CR-6061-2 Capacitive Fuel Level Transmitter (Sensor) This sensor is a special product for lubricating fuel. It can be used for long-term operation in high temperature and high viscosity. It is tailored for accurate measurement of generator fuel level mechanical equipment.
The whole machine does not have any movable or elastic parts, and is resistant to impact, easy to install, high in reliability, high in precision, and good in performance and price. It can be installed in various occasions to accurately measure and control the fuel level of gasoline, diesel fuel and hydraulic fuel. It is also suitable for the measurement of various non-conductive liquids. Such products can also be used to measure conductive media in the case of particularly harsh on-site conditions, particularly severe electromagnetic interference, and particularly high agitation.
The core components of the product are converted into standard electrical signals (typically 4-20 mA) using an advanced RF capacitance detection circuit through a 16-bit microcontroller with precise temperature compensation and linear correction. Optional HART, CANBUS, 485 communication protocol for system configuration. The full range of transmitters are self-calibrating, allowing users to automatically calibrate zero and range with buttons or leads to suit different requirements in complex locations.
Working principle
The sensing part of the CR-6061-2 capacitive fuel level transmitter (sensor) is a coaxial container that causes a change in the capacitance between the sensor housing and the sensing electrode when the fuel enters the container. This variation is passed through the circuit. The conversion and accurate linear and temperature compensation, output 4-20mA standard signal to the display instrument.
Performance
Detection range: 0.05-5m
Accuracy: 0.5
Pressure range: -0.1MPa-0.6MPa
Probe temperature resistance: -50-100
Output signal: 4-20mA, 4-20mA superimposed HART communication,
485 communication, CAN bus communication
Power supply voltage: 12-28VDC (intrinsic safety type needs to be powered by safety barrier)
Fixing method: Thread mounting M201.5, M272, M181.5, M161
Flange mounting DN25, DN40, DN50.
Special specifications can be customized according to requirements
Probe diameter: 19,
Explosion-proof grade: intrinsically safe ExiaIIC T6 flameproof ExdIIC T5
Protection level: IP65
Intrinsic safety parameters: Ui: 28VDC, Ii: 93mA, Pi: 0.65W, Ci: 0.042uf, Li: 0mH
CR-6061-2 Capacitive Fuel Level Transmitter (Sensor) This sensor is a special product for lubricating fuel. It can be used for long-term operation in high temperature and high viscosity. It is tailored for accurate measurement of generator fuel level mechanical equipment. The whole machine does not have any movable or elastic parts, and is resistant to impact, easy to install, high in reliability, high in precision, and good in performance and price. It can be installed in various occasions to accurately measure and control the fuel level of gasoline, diesel fuel and hydraulic fuel. It is also suitable for the measurement of various non-conductive liquids. Such products can also be used to measure conductive media in the case of particularly harsh on-site conditions, particularly severe electromagnetic interference, and particularly high agitation. The core components of the product are converted into standard electrical signals (typically 4-20 mA) using an advanced RF capacitance detection circuit through a 16-bit microcontroller with precise temperature compensation and linear correction. Optional HART, CANBUS, 485 communication protocol for system configuration. The full range of transmitters are self-calibrating, allowing users to automatically calibrate zero and range with buttons or leads to suit different requirements in complex locations. Working principle The sensing part of the CR-6061-2 capacitive fuel level transmitter (sensor) is a coaxial container that causes a change in the capacitance between the sensor housing and the sensing electrode when the fuel enters the container. This variation is passed through the circuit. The conversion and accurate linear and temperature compensation, output 4-20mA standard signal to the display instrument. Performance Detection range: 0.05-5m Accuracy: 0.5 Pressure range: -0.1MPa-0.6MPa Probe temperature resistance: -50-100 Output signal: 4-20mA, 4-20mA superimposed HART communication, 485 communication, CAN bus communication Power supply voltage: 12-28VDC (intrinsic safety type needs to be powered by safety barrier) Fixing method: Thread mounting M20�1.5, M27�2, M18�1.5, M16�1 Flange mounting DN25, DN40, DN50. Special specifications can be customized according to requirements Probe diameter: Φ19, Explosion-proof grade: intrinsically safe ExiaIIC T6 flameproof ExdIIC T5 Protection level: IP65 Intrinsic safety parameters: Ui: 28VDC, Ii: 93mA, Pi: 0.65W, Ci: 0.042uf, Li: 0mH
Supplier: All type clothes, urea, all type agriculture and food items, all personal and entertainment items, all industrial and automotive items, all construction household and furnishing, all computers electronics and electrical, handicraft, items, npk, fertilizers t shirt, blanket,dry fruits, animal feeds, towel, bedsheets, toys, all grocery, copper wire scrap, copper ore concentrate, zinc ore concentrate, lead concentrate, fly ash, a4 paper, a3 paper, craft paper, occ, ldpe, hdpe , pvc resin, petroleum products, jp54, jet a1, crude oil, blco , biodiesel, diesel, fuel, coal, d2, petcock, pulses, mustard oil, spices , sanitizer, gloves, medical products, cement, core sand, old ships lng, lpg, all groceries items, food products, hms1 and hms2, fish, chicken feet, chicken paws, agri & food processing agriculture products, fertilizers, seeds, farm products grains, fruits, vegetables, river sands, aggregates, pvc electrical wire, rice, charcoal, wheat flour
Services: Export, import, merchant export import
Buyer: All metals, minerals, petroleum products, food products and paper products
CR-6061-3 universal automotive fuel level sensor uses tomography technology to dynamically analyze various parameters of the sensor in the medium, automatically refresh the reference value and accurately compensate. The same sensor can be changed at any time to change the measurement medium or change the installation environment. It can be automatically adapted and accurately measured without recalibration, and is not affected by dielectric constant and temperature changes. For example, after a CR-6061-3 automotive fuel level sensor is installed in a automotive , the automotive travels from the south of the country to the north, no matter how the fuel label is changed, or what additive is added, it can be accurately measured without recalibration. Its true oil level. And temperature, radio frequency interference and other factors have no effect on the sensor. Performance Detection range: 0.05-1m Accuracy: 0.1 level Pressure range: as required Probe diameter: 16 Supply voltage: 12-28VDC Medium temperature: -50-125 Output signal: 4-20mA, 0-5V, 0-10V, 485 communication, 232 communication, CAN bus communication Fixing method: Thread M20*1.5 or flange mounting, special specifications can be customized according to requirements Explosion-proof grade: intrinsically safe ExiaIIC T6 flameproof ExdIIC T5
CR-6061-3 universal automotive fuel level sensor uses tomography technology to dynamically analyze various parameters of the sensor in the medium, automatically refresh the reference value and accurately compensate. The same sensor can be changed at any time to change the measurement medium or change the installation environment. It can be automatically adapted and accurately measured without recalibration, and is not affected by dielectric constant and temperature changes. For example, after a CR-6061-3 automotive fuel level sensor is installed in a automotive , the automotive travels from the south of the country to the north, no matter how the fuel label is changed, or what additive is added, it can be accurately measured without recalibration. Its true oil level. And temperature, radio frequency interference and other factors have no effect on the sensor. CR-6061-3 type automobile oil level sensor can simultaneously output temperature signal from communication bus with accuracy of 0.1 Performance Detection range: 0.05-1m Accuracy: 0.1 level Pressure range: as required Probe diameter: Φ16 Supply voltage: 12-28VDC Medium temperature: -50-125 Output signal: 4-20mA, 0-5V, 0-10V, 485 communication, 232 communication, CAN bus communication Fixing method: Thread M20*1.5 or flange mounting, special specifications can be customized according to requirements Explosion-proof grade: intrinsically safe ExiaIIC T6 flameproof ExdIIC T5
CR-6061-3 universal automotive fuel level sensor uses tomography technology to dynamically analyze various parameters of the sensor in the medium, automatically refresh the reference value and accurately compensate. The same sensor can be changed at any time to change the measurement medium or change the installation environment. It can be automatically adapted and accurately measured without recalibration, and is not affected by dielectric constant and temperature changes. For example, after a CR-6061-3 automotive fuel level sensor is installed in a automotive , the automotive travels from the south of the country to the north, no matter how the fuel label is changed, or what additive is added, it can be accurately measured without recalibration. Its true oil level. And temperature, radio frequency interference and other factors have no effect on the sensor. CR-6061-3 type automobile oil level sensor can simultaneously output temperature signal from communication bus with accuracy of 0.1 Performance Detection range: 0.05-1m Accuracy: 0.1 level Pressure range: as required Probe diameter: Φ16 Supply voltage: 12-28VDC Medium temperature: -50-125 Output signal: 4-20mA, 0-5V, 0-10V, 485 communication, 232 communication, CAN bus communication Fixing method: Thread M20*1.5 or flange mounting, special specifications can be customized according to requirements Explosion-proof grade: intrinsically safe ExiaIIC T6 flameproof ExdIIC T5
CR-6061-3 universal automotive fuel level sensor uses tomography technology to dynamically analyze various parameters of the sensor in the medium, automatically refresh the reference value and accurately compensate. The same sensor can be changed at any time to change the measurement medium or change the installation environment. It can be automatically adapted and accurately measured without recalibration, and is not affected by dielectric constant and temperature changes. For example, after a CR-6061-3 automotive fuel level sensor is installed in a automotive , the automotive travels from the south of the country to the north, no matter how the fuel label is changed, or what additive is added, it can be accurately measured without recalibration. Its true oil level. And temperature, radio frequency interference and other factors have no effect on the sensor. CR-6061-3 type automobile oil level sensor can simultaneously output temperature signal from communication bus with accuracy of 0.1 Performance Detection range: 0.05-1m Accuracy: 0.1 level Pressure range: as required Probe diameter: Φ16 Supply voltage: 12-28VDC Medium temperature: -50-125 Output signal: 4-20mA, 0-5V, 0-10V, 485 communication, 232 communication, CAN bus communication Fixing method: Thread M20*1.5 or flange mounting, special specifications can be customized according to requirements Explosion-proof grade: intrinsically safe ExiaIIC T6 flameproof ExdIIC T5
Supplier: Steel scrap, rails for rerolling, shredded 210/211, hms 1 and 2 80/20, hms 1, steel turning, tire wire
Supplier: Wireless charger, batteries power bank, dust sensor, optical disc drive, tof, lidar, ar glass
Supplier: 1) plastic injection molded parts
2) mould design and development
3) automotive plastic parts
4) auto electrical parts
5) industrial/automotive battery parts
6) plastic household products
7) gear moulding
8) over moulding
9) insert moulding
Buyer: 1) copper plated/tin plated terminals for auto electrical parts.
