Breakthroughs Self-repair Nano particle repairs the wear & scuffing surface automatically, then fundamentally realizing the engine maintenance; Multi-functional : fuel-saving, anti-wear, self-repair and maintaining simultaneously. 5) Product Application This product can be easily and stably dispersed in all kinds of lubricants, suitable for various power systems of large vehicles, such as passenger cars, trucks and construction vehicles etc.. For those badly worn vehicles run for many years will have better anti-wear and repair effect. 6) Usage methods Add this product to engine lubricant, keep the engine idle for around 2 minutes, or add the mixed product with lubricant. Normal usage about 2.5% of the total lubricating oil, in other words, for large vehicle please mix 20 liters of lubricating oil with one bottle (500 grams). 7) Notice: 1) Noninflammable, in explosive, in corrosive; 2) Don't drink and avoid long time skin contact; 3) Protect from impurity and water; 4) Keep in normal temperature and avoid sunlight. 500g/bottle, boxes or customized.
1) Product Introduction Dunba Nano Fuel-saving & maintaining Fluid for Limousine¡± is a fuel-saving environmental friendly multi-functional lubricant additives made by 2 Nano materials with anti-wear and self-repair functions, produced by technical equipment with our own intellectual property rights (Patent No. ZL200810032849.1) and new scientific and technological achievement by China 863 high-tech Project. 2) Nine functions Fuel economy: saving fuel and engine oil, 5%-25% oil consumption saved; Engine protection: triple strong protection to ensure that the engine is powerful in any work condition; Anti-wear: 80%-90% reductions in engine wear and tear; still provide superior protection under the conditions of lubrication system failure or non-oil. Self repair: wear and tear repaired dynamically, engine life extended 2-3 times. Fast start: superior lubrication function can significantly reduce the friction coefficient and improve the initial rotation speed. Power strengthening: restore the engine cylinder pressure. Power increased by 5%-35%. Noise reduction: effectively reduce engine noise and vibration. Corrosion prevention: prevent friction parts from corrosive pitting. Environmentally friendly: improve oil burning, blue smoke and other conditions, reduce exhaust particles by 20%-30% and smoke emissions by 50%. 3) Four Major Features Fast: engine working environment improved in 15 minutes, noise and vibration reduced, and power enhanced. Powerful: triple strong protection including inner reinforced, surface repaired and outer anti-wear by Nano-particles. Environmental Friendly: reduce exhaust particles and smoke emissions. No side effects: suitable for long-term use of various vehicles, without any adverse effects or side effects. 4) Two Major Breakthroughs Self-repair, Nano particle repairs the wear & scuffing surface automatically, then fundamentally achieving the engine maintenance; Four in one, Fuel economy, anti-wear, repairing and maintaining simultaneously. 5) Application This product can be easily and stably dispersed in all kinds of lubricants, suitable for various power system of a broad range of cars, the anti-wear and repair effect is more excellent for those vehicles run for many years and badly worn cars. 6) Usage methods Add this product to engine lubricant, keep the engine idle for around 2 minutes, or add the mixed product with lubricant. Normal usage about 3.5% of the total lubricating oil, in other words, for ordinary car, please mix 4 liters of lubricating oil with one bottle (150 grams). 7) Notice 1) Noninflammable, in explosive, in corrosive; 2) Don't drink and avoid long time skin contact; 3) Protect from impurity and water; 4) Keep in normal temperature and avoid sunlight. Boxes, 150g/bottle.
1) Product Introduction ¡°Dunba Nano Energy -saving & maintaining additives for Machinery Equipment¡± is a fuel-saving environmental friendly product composed of 2 nano materials and multifunctional additives, produced by technical equipment with our own intellectual property rights (Patent No. ZL200810032849.1) and new scientific and technological achievement by China 863 high-tech Project. This product not only has strong lubrication of monomer and self-repair function of Nan0 particle, but also excellent anti-wear¡¢anti-oxidation & extreme pressure resistance performance. 2) Product Features 1), 5% -30% saving electrical energy, saving lubricating oil 50%; 2), dynamically repair wear and tear, maintenance equipment, reduce equipment repair costs; 3), anti-wear, friction reduction, vibration reduction, low temperature, noise reduction, improve efficiency, extend equipment life; 4), soluble in a variety of lubricating oil, do not change the nature of the original lubricating oil; 5), remove oil waste, prevent failure and reduce the mechanical incidents; 6), easy to use, safe, without changing any structure within the device. 3) Technical characteristic 1),This product is produced by organic and inorganic nano materials, not only possessing the function of strong lubrication & resisting extreme pressure of organic nano material, but also having intelligent self-repair performance of inorganic nano material. In the process of friction, the nano particles are induced by the friction heat, rapidly penetrating into the micro defect on the surface of metal friction, quickly repairing uneven friction surface, and forming extra smooth, high hardness friction surface, not only reducing the friction coefficient, but also improving the performance of extreme pressure resistance and anti-wear, thereby achieving the effect of energy saving, noise reduction and extending service life; 2), Structural stability, oxidation resistance, has excellent dispersion in the oil medium, can be added to any lubricating oil, nontoxic and no side effects, no harm to human body and the environment ; 3), Protect the equipment, make the wear and tear drop to the minimum. Thus, this product has anti-wear, friction reduction, anti-extreme pressure, self-repair etc. functions. According to energy conservation law, if the power consumed by friction reduced, the output power will be improved accordingly, also improve the efficiency of the equipment; thereby achieve the purpose to save energy, cooling, noise reduction, extended life and reducing maintenance costs 4) Product application The product is easy to stably disperse in a variety of lubricating oil, suitable for solving the energy saving and maintenance problem of steel, oil field, mining, cement, electrical power and other industries, as well as diverse power¡¢machinery equipments on trains, ships and other large transport industries. 5) Usage This product is mixed evenly in accordance with the amount of 3% of total lubricating oil, and added to the lubrication system of equipment. 6£©Notice 1)¡¢Noninflammable, in explosive, in corrosive; 2)¡¢Don¡¯t drink and avoid long time skin contact; 3)¡¢Protect from impurity and water; 4)¡¢Keep in normal temperature and avoid sunlight. 1KG/barrel or customized.
1product introduction This nano tech product is composed of copper nanoparticles, made by chemical reaction¡¢extraction and purification. And has good dispersion properties and oxidation resistance in various types of lubricant base oil and lubricating grease. 2) product application Mainly used for multi-functional lubricating oil, grease additives, base oil and grease are combined to form special lubricants, grease with the performance of self-repair¡¢anti-wear, friction reduction, anti-extreme pressure and energy saving, cooling, noise reduction. 3) major technologic characteristic Item Index Appearance Red brown viscous liquid. Ignition reduction ¨m¨% 65¡«80 Cu content¨cu ¨m¨% ¡ý 10 Viscosity / ¨pa•s ¨25¡æ 0.8¡«1.1 Specific gravity ¨m¨g/ml 1.14¡«1.18 Average grain size / ¨nm ¡ü 20 Centrifugal sedimentation stability / ¨% ¡ý 96 4) usage Lubricating oil is added 0.1% -0.5%, can be added to the grease 1% -3%. 5) transportation and storage Transportation is according to the regulation of non-dangerous goods; storage location should be dry, ventilated, away from fire and other dangerous goods. 25kg/barrel¡¢180kg/barrel¨customized.
1. Product Name: C5 Petroleum Resin for Road Marking Paint 2. Common Name: C5 Hydrocarbon Resin for Hot Melt Road Marking Paint 3. Appearance: Light yellow granule 4. Technical Index: Index Test Method Standard Soften Point íµ ASTM E28-58 95-105 Color # ASTM D-1544 5 Acid Value Vol % ASTM D-974 2.5Max Wax Cloud íµ ASTM D2500 137Max Specific Gravity g/cm3 ASTM D71-72A 0.96-0.99 Viscosity mpa.s ASTM D3835 250Max Ash Content Vol % ETM-E-99 0.03 Max 5. Character: It can increase coatings toughness, hardness and cohesiveness, form a smooth topcoat and keep resins at a stable status throughout the year by adding additives. It also has good miscibility with rosin resins. In advanced paints, it can make the paint film to be water resistance, UV resistance and chemical resistance and improve the bright and dryness appearances significantly. Light color, good fluidity, good stability, fast drying; Dispersed filler, no settlement, and high abrasion resistance; other good characteristics such as weather resistance stain resistance, leveling property adhesion etc. 6. Applications: Hot Melt Road Marking Paint. 7. Price: Get the latest price 8. Port of loading: China main port 9. Transit time: Within 10 working days 25kg net woven bag with PE bag inside or as clients' options.
Lubricant additives with nano technology.
Detergent products, water treatment, leather & tanning, rubber products, petrochemicals.
Activated Alumina FOR H2O2 PRODUCTION
High quality natural coconut shell activated carbon-----best-selling 1) Material: high quality natural Coconut shell activated carbon through scientific refining method. 2) Feature: large specific surface area, strong adsorption capacity, high mechanical strength and fast filtration speed, etc. 3) Usage: pure water purification, vehicle exhaust recycling, air purification, catalyst carriers, etc. Characteristics: •Large surface area •High pore volume •High mechanical strength •High adsorption capacity •High wear resistance •Easy to regenerate Show you specification before your place order •Send you sample from mass product before shipment •Release shipment after you confirm the sample •24 hours online service •Strong customs clearence experience, especially for Brazil, Russia.... 10 years experience for production and exporting
1. Product name: carbon black (n326, n330, n339, n347, n351, n375) 2. Common name: haf (high abrasion furnace black) 3. Cas no.:1333-86-4 4. Appearance: black powder or granule 5. Grades: n326 carbon black, n330 carbon black, n347 carbon black, n351 carbon black, n375 carbon black 6. Technical index: Item Index N326 N330 N339 N347 N351 N375 Iodine absorption g/kg 82ía7 82ía7 90ía7 90ía7 68ía7 90ía7 Dbp absorption 10-5m2/kg 72ía7 102ía7 120ía7 124ía7 120ía7 114ía7 Dbp absorption of compressed sample 10-5m2/kg 62 ~74 80~96 91~107 91~107 87~103 88~104 Ctab 103m2/kg 74~92 73~91 84~102 78~96 64~82 87~105 Stsa 103m2/kg 76ía9 75ía9 88ía9 83ía9 70ía9 91ía9 Nsa 103m2/kg 71~85 71~85 84~98 78~92 64~78 86~100 Stain strength % 103~119 96~112 103~119 97~113 92~108 106~122 Heating loss % ín2.5 ín2.5 ín2.5 ín2.5 ín2.5 ín2.5 Pour density kg/m3 455ía40 380ía40 345ía40 335ía40 345ía40 34ía40 300% fix stretch stress -3.9ía1.6 -0.9ía1.6 0.6ía1.6 0.2ía1.6 0.8ía1.6 0.1ía1.6 7. Average diameter: 25~35nm 8. Specific surface area: 73~108m2/g 9. Oil absorption: 78~125cm3/100g 10. Usage: it is mainly used in tyre tread, tyre body, tire sidewall, various kinds of rubber item and conveyer belt 11. Supplier: as the responsible supplier of carbon black n326, n330, n339, n347, n351, n375: henan kingway chemicals co., ltd 25kg net craft paper bag with pe bag inside
Coconut shell based granular activated carbon is regarded as the best absorbent, which can be used in continuous process in areas like water treatment(drinking & effluent water), removal of mercury from effluents or alkali cells, solvent recovery, gold recovery, removal of odour, gas masks, as catalyst carrier, for dechlorination of water, purification & separation of gases, kitchen hoods, dry cleaning etc.
Coconut shell activated carbon (6X12, 8X16 mesh) is suitable for gold rocovery in modern gold mines, mainly used for heap separation or charcoal pulp extraction of precious metals in the gold metallurgical industry. The coconut shell activated carbon we provide is made of imported high quality coconut shell. It is mechanically fired, has good adsorption and wear resistance, high strength and long service life.
Activated Carbon Column is made of high-quality anthracite, which is carbonized and activated. The product has large holes. It has the advantages of fast filtration speed, strong purification ability, high strength and repeated regeneration. It is widely used in painting operations, ink printing, spray booths, etc. The diameter is usually 1.5, 2.0, 3.0, 4.0, 6.0, 8.0mm, and the commonly used diameter is 4.0mm. The iodine value is usually 450-1000mg/g, and the packaging usually is 25 kg bags or 500 kg/bag, It also can be customized.
Industrial activated carbon is utilized for industrial air treatment in order to capture toxic air pollutants (primarily Volatile Organics Compounds, or VOC) from petrochemical plants, landfill sites, manufacturing operations, and chemical processing facilities. We generally provide clients with 4mm pellet activated carbon or impregnated activated carbon for special applications.
Acid Washed Activated Carbon is with low acid soluble iron content. Acid wash is specifically designed for use with low PH liquids or when a low metal/ash leachable activated carbon is desired. Some of the benefits of Acid Wash carbon include dechlorination of water, better taste, removal of bad odors, removal of color from water, removal of organic substances, etc. This activated carbon is also specifically designed for the removal of heavy hydrocarbons from recovered condensate. The acid washing process removes soluble silica from the matrix of the activated carbon to prevent leaching into the condensate. Acid wash carbon is also used in various applications such as Condensate de-oiling, semiconductor process water, dialysis treatment, point of entry treatment units, and protection of reverse osmosis membranes from chlorine and organic fouling.
Pellet Activated Carbon is created by extruding activated carbon into cylindrical shaped pellets with diameters ranging from 0.8 to 8 mm. Their high activity and surface area make it ideal for many vapor phase applications. The uniformity of its shape makes it particularly useful in applications where low-pressure drop is a consideration. Pellet Activated Carbon has a wide variety of uses removing contaminants such as volatile organic compounds (VOC's) and mercury from natural gas as well as controlling odor.
Pelletized Activated Carbon is a cylindrical-shaped carbon extracted from the chosen grade of coal. It features high mechanical strength and lends itself well to multiple cycles of regeneration. Its specific shape features a low flow resistance. It is typically used in applications like gasoline vapor recovery for automotive, air purification, odor control, solvent recovery, catalysis, and removal of corrosive gases.
We have been engaged in offering the utmost quality of Activated Carbon Granular & Activated Carbon Powder. Activated carbon Powder and Granules with rapid absorption is widely used in the sugar and fruit juice industry. These series products are made from high quality wood by chemical activation thermal activation process; it is used for decolonization and purification of sucrose, maltose, starch, wine, citric acid, food additives chemicals industries and have a wide use Industrial and Municipal wastewater treatments.
Powdered Activated Carbon (PAC) is similar to Granular Activated Carbon (GAC) as it is made from high quality coal, wood or coconut shell raw material. Powdered Activated Carbon (PAC) is a high performance absorbent engineered to remove harmful contaminants in the air, gas, and liquid phases. The potable water industry has long used PAC products to effectively remove taste and odor compounds, and provide clean water that is safe to drink.
Activated Carbon Pellets is a highly-active, pelletized carbon manufactured from selected grades of bituminous coal to provide high density and superior hardness. It is widely used in a wide variety of air purification and vapor phase applications. In addition, the extraordinary surface area and fine pore structure of pellet carbon offers excellent adsorption capacity, making it a popular choice for industrial air cleaning systems, room air purifiers, paint spray booths, odour control systems, etc. Also ideal for range hoods and ducted filter screens, to reduce chemical fumes and unwanted smells.
