Short Description: CR -6062 Industrial grade fuel level transmitter (fuel level sensor) is a special instrument tailored for the accurate measurement of fuel level such as railway locomotive, automobile fuel tank, tank truck and fuel depot. The whole machine does not have any movable or elastic parts, and is resistant to impact, easy to install, high in reliability, high in precision, and good in performance and price. It can be installed in various occasions to accurately measure and control the fuel level of gasoline, diesel fuel and hydraulic fuel. It is also suitable for the measurement of various non-conductive liquids. Such products can also be used to measure conductive media in the case of particularly harsh on-site conditions, particularly severe electromagnetic interference, and particularly high agitation. Detection range: 0.05 -5m Accuracy: 0.1, 0.2, 0.5 Pressure range: -0.1MPa-32MPa Probe temperature resistance: -50 -250 Output signal: 4-20mA, 4-20mA superimposed HART communication, 485 communication, CAN bus communication Power supply voltage: 12-28VDC (Intrinsically safe type needs to be powered by safety barrier) Fixing method: Thread mounting M20�1.5,M27�2,M18�1.5,M16�1 Flange mounting DN25, DN40, DN50. Special specifications can be customized according to requirements Probe diameter: Φ 12 , Φ 16 , Φ 25 Explosion-proof grade: Intrinsic Exia II CT6 Explosion-proof Exd II CT5 Protection level: IP65 Intrinsic safety parameters: Ui : 28VDC , Ii : 93mA , Pi : 0.65W , Ci : 0.042uf , Li : 0mH CR -6062 industrial grade fuel level transmitter (fuel level sensor) for occasions CR -6062 Standard Fuel Level Transmitter (Fuel Level Sensor) Industrial grade, suitable for measurement of viscous fuel quality below 5MPA and temperature below 200, can be connected with various protocols CR -6062 Compact fuel level transmitter (fuel level sensor) Industrial grade, suitable for measurement below 5MPA, temperature less than 200, low viscosity fuel, can be connected with various protocols
Product model CR606S In order to simplify the users construction process, save installation time and reduce the users construction cost, we developed this digital fuel sensor with on-site interception. The sensor is supplied with several standard lengths at the factory. The user does not have to measure the fuel tank one by one, and the sensor is cut to the required length according to the actual height of the fuel tank at the installation site. After the sensor is cut off, the sealing plug is installed to reset the zero point and the full point, the sensor can work normally and the automatic calibration can be realized in the future operation. This technology is the first in the industry. Range description Adaptive point range:(max to min)226 type:70% to 30% 424 type: 50% to 30% Accuracy class: 226 type: ± 2.5% 424 type: ± 2.0 Aluminum tube Ï?16
Product Categories: Monitor accessories Place of Origin: Henan, China (Mainland) Brand Name: CSI Connectors: 6 pin Cable Material: Medical TPU Cable Color: Gray Cable Length: 0.9 meters MOQ:1 piece Certificate: CE, ISO13485 Warranty: 12 months Types: 1.Adult disposable spo2 sensor 2.Pediatric disposable spo2 sensor 3.Neonatal disposable spo2 sensor 4.Foreahead Spo2 Sensor Feature: Latex-free, double shielded, antistatic, low noise. Supply Ability:1000 Piece/Pieces per Week. Shipping and Packing: Delivery Time: 3-5 days Shipping: DHL/FedEx/EMS/UPS/TNT Packing: 1 piece pack into one PU bag, then pack inside a small carton box. Port: Shenzhen port, or as you need. Payment Terms: L/C,D/A,D/P,T/T,Western Union,Money Gram. Company Information: Henan Joysjoin Industrial Co., Ltd is the professional manufacturer and exporter for medical consumables, who has our own R&D team, production line and sales team. Our main products are spo2 sensor, ECG cables and lead wires, EKG cable and lead wires, IBP cables, NIBP cuffs, medical temperature probes, anesthetic breathing machine sensors and tubes and other consumables, which are widely used in medical devices such as patient monitors, fetal monitors, electrocardiographs, breathing machines, anesthesia machines, and ultrasonic machines. Welcome your inquiry, looking forward to cooperating with you. Our Services: 1. More competitive factory price. 2. Fast delivery (1-5 days, we are a manufacturer, have enough products in stock.) 3. Quality 100% assured (All products are made of medical TPU material) 4. Samples available (accept trial order) 5. One piece MOQ is acceptable. 6. OEM & ODM service. Main Products: 1.Reusable/ Disposable Spo2 Sensor 2.Spo2 Extension Cable 3.ECG/ EKG Cable with leadwires 4,ECG /EKG Trunk Cable 5.Temperature Probe 6.Fetal & TOCO Transducer 7.IBP Cable and Transducer 8.NIBP Cuff and hose FAQ: 1. Are you a trading company or a manufacturer with your own factory? We are a professional manufacturer with our own R&D team. 2. Can I have my own Logo on the product? Yes, your own drawing is welcomed. We can design and make your logo on the product, but the cost need to be paid by your side. 3. Can we visit your factory? Of course. Welcome to visit our factory. Our professional technicians are willing to show you more details of our products. 4.What kind of certificates do you have ? We are certified with CE and ISO13485. Its our duty to offer you high quality products with best service and the most competitive price. 5. When can you deliver products? It depends on the quantity. Most of our products are in stock. For common orders, we can arrange shipment immediately after we get your payment.
Product Categories: Monitor accessories Place of Origin: Henan, China (Mainland) Brand Name: GE Connectors: 9 pin Cable Material: Medical TPU Cable Color: Gray Cable Length: 0.9 meters MOQ:1 piece Certificate: CE, ISO13485 Warranty: 12 months Types: 1.Adult disposable spo2 sensor 2.Pediatric disposable spo2 sensor 3.Neonatal disposable spo2 sensor 4.Foreahead Spo2 Sensor Feature: Latex-free, double shielded, antistatic, low noise. Supply Ability:1000 Piece/Pieces per Week. Shipping and Packing: Delivery Time: 3-5 days Shipping: DHL/FedEx/EMS/UPS/TNT Packing: 1 piece pack into one PU bag, then pack inside a small carton box. Port: Shenzhen port, or as you need. Payment Terms: L/C,D/A,D/P,T/T,Western Union,Money Gram. Company Information: Henan Joysjoin Industrial Co., Ltd is the professional manufacturer and exporter for medical consumables, who has our own R&D team, production line and sales team. Our main products are spo2 sensor, ECG cables and lead wires, EKG cable and lead wires, IBP cables, NIBP cuffs, medical temperature probes, anesthetic breathing machine sensors and tubes and other consumables, which are widely used in medical devices such as patient monitors, fetal monitors, electrocardiographs, breathing machines, anesthesia machines, and ultrasonic machines. Welcome your inquiry, looking forward to cooperating with you. Our Services: 1. More competitive factory price. 2. Fast delivery (1-5 days, we are a manufacturer, have enough products in stock.) 3. Quality 100% assured (All products are made of medical TPU material) 4. Samples available (accept trial order) 5. One piece MOQ is acceptable. 6. OEM & ODM service. Main Products: 1.Reusable/ Disposable Spo2 Sensor 2.Spo2 Extension Cable 3.ECG/ EKG Cable with leadwires 4,ECG /EKG Trunk Cable 5.Temperature Probe 6.Fetal & TOCO Transducer 7.IBP Cable and Transducer 8.NIBP Cuff and hose FAQ: 1. Are you a trading company or a manufacturer with your own factory? We are a professional manufacturer with our own R&D team. 2. Can I have my own Logo on the product? Yes, your own drawing is welcomed. We can design and make your logo on the product, but the cost need to be paid by your side. 3. Can we visit your factory? Of course. Welcome to visit our factory. Our professional technicians are willing to show you more details of our products. 4.What kind of certificates do you have ? We are certified with CE and ISO13485. Its our duty to offer you high quality products with best service and the most competitive price. 5. When can you deliver products? It depends on the quantity. Most of our products are in stock. For common orders, we can arrange shipment immediately after we get your payment.
CR-6061-2 Capacitive Fuel Level Transmitter (Sensor) This sensor is a special product for lubricating fuel. It can be used for long-term operation in high temperature and high viscosity. It is tailored for accurate measurement of generator fuel level mechanical equipment. The whole machine does not have any movable or elastic parts, and is resistant to impact, easy to install, high in reliability, high in precision, and good in performance and price. It can be installed in various occasions to accurately measure and control the fuel level of gasoline, diesel fuel and hydraulic fuel. It is also suitable for the measurement of various non-conductive liquids. Such products can also be used to measure conductive media in the case of particularly harsh on-site conditions, particularly severe electromagnetic interference, and particularly high agitation. The core components of the product are converted into standard electrical signals (typically 4-20 mA) using an advanced RF capacitance detection circuit through a 16-bit microcontroller with precise temperature compensation and linear correction. Optional HART, CANBUS, 485 communication protocol for system configuration. The full range of transmitters are self-calibrating, allowing users to automatically calibrate zero and range with buttons or leads to suit different requirements in complex locations. Working principle The sensing part of the CR-6061-2 capacitive fuel level transmitter (sensor) is a coaxial container that causes a change in the capacitance between the sensor housing and the sensing electrode when the fuel enters the container. This variation is passed through the circuit. The conversion and accurate linear and temperature compensation, output 4-20mA standard signal to the display instrument. Performance Detection range: 0.05-5m Accuracy: 0.5 Pressure range: -0.1MPa-0.6MPa Probe temperature resistance: -50-100 Output signal: 4-20mA, 4-20mA superimposed HART communication, 485 communication, CAN bus communication Power supply voltage: 12-28VDC (intrinsic safety type needs to be powered by safety barrier) Fixing method: Thread mounting M20�1.5, M27�2, M18�1.5, M16�1 Flange mounting DN25, DN40, DN50. Special specifications can be customized according to requirements Probe diameter: Φ19, Explosion-proof grade: intrinsically safe ExiaIIC T6 flameproof ExdIIC T5 Protection level: IP65 Intrinsic safety parameters: Ui: 28VDC, Ii: 93mA, Pi: 0.65W, Ci: 0.042uf, Li: 0mH
Short Description: The CR6061 digital liquid level sensor is based on the principle of RF capacitance measurement. It uses tomography to dynamically analyze various parameters of the sensor in the medium, and automatically compensates accurately. The output signal changes linearly with the change of liquid level. The whole machine does not have any elastic parts and movable parts. It is resistant to impact and easy to install. It can be installed in various occasions to accurately measure the oil level of gasoline, diesel oil, hydraulic oil and other liquids of various corrosive liquids.
Product model CR606S In order to simplify the users construction process, save installation time and reduce the users construction cost, we developed this digital fuel sensor with on-site interception. The sensor is supplied with several standard lengths at the factory. The user does not have to measure the fuel tank one by one, and the sensor is cut to the required length according to the actual height of the fuel tank at the installation site. After the sensor is cut off, the sealing plug is installed to reset the zero point and the full point, the sensor can work normally and the automatic calibration can be realized in the future operation. This technology is the first in the industry. Range description Adaptive point range:(max to min)226 type:70% to 30% 424 type: 50% to 30% Accuracy class: 226 type: ± 2.5% 424 type: ± 2.0 Aluminum tube Ï?16 Truncate oil level sensor 424 type length listï¼?mmï¼?
CR-6061-3 universal automotive fuel level sensor uses tomography technology to dynamically analyze various parameters of the sensor in the medium, automatically refresh the reference value and accurately compensate. The same sensor can be changed at any time to change the measurement medium or change the installation environment. It can be automatically adapted and accurately measured without recalibration, and is not affected by dielectric constant and temperature changes. For example, after a CR-6061-3 automotive fuel level sensor is installed in a automotive , the automotive travels from the south of the country to the north, no matter how the fuel label is changed, or what additive is added, it can be accurately measured without recalibration. Its true oil level. And temperature, radio frequency interference and other factors have no effect on the sensor. CR-6061-3 type automobile oil level sensor can simultaneously output temperature signal from communication bus with accuracy of 0.1 Performance Detection range: 0.05-1m Accuracy: 0.1 level Pressure range: as required Probe diameter: Φ16 Supply voltage: 12-28VDC Medium temperature: -50-125 Output signal: 4-20mA, 0-5V, 0-10V, 485 communication, 232 communication, CAN bus communication Fixing method: Thread M20*1.5 or flange mounting, special specifications can be customized according to requirements Explosion-proof grade: intrinsically safe ExiaIIC T6 flameproof ExdIIC T5
The CR6061 digital liquid level sensor is based on the principle of RF capacitance measurement. It uses tomography to dynamically analyze various parameters of the sensor in the medium, and automatically compensates accurately. The output signal changes linearly with the change of liquid level. The whole machine does not have any elastic parts and movable parts. It is resistant to impact and easy to install. It can be installed in various occasions to accurately measure the oil level of gasoline, diesel oil, hydraulic oil and other liquids of various corrosive liquids.
Product Categories: Monitor accessories Place of Origin: Henan, China (Mainland) Brand Name: GE Model Number: J401-B(02BL) Cable Material: Medical TPU Cable Color: Black Cable Length: 1M/3M MOQ:1pc Certificate:CE, ISO13485 Warranty: 12 months Port:Shenzhen port, or as you need More details: Properties:Medical Materials & Accessories Tech Application:Pressure Sensor Feature: Latex-free, double shielded, antistatic, low noise Usage: Pressure Sensor, Direct spo2 sensor connected to the monitor, no need for extension cable. Paypal Supply Ability:1000 Piece/Pieces per Week. Shipping and Packing Delivery Time: 3-5 days Shipping: DHL/FedEx/EMS/UPS/TNT Packing: 1pcs pack into one PU bag, then pack inside a small carton box. Payment Terms:L/C,D/A,D/P,T/T,Western Union,Money Gram. Types of Patient Finger For Your Choice: 1. Adult finger clip 2. Adult silicone soft tip 3. Pediatric finger clip 4. Pediatric silicone soft tip 5. Infant silicone soft tip 6. Neonate silicone wrap 7. Neonate "Y" type 8. Adult ear clip Company Information: Henan Joysjoin Industrial Co., Ltd is the professional manufacturer and exporter for medical consumables, who has our own R&D team, production line and sales team.Our main products are spo2 sensor, ECG cables and lead wires, EKG cable and lead wires, IBP cables, NIBP cuffs, medical temperature probes, anesthetic breathing machine sensors and tubes and other consumables, which are widely used in medical devices such as patient monitors, fetal monitors, electrocardiographs, breathing machines, anesthesia machines, and ultrasonic machines. Welcome your inquiry, looking forward to cooperating with you . Our Services: 1. More competitive factory price. 2. Fast delivery (1-5 days, we are a manufacturer, have enough products in stock.) 3. Quality 100% assured (All products are made of medical TPU material) 4. Samples available (accept trail order) 5. One piece MOQ is acceptable. 6. OEM & ODM service. FAQ: 1. Are you a trading company or a manufacturer with your own factory? We are a professional manufacturer with our own R&D team. 2. Can I have my own Logo on the product? Yes, your own drawing is welcomed. We can design and make your logo on the product, but the cost need to be paid by your side. 3. Can we visit your factory? Of course. Welcome to visit our factory. Our professional technicians are willing to show you more details of our products. 4.What kind of certificates do you have ? We are certified with CE and ISO13485. Its our duty to offer you high quality products with best service and the most competitive price. 5. When can you deliver products? It depends on the quantity. Most of our products are in stock. For common orders, we can arrange shipment immediately after we get your payment.
Product Categories: Monitor accessories Place of Origin: Henan, China (Mainland) Brand Name: Nihon Kohden Model Number: J401-A(05AL) Type: Adult finger clip Cable Material: Medical TPU Cable Color: Blue Cable Length: 1M/3M MOQ:1pc Certificate:CE, ISO13485 Warranty: 12 months More details: Properties:Medical Materials & Accessories Feature: Latex-free, double shielded, antistatic, low noise Usage: Pressure Sensor, Direct spo2 sensor connected to the monitor, no need for extension cable. Paypal Supply Ability:1000 Piece/Pieces per Week Shipping and Packing Delivery Time: 3-5 days Shipping: DHL/FedEx/EMS/UPS/TNT Port:Shenzhen port, or as you need. Packing: 1pcs pack into one PU bag, then pack inside a small carton box. Payment Terms:L/C,D/A,D/P,T/T,Western Union,Money Gram. Types of Patient Finger For Your Choice: 1. Adult finger clip 2. Adult silicone soft tip 3. Pediatric finger clip 4. Pediatric silicone soft tip 5. Infant silicone soft tip 6. Neonate silicone wrap 7. Neonate "Y" type 8. Adult ear clip Company Information: Henan Joysjoin Industrial Co., Ltd is the professional manufacturer and exporter for medical consumables, who has our own R&D team, production line and sales team.Our main products are spo2 sensor, ECG cables and lead wires, EKG cable and lead wires, IBP cables, NIBP cuffs, medical temperature probes, anesthetic breathing machine sensors and tubes and other consumables, which are widely used in medical devices such as patient monitors, fetal monitors, electrocardiographs, breathing machines, anesthesia machines, and ultrasonic machines. Welcome your inquiry, looking forward to cooperating with you ! Our Services: 1. More competitive factory price. 2. Fast delivery (1-5 days, we are a manufacturer, have enough products in stock.) 3. Quality 100% assured (All products are made of medical TPU material) 4. Samples available (accept trail order) 5. One piece MOQ is acceptable. 6. OEM & ODM service.
Product Categories: Monitor accessories Place of Origin: Henan, China (Mainland) Brand Name: Nonin Model Number: J401-A(21CL) Type: Adult finger clip Cable Material: Medical TPU Cable Color: Black Cable Length: 1M/3M MOQ:1pc Certificate:CE, ISO13485 Warranty: 12 months More details: Properties:Medical Materials & Accessories Tech Application:Pressure Sensor Feature: Latex-free, double shielded, antistatic, low noise Usage: Pressure Sensor, Direct spo2 sensor connected to the monitor, no need for extension cable. Paypal Supply Ability:1000 Piece/Pieces per Week Shipping and Packing Delivery Time: 3-5 days Port:Shenzhen port, or as you need Shipping: DHL/FedEx/EMS/UPS/TNT Packing: 1pcs pack into one PU bag, then pack inside a small carton box. Payment Terms:L/C,D/A,D/P,T/T,Western Union,Money Gram. Types of Patient Finger For Your Choice: 1. Adult finger clip 2. Adult silicone soft tip 3. Pediatric finger clip 4. Pediatric silicone soft tip 5. Infant silicone soft tip 6. Neonate silicone wrap 7. Neonate "Y" type 8. Adult ear clip Company Information: Henan Joysjoin Industrial Co., Ltd is the professional manufacturer and exporter for medical consumables, who has our own R&D team, production line and sales team.Our main products are spo2 sensor, ECG cables and lead wires, EKG cable and lead wires, IBP cables, NIBP cuffs, medical temperature probes, anesthetic breathing machine sensors and tubes and other consumables, which are widely used in medical devices such as patient monitors, fetal monitors, electrocardiographs, breathing machines, anesthesia machines, and ultrasonic machines. Welcome your inquiry, looking forward to cooperating with you ! Our Services: 1. More competitive factory price. 2. Fast delivery (1-5 days, we are a manufacturer, have enough products in stock.) 3. Quality 100% assured (All products are made of medical TPU material) 4. Samples available (accept trail order) 5. One piece MOQ is acceptable. 6. OEM & ODM serviceã?? Main Products: 1.Reusable/ Disposable Spo2 Sensor 2.Spo2 Extension Cable 3.ECG/ EKG Cable with leadwires 4,ECG /EKG Trunk Cable 5.Temperature Probe 6.Fetal & TOCO Transducer 7.IBP Cable and Transducer 8.NIBP Cuff and hose
The SpO2(Pulse Oxygen Saturation) sensor uses two emitting LEDs, one in the red region and the other in the infrared region of the spectrum. It uses red and infrared light sensors to detect your oxygen levels, sensing changes in those levels. It measures the volume of oxygen based on the way the light passes through your finger and delivers the data to the device's screen, which will tell you the percentage of oxygen in your blood with +/- 1% accuracy. Product Categories: Monitor accessories Place of Origin: Henan, China (Mainland) Brand Name: Datex Cable Material: Medical TPU Cable Length: 3M MOQ:1pc Warranty: 12 months Port:Shenzhen port, or as you need Feature: Latex-free, double shielded, antistatic, low noise Paypal Supply Ability:1000 Piece/Pieces per Week Payment Terms:L/C,D/A,D/P,T/T,Western Union,Money Gram Delivery Time: 3-5 days Shipping: DHL/FedEx/EMS/UPS/TNT Packing: 1pcs pack into one PU bag, then pack inside a small carton box.
Properties:Medical Materials & Accessories Place of Origin:Henan China Brand Name:Nellcor Instrument classification:Class II Type:Adult Finger Clip Connectors:7pin Cable Length:1M/3M Material:Medical TPU Warranty:12 Months Port:Shenzhen port, or as you need Payment Terms:L/C,D/A,D/P,T/T,Western Union,Money Gram, Paypal Supply Ability:1000 Piece/Pieces per Week Reusable Nellcor DS-100A Non-Oximax Adult Spo2 Sensor Delivery Time: 3-5 days Shipping: DHL/FedEx/EMS/UPS/TNT Packaging Detail:1pcs pack into one PU bag, then pack inside a small carton box
I.Description: The SpO2(Pulse Oxygen Saturation) sensor uses two emitting LEDs, one in the red region and the other in the infrared region of the spectrum. It uses red and infrared light sensors to detect your oxygen levels, sensing changes in those levels. It measures the volume of oxygen based on the way the light passes through your finger and delivers the data to the device's screen, which will tell you the percentage of oxygen in your blood with +/- 1% accuracy. II.Quick details: Product Categories: Monitor accessories Place of Origin: Henan, China (Mainland) Brand Name: Datex Type: Adult finger clip Cable Material: Medical TPU Cable Length: 3M MOQ:1pc Warranty: 12 months Paypal Supply Ability:1000 Piece/Pieces per Week Feature: Latex-free, double shielded, antistatic, low noise Usage: Pressure Sensor, Direct spo2 sensor connected to the monitor, no need for extension cable. III.Shipping and Packing: Delivery Time: 3-5 days Port:Shenzhen port, or as you need. Shipping: DHL/FedEx/EMS/UPS/TNT Packing: 1pcs pack into one PU bag, then pack inside a small carton box. IV.Types of Patient Finger For Your Choice: 1. Adult finger clip 2. Adult silicone soft tip 3. Pediatric finger clip 4. Pediatric silicone soft tip 5. Infant silicone soft tip 6. Neonate silicone wrap 7. Neonate "Y" type 8. Adult ear clip V.Our Services: 1. More competitive factory price. 2. Fast delivery (1-5 days, we are a manufacturer, have enough products in stock.) 3. Quality 100% assured (All products are made of medical TPU material) 4. Samples available (accept trail order) 5. One piece MOQ is acceptable. 6. OEM & ODM service VI.Contact Us: Henan Joysjoin Industrial Co., Ltd. Email:amanda@joysjoin.com Contact Person: Amanda Qu Whatsapp/Wechat/Skype No: +86 185 3816 2230
CR -6062 Industrial grade fuel level transmitter (fuel level sensor) is a special instrument tailored for the accurate measurement of fuel level such as railway locomotive, automobile fuel tank, tank truck and fuel depot. The whole machine does not have any movable or elastic parts, and is resistant to impact, easy to install, high in reliability, high in precision, and good in performance and price. It can be installed in various occasions to accurately measure and control the fuel level of gasoline, diesel fuel and hydraulic fuel. It is also suitable for the measurement of various non-conductive liquids. Such products can also be used to measure conductive media in the case of particularly harsh on-site conditions, particularly severe electromagnetic interference, and particularly high agitation. The CR-6062 industrial grade fuel level transmitter (fuel level sensor) core components are converted to standard electrical signals (typically 4-20 mA) using advanced RF capacitance sensing circuits through 16-bit microcontrollers with precise temperature compensation and linear correction. Optional HART, CANBUS, 485 communication protocol for system configuration. The full range of transmitters are self-calibrating, allowing users to automatically calibrate zero and range with two buttons or two leads to suit different requirements in complex locations. CR -6062 Industrial Grade Fuel Level Transmitter (Fuel Level Sensor) Working Principle The sensing part of the CR-6062 industrial grade fuel level transmitter (fuel level sensor) is a coaxial container that causes a change in the capacitance between the sensor housing and the sensing electrode when the fuel enters the container. This variation is passed through the circuit. The conversion is performed with precise linear and temperature compensation, and a 4-20 mA standard signal is output to the display meter. CR -6062 Industrial Grade Fuel Level Transmitter (Fuel Level Sensor) Performance Specifications Detection range: 0.05 -5m Accuracy: 0.1, 0.2, 0.5 Pressure range: -0.1MPa-32MPa Probe temperature resistance: -50 -250 Output signal: 4-20mA, 4-20mA superimposed HART communication, 485 communication, CAN bus communication Power supply voltage: 12-28VDC (Intrinsically safe type needs to be powered by safety barrier) Fixing method: Thread mounting M20�1.5,M27�2,M18�1.5,M16�1 Flange mounting DN25, DN40, DN50. Special specifications can be customized according to requirements Probe diameter: Φ 12 , Φ 16 , Φ 25 Explosion-proof grade: Intrinsic Exia II CT6 Explosion-proof Exd II CT5 Protection level: IP65 Intrinsic safety parameters: Ui : 28VDC , Ii : 93mA , Pi : 0.65W , Ci : 0.042uf , Li : 0mH
CR-6061-3 universal automotive fuel level sensor uses tomography technology to dynamically analyze various parameters of the sensor in the medium, automatically refresh the reference value and accurately compensate. The same sensor can be changed at any time to change the measurement medium or change the installation environment. It can be automatically adapted and accurately measured without recalibration, and is not affected by dielectric constant and temperature changes. For example, after a CR-6061-3 automotive fuel level sensor is installed in a automotive , the automotive travels from the south of the country to the north, no matter how the fuel label is changed, or what additive is added, it can be accurately measured without recalibration. Its true oil level. And temperature, radio frequency interference and other factors have no effect on the sensor. CR-6061-3 type automobile oil level sensor can simultaneously output temperature signal from communication bus with accuracy of 0.1 Performance Detection range: 0.05-1m Accuracy: 0.1 level Pressure range: as required Probe diameter: Φ16 Supply voltage: 12-28VDC Medium temperature: -50-125 Output signal: 4-20mA, 0-5V, 0-10V, 485 communication, 232 communication, CAN bus communication Fixing method: Thread M20*1.5 or flange mounting, special specifications can be customized according to requirements Explosion-proof grade: intrinsically safe ExiaIIC T6 flameproof ExdIIC T5
CR-6061-2 Capacitive Fuel Level Transmitter (Sensor) This sensor is a special product for lubricating fuel. It can be used for long-term operation in high temperature and high viscosity. It is tailored for accurate measurement of generator fuel level mechanical equipment. The whole machine does not have any movable or elastic parts, and is resistant to impact, easy to install, high in reliability, high in precision, and good in performance and price. It can be installed in various occasions to accurately measure and control the fuel level of gasoline, diesel fuel and hydraulic fuel. It is also suitable for the measurement of various non-conductive liquids. Such products can also be used to measure conductive media in the case of particularly harsh on-site conditions, particularly severe electromagnetic interference, and particularly high agitation. The core components of the product are converted into standard electrical signals (typically 4-20 mA) using an advanced RF capacitance detection circuit through a 16-bit microcontroller with precise temperature compensation and linear correction. Optional HART, CANBUS, 485 communication protocol for system configuration. The full range of transmitters are self-calibrating, allowing users to automatically calibrate zero and range with buttons or leads to suit different requirements in complex locations. Working principle The sensing part of the CR-6061-2 capacitive fuel level transmitter (sensor) is a coaxial container that causes a change in the capacitance between the sensor housing and the sensing electrode when the fuel enters the container. This variation is passed through the circuit. The conversion and accurate linear and temperature compensation, output 4-20mA standard signal to the display instrument. Performance Detection range: 0.05-5m Accuracy: 0.5 Pressure range: -0.1MPa-0.6MPa Probe temperature resistance: -50-100 Output signal: 4-20mA, 4-20mA superimposed HART communication, 485 communication, CAN bus communication Power supply voltage: 12-28VDC (intrinsic safety type needs to be powered by safety barrier) Fixing method: Thread mounting M201.5, M272, M181.5, M161 Flange mounting DN25, DN40, DN50. Special specifications can be customized according to requirements Probe diameter: 19, Explosion-proof grade: intrinsically safe ExiaIIC T6 flameproof ExdIIC T5 Protection level: IP65 Intrinsic safety parameters: Ui: 28VDC, Ii: 93mA, Pi: 0.65W, Ci: 0.042uf, Li: 0mH
Surge suppressor 20-5000 0.27KG 18*14*45(CM)
Lighting arrestor 10-10000 2.3kg 49*20*7(CM)
