Various fiber glass products include alkali-proof fiberglass mesh, fiber glass self-adhensive tape, fiberglass disc for cutting and grinding wheel, corner beads with or without mesh.
Fibre glass backing plate, flap disc.
Alkali-resistant fiberglass mesh is woven with fiberglass yarn and coated by acrylic acid or PVC. This product has perfect corrosion-resistant, high strength and good thermal insulations, which is mainly used to reinforce wall materials,gypsum,stone, mosaic,ceramic, cement, etc,especiallyfor outside and inside wall heart insulation system.lt is an ideal engineering material in construction Mesh size:2.85mmí½12mm, Area weight:60gO,70gO,75gO,80gO,85gO,90gO,110gO,125gO,145gO, 152gO,160gO,165gO,180gO,330gO,470gO,600O,etc. Weave:leno,plain Width:100cm(normal)50cm33cm20cmetc. Roll length:50m100mm200m300m800m1000m Color:white,yellow,green,blue,orange,red,etc Packing:each roll is packed in shrink-wrap film or plastic bag,rolls on pallets.
Fiberglass sleeving Type properties average voltage (v) high breakdown volage, resistant temperature 200 . 7000 middle breakdown volage, resistant temperature 200 . 4000 Low breakdown volage, resistant temperature 200 . 2500
Fiberglass backing plate for flap disc: Layer: 6-12 Type: T27, T28, T29 Size: 75mm, 85mm, 90mm, 95mm, 107mm, 117mm, 140mm,170mm, 220mm
Introduction: Basic Materials: Epoxy resin, curing agent and alkali-free glass cloth Specifications: Performance: Good dielectric properties and machinability Temperature Classification: Heat resistance is different according tot he raw material (B/F/H)GB/T 5132.1-2009 IEC61212-1:2006 Application: It can be used as insulation structural components for electrical equipment. Can be made into a dry-type transformer coil insulation tube and transformer insulation end.
Brief introduction: 1. Producing procedure: Fiberglass yarn impregnated with epoxy resin etc, and then rolled in wet method, and then dried and consolidated. 2. Characteristics: It has excellent electrical and mechanical properties, low dielectrical loss, no deformation, chemical resistant etc. It can be used as main insulator on H grade dry type transformers, load tap changer, reactor, lightning protector, SF6 Inductor etc. 3. Heat resistance class: F,H
White fused alumina, silicon carbide, garnet sand, silica sand, fused silica, glass beads.
Molybdenum power plates, sheet, disks, electrodes, boats, rods, molybdenum articles for fiberglass and ceramics.
Feature 7 inch Color LCD , Touch screen Flow cell and Cuvette test mode compatible Real time curve showing 7 wavelength , 90 test item pre-programmed Memory for 10,000 sample results Light source hibernate function making lamp life longer RS232 interface, PC connecting
The traditional method of radiographic inspection for weld of oil and gas pipeline is to use radiographic source and film for transmission. However, with the improvement of quality control efficiency by the construction party, the method of film imaging can not meet the requirements of customers for efficiency. In addition, the film also has some problems, such as image processing, poor preservation, environmental pollution and so on. Based on this situation, HATATEST independently developed the PT360 pipeline weld DR automatic detection system. HATATEST Automatic DR Detection System for Pipeline Weld-PT360 is a kind of Automatic DR Detection robot who is similar with Transcan system in Russia, But HATATEST Automatic DR Detection System for Pipeline Weld-PT360 as the following highlights comparing with Russian Transcan : -- Aluminum alloy chain spider, light and easy to carry -- 400-1219 mm, any caliber can be used -- Battery drive, maximum working time 12 hours -- Software control (start and stop can be controlled manually by software, or automatic start and stop can be set) -- Single-arm or double-wall transillumination -- The whole installation process only takes 2 minutes -- Real time imaging, greatly improved detection efficient -- Image quality ISO 17636-2 Class B -- Adjust the fixed device of the radiation source according to the customer's requirements, and match different radio sources
Brief Introduction of the 30L rotary evaporator 30L rotary evaporator is a common laboratory equipment. It's consisted with motors, distillation flask, heating pots, receiving flask, condensers and so on. This device is mainly used for continuous distillation experiments under vacuum conditions. Our company designed 10L, 20L, 30L ,50L medium vacuum rotary vacuum evaporator for users to choose. Main Features of the RE-3002 rotary evaporator 1. The main frame of stainless steel and aluminum alloy 2. Polytetrafluoroethylene and imported fluororubber combined seal 3. The real-time display of the vacuum is up to 0.098Mpa 4. GG-17 glass,High temperature resistance, anticorrosion 5. Continuous feed
Brief Introduction of the Jacket Glass Reactor The series of reactor kettles is my company according to the actual requirements of customers and the standard production of new double glass reactor with cylindrical glass reactor body, which absorb the international and domestic advantages of similar products, while bold and innovative, not only easy to use one can easily move, , And the structure of innovative and practical, beautiful appearance generous, leading domestic; for modern chemistry, fine chemicals, bio pharmaceuticals, new materials, such as the synthesis of experimental and production of the ideal equipment. Specific specifications from 1L to 200L optional. The working principle of the series reactor: double layer glass reactor inside the reaction material, but also can be vacuum to do the stirring reaction; sandwich can be connected to heat water, water or hot oil or electric sets to do heating or cooling; The reaction solution was controlled to evaporate and reflux. Jacket Glass reactor principle is two parts, in the inner glass,the mix bar is continous stirring to make mixing or evaporating reaction under negative vacuum pressue. The stirring is under speed controlling. The jacketed glass could supply heating or cooling material to help the chemical reaction. Recently glass reactors has been widely used in chemical, biological and pharmaceutical experiment and prodcuction.
BENEMED BM-300E Automatic Electrolyte Analyzer for Hospital Lab ISE Laboratory Equipment Electrolyte Analyzer Bm-300e Features Throughput: 60 samples/hour Principle: ISE(Ion Selective Electrode) 5.6-inch color touch screen Auto sampling, washing, calibration Maintenance-free electrodes, 12 months lifespan Simple tubing system, easy maintenance CE marked Technical Specifications Sample type: Serum, etc. Sample volume:100-200�¼L Reagent consumption: 2 times sample volume Calibration: Automatic or On-demand Closed reagent, real time monitoring reagent Printer: Internal thermal printer Display: LCD Multiple language: English, Russian, etc. Storage: Up to 50,000 results Interface: RS-232, support LIS Working temperature:15-30 C Humidity: 20%-80% Dimension: 430 275 410mm Power: AC100~240V, 50/60 Hz, 80W Net weight :8 kg Reagent DS-I(NO.3) Standard A Standard B (390/160 mL) Cleaning Solution (250 mL) PVC Electrode Activating Solution PVC Electrode Activating Solution(50 mL) DS- Ref Ref. Filling Solution(10 mL) DS- ISE Filling Solution (10mL) Deprotein Solution (R1: Diluent 18mL/bottle 1; R2: Protease powder 100mg/bottle6)
BENEMED BM-200U Semi-auto Urine Analyzer for hospital lab Semi-Auto Urine Analyzer for Hospital Lab Customized Urine Strips Semi-Auto Urine Analyzer for Hospital Lab Customized Urine StripsSemi-Auto Urine Analyzer for Hospital Lab Customized Urine Strips Features: Test principle: Super-high lumimosity cold light sorce reflection Test parameters: VC, LEU, NIT, URO, PRO, PH, BLD, SG, KET, BIL, GLU Test speed: Up to 120 test/hour at Continuous Test Mode Memory Size: 1000 test result; 8, 10, 11, 14 compatible (optional) Absord the excess urine automatically, preventing from cross-inflection of urine Thermal Printer Inside, with outer stylus Printer interface PC connected with RS232 Data Communication Interface Baud Rate: 9600bps
3-part blood cell counter 20 parameters + 3 histograms 2 counting channels Up to 60 samples/hour 10.4â?³ large color LCD Built-in printer, USB port Stable, durable and economical
Feature: 7 inch Color LCD , Touch screen Flow cell and Cuvette test mode compatible Real time curve showing 7 wavelength , 90 test item pre-programmed Memory for 10,000 sample results Light source hibernate function making lamp life longer RS232 interface, PC connecting Test mode: Kinetic, End point, Two point, Absorbance
8 inches precision spin coater adopts all-aluminum alloy chamber, which is beautiful and sturdy in appearance; the upper cover of the chamber adopts 360�° visible plexiglass design, which is convenient for customers to observe the coating condition during use. The spin coater adopts advanced precision motor, the maximum speed can reach 10,000rpm, which effectively guarantees the uniformity of film formation. In addition, the instrument adopts touch screen control and can preset the coating curve, which greatly simplifies the use process and reduces the learning cost. It is very suitable for laboratory purchase. 8 inches precision spin coater application: The spin coater can coat liquid or colloidal materials on silicon wafers, crystals, quartz, ceramics and other substrates to form thin films. It is mainly used in photoresist spin coating, biological medium preparation, sol-gel method for polymer film production, etc.
The dual-target magnetron sputtering coating instrument is a small laboratory coating instrument with two targets developed by our company, which can be used to prepare single-layer or multi-layer ferroelectric thin films, conductive thin films, alloy thin films, semiconductor thin films, ceramic thin films , Dielectric film, optical film, etc. Compared with ordinary plasma sputtering, magnetron sputtering has the advantages of high energy and high speed. The coating rate is high and the sample temperature rise is low. It is a typical high-speed low-temperature sputtering. The magnetron target is equipped with a water-cooled interlayer. The water chiller can effectively take away the heat, avoid heat accumulation on the target surface, and make the magnetron coating work stably for a long time. Compared with similar equipment, this dual target magnetron sputtering coating instrument is not only widely used, but also small in size and easy to operate, it is an ideal equipment for preparing thin films in the laboratory.
Rotary evaporators, water circulating multi-purpose vacuum pumps, drying oven series, incubator series, furnaces.
